summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2022-01-08Input: zinitix - add compatible for bt532Nikita Travkin
Zinitix BT532 is another touch controller that seem to implement the same interface as an already supported BT541. Add it to the driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-5-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08Input: zinitix - handle proper supply namesLinus Walleij
The supply names of the Zinitix touchscreen were a bit confused, the new bindings rectifies this. To deal with old and new devicetrees, first check if we have "vddo" and in case that exists assume the old supply names. Else go and look for the new ones. We cannot just get the regulators since we would get an OK and a dummy regulator: we need to check explicitly for the old supply name. Use struct device *dev as a local variable instead of the I2C client since the device is what we are actually obtaining the resources from. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [Slightly changed the legacy regulator detection] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-4-nikita@trvn.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08Input: axp20x-pek - revert "always register interrupt handlers" changeHans de Goede
The power button on Cherry Trail systems with an AXP288 PMIC is connected to both the power button pin of the PMIC as well as to a power button GPIO on the Cherry Trail SoC itself. This leads to double power button event reporting which is a problem. Since reporting power button presses through the PMIC is not supported on all PMICs used on Cherry Trail systems, we want to keep the GPIO power button events, so the axp20x-pek code checks for the presence of a GPIO power button and in that case does not register its input-device. On most systems the GPIO power button also can wake-up the system from suspend, so the axp20x-pek driver would also not register its interrupt handler. But on some systems there was a bug causing wakeup by the GPIO power button handler to not work. Commit 9747070c11d6 ("Input: axp20x-pek - always register interrupt handlers") was added as a work around for this registering the axp20x-pek interrupts, but not the input-device on Cherry Trail systems. In the mean time the root-cause of the GPIO power button wakeup events not working has been found and fixed by the "pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins" patch, so this is no longer necessary. This reverts the workaround going back to only registering the interrupt handlers on systems where we also register the input-device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20220106111647.66520-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-03Input: gpio-keys - avoid clearing twice some memoryChristophe JAILLET
bitmap_parselist() already clears the 'bits' bitmap, so there is no need to clear it when it is allocated. This just wastes some cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/d6ee621b9dd75b92f8831db365cee58dc2025322.1640813136.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-20Input: byd - fix typo in a commentXiang wangx
The double `the' in a comment is repeated, thus it should be removed. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20211216082735.11948-1-wangxiang@cdjrlc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-19Input: ucb1400_ts - remove redundant variable penupColin Ian King
Variable penup is assigned a value but penup is never read later, it is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211205000525.153999-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-19Input: ti_am335x_tsc - lower the X and Y sampling timeDario Binacchi
The open delay time has to be applied only on the first sample of the X/Y coordinates because on the following samples the ADC channel is not changed. Removing this time from the samples after the first one, "ti,coordinate-readouts" greater than 1, decreases the total acquisition time, allowing to increase the number of acquired coordinates in the time unit. Signed-off-by: Dario Binacchi <dariobin@libero.it> Link: https://lore.kernel.org/r/20211212125358.14416-4-dariobin@libero.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-19Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2Dario Binacchi
The Z2 step configuration doesn't erase the SEL_INP_SWC_3_0 bit-field before setting the ADC channel. This way its value could be corrupted by the ADC channel selected for the Z1 coordinate. Fixes: 8c896308feae ("input: ti_am335x_adc: use only FIFO0 and clean up a little") Signed-off-by: Dario Binacchi <dariobin@libero.it> Link: https://lore.kernel.org/r/20211212125358.14416-3-dariobin@libero.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-19Input: ti_am335x_tsc - set ADCREFM for X configurationDario Binacchi
As reported by the STEPCONFIG[1-16] registered field descriptions of the TI reference manual, for the ADC "in single ended, SEL_INM_SWC_3_0 must be 1xxx". Unlike the Y and Z coordinates, this bit has not been set for the step configuration registers used to sample the X coordinate. Fixes: 1b8be32e6914 ("Input: add support for TI Touchscreen controller") Signed-off-by: Dario Binacchi <dariobin@libero.it> Link: https://lore.kernel.org/r/20211212125358.14416-2-dariobin@libero.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12Input: silead - add pen supportHans de Goede
Some Silead touchscreens have support for an active (battery powered) pen, add support for this. So far pen-support has only been seen on X86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new properties are deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12Input: silead - add support for EFI-embedded fw using different min/max ↵Hans de Goede
coordinates Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12Input: goodix - 2 small fixes for pen supportHans de Goede
2 small fixes for pen support 1. Set the id.vendor field for the pen input_dev 2. Fix a typo in a comment Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211212124242.81019-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12Input: goodix - improve gpiod_get() error loggingHans de Goede
goodix_get_gpio_config() errors are fatal (abort probe()) so log them at KERN_ERR level rather then as debug messages. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211212124242.81019-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-09Input: goodix - add pen supportHans de Goede
Some Goodix touchscreens have support for a (Goodix) active pen, add support for this. The info on how to detect when a pen is down and to detect when the stylus buttons are pressed was lifted from the out of tree Goodix driver with pen support written by Adya: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/ Since there is no way to tell if pen support is present, the registering of the pen input_dev is delayed till the first pen event is detected. This has been tested on a Trekstor Surftab duo W1, a Chuwi Hi13 and a Cyberbook T116 tablet. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202161 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204513 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211207100754.31155-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-08Merge tag 'v5.15' into nextDmitry Torokhov
Sync up with the mainline to get the latest APIs and DT bindings.
2021-12-06Input: ff-core - correct magnitude setting for rumble compatibilityCharles Keepax
When converting a rumble into a periodic effect, for compatibility, the magnitude is effectively calculated using: magnitude = max(strong_rubble / 3 + weak_rubble / 6, 0x7fff); The rumble magnitudes are both u16 and the resulting magnitude is s16. The max is presumably an attempt to limit the result of the calculation to the maximum possible magnitude for the s16 result, and thus should be a min. However in the case of strong = weak = 0xffff, the result of the first part of the calculation is 0x7fff, meaning that the min would be redundant anyway, so simply remove the current max. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211130135039.13726-1-ckeepax@opensource.cirrus.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-06Input: palmas-pwrbutton - make a couple of arrays static constColin Ian King
Don't populate a couple of arrays on the stack but instead make them static const. Also makes the object code smaller by a few hundred bytes. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211129231749.619469-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-29Input: wacom_i2c - clean up the query device fieldsAlistair Francis
Improve the query device fields to be more verbose. Signed-off-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20211118123545.102872-1-alistair@alistair23.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-29Input: palmas-pwrbutton - use bitfield helpersGeert Uytterhoeven
Use the FIELD_PREP() helper, instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f8831b88346b36fc6e01e0910d0db6c94287d2b4.1637593297.git.geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: iforce - fix control-message timeoutJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: wacom_i2c - use macros for the bit masksAlistair Francis
To make the code easier to read use macros for the bit masks. Signed-off-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - reduce sample period to 15msMarek Vasut
Modern devices may redraw display at 60 Hz, make sure we have one input sample per one frame. Reduce sample period to 15ms, so we would get up to 66.6 samples per second, although realistically with all the jitter and extra scheduling wiggle room, we would end up just above 60 samples per second. This should be a good compromise between sampling too often and sampling too seldom. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108114145.84118-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - improve polled sample spacingMarek Vasut
Currently the ili210x driver implements a threaded interrupt handler which starts upon edge on the interrupt line, and then polls the touch controller for samples. Every time a sample is obtained from the controller, the thread function checks whether further polling is required, and if so, waits fixed amount of time before polling for next sample. The delay between consecutive samples can thus vary greatly, because the I2C transfer required to retrieve the sample from the controller takes different amount of time on different platforms. Furthermore, different models of the touch controllers supported by this driver require different delays during retrieval of samples too. Instead of waiting fixed amount of time before polling for next sample, determine how much time passed since the beginning of sampling cycle and then wait only the remaining amount of time within the sampling cycle. This makes the driver deliver samples with equal spacing between them. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005216.480525-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - special case ili251x sample read outMarek Vasut
The ili251x touch controller needs 5ms delay between sending I2C device address and register address, and, writing or reading register data. According to downstream ili251x example code, this 5ms delay is not required when reading touch samples out of the controller. Implement such a special case. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005259.480545-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang
Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-05Input: synaptics-rmi4 - Fix device hierarchyLoic Poulain
The created rmi device is orphan, which breaks the real device hierarchy, and can cause some trouble, especially during suspend and resume sequences. E.g. in case of I2C, rmi dev should be child of the I2C client device. Fix this, assigning the transport device as parent of the rmi device. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1635514971-18415-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-05Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai
Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-02Input: cap11xx - add support for cap1206Jesse Taube
According to the datasheet "The CAP1206 is pin- and register-compatible with the CAP1106, with the exception of the GAIN[1:0] bits and ALT_POL bit"(57). So, this patch aims to disable them as they are no longer used. Signed-off-by: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling
2021-10-16Input: ili210x - add ili251x firmware update supportMarek Vasut
The ili251x firmware can be updated, this is used when switching between different modes of operation of the touch surface, e.g. glove operation. This patch implements the firmware update mechanism triggered by a write into an sysfs attribute. The firmware itself is distributed as an intel hex file with non-standard types. The first two lines are of type 0xad, which indicates the start of DataFlash payload, that is always at address 0xf000 on the ili251x, so it can be dropped, and 0xac which indicates the position of firmware info in the Application payload, that is always at address 0x2020 on the ili251x and we do not care. The rest of the firmware is data of type 0x00, and we care about that. To convert the firmware hex file into something usable by the kernel, remove the first two lines and then use ihex2fw: $ tail -n +3 input.hex > temp.hex $ ./tools/firmware/ihex2fw temp.hex firmware/ilitek/ili251x.bin To trigger the firmware update, place firmware file ilitek/ili251x.bin into /lib/firmware/, write into firmware_update sysfs attribute and wait about 30-40 seconds. The firmware update is slow. Afterward, verify the firmware_version and mode sysfs attributes to check whether the firmware got updated and the controller switched back to application (AP) mode by reading out 'mode' attribute in sysfs. Note that the content of firmware_version, e.g. 0600.0005.abcd.aa04 can be matched to the content of the firmware hex file. The first four bytes, 0x06 0x00 0x00 0x05 can be found at ^:102030 00 05000006, the next four bytes 0xab 0xcd 0xaa 0x04 at ^:10F000 00 nnnnnnnn ABCDAA04. Note that the protocol differs considerably between the ili2xxx devices, this patch therefore implements this functionality only for ili251x that I can test. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-3-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ili210x - export ili251x version details via sysfsMarek Vasut
The ili251x firmware protocol permits readout of firmware version, protocol version, mcu version and current mode (application, boot loader, forced update). These information are useful when updating the firmware on the il251x, e.g. to avoid updating the same firmware into the device multiple times. The locking is now necessary to avoid races between interrupt handler and the sysfs readouts. Note that the protocol differs considerably between the ili2xxx devices, this patch therefore implements this functionality only for ili251x that I can test. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-2-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ili210x - use resolution from ili251x firmwareMarek Vasut
The ili251x firmware protocol permits readout of panel resolution, implement this, but make it possible to override this value using DT bindings. This way, older DTs which contain touchscreen-size-x and touchscreen-size-y properties will behave just like before and new DTs may avoid specifying these for ILI251x. Note that the command format is different on other controllers, so this functionality is isolated to ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: pm8941-pwrkey - respect reboot_mode for warm resetShawn Guo
On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot device into bootloader and recovery mode. Instead of always doing hard reset, add a check on reboot_mode for possible warm reset. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210714095850.27185-3-shawn.guo@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: max77693-haptic - drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210916170514.137977-1-krzysztof.kozlowski@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: cpcap-pwrbutton - do not set input parent explicitlyDmitry Torokhov
We are using devm_input_allocate_device() that already sets parent of the input device, there is no need to do that again. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/YWpiZqrfC9+GQsM4@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: snvs_pwrkey - add clk handlingUwe Kleine-König
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: max8925_onkey - don't mark comment as kernel-docRandy Dunlap
Change the comment to a normal (non-kernel-doc) comment to avoid these kernel-doc warnings: max8925_onkey.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * MAX8925 ONKEY driver max8925_onkey.c:2: warning: missing initial short description on line: * MAX8925 ONKEY driver Fixes: 3734574cac100 ("Input: enable onkey driver of max8925") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211002045943.9406-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - do not attempt IRQ workaround when deferring probeDmitry Torokhov
When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - set input device bus type and product IDDmitry Torokhov
Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: tm2-touchkey - allow changing keycodes from userspaceStephan Gerhold
At the moment the touch keys have key codes assigned from the device tree. In some cases, users might want to change the key code from userspace. There is existing functionality for this in the input core using the EVIOCSKEYCODE ioctl, which is integrated for example into udev. Make it possible to use this functionality for tm2-touchkey by simply making the input core aware of the array that holds the keycodes. Similar code also exists in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: tm2-touchkey - report scan codesStephan Gerhold
Report the index of pressed touch key as MSC_SCAN code to userspace so it is possible to identify which of the keys was pressed (not just the function that is currently assigned to the key). This is done similarly also in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: adxl34x - fix sparse warningDmitry Torokhov
This fixes the following warning from sparse: CC [M] drivers/input/misc/adxl34x.o CHECK drivers/input/misc/adxl34x.c drivers/input/misc/adxl34x.c:245:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:248:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:251:29: warning: cast to restricted __le16 Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/YWZIjb91d6aAwgss@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - switch to using managed resourcesDmitry Torokhov
By using managed resources (devm) we are able to streamline error handling in probe and remove most of the custom remove method. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/YWZGKWgdarGtvtYA@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - use dev_pm_set_wake_irq()Dmitry Torokhov
Instead of manually toggling interrupt as wakeup source in suspend/resume methods, let's declare keypad interrupt and wakeup interrupt and leave the rest to the PM core. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - use BIT() and GENMASK() macrosDmitry Torokhov
Also drop parenthesis around macros that do not use expressions as they are not needed. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - annotate suspend/resume as __maybe_unusedDmitry Torokhov
Instead of guarding suspend/resume methods with #ifdef CONFIG_PM let's mark them as __maybe_unused as this allows better compile coverage. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-04-29 15:33:57 +0000