| Age | Commit message (Collapse) | Author |
|---|
|
Pull XArray updates from Matthew Wilcox:
"This pull request changes the xa_alloc() API. I'm only aware of one
subsystem that has started trying to use it, and we agree on the fixup
as part of the merge.
The xa_insert() error code also changed to match xa_alloc() (EEXIST to
EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual
bugfixes, optimisations and tweaking.
I now have a git tree with all users of the radix tree and IDR
converted over to the XArray that I'll be feeding to maintainers over
the next few weeks"
* tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix xa_reserve for 2-byte aligned entries
XArray: Fix xa_erase of 2-byte aligned entries
XArray: Use xa_cmpxchg to implement xa_reserve
XArray: Fix xa_release in allocating arrays
XArray: Mark xa_insert and xa_reserve as must_check
XArray: Add cyclic allocation
XArray: Redesign xa_alloc API
XArray: Add support for 1s-based allocation
XArray: Change xa_insert to return -EBUSY
XArray: Update xa_erase family descriptions
XArray tests: RCU lock prohibits GFP_KERNEL
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
|
|
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
|
|
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur. Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.
cpu 0 (context cleanup)
rc->ref_count-- (ref_count == 0)
hfi1_rcd_free()
cpu 1 (IRQ (with rcd index))
rcd_get_by_index()
lock
ref_count+++ <-- reference count race (WARNING)
return rcd
unlock
cpu 0
hfi1_free_ctxtdata() <-- incorrect free location
lock
remove rcd from array
unlock
free rcd
This race will cause the following WARNING trace:
WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
Call Trace:
dump_stack+0x19/0x1b
__warn+0xd8/0x100
warn_slowpath_null+0x1d/0x20
hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
is_rcv_urgent_int+0x24/0x90 [hfi1]
general_interrupt+0x1b6/0x210 [hfi1]
__handle_irq_event_percpu+0x44/0x1c0
handle_irq_event_percpu+0x32/0x80
handle_irq_event+0x3c/0x60
handle_edge_irq+0x7f/0x150
handle_irq+0xe4/0x1a0
do_IRQ+0x4d/0xf0
common_interrupt+0x162/0x162
The race can also lead to a use after free which could be similar to:
general protection fault: 0000 1 SMP
CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230
Call Trace:
? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_aio_write+0xba/0x110 [hfi1]
do_sync_readv_writev+0x7b/0xd0
do_readv_writev+0xce/0x260
? handle_mm_fault+0x39d/0x9b0
? pick_next_task_fair+0x5f/0x1b0
? sched_clock_cpu+0x85/0xc0
? __schedule+0x13a/0x890
vfs_writev+0x35/0x60
SyS_writev+0x7f/0x110
system_call_fastpath+0x22/0x27
Use the appropriate kref API to verify access.
Reorder context cleanup to ensure context removal before cleanup occurs
correctly.
Cc: stable@vger.kernel.org # v4.14.0+
Fixes: f683c80ca68e ("IB/hfi1: Resolve kernel panics by reference counting receive contexts")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The previous attempted bug fix overlooked the fact that
ib_umem_odp_map_dma_single_page() was doing a put_page() upon hitting an
error. So there was not really a bug there.
Therefore, this reverts the off-by-one change, but keeps the change to use
release_pages() in the error path.
Fixes: 75a3e6a3c129 ("RDMA/umem: minor bug fix in error handling path")
Suggested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.
All these places for replacement were found by running the following
grep patterns on the entire kernel code. Please let me know if this
might have missed some instances. This might also have replaced some
false positives. I will appreciate suggestions, inputs and review.
1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"
This patch (of 2):
At present there are multiple places where invalid node number is
encoded as -1. Even though implicitly understood it is always better to
have macros in there. Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE. This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.
Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Bug fix: fix an off by one error in the code that cleans up if it fails
to dma-map a page, after having done a get_user_pages_remote() on a
range of pages.
2. Refinement: for that same cleanup code, release_pages() is better than
put_page() in a loop.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The the below commit, hns_roce_v2_modify_qp is called inside spinlock
while using GFP_KERNEL. Change it to GFP_ATOMIC.
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In function `c4iw_dealloc_mw`, variable mhp's value is printed after
freed, it is clearer to have the print before the kfree.
Otherwise racing threads could allocate another mhp with the same pointer
value and create confusing tracing.
Signed-off-by: Shaobo He <shaobo@cs.utah.edu>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The RC/UC code path can go through a software loopback. In this code path
the receive side QP is manipulated.
If two threads are working on the QP receive side (i.e. post_send, and
modify_qp to an error state), QP information can be corrupted.
(post_send via loopback)
set r_sge
loop
update r_sge
(modify_qp)
take r_lock
update r_sge <---- r_sge is now incorrect
(post_send)
update r_sge <---- crash, etc.
...
This can lead to one of the two following crashes:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: hfi1_copy_sge+0xf1/0x2e0 [hfi1]
PGD 8000001fe6a57067 PUD 1fd9e0c067 PMD 0
Call Trace:
ruc_loopback+0x49b/0xbc0 [hfi1]
hfi1_do_send+0x38e/0x3e0 [hfi1]
_hfi1_do_send+0x1e/0x20 [hfi1]
process_one_work+0x17f/0x440
worker_thread+0x126/0x3c0
kthread+0xd1/0xe0
ret_from_fork_nospec_begin+0x21/0x21
or:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: rvt_clear_mr_refs+0x45/0x370 [rdmavt]
PGD 80000006ae5eb067 PUD ef15d0067 PMD 0
Call Trace:
rvt_error_qp+0xaa/0x240 [rdmavt]
rvt_modify_qp+0x47f/0xaa0 [rdmavt]
ib_security_modify_qp+0x8f/0x400 [ib_core]
ib_modify_qp_with_udata+0x44/0x70 [ib_core]
modify_qp.isra.23+0x1eb/0x2b0 [ib_uverbs]
ib_uverbs_modify_qp+0xaa/0xf0 [ib_uverbs]
ib_uverbs_write+0x272/0x430 [ib_uverbs]
vfs_write+0xc0/0x1f0
SyS_write+0x7f/0xf0
system_call_fastpath+0x1c/0x21
Fix by using the appropriate locking on the receiving QP.
Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Cc: <stable@vger.kernel.org> #v4.9+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The IBTA spec notes:
o9-5.2.1: For any HCA which supports SEND with Invalidate, upon receiving
an IETH, the Invalidate operation must not take place until after the
normal transport header validation checks have been successfully
completed.
The rdmavt loopback code does the validation after the invalidate.
Fix by relocating the operation specific logic for all SEND variants until
after the validity checks.
Cc: <stable@vger.kernel.org> #v4.20+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid
future mismatch between types, define dma_nents as an integer instead of
unsigned.
Fixes: 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The write access of an implicit MR is inherited to all of its children.
Therefore we must set the correct write access to the parent MR.
Pass full access_flags when creating umem to let it calculate write access
correctly.
Fixes: da6a496a34f2 ("IB/mlx5: Ranges in implicit ODP MR inherit its write access")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Kernel space provider driver should clean the CQs belonging to kernel
space consumers only. The current implementation is doing reverse of it.
Fixing the same by avoiding the call to __clean_cq on a kernel qp during
destroy.
Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl")
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Being able to build devlink as a module causes growing pains.
First all drivers had to add a meta dependency to make sure
they are not built in when devlink is built as a module. Now
we are struggling to invoke ethtool compat code reliably.
Make devlink code built-in, users can still not build it at
all but the dynamically loadable module option is removed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to call kfree(pd) because ib_dealloc_pd() internally
frees PD.
Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.
The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.
However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the PD conversion patch, do the same for ucontext allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The first parameter of WARN_ONCE() is a condition, then following
parameters are the message. In this case, we left out the condition so it
will just print the ops->type string.
Fixes: 3856ec4b93c9 ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
While adding the use of for_each_sg_dma_page iterator for Brodcom's rdma
driver, there was a regression added in the __alloc_pbl path. The change
left bnxt_re in DOA state in for-next branch.
Fixing the regression to avoid the host crash when a user space object is
created. Restricting the unconditional access to hwq.pg_arr when hwq is
initialized for user space objects.
Fixes: 161ebe2498d4 ("RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL")
Reported-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.
During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed
The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.
64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.
When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:
cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469
Note that the active/passive side is equally distributed between the
two nodes.
Enabling pr_debug in cm.c gives tons of:
[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!
By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:
cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47
Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.
Adjustment of the CMA timeout is not part of this commit.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
It is possible that during a page fault handling, the process that owns
the MR is terminating. The indication for it is failure to get the
task_struct or take reference on the mm_struct. In this case just abort
the page-fault handler with error but without a warning to the kernel log.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When prefetching odp mr it is required to verify that pd of the mr is
identical to the pd for which the advise_mr request arrived with.
This check was missing from synchronous flow and is added now.
Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When deferring a prefetch request we need to protect against MR or PD
being destroyed while the request is still enqueued.
The first step is to validate that PD owns the lkey that describes the MR
and that the MR that the lkey refers to is owned by that PD.
The second step is to dequeue all requests when MR is destroyed.
Since PD can't be destroyed while it owns MRs it is guaranteed that when a
worker wakes up the request it refers to is still valid.
Now, it is possible to refrain from taking a reference on the device since
it is assured to be present as pd.
While that, replace the dedicated ordered workqueue with the system
unbound workqueue to reuse an existing resource and improve
performance. This will also fix a bug of queueing to the wrong workqueue.
Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The IB_MR_REREG_PD command rewrites mr->pd after successful
rereg_user_mr(), such change causes to lost usecnt information and
produces the following warning:
WARNING: CPU: 1 PID: 1771 at drivers/infiniband/core/verbs.c:336 ib_dealloc_pd+0x4e/0x60 [ib_core]
CPU: 1 PID: 1771 Comm: rereg_mr Tainted: G W OE 5.0.0-rc7-for-upstream-perf-2019-02-20_14-03-40-34 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:ib_dealloc_pd+0x4e/0x60 [ib_core]
RSP: 0018:ffffc90003923dc0 EFLAGS: 00010286
RAX: 00000000ffffffff RBX: ffff88821f7f0400 RCX: ffff888236a40c00
RDX: ffff88821f7f0400 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88835f665d80 R09: ffff8882209c90d8
R10: ffff88835ec003e0 R11: 0000000000000000 R12: ffff888221680ba0
R13: ffff888221680b00 R14: 00000000ffffffea R15: ffff88821f53c318
FS: 00007f70db11e740(0000) GS:ffff88835f640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001dfd030 CR3: 000000029d9d8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
uverbs_free_pd+0x2d/0x30 [ib_uverbs]
destroy_hw_idr_uobject+0x16/0x40 [ib_uverbs]
uverbs_destroy_uobject+0x28/0x170 [ib_uverbs]
__uverbs_cleanup_ufile+0x6b/0x90 [ib_uverbs]
uverbs_destroy_ufile_hw+0x8b/0x110 [ib_uverbs]
ib_uverbs_close+0x1f/0x80 [ib_uverbs]
__fput+0xb1/0x220
task_work_run+0x7f/0xa0
exit_to_usermode_loop+0x6b/0xb2
do_syscall_64+0xc5/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f70dad00664
Fixes: e278173fd19e ("RDMA/core: Cosmetic change - move member initialization to correct block")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fix the following warning by adding a missing break:
drivers/infiniband/hw/hfi1/tid_rdma.c: In function ‘hfi1_tid_rdma_wqe_interlock’:
drivers/infiniband/hw/hfi1/tid_rdma.c:3251:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
switch (prev->wr.opcode) {
^~~~~~
drivers/infiniband/hw/hfi1/tid_rdma.c:3259:2: note: here
case IB_WR_RDMA_READ:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: c6c231175ccd ("IB/hfi1: Add interlock between TID RDMA WRITE and other requests")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kaike Wan <Kaike.wan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
To resolve conflicts with net-next and pick up the first patch.
* branch 'mlx5-next':
net/mlx5: Factor out HCA capabilities functions
IB/mlx5: Add support for 50Gbps per lane link modes
net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register
net/mlx5: Add new fields to Port Type and Speed register
net/mlx5: Refactor queries to speed fields in Port Type and Speed register
net/mlx5: E-Switch, Avoid magic numbers when initializing offloads mode
net/mlx5: Relocate vport macros to the vport header file
net/mlx5: E-Switch, Normalize the name of uplink vport number
net/mlx5: Provide an alternative VF upper bound for ECPF
net/mlx5: Add host params change event
net/mlx5: Add query host params command
net/mlx5: Update enable HCA dependency
net/mlx5: Introduce Mellanox SmartNIC and modify page management logic
IB/mlx5: Use unified register/load function for uplink and VF vports
net/mlx5: Use consistent vport num argument type
net/mlx5: Use void pointer as the type in address_of macro
net/mlx5: Align ODP capability function with netdev coding style
mlx5: use RCU lock in mlx5_eq_cq_get()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The current check does not take into account the previous value of
pinned_vm; thus it is quite bogus as is. Fix this by checking the
new value after the (optimistic) atomic inc.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Before calling the provider's alloc_mw function, verify that the
given memory type is either IB_MW_TYPE_1 or IB_MW_TYPE_2.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The strlen() check at the beginning of iw_cm_map() ensures that devname
and ifname strings are less than destinations to which they are supposed
to be copied. Change strncpy() call to be strcpy(), because we are
protected from overflow. Zero the entire string buffer to avoid copying
uninitialized kernel stack memory to userspace.
This fixes the compilation warning below:
In file included from ./include/linux/dma-mapping.h:6,
from drivers/infiniband/core/iwcm.c:38:
In function _strncpy_,
inlined from _iw_cm_map_ at drivers/infiniband/core/iwcm.c:519:2:
./include/linux/string.h:253:9: warning: ___builtin_strncpy_ specified
bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: d53ec8af56d5 ("RDMA/iwcm: Don't copy past the end of dev_name() string")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
old_pd is used only if IB_MR_REREG_PD flags is set.
For readability move it's initialization to where it is used.
While there rewrite the whole 'if-else' block so on error jump directly
to label and no need for 'else'
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fixes the following sparse warning:
drivers/infiniband/hw/cxgb4/cm.c:658:6: warning:
symbol 'read_tcb' was not declared. Should it be static?
Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The method of set hem for scc context is different from other contexts. It
should notify the hardware with the detailed idx in bt0 for scc, while for
other contexts, it only need to notify the bt step and the hardware will
calculate the idx.
Here fixes the following error when unloading the hip08 driver:
[ 123.570768] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[ 123.579023] {1}[Hardware Error]: event severity: recoverable
[ 123.584670] {1}[Hardware Error]: Error 0, type: recoverable
[ 123.590317] {1}[Hardware Error]: section_type: PCIe error
[ 123.595877] {1}[Hardware Error]: version: 4.0
[ 123.600395] {1}[Hardware Error]: command: 0x0006, status: 0x0010
[ 123.606562] {1}[Hardware Error]: device_id: 0000:7d:00.0
[ 123.612034] {1}[Hardware Error]: slot: 0
[ 123.616120] {1}[Hardware Error]: secondary_bus: 0x00
[ 123.621245] {1}[Hardware Error]: vendor_id: 0x19e5, device_id: 0xa222
[ 123.627847] {1}[Hardware Error]: class_code: 000002
[ 123.632977] hns3 0000:7d:00.0: aer_status: 0x00000000, aer_mask: 0x00000000
[ 123.639928] hns3 0000:7d:00.0: aer_layer=Transaction Layer, aer_agent=Receiver ID
[ 123.647400] hns3 0000:7d:00.0: aer_uncor_severity: 0x00000000
[ 123.653136] hns3 0000:7d:00.0: PCI error detected, state(=1)!!
[ 123.658959] hns3 0000:7d:00.0: ROCEE uncorrected RAS error identified
[ 123.665395] hns3 0000:7d:00.0: ROCEE RAS AXI rresp error
[ 123.670713] hns3 0000:7d:00.0: requesting reset due to PCI error
[ 123.676715] hns3 0000:7d:00.0: received reset event , reset type is 5
[ 123.683147] hns3 0000:7d:00.0: AER: Device recovery successful
[ 123.688978] hns3 0000:7d:00.0: PF Reset requested
[ 123.693684] hns3 0000:7d:00.0: PF failed(=-5) to send mailbox message to VF
[ 123.700633] hns3 0000:7d:00.0: inform reset to vf(1) failded -5!
Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Reviewed-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Accroding to hip08's limitation, qp&cq specification is 1M, mtpt
specification 1M in kernel space.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support for the RDMA_NLDEV_CMD_NEWLINK/DELLINK messages which allow
dynamically adding new RXE links. Deprecate the old module options for
now.
Cc: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support for new LINK messages to allow adding and deleting rdma
interfaces. This will be used initially for soft rdma drivers which
instantiate device instances dynamically by the admin specifying a netdev
device to use. The rdma_rxe module will be the first user of these
messages.
The design is modeled after RTNL_NEWLINK/DELLINK: rdma drivers register
with the rdma core if they provide link add/delete functions. Each driver
registers with a unique "type" string, that is used to dispatch messages
coming from user space. A new RDMA_NLDEV_ATTR is defined for the "type"
string. User mode will pass 3 attributes in a NEWLINK message:
RDMA_NLDEV_ATTR_DEV_NAME for the desired rdma device name to be created,
RDMA_NLDEV_ATTR_LINK_TYPE for the "type" of link being added, and
RDMA_NLDEV_ATTR_NDEV_NAME for the net_device interface to use for this
link. The DELLINK message will contain the RDMA_NLDEV_ATTR_DEV_INDEX of
the device to delete.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
There is a dead lock in usnic ib_register and netdev_notify path.
usnic_ib_discover_pf()
| mutex_lock(&usnic_ib_ibdev_list_lock);
| usnic_ib_device_add();
| ib_register_device()
| usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock);
| ib_get_eth_speed()
| rtnl_lock()
order of lock: &usnic_ib_ibdev_list_lock -> usdev_lock -> rtnl_lock
rtnl_lock()
| usnic_ib_netdevice_event()
| mutex_lock(&usnic_ib_ibdev_list_lock);
order of lock: rtnl_lock -> &usnic_ib_ibdev_list_lock
Solution is to use the core's lock-free ib_device_get_by_netdev() scheme
to lookup ib_dev while handling netdev & inet events.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Reviewed-by: Tanmay Inamdar <tinamdar@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Since rxe allows unregistration from other threads the rxe pointer can
become invalid any moment after ib_register_driver returns. This could
cause a user triggered use after free.
Add another driver callback to be called right after the device becomes
registered to complete any device setup required post-registration. This
callback has enough core locking to prevent the device from becoming
unregistered.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
rxe has an open coded version of this that is not as safe as the core
version. This lets us eliminate the internal device list entirely from
rxe.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
rxe does not have correct locking for its registration/unregistration
paths, use the core code to handle it instead. In this mode
ib_unregister_device will also do the dealloc, so rxe is required to do
clean up from a callback.
The core code ensures that unregistration is done only once, and generally
takes care of locking and concurrency problems for rxe.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
These APIs are intended to support drivers that exist outside the usual
driver core probe()/remove() callbacks. Normally the driver core will
prevent remove() from running concurrently with probe(), once this safety
is lost drivers need more support to get the locking and lifetimes right.
ib_unregister_driver() is intended to be used during module_exit of a
driver using these APIs. It unregisters all the associated ib_devices.
ib_unregister_device_and_put() is to be used by a driver-specific removal
function (ie removal by name, removal from a netdev notifier, removal from
netlink)
ib_unregister_queued() is to be used from netdev notifier chains where
RTNL is held.
The locking is tricky here since once things become async it is possible
to race unregister with registration. This is largely solved by relying on
the registration refcount, unregistration will only ever work on something
that has a positive registration refcount - and then an unregistration
mutex serializes all competing unregistrations of the same device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The core API handles the locking correctly and is faster if there are
multiple devices.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Several drivers need to find the ib_device from a given netdev. rxe needs
this at speed in an unsleepable context, so choose to implement the
translation using a RCU safe hash table.
The hash table can have a many to one mapping. This is intended to support
some future case where multiple IB drivers (ie iWarp and RoCE) connect to
the same netdevs. driver_ids will need to be different to support this.
In the process this makes the struct ib_device and ib_port_data RCU safe
by deferring their kfrees.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The associated netdev should not actually be very dynamic, so for most
drivers there is no reason for a callback like this. Provide an API to
inform the core code about the net dev affiliation and use a core
maintained data structure instead.
This allows the core code to be more aware of the ndev relationship which
will allow some new APIs based around this.
This also uses locking that makes some kind of sense, many drivers had a
confusing RCU lock, or missing locking which isn't right.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Like the other cases there no real reason to have another array just for
the cache. This larger conversion gets its own patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
There is no reason to have three allocations of per-port data. Combine
them together and make the lifetime for all the per-port data match the
struct ib_device.
Following patches will require more port-specific data, now there is a
good place to put it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Netlink dumpit handshake exchanges the index from which kernel should
start to return its value, in current code, this index included
not-visible in this PID items too and indirectly revealed the number of
entries.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds ability to query specific QP based on its LQPN (local
QPN), which is assigned by HW and needs special treatment while inserting
into restrack DB.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
PD, MR and QP objects have parents objects: contexts and PDs. The exposed
parent IDs allow to correlate various objects and simplify debug
investigation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
