summaryrefslogtreecommitdiff
path: root/drivers/input/rmi4
AgeCommit message (Collapse)Author
2018-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - the main change is a fix for my brain-dead patch to PS/2 button reporting for some protocols that made it in 4.17 - there is a new driver for Spreadtum vibrator that I intended to send during merge window but ended up not sending the 2nd pull request. Given that this is a brand new driver we should not see regressions here - a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad P52 - addition of few more ACPI IDs for Silead and Elan drivers - RMI4 is switched to using IRQ domain code instead of rolling its own implementation * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - fix button reporting for basic protocols Input: xpad - fix GPD Win 2 controller name Input: elan_i2c_smbus - fix more potential stack buffer overflows Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID Input: elantech - fix V4 report decoding for module with middle key Input: elantech - enable middle button of touchpads on ThinkPad P52 Input: do not assign new tracking ID when changing tool type Input: make input_report_slot_state() return boolean Input: synaptics-rmi4 - fix axis-swap behavior Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts() Input: synaptics-rmi4 - convert irq distribution to irq_domain Input: silead - add MSSL0002 ACPI HID Input: goldfish_events - fix checkpatch warnings Input: add Spreadtrum vibrator driver
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Input: synaptics-rmi4 - fix axis-swap behaviorLucas Stach
The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()Wei Yongjun
The error return code PTR_ERR(data->irqdomain) is always 0 since data->irqdomain is equal to NULL in this error handling case. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-05Input: synaptics-rmi4 - convert irq distribution to irq_domainNick Dyer
Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer <nick@shmanahar.org> Acked-by: Christopher Heiny <cheiny@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-06Input: synaptics-rmi4 - fix an unchecked out of memory error pathChristophe JAILLET
When extending the rmi_spi buffers, we must check that no out of memory error occurs, otherwise we may access data above the currently allocated memory. Propagate the error code returned by 'rmi_spi_manage_pools()' instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-01Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.16 merge window.
2018-01-24Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes ↵Nick Dyer
in F01" Since the sysfs attribute hangs off the RMI bus, which doesn't go away during firmware flash, it needs to be explicitly removed, otherwise we would try and register the same attribute twice. This reverts commit 36a44af5c176d619552d99697433261141dd1296. Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22Input: synaptics-rmi4 - log when we create a guest serio portDmitry Torokhov
To ease analyzing boot behavior from logs, let's log when we are about to register the pass-through serio port. Also, let's drop "Synaptics" prefix from the port name, as RMI4 is good enough indicator already, and having the prefix means that the name does not fit into serio->name field. While at it move from hard-coded seio->phys to one mentioning the sensor ID (such as "rmi4-00.fn03/serio0"). Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22Input: synaptics-rmi4 - unmask F03 interrupts when port is openedDmitry Torokhov
Currently we register the pass-through serio port when we probe the F03 RMI function, and then, in sensor configure phase, we unmask interrupts. Unfortunately this is too late, as other drivers are free probe devices attached to the serio port as soon as it is probed. Because interrupts are masked, the IO times out, which may result in not being able to detect trackpoints on the pass-through port. To fix the issue we implement open() and close() methods for the pass-through serio port and unmask interrupts from there. We also move creation of the pass-through port form probe to configure stage, as RMI driver does not enable transport interrupt until all functions are probed (we should change this, but this is a separate topic). We also try to clear the pending data before unmasking interrupts, because some devices like to spam the system with multiple 0xaa 0x00 announcements, which may interfere with us trying to query ID of the device. Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03") Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22Input: synaptics-rmi4 - do not delete interrupt memory too earlyDmitry Torokhov
We want to free memory reserved for interrupt mask handling only after we free functions, as function drivers might want to mask interrupts. This is needed for the followup patch to the F03 that would implement unmasking and masking interrupts from the serio pass-through port open() and close() methods. Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-18Input: synaptics-rmi4 - prevent UAF reported by KASANNick Desaulniers
KASAN found a UAF due to dangling pointer. As the report below says, rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in rmi_irq_fn. [ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162 [ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2 [ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017 [ 311.424078] Call Trace: [ 311.424086] dump_stack+0xae/0x12d [ 311.424090] ? _atomic_dec_and_lock+0x103/0x103 [ 311.424094] ? show_regs_print_info+0xa/0xa [ 311.424099] ? input_handle_event+0x10b/0x810 [ 311.424104] print_address_description+0x65/0x229 [ 311.424108] kasan_report.cold.5+0xa7/0x281 [ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424123] ? memcpy+0x1f/0x50 [ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core] [ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core] [ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core] [ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424177] ? free_irq+0xa0/0xa0 [ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180 [ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424193] ? irq_thread_fn+0x3d/0x80 [ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180 [ 311.424200] ? irq_thread+0x21d/0x290 [ 311.424203] ? irq_thread_check_affinity+0x170/0x170 [ 311.424207] ? remove_wait_queue+0x150/0x150 [ 311.424212] ? kasan_unpoison_shadow+0x30/0x40 [ 311.424214] ? __init_waitqueue_head+0xa0/0xd0 [ 311.424218] ? task_non_contending.cold.55+0x18/0x18 [ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0 [ 311.424226] ? irq_thread_check_affinity+0x170/0x170 [ 311.424230] ? kthread+0x19e/0x1c0 [ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 311.424237] ? ret_from_fork+0x32/0x40 [ 311.424244] Allocated by task 899: [ 311.424249] kasan_kmalloc+0xbf/0xe0 [ 311.424252] __kmalloc_track_caller+0xd9/0x1f0 [ 311.424255] kmemdup+0x17/0x40 [ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core] [ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi] [ 311.424278] hid_input_report+0x1a8/0x2c0 [hid] [ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid] [ 311.424286] irq_thread_fn+0x3d/0x80 [ 311.424288] irq_thread+0x21d/0x290 [ 311.424291] kthread+0x19e/0x1c0 [ 311.424293] ret_from_fork+0x32/0x40 [ 311.424296] Freed by task 1162: [ 311.424300] kasan_slab_free+0x71/0xc0 [ 311.424303] kfree+0x90/0x190 [ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core] [ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core] [ 311.424322] irq_thread_fn+0x3d/0x80 [ 311.424324] irq_thread+0x21d/0x290 [ 311.424327] kthread+0x19e/0x1c0 [ 311.424330] ret_from_fork+0x32/0x40 [ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64 [ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100) [ 311.424344] The buggy address belongs to the page: [ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0 [ 311.424353] flags: 0x17ffffc0000100(slab) [ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a [ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000 [ 311.424366] page dumped because: kasan: bad access detected [ 311.424369] Memory state around the buggy address: [ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb [ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb [ 311.424384] ^ [ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb Cc: stable@vger.kernel.org Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16Input: synaptics_rmi4 - remove unneeded MODULE_VERSION() usageGreg Kroah-Hartman
MODULE_VERSION is useless for in-kernel drivers, so just remove all usage of it in the rmi4 drivers. Now that this is gone, the RMI_DRIVER_VERSION macro was also removed as it was pointless. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-05Input: synaptic_rmi4 - remove duplicate include in F34Pravin Shedge
This duplicate include has been found with scripts/checkincludes.pl but it has been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Patchwork-Id: 10092051 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-13Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.15 merge window.
2017-11-07Merge tag 'v4.14-rc8' into nextDmitry Torokhov
Merge with mainline to bring in SPDX markings to avoid annoying merge problems when some header files get deleted.
2017-11-07Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3Yiannis Marangos
Some Synaptics devices, such as LEN0073, use SMBUS version 3. Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com> Acked-by: Benjamin Tissoires <benjamion.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27Input: synaptics-rmi4 - limit the range of what GPIOs are buttonsAndrew Duggan
By convention the first 6 bits of F30 Ctrl 2 and 3 are used to signify GPIOs which are connected to buttons. Additional GPIOs may be used as input GPIOs to signal the touch controller of some event (ie disable touchpad). These additional GPIOs may meet the criteria of a button in rmi_f30_is_valid_button() but should not be considered buttons. This patch limits the GPIOs which are mapped to buttons to just the first 6. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Daniel Martin <consume.noise@gmail.com> Tested-by: Daniel Martin <consume.noise@gmail.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09Input: synaptics-rmi4 - make array rmi_f54_report_type_names staticColin Ian King
The array rmi_f54_report_type_names is local to the source and does not need to be in global scope, so make it static. Also make the array const char * const. Cleans up sparse warning: symbol 'rmi_f54_report_type_names' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-24Merge branch 'bind_unbind' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next This brings in devm_device_add_group() and friends so that we can create driver-specific device attributes as managed resources.
2017-07-22Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01Dmitry Torokhov
Now that we have proper managed API to create device attributes, let's start using it instead of the manual unwinding. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12Input: synaptics-rmi4 - constify attribute_group structures in F01Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 4777 480 0 5257 1489 drivers/input/rmi4/rmi_f01.o File size After adding 'const': text data bss dec hex filename 4817 416 0 5233 1471 drivers/input/rmi4/rmi_f01.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-12Input: synaptics-rmi4 - constify attribute_group structures in F34Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 5287 448 0 5735 1667 drivers/input/rmi4/rmi_f34.o File size After adding 'const': text data bss dec hex filename 5339 384 0 5723 165b drivers/input/rmi4/rmi_f34.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-23Input: synaptics-rmi4 - only read the F54 query registers which are usedAndrew Duggan
The F54 driver is currently only using the first 6 bytes of F54 so there is no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and similar) have an issue with the touchpad or I2C bus when reading reports larger then 16 bytes. Reads larger then 16 bytes are reported in two HID reports. Something about the back to back reports seems to cause the next read to report incorrect data. This results in F30 failing to load and the click button failing to work. Previous issues with the I2C controller or touchpad were addressed in: commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-09Input: synaptics-rmi4 - register F03 port as pass-through serioDmitry Torokhov
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS driver to detect whether it is dealing with touchpad + trackpoint combination or just a trackpoint, so we end up with a "phantom" dualpoint ALPS device in addition to real touchpad and trackpoint. Given that we do not have any special advanced handling for ALPS or Elantech trackpoints (unlike IBM trackpoints that have separate driver and a host of options) we are better off keeping the trackpoints in PS/2 emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU, which will limit number of protocols psmouse driver will try. In addition to getting rid of the "phantom" touchpads, this will also speed up probing of F03 pass-through port. Reported-by: Damjan Georgievski <gdamjan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-01Input: synaptics-rmi4 - use %phN to form F34 configuration IDDmitry Torokhov
Instead of printing bytes one by one, let's use %phN to print the buffer in one go. Also use hweight8 to count number of partitions instead of inspecting it bit by bit. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-29Input: synaptics-rmi4 - change a char type to u8Dan Carpenter
Smatch doesn't like when we use "%02X" to print char types because, what about if it's a negative? Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - enable IRQ operation in F34 V7Nick Dyer
The polled firmware update proved unreliable when testing on S7817. Use attention to signal commands are complete. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - change F12 clip to inactive border debugNick Dyer
The data in F12_2D_Ctrl8 corresponds to the inactive border width used by the RMI device. It is not in pixel units and should not be treated as a clip value. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - use dev_driver_string when registering interruptNick Dyer
When IRQ handling was moved to rmi_driver in 3aeed5b the naming of the interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch restores the previous behaviour and makes the interrupt easier to identify in /proc/interrupts. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - when registering sensors do not call them "drivers"Dmitry Torokhov
We are not registering drivers, but transport devices (AKA sensors), so let's call them that. Also let's rename "retval" to "error" in probe() functions as the variables are used to store error codes. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - cleanup SMbus mapping handlingDmitry Torokhov
There is no reason to copy structures field-by-filed when we can copy elements at once. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - fix endianness issue in SMBus transportDmitry Torokhov
The mapping table holds address in LE form, so we should convert it to CPU when comparing it. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - fix handling failures from rmi_enable_sensorDmitry Torokhov
If rmi_enable_sensor() fails in rmi_driver_probe(), we should not return immediately, but disable IRQs and tear down function list. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Fixes to various USB drivers to validate existence of endpoints before trying to use them, fixes to APLS v8 protocol, and a couple of i8042 quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - fix trackstick button handling on V8 devices Input: ALPS - fix V8+ protocol handling (73 03 28) Input: sur40 - validate number of endpoints before using them Input: kbtab - validate number of endpoints before using them Input: hanwang - validate number of endpoints before using them Input: yealink - validate number of endpoints before using them Input: ims-pcu - validate number of endpoints before using them Input: cm109 - validate number of endpoints before using them Input: iforce - validate number of endpoints before using them Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list Input: synaptics-rmi4 - prevent null pointer dereference in f30 Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
2017-03-10Input: synaptics-rmi4 - prevent null pointer dereference in f30Benjamin Tissoires
If the platform data has f30_data.disable set, f30 in rmi_f30_config() might be null. Prevent a kernel oops by checking for non-null f30. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-01Input: rmi4 - f30: detect INPUT_PROP_BUTTONPAD from the button countBenjamin Tissoires
INPUT_PROP_BUTTONPAD is currently only set through the platform data. The RMI4 header doc says that this property is there to force the buttonpad property, so we also need to detect it by looking at the exported buttons count. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-20Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.11 merge window.
2017-02-09Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guestBenjamin Tissoires
On the latest series of ThinkPads, the button events for the TrackPoint are reported through the touchpad itself as opposed to the TrackPoint device. In order to report these buttons properly, we need to forward them to the TrackPoint device and notify psmouse to send the button presses/releases. Signed-off-by: Lyude Paul <thatslyude@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09Input: synaptics-rmi4 - clean up F30 implementationDmitry Torokhov
This patch does several cleanup changes to F30 code - switch to using BIT() macro - use DIV_ROUND_UP() where appropriate - factor out code setting up and reporting buttons - use single loop when reporting buttons: arithmetic is cheap compared to conditionals and associated branch misprediction. Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-07Input: synaptics-rmi4 - select 'SERIO' when neededArnd Bergmann
With CONFIG_SERIO=m, we get a build error for the rmi4-f03 driver, added in linux-4.10: warning: (HID_RMI) selects RMI4_F03 which has unmet direct dependencies (!UML && INPUT && RMI4_CORE && (SERIO=y || RMI4_CORE=SERIO)) drivers/input/built-in.o: In function `rmi_f03_attention': rmi_f03.c:(.text+0xcfe0): undefined reference to `serio_interrupt' rmi_f03.c:(.text+0xd055): undefined reference to `serio_interrupt' drivers/input/built-in.o: In function `rmi_f03_remove': rmi_f03.c:(.text+0xd115): undefined reference to `serio_unregister_port' drivers/input/built-in.o: In function `rmi_f03_probe': rmi_f03.c:(.text+0xd209): undefined reference to `__serio_register_port' An earlier patch tried to fix this, but missed the HID_RMI driver that does a 'select' on the F03 backend. This adds a hidden Kconfig symbol that enforces 'serio' to be enabled when RMI4-F03 is, which covers all cases. Fixes: d7ddad0acc4a ("Input: synaptics-rmi4 - fix F03 build error when serio is module") Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-07Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()Wei Yongjun
Fix to return error code -ENOMEM from the devm_kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 6bd0dcfacf28 ("Input: synaptics-rmi4 - factor out functions from probe") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-06Merge branch 'synaptics-rmi4' into nextDmitry Torokhov
Bring in latest RMI4 support in preparation to the merge window.
2017-02-06Input: synaptics-rmi4 - add rmi_find_function()Benjamin Tissoires
If a function needs to communicate with an other, it's better to have a way to retrieve this other. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31Input: synaptics-rmi4 - add sysfs interfaces for hardware IDsNick Dyer
These attributes provide various bits of information which may be enumerated under the RMI4 protocol to user space. This may be useful for displaying the particular version which is in use, or selecting the correct firmware to flash. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31Input: synaptics-rmi4 - add sysfs attribute update_fw_statusNick Dyer
The attribute returns the percentage complete. If the firmware update fails, it reports a negative error code. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wakeChristophe JAILLET
These tests are reversed. A warning should be displayed if an error is returned, not on success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-24Input: constify device_type structuresBhumika Goyal
Declare device_type structures as const as they are only stored in the type field of a device structure. This field is of type const, so add const to declaration of device_type structures. File size before: text data bss dec hex filename 17184 1344 80 18608 48b0 drivers/input/input.o File size after: text data bss dec hex filename 17248 1280 80 18608 48b0 drivers/input/input.o File size before: text data bss dec hex filename 2355 384 8 2747 abb drivers/input/rmi4/rmi_bus.o File size after: text data bss dec hex filename 2483 264 8 2755 ac3 drivers/input/rmi4/rmi_bus.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>