summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2017-08-07Merge tag 'rdma-rc-2017-07-26' of ↵Doug Ledford
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma into leon-ipoib IPoIB fixes for 4.13 The patchset provides various fixes for IPoIB. It is combination of fixes to various issues discovered during verification along with static checkers cleanup patches. Most of the patches are from pre-git era and hence lack of Fixes lines. There is one exception in this IPoIB group - addition of patch revert: Revert "IB/core: Allow QP state transition from reset to error", but it followed by proper fix to the annoying print, so I thought it is appropriate to include it. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-04IB/hns: checking for IS_ERR() instead of NULLDan Carpenter
The hns_roce_v1_create_lp_qp() returns NULL on error, not error pointers. Fixes: bfcc681bd09d ("IB/hns: Fix the bug when free mr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-04RDMA/mlx5: Fix existence check for extended address vectorLeon Romanovsky
The extended address vector is the highest bit in be32 variable, but it was compared with the lowest. This patch fixes the endianness of that check and removes already declared define. Fixes: 17d2f88f92ce ("IB/mlx5: Add ODP atomics support") Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-04IB/uverbs: Fix device cleanupYishai Hadas
Uverbs device should be cleaned up only when there is no potential usage of. As part of ib_uverbs_remove_one which might be triggered upon reset flow the device reference count is decreased as expected and leave the final cleanup to the FDs that were opened. Current code increases reference count upon opening a new command FD and decreases it upon closing the file. The event FD is opened internally and rely on the command FD by taking on it a reference count. In case that the command FD was closed and just later the event FD we may ensure that the device resources as of srcu are still alive as they are still in use. Fixing the above by moving the reference count decreasing to the place where the command FD is really freed instead of doing that when it was just closed. fixes: 036b10635739 ("IB/uverbs: Enable device removal when there are active user space applications") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-04RDMA/uverbs: Prevent leak of reserved fieldLeon Romanovsky
initialize to zero the response structure to prevent the leakage of "resp.reserved" field. drivers/infiniband/core/uverbs_cmd.c:1178 ib_uverbs_resize_cq() warn: check that 'resp.reserved' doesn't leak information Fixes: 33b9b3ee9709 ("IB: Add userspace support for resizing CQs") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-04IB/core: Fix race condition in resolving IP to MACParav Pandit
Currently while resolving IP address to MAC address single delayed work is used for resolving multiple such resolve requests. This singled work is essentially performs two tasks. (a) any retry needed to resolve and (b) it executes the callback function for all completed requests While work is executing callbacks, any new work scheduled on for this workqueue is lost because workqueue has completed looking at all pending requests and now looking at callbacks, but work is still under execution. Any further retry to look at pending requests in process_req() after executing callbacks would lead to similar race condition (may be reduce the probably further but doesn't eliminate it). Retrying to enqueue work that from queue_req() context is not something rest of the kernel modules have followed. Therefore fix in this patch utilizes kernel facility to enqueue multiple work items to a workqueue. This ensures that no such requests gets lost in synchronization. Request list is still maintained so that rdma_cancel_addr() can unlink the request and get the completion with error sooner. Neighbour update event handling continues to be handled in same way as before. Additionally process_req() work entry cancels any pending work for a request that gets completed while processing those requests. Originally ib_addr was ST workqueue, but it became MT work queue with patch of [1]. This patch again makes it similar to ST so that neighbour update events handler work item doesn't race with other work items. In one such below trace, (though on 4.5 based kernel) it can be seen that process_req() never executed the callback, which is likely for an event that was schedule by queue_req() when previous callback was getting executed by workqueue. [<ffffffff816b0dde>] schedule+0x3e/0x90 [<ffffffff816b3c45>] schedule_timeout+0x1b5/0x210 [<ffffffff81618c37>] ? ip_route_output_flow+0x27/0x70 [<ffffffffa027f9c9>] ? addr_resolve+0x149/0x1b0 [ib_addr] [<ffffffff816b228f>] wait_for_completion+0x10f/0x170 [<ffffffff810b6140>] ? try_to_wake_up+0x210/0x210 [<ffffffffa027f220>] ? rdma_copy_addr+0xa0/0xa0 [ib_addr] [<ffffffffa0280120>] rdma_addr_find_l2_eth_by_grh+0x1d0/0x278 [ib_addr] [<ffffffff81321297>] ? sub_alloc+0x77/0x1c0 [<ffffffffa02943b7>] ib_init_ah_from_wc+0x3a7/0x5a0 [ib_core] [<ffffffffa0457aba>] cm_req_handler+0xea/0x580 [ib_cm] [<ffffffff81015982>] ? __switch_to+0x212/0x5e0 [<ffffffffa04582fd>] cm_work_handler+0x6d/0x150 [ib_cm] [<ffffffff810a14c1>] process_one_work+0x151/0x4b0 [<ffffffff810a1940>] worker_thread+0x120/0x480 [<ffffffff816b074b>] ? __schedule+0x30b/0x890 [<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0 [<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0 [<ffffffff810a6b1e>] kthread+0xce/0xf0 [<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff816b53a2>] ret_from_fork+0x42/0x70 [<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70 INFO: task kworker/u144:1:156520 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u144:1 D ffff883ffe1d7600 0 156520 2 0x00000080 Workqueue: ib_addr process_req [ib_addr] ffff883f446fbbd8 0000000000000046 ffff881f95280000 ffff881ff24de200 ffff883f66120000 ffff883f446f8008 ffff881f95280000 ffff883f6f9208c4 ffff883f6f9208c8 00000000ffffffff ffff883f446fbbf8 ffffffff816b0dde [1] http://lkml.iu.edu/hypermail/linux/kernel/1608.1/05834.html Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-23IB/ipoib: Notify on modify QP failure only when relevantErez Shitrit
Modify QP can fail and it can be acceptable, like when moving from RST to ERR state, all the rest are not acceptable and a message to the log should be printed. The current code prints on all failures and many messages like: "Failed to modify QP to ERROR state" appear, even when supported by the state machine of the QP object. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23Revert "IB/core: Allow QP state transition from reset to error"Leon Romanovsky
The commit ebc9ca43e1d5 ("IB/core: Allow QP state transition from reset to error") allowed transition from Reset to Error state for the QPs. This behavior doesn't follow the IBTA specification 1.3, which in 10.3.1 QUEUE PAIR AND EE CONTEXT STATES section. The quote from the spec: "An error can be forced from any state, except Reset, with the Modify QP/EE Verb." Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Remove double pointer assigningLeon Romanovsky
There is no need to assign "p" pointer twice. This patch fixes the following smatch warning: drivers/infiniband/ulp/ipoib/ipoib_cm.c:517 ipoib_cm_rx_handler() warn: missing break? reassigning 'p->id' Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Clean error paths in add portLeon Romanovsky
Refactor error paths in ipoib_add_port() function. The code flow ensures that the function terminates on every error flow and it makes redundant all "else" cases. The functions are called during the flow are returning "result < 0", in case of error, so there is no need to check it explicitly. Fixes: 58e9cc90cda7 ("IB/IPoIB: Fix bad error flow in ipoib_add_port()") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Add get statistics support to SRIOV VFFeras Daoud
Add SRIOV VF support to get traffic statistics. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Add multicast packets statisticsAlex Vesker
Update the multicast counter when multicast packets are received and provide this information through ethtool support. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initializationFeras Daoud
Set IPOIB_NEIGH_TBL_FLUSH bit after initializing the neighbor flushed completion, otherwise the garbage collector may signal a completion while it is not initialized yet. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qpAlex Vesker
Don't allow negative values to max_nonsrq_conn_qp. There is no functional impact on a negative value but it is logicically incorrect. Fixes: 68e995a29572 ("IPoIB/cm: Add connected mode support for devices without SRQs") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Make sure no in-flight joins while leaving that mcastErez Shitrit
While cleaning neighs and there is a send-only mcast neigh, the driver should wait to finish its join process before trying to remove it. Without this patch, we will see messages like: "ipoib_mcast_leave on an in-flight join" and unexpected results in the join_complete. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Use cancel_delayed_work_sync when neededErez Shitrit
The work mcast_task can re-queue itself, so instead of doing cancel && flush_workqueue, that still can leave a queued task on the air, use cancel_delayed_work_sync. Also, no need to use lock over the cancel, the original lock was due to bit assignment setting (IPOIB_MCAST_RUN) that is not in use anymore. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Fix race between light events and interface restartFeras Daoud
A potential race between light_event and interface restart may attach multicast group to an already attached QP. Scenario: light_event flow goes through ipoib_mcast_dev_flush function, if a context switch occurs before calling ipoib_mcast_remove_list, then we may face a situation where the broadcast of the priv is null and the corresponding QP is not detached yet. If an "interface restart" runs during the previous context switch, the following scenario occurs: When the device goes up, ipoib_ib_dev_up function will be called, it will send a new registration request to the broadcast group and then attach the group to the QP that was not detached before. IPOIB_FLUSH_LIGHT INTERFACE RESTART __ipoib_ib_dev_flush | | | | | | | ipoib_mcast_dev_flush | Move mcast list and broadcast to remove_list | | | | | Context Switch--> | | ipoib_ib_dev_down | | | | | ipoib_ib_dev_up | | | | | ipoib_mcast_join_task | allocate new broadcast | | | | | Attach QP to multicast group | | | | | <--Context Switch ipoib_mcast_leave Detach QP from multicast group Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-20RDMA/core: Initialize port_num in qp_attrIsmail, Mustafa
Initialize the port_num for iWARP in rdma_init_qp_attr. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Cc: <stable@vger.kernel.org> # v2.6.14+ Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/uverbs: Fix the check for port numberIsmail, Mustafa
The port number is only valid if IB_QP_PORT is set in the mask. So only check port number if it is valid to prevent modify_qp from failing due to an invalid port number. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Cc: <stable@vger.kernel.org> # v2.6.14+ Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/iser: don't send an rkey if all data is written as immadiate-dataSagi Grimberg
We might get some bogus error completions in case the target will remotely invalidate the rkey and the HCA will need to retransmit from this buffer. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20rxe: fix broken receive queue drainingVijay Immanuel
If we modified the qp to ERROR state, and drained the recieve queue, post_recv must trigger the responder task to complete the drain work request. Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>-- Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/qedr: Prevent memory overrun in verbs' user responsesAmrani, Ram
Wrap ib_copy_to_udata with a function that ensures that the data being copied over to user space isn't longer than the allowed. Fixes: cecbcddf6461 ("qedr: Add support for QP verbs") Fixes: a7efd7773e31 ("qedr: Add support for PD,PKEY and CQ verbs") Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20iw_cxgb4: don't use WR keys/addrs for 0 byte readsGanesh Goudar
Only use the read sge lkey/addr and the remote rkey/addr if the length of the read is not zero. Otherwise the read response might be treated as the RTR read response and not delivered to the application. Or worse Terminator hardware will fail a 0B read if the STAG is 0 even if the read length is 0. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/mlx4: Fix CM REQ retries in paravirt modeHåkon Bugge
CM REQs cannot be successfully retried, because a new pv_cm_id is created for each request, without checking if one already exists. By checking if an id exists before creating one, the bug is fixed. This bug can be provoked by running an RDMA CM user-land application, but inserting a five seconds delay before the rdma_accept() call on the passive side. This delay is larger than the default CMA timeout, and triggers a retry from the active side. The retried REQ will use another pv_cm_id (the cm_id on the wire). This confuses the CM protocol and two REJs are sent from the passive side. Here is an excerpt from ibdump running without the patch: 3.285092 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.382711 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.382861 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject 7.387644 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject and here is the same with bug fix applied: 3.251010 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.349387 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 8.258443 LID: 4 -> LID: 4 SDP 290 CM: ConnectReply(SDP Hello) 8.259890 LID: 4 -> LID: 4 InfiniBand 290 CM: ReadyToUse Suggested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reported-by: Wei Lin Guay <wei.lin.guay@oracle.com> Tested-by: Wei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/rdmavt: Setting of QP timeout can overflow jiffies computationKaike Wan
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause overflow due to the fact that the input to the function usecs_to_jiffies is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is equal to or greater than 30. The consequence is unnecessarily excessive retry and thus degradation of the system performance. This patch fixes the problem by limiting the input to 5-bit and calling usecs_to_jiffies() before multiplying the scaling factor. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/core: Fix sparse warningsMatan Barak
Delete unused variables to prevent sparse warnings. Fixes: db1b5ddd5336 ("IB/core: Rename uverbs event file structure") Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema") Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix the value reported for local ack delaySelvin Xavier
Local ack delay exposed by the driver is 0 which means infinite QP timeout. Reporting the default value to 16 (approx 260ms) Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cqSelvin Xavier
While invoking the req_notify_cq hook, ULPs can request whether the CQs have any CQEs pending. If CQEs are pending, drivers can indicate it by returning 1 for req_notify_cq. The stack will poll CQ again till CQ is empty. This patch peeks the CQ for any valid entries and return accordingly. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix return value of poll routineDevesh Sharma
Fix the incorrect reporting of number of polled entries by taking into account the max CQ depth in the driver. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Enable atomics only if host bios supportsDevesh Sharma
Driver shall check if the host system bios has enabled Atomic operations capability in PCI Device Control 2 register of the pci-device. Expose the ATOMIC_HCA flag only if the Atomic operations capability is set. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Specify RDMA component when allocating stats contextSomnath Kotur
Starting FW version 20.6.47, firmware is keeping separate statistics for L2 and RDMA. However, driver needs to specify RDMA or not when allocating stat_ctx. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QPEddie Wai
There's a couple of bugs in the support of max_rd_atomic and max_dest_rd_atomic. In the modify_qp, if the requested max_rd_atomic, which is the ORRQ size, is greater than what the chip can support, then we have to cap the request to chip max as we can't have the HW overflow the ORRQ. Capping the max_rd_atomic support internally is okay to do as the remaining read/atomic WRs will still be sitting in the SQ. However, for the max_dest_rd_atomic, the driver has to error out as this dictates the IRRQ size and we can't control what the remote side sends. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Report supported value to IB stack in query_deviceSelvin Xavier
- Report supported value for max_mr_size to IB stack in query_device. Also, check and log if MR size requested by application in reg_user_mr() is greater than value currently supported by driver. - Report only 4K page size support for now - Fix Max_QP value returned by ibv_devinfo -vv. In case of PF, FW reserves 129 QPs for creating QP1s of VFs and PF. So the max_qp value reported by FW for PF doesn'tt include the QP1. Fixing this issue by adding 1 with the value reported by FW. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID failsSelvin Xavier
This fix is added only to avoid system crash in some a specific scenario. When bnxt_re driver is loaded and if user tries to change interface mac address, delete GID fails because QP1 is still associated with existing MAC (default GID). If the above command fails GID tables are not modified in the h/w or driver, but the GID context memory is freed. Now, if the user changes the mac back to the original value, another add_gid comes to the driver where the driver reports that the GID is already present in its table and tries to access the context which was already freed. So, in this case, in order to avoid NULL pointer de-reference, this patch removes the context memory free if delete_gid fails and the same context memory is re-used in new add_gid. Memory cleanup will be taken care during driver unload, while deleting the GID table. Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing errorSomnath Kotur
Posting WQE size of 2 results in a WQE_FORMAT_ERROR thrown by the HW as it requires host to supply WQE Size with room for atleast one SGE so that the resulting WQE size be atleast 3. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontextDevesh Sharma
The driver must free the DPI during the dealloc_ucontext instead of freeing it during dealloc_pd. However, the DPI allocation scheme remains unchanged. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/mlx5: Fix a warning messageDan Carpenter
"umem" is a valid pointer. We intended to print "*umem" or even just "err" instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/ocrdma: Fix error codes in ocrdma_create_srq()Dan Carpenter
If either of these allocations fail then we return ERR_PTR(0). That's equivalent to NULL and results in a NULL pointer dereference in the caller. Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/ocrdma: Fix an error code in ocrdma_alloc_pd()Dan Carpenter
We should preserve the original "status" error code instead of resetting it to zero. Returning ERR_PTR(0) is the same as NULL and results in a NULL dereference in the callers. I added a printk() on error instead. Fixes: 45e86b33ec8b ("RDMA/ocrdma: Cache recv DB until QP moved to RTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/cxgb3: Fix error codes in iwch_alloc_mr()Dan Carpenter
We accidentally don't set the error code on some error paths. It means return ERR_PTR(0) which is NULL and results in a NULL dereference in the caller. Fixes: 13a239330abd ("RDMA/cxgb3: Don't ignore insert_handle() failures") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20cxgb4: Fix error codes in c4iw_create_cq()Dan Carpenter
If one of these kmalloc() calls fails then we return ERR_PTR(0) which is NULL. It results in a NULL dereference in the callers. Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/i40iw: Fix error code in i40iw_create_cq()Dan Carpenter
We accidentally forgot to set the error code if ib_copy_from_udata() fails. It means we return ERR_PTR(0) which is NULL and results in a NULL dereference in the callers. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/IPoIB: Fix error code in ipoib_add_port()Dan Carpenter
We accidentally don't see the error code on some of these error paths. It means we return ERR_PTR(0) which is NULL and it results in a NULL dereference in the caller. This bug dates to pre-git days. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: checking for NULL instead of IS_ERR()Dan Carpenter
bnxt_re_alloc_mw() doesn't return NULL, it returns error pointers. Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Free QP PBLEs when the QP is destroyedTatyana Nikolova
If the physical buffer list entries (PBLEs) of a QP are freed up at i40iw_dereg_mr, they can be assigned to a newly created QP before the previous QP is destroyed. Fix this by freeing PBLEs only when the QP is destroyed. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Avoid memory leak of CQP request objectsShiraz Saleem
Control Queue Pair (CQP) request objects, which have not received a completion upon interface close, remain in memory. To fix this, identify and free all pending CQP request objects during destroy CQP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Update list correctlyHenry Orosco
To avoid infinite loop, in i40iw_ieq_handle_exception, update plist inside while loop. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Add missing memory barrierHenry Orosco
Add missing write memory barrier before writing the header containing valid bit to the WQE in i40iw_puda_send. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Free QP resources on CQP destroy QP failureShiraz Saleem
Current flow leaves software QP structures in memory if Control Queue Pair (CQP) destroy QP OP fails. To fix this, free QP resources on fail of CQP destroy QP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Release cm_id ref on PCI function resetShiraz Saleem
On PCI function reset, cm_id reference is not released which causes an application hang, as it waits on the cm_id to be released on rdma_destroy. To fix this, call i40iw_cm_disconn during a PCI function reset to clean-up resources and release cm_id reference. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2024-07-07 17:05:04 +0000