summaryrefslogtreecommitdiff
path: root/drivers/input/mouse/elantech.c
AgeCommit message (Collapse)Author
2019-02-07Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela
Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-21Input: elantech - disable elan-i2c for P52 and P72Benjamin Tissoires
The current implementation of elan_i2c is known to not support those 2 laptops. A proper fix is to tweak both elantech and elan_i2c to transmit the correct information from PS/2, which would make a bad candidate for stable. So to give us some time for fixing the root of the problem, disable elan_i2c for the devices we know are not behaving properly. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600 Link: https://bugs.archlinux.org/task/59714 Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: elantech - enable middle button of touchpad on ThinkPad P72Aaron Ma
Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-16Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.19 merge window.
2018-08-08Input: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: elantech - fix V4 report decoding for module with middle key???
Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: elantech - enable middle button of touchpads on ThinkPad P52Aaron Ma
PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: psmouse-smbus - allow to control psmouse_deactivateBenjamin Tissoires
This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - detect new ICs and setup Host Notify for themBenjamin Tissoires
New ICs are using a different scheme for the alternate bus parameter. Given that they are new and are only using either PS2 only or PS2 + SMBus Host Notify, we force those new ICs to use the SMBus solution for enhanced reporting. This allows the touchpad found on the Lenovo T480s to report 5 fingers every 8 ms, instead of having a limit of 2 every 8 ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - add support for SMBus devicesBenjamin Tissoires
Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - query the resolution in query_infoBenjamin Tissoires
The command ETP_RESOLUTION_QUERY also contains the bus information. It is better to fetch it once, while we are querying for device information. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23Input: elantech - split device info into a separate structureBenjamin Tissoires
In preparation for SMBus device support, move static device information that we query form the touchpad upon initialization into separate structure. This will allow us to query the device without allocating memory first. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: psmouse - move sliced command implementation to libps2Dmitry Torokhov
In preparation to adding some debugging statements to PS/2 control sequences let's move psmouse_sliced_command() into libps2 and rename it to ps2_sliced_command(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: psmouse - create helper for reporting standard buttons/motionDmitry Torokhov
Many protocol driver re-implement code to parse buttons or motion data from the standard PS/2 protocol. Let's split the parsing into separate functions and reuse them in protocol drivers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-26Input: elantech - add new icbody type 15Aaron Ma
The touchpad of Lenovo Thinkpad L480 reports it's version as 15. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: elantech - make arrays debounce_packet static, reduces object code sizeColin Ian King
Don't populate the arrays debounce_packet on the stack, instead make them static. Makes the object code smaller by over 870 bytes: Before: text data bss dec hex filename 30553 9152 0 39705 9b19 drivers/input/mouse/elantech.o After: text data bss dec hex filename 29521 9312 0 38833 97b1 drivers/input/mouse/elantech.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-24Merge branch 'bind_unbind' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next This brings in devm_device_add_group() and friends so that we can create driver-specific device attributes as managed resources.
2017-07-12Input: elantech - constify attribute_group structuresArvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 16815 1424 0 18239 473f drivers/input/mouse/elantech.o File size After adding 'const': text data bss dec hex filename 16879 1360 0 18239 473f drivers/input/mouse/elantech.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-07Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabledUlrik De Bie
The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Reviewed-by: Arjan Opmeer <arjan@opmeer.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-29Merge tag 'v4.12-rc3' into nextDmitry Torokhov
Sync with mainline to bring in changes in platform drovers dropping calls to sparse_keymap_free() so that we can remove it for good.
2017-05-11Input: elantech - force relative mode on a certain moduleKT Liao
One of Elan modules with sample version is 0x74 and hw_version is 0x03 has a bug in absolute mode implementation, so let it run in default PS/2 relative mode. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18Input: elantech - add Fujitsu Lifebook E547 to force crc_enabledThorsten Leemhuis
Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Cc: stable@vger.kernel.org Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: mouse - use local variables consistentlyGuenter Roeck
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-07Input: elantech - add Fujitsu Lifebook E556 to force crc_enabledDmitry Torokhov
Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Also let's reorder elantech_dmi_force_crc_enabled list so LIfebook enries are in alphabetical order. Reported-by: William Linna <william.linna@gmail.com> Tested-by: William Linna <william.linna@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-03Input: elantech - force needed quirks on Fujitsu H760Matti Kurkela
Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with the same quirks. Without this patch, the touchpad is useless out-of-the-box as the mouse pointer won't move. This patch makes the driver aware of both the crc_enabled=1 requirement and the middle button, making the touchpad fully functional out-of-the-box. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-03Input: elantech - fix Lenovo version typoMarcos Paulo de Souza
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: elantech - fix debug dump of the current packetBenjamin Tissoires
The use of mixed psmouse_printk() and printk creates 2 lines in the log, while the use of %*ph solves everything. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Merge branch 'for-linus' into nextDmitry Torokhov
Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
2016-06-23Input: elantech - add more IC body types to the listDmitry Torokhov
The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-18Input: psmouse - use same format for secondary devices as for primaryPali Rohár
This patch changes name of secondary psmouse devices to mach format of primary device. Format of primary device is "protocol vendor name" and is set by function psmouse_switch_protocol() in file psmouse-base.c. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires
When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-06Input: elantech - add Fujitsu Lifebook U745 to force crc_enabledTakashi Iwai
Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-07Input: elantech - add special check for fw_version 0x470f01 touchpadDuson Lin
It is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: elantech - force resolution of 31 u/mmPeter Hutterer
All Elantech touchpads pre-v4 with dynamic resolution queries have a fixed resolution of 800dpi -> 31.49 units/mm. Set this statically, so userspace does not have to guess. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-04Input: elantech - add new icbody type洪一竹
This adds new icbody type to the list recognized by Elantech PS/2 driver. Cc: stable@vger.kernel.org Signed-off-by: Sam Hung <sam.hung@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-02Input: elantech - fix detection of touchpads where the revision matches a ↵Hans de Goede
known rate Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Cc: stable@vger.kernel.org Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13Input: elantech - fix semi-mt protocol for v3 HWBenjamin Tissoires
When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06Input: elantech - fix absolute mode setting on some ASUS laptopsUlrik De Bie
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Cc: stable@vger.kernel.org Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-01Input: elantech - add more Fujtisu notebooks to force crc_enabledRainer Koenig
Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-08Input: elantech - support new ICs types for version 4Sam hung
This change allows the driver to recognize newer Elantech touchpads. Cc: stable@vger.kernel.org Signed-off-by: Yi ju Hong <sam.hung@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-25Input: elantech - trust firmware about trackpoint presenceDmitry Torokhov
Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen <marcus.overhagen@gmail.com> Reported-and-tested-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - provide a sysfs knob for crc_enabledUlrik De Bie
The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - report the middle button of the touchpadUlrik De Bie
In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - fix crc_enabled for Fujitsu H730Ulrik De Bie
The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - use elantech_report_trackpoint for hardware v4 tooUlrik De Bie
The Fujitsu H730 has hardware v4 with a trackpoint. This enables the elantech_report_trackpoint for v4. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add missing POINTER / DIRECT properties to a bunch of driversHans de Goede
I've not done a full audit of all mouse drivers, I noticed these ones were missing the POINTER property while working on the POINTING_STICK property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add INPUT_PROP_POINTING_STICK propertyHans de Goede
It is useful for userspace to know that there not dealing with a regular mouse but rather with a pointing stick (e.g. a trackpoint) so that userspace can e.g. automatically enable middle button scrollwheel emulation. It is impossible to tell the difference from the evdev info without resorting to putting a list of device / driver names in userspace, this is undesirable. Add a property which allows userspace to see if a device is a pointing stick, and set it on all the pointing stick drivers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: elantech - fix detection of touchpad on ASUS s301lHans de Goede
Adjust Elantech signature validation to account fo rnewer models of touchpads. Cc: stable@vger.kernel.org Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - add support for trackpoint found on some v3 modelsUlrik De Bie
Some elantech v3 touchpad equipped laptops also have a trackpoint, before this commit, these give sync errors. With this patch, the trackpoint is provided as another input device: 'Elantech PS/2 TrackPoint' The patch will also output messages that do not follow the expected pattern. In the mean time I've seen 2 unknown packets occasionally: 0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00 I don't know what those are for, but they can be safely ignored. Currently all packets that are not known to v3 touchpad and where packet[3] (the fourth byte) lowest nibble is 6 are now recognized as PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint. This has been verified to work on a laptop Lenovo L530 where the touchpad/trackpoint combined identify themselves as: psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02) psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - reset the device when elantech probe failsUlrik De Bie
elantech_init() calls elantech_set_absolute_mode which sets the driver in an absolute mode. When after this the elantech_init fails, it is best to turn the ps/2 mouse emulation mode back on by calling psmouse_reset() so that it can work as a regular mouse. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2024-07-03 21:08:19 +0000