summaryrefslogtreecommitdiff
path: root/drivers/input/tablet/wacom_sys.c
AgeCommit message (Collapse)Author
2013-09-20Input: wacom - testing result shows get_report is unnecessary.Ping Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-20Input: wacom - support EMR and MFT sensors of Cintiq Companion HybridJason Gerecke
Adds support for the sensors integrated in to the Cintiq Companion Hybrid. These sensors use by-and-large the same protocol as the Cintiq 24HD touch. NOTE: The ExpressKeys on the Cintiq Companion Hybrid are wired to both the EMR controller and CPU GPIO pins. It may be necessary to disable their functionality in this driver if building a custom Android kernel for this device (lest two events be sent to userspace for every button press). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-24Input: wacom - fix error return code in wacom_probe()Wei Yongjun
Fix to return a negative error code from the urb submit error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-12Input: wacom - integrate resolution calculationPing Cheng
Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-23Input: wacom - fix wacom_set_report retry logicChris Bagwell
Logic sets a value and then reads it back to make sure it worked and retries write on failures. Since read and write share a buffer, it needs to be set back up before writing though. Issue is not seen a lot because 1) it doesn't need to retry for a lot of tablets and 2) a lot of failures that need a retry are from an -ETIMEDOUT and hopefully buffer is not touched in this case. At least one user has shown logs with buffer being modified during -ETIMEDOUT case with linux 3.7 kernel. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: wacom - add support for 2 new multi-touch tablets (0x100 and 0x101)Ping Cheng
This adds support for the two new multi-touch tablets. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: wacom - clean up device type codePing Cheng
Use switch instead of if statement to verify device types Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Input: wacom - correct bad Cintiq 24HD checkJason Gerecke
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25Input: wacom - add touch sensor support for Cintiq 24HD touchJason Gerecke
Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25Input: wacom - handle split-sensor devices with internal hubsJason Gerecke
Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04Input: wacom - clean up wacom_query_tablet_dataJason Gerecke
Rewrites this function to be easier to read and understand. The new function 'wacom_set_device_mode' now handles the grunt work of assembling the proper feature report, sending it to the device, and ensuring the setting "sticks". Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-04Input: wacom - introduce wacom_fix_phy_from_hidJason Gerecke
The Cintiq 24HD touch cannot use wacom_set_phy_from_res to determine the physical size of the touch sensor since the pen and touch are on separate USB devices. The physical size is, however, provided in the HID descriptor, just scaled to a unit we don't use. This patch introduces the function wacom_fix_phy_from_hid to let us make use of the unit and exponent data provided by HID to set the [xy]_phy variables to an appropriate value. This function relies on a trimmed-down version of hidinput_calc_abs_res from the hid-input.c. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-07Merge branch 'for-linus' to bring in change ensuring that drivers thatDmitry Torokhov
use threaded IRQs use IRQF_ONESHOT.
2012-07-04Merge commit 'v3.5-rc5' into nextDmitry Torokhov
2012-06-28Input: wacom - don't retrieve touch_max when it is predefinedPing Cheng
Some models, such as 0xE6, report more fingers than we process. Reported-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Nils Kanning <nils@kanning.de> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-28Input: wacom - fix retrieving touch_max bugPing Cheng
rep_data is not an array anymore, so taking it's address when passing to wacom_get_report() is wrong. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-28Input: wacom - BTN_TOOL_DOUBLETAP is not a valid device_typePing Cheng
It is replaced by BTN_TOOL_FINGER. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-12Input: wacom - remove code duplicationJason Gerecke
Replaces code to calculate Intuos5 physical dimensions with a call to an existing function that performs the same task. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - initialize and destroy LEDs for Intuos4 S tabletsJason Gerecke
This case appears to have been missed in the original commit. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - battery reporting improvementsChris Bagwell
Do not register battery device until connected to a tablet. This prevents an empty battery icon from being shown when tablet is connected using USB cable. Also, call power_supply_powers() for apps that can make use of that info. And stop ignoring input registration failures. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - rearrange type enumPing Cheng
So we can simplify a few type related if statements Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ...
2012-05-04USB: input: wacom_sys.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Input: wacom - use dev_xxx() instead of naked printk()s and dbg()sDmitry Torokhov
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - return proper error if usb_get_extra_descriptor() failsDmitry Torokhov
Instead of returning 1 (which is not even negative) let's capture and return error codde returned by usb_get_extra_descriptor(). Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - fix sparse warningDmitry Torokhov
This fixes the following warning from sparse warning: Using plain integer as NULL pointer Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-01USB: wacom: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: wacom_sys.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29Input: wacom - add 0xE5 (MT device) supportPing Cheng
Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29Input: wacom - retrieve maximum number of touch pointsPing Cheng
From the HID usage table when it is supported. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-25USB: wacom_sys.c: remove err() usageGreg Kroah-Hartman
err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> CC: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-21Merge commit 'v3.4-rc4' into nextDmitry Torokhov
2012-04-04Input: wacom - add Intuos5 multitouch sensor supportJason Gerecke
Intuos5 tablets with PTH-* model numbers include a multitouch sensor which use the same touch reports as the 3rd-generation Bamboo. No useful information is in the HID descriptor for the touch interface so hardcoded values are used during setup. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 Touch Ring LED supportJason Gerecke
The Touch Ring LEDs on Intuos5 tablets use a different report format which supports only 4 levels of brightness. We remap the 7-bit value obtained from sysfs to an appropriate value for the tablet. Control of the crop mark LEDs (new to the I5) is left for a later patch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-29Input: wacom - check for allocation failure in probe()Dan Carpenter
We accidentally removed the check for NULL in 3aac0ef10b "Input: wacom - isolate input registration". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - wireless battery statusChris Bagwell
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - create inputs when wireless connectChris Bagwell
When a tablet connect or disconnect is detected, schedule work queue to register or unregister related input devices. When a wireless tablet connects, it reports same USB PID used if tablet is connected with USB cable. Use this to update features values, set input capabilities, and then register device. From there, the Pen and Touch interfaces will reuse the existing tablet's IRQ routines. Its possible that 1 receiver is shared with 2 tablets with different PID (small and medium Bamboo for example) so the input is unregister at disconnect to better support this case. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - wireless monitor frameworkChris Bagwell
The 3rd gen Bamboo Pen & Touch and Intuos5 tablets support an optional wireless module. When its receiver is plugged into USB, it presents 3 interfaces: 0) Monitor 1) Pen and 2) Touch. The exact capabilities of the Pen and Touch interfaces can not be determined until a tablet connection is established and reported over the Monitor interface. This patch detects this wireless receiver and enables interrupt packets to be processed for the Monitor interface. Processing the data in packets will be left to another patch. Since it doesn't make sense to create an input device for the Monitor interface, it is not created. Creation of Pen and Touch input device is also delayed until monitor packets can be processed. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - isolate input registrationChris Bagwell
Although this better co-locates input registration logic, the main goal is to make it easier to optionally create input devices or delay creation to later time periods. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-09Merge commit 'v3.3-rc6' into nextDmitry Torokhov
2012-01-31Input: wacom - use BTN_TOOL_FINGER to indicate touch device typePing Cheng
Tested-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tc3589x-keypad - add missing kerneldoc Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages Input: ucb1400_ts - convert to threaded IRQ Input: ucb1400_ts - drop inline annotations Input: usb1400_ts - add __devinit/__devexit section annotations Input: ucb1400_ts - set driver owner Input: ucb1400_ts - convert to use dev_pm_ops Input: psmouse - make sure we do not use stale methods Input: evdev - do not block waiting for an event if fd is nonblock Input: evdev - if no events and non-block, return EAGAIN not 0 Input: evdev - only allow reading events if a full packet is present Input: add driver for pixcir i2c touchscreens Input: samsung-keypad - implement runtime power management support Input: tegra-kbc - report wakeup key for some platforms Input: tegra-kbc - add device tree bindings Input: add driver for AUO In-Cell touchscreens using pixcir ICs Input: mpu3050 - configure the sampling method Input: mpu3050 - ensure we enable interrupts Input: mpu3050 - add of_match table for device-tree probing Input: sentelic - document the latest hardware ... Fix up fairly trivial conflicts (device tree matching conflicting with some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
2011-12-12Input: wacom - add LED support for Cintiq 24HDJason Gerecke
The Cintiq 24HD has three LEDs on the left side of the tablet and three LEDs on the right side of the tablet. Switching to LED 0, 1, or 2 will enable the top, middle, or bottom LED for the respective side. Switching to LED 3 turns off the LEDs on the respective side. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Merge commit 'v3.2-rc3' into nextDmitry Torokhov
2011-11-18USB: convert drivers/input/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/input/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Henk Vergonet <Henk.Vergonet@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: "Magnus Hörlin" <magnus@alefors.se> Cc: Chris Moeller <kode54@gmail.c> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Edwin van Vliet <edwin@cheatah.nl> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Alexander Strakh <strakh@ispras.ru> Cc: Glenn Sommer <gsommer@datanordisk.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-26Input: wacom - read 3rd gen Bamboo Touch HID dataChris Bagwell
Override invalid pen based pktlen and x/y_max with touch values from HID report. Since active area of pen and touch are same on these devices, set physical x/y size while pen x/y_max and resolution are still valid. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - add some comments to wacom_parse_hidChris Bagwell
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - remove unused bamboo HID parsingChris Bagwell
Bamboo's do not declared a Digitizer-Stylus so the if() was never executed. wacom_features already contains correct stylus packet length. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - cleanup feature report for bamboosChris Bagwell
Only the stylus interface on Bamboo's has a feature report that can be used to set to wacom mode. The touch interface only has 1 report mode and will return errors for those get/sets requests. The get request was always erroring out because it was not marked as an input request. Only down side of error was needlessly resending the set request 5 times. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Merge branch 'next' into for-linusDmitry Torokhov
generated by cgit (git 2.34.1) at 2025-03-26 07:53:53 +0000