summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2019-02-06Input: ili210x - drop platform data supportMarek Vasut
There is not a single user of the ili210x platform data in the kernel, just drop it. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: bma150 - register input device after setting private dataJonathan Bakker
Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: add new vibrator driver for various MSM SOCsBrian Masney
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: gpio-keys - add shutdown callbackFlorian Fainelli
On some platforms (e.g.: ARCH_BRCMSTB) it is possible to enter "poweroff" while leaving some wake-up sources enabled such as key presses in order to allow for the system to wake-up. Wire up a .shutdown() callback which calls into the existing gpio_keys_suspend() since the logic is essentially the same. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-04Input: sx8654 - do not override interrupt triggerDmitry Torokhov
We should rely on the interrupt trigger (level vs edge) set up by the firmware or board code instead of forcing what we consider appropriate. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-04Input: sx8654 - convert #defined flags to BIT(x)Richard Leitner
Some of the #defined register values are one-bit flags. Convert them to use the BIT(x) macro instead of 1 byte hexadecimal values. This improves readability and clarifies the intent. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-01Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and ↵Lee Jones
'ib-mfd-platform-5.1' into ibs-for-mfd-merged
2019-01-31Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Mostly driver fixes, but there's a core framework fix in here too: - Revert the commits that introduce clk management for the SP clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and there isn't any need to manage this clk, it just causes more headaches. - A performance regression that went unnoticed for many years where we would traverse the entire clk tree looking for a clk by name when we already have the pointer to said clk that we're looking for - A parent linkage fix for the qcom SDM845 clk driver - An i.MX clk driver rate miscalculation fix where order of operations were messed up - One error handling fix from the static checkers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Use active only source for CPUSS clocks clk: ti: Fix error handling in ti_clk_parse_divider_data() clk: imx: Fix fractional clock set rate computation clk: Remove global clk traversal on fetch parent index Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock" Revert "clk: mmp2: add SP clock" Revert "Input: olpc_apsp - enable the SP clock"
2019-01-28Input: sx8654 - use common of_touchscreen functionsRichard Leitner
of_touchscreen.c provides a common interface for a axis inversion and swapping of touchscreens. Therefore use it in the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: sx8654 - add sx8650 supportRichard Leitner
The sx8654 and sx8650 are quite similar, therefore add support for the sx8650 within the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> [dtor: use __be16 in sx8650_irq, add missing del_timer_sync] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: sx8654 - add sx8655 and sx8656 to compatiblesRichard Leitner
As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: sx8654 - add reset-gpio supportRichard Leitner
The sx8654 features a NRST input which may be connected to a GPIO. Therefore add support for hard-resetting the sx8654 via this NRST. If the reset-gpio property is provided the sx8654 is resetted via NRST instead of the soft-reset via I2C. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: st1232 - add Martin as module authorMartin Kepplinger
This adds myself as an author of the st1232 driver module as Tony's email address doesn't seem to work anymore. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: st1232 - add support for st1633Martin Kepplinger
Add support for the Sitronix ST1633 touchscreen controller to the st1232 driver. A protocol spec can be found here: www.ampdisplay.com/documents/pdf/AM-320480B6TZQW-TC0H.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: pwm-vibra - stop regulator after disabling pwm, not beforePaweł Chmiel
This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: pwm-vibra - prevent unbalanced regulatorJonathan Bakker
pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: snvs_pwrkey - allow selecting driver for i.MX 7DStefan Agner
The i.MX SNVS Power Key driver supports the i.MX 7D SoC family too. Allow to enable the i.MX SNVS Power Key driver even if only i.MX 7D SoC is selected. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64
2019-01-24Revert "Input: olpc_apsp - enable the SP clock"Lubomir Rintel
Turns out this is not such a great idea. Once the SP clock is disabled, it's not sufficient to just enable in order to bring the SP core back up. It seems that the kernel has no business managing this clock. Just let the firmware keep it enabled. This reverts commit ed22cee91a88c47e564478b012fdbcb079653499. Link: https://lore.kernel.org/lkml/154783267051.169631.3197836544646625747@swboyd.mtv.corp.google.com/ Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-16Input: olpc_apsp - assign priv->dev earlierLubomir Rintel
The dev field needs to be set when serio_register_port() is called, because the open callback may use it (in the error handling path). Fixes: commit af518342effd ("Input: olpc_apsp - check FIFO status on open(), not probe()") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-16input: stpmic1: Add STPMIC1 onkey driverPascal PAILLET-LME
The STPMIC1 pmic is able to manage an onkey button. This driver exposes the STPMIC1 onkey as an input device. It can also be configured to shut-down the power supplies on a long key-press with an adjustable duration. Signed-off-by: Pascal Paillet <p.paillet@st.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-16Input: stmpe-ts: preparations for STMPE ADC driverPhilippe Schenker
This patch removes common ADC settings in favor to use stmpe811_adc_common_init that is present in MFD. This is necessary in preparation for the stmpe-adc driver, because those two drivers have common settings for the ADC. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-16mfd: stmpe: Move ADC related defines to MFD headerPhilippe Schenker
Move defines that are ADC related to the header of the overlying MFD, so they can be used from multiple sub-devices. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-14Input: uinput - fix undefined behavior in uinput_validate_absinfo()Dmitry Torokhov
An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by: Kyungtae Kim <kt0755@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-14Merge tag 'v4.20' into for-linusDmitry Torokhov
Sync with mainline to get linux/overflow.h among other things.
2019-01-14Input: raspberrypi-ts - fix link errorAnders Roxell
Fix link error when TOUCHSCREEN_RASPBERRYPI_FW is enabled as a module and the dependent module is built-in. The 'depends on RASPBERRYPI_FIRMWARE' by itself prevents the touchscreen driver from being built-in when the firmware is configured as a module. However, the '|| COMPILE_TEST' still allows it unless we explicitly prevent that configuration with '|| (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)'. ld: drivers/input/touchscreen/raspberrypi-ts.o: in function `rpi_ts_probe': raspberrypi-ts.c:(.text+0x3a8): undefined reference to `rpi_firmware_get' ld: raspberrypi-ts.c:(.text+0x3a8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get' ld: raspberrypi-ts.c:(.text+0x4c8): undefined reference to `rpi_firmware_property' ld: raspberrypi-ts.c:(.text+0x4c8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property' Rework so that TOUCHSCREEN_RASPBERRYPI_FW depends on RASPBERRYPI_FIRMWARE=n if COMPILE_TEST is enabled. Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: xpad - add support for SteelSeries Stratus DuoTom Panfil
Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: edt-ft5x06 - add offset support for ev-ft5726Marco Felsch
Unfortunately the evervision focaltech implementation uses two offset registers, one for the x coordinate and one for y. This patch extends the driver to handle those offset registers only for devices that support these. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: edt-ft5x06 - add support to update ev-ft5726 registersMarco Felsch
Currently only the threshold and gain parameters can be read. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: edt-ft5x06 - add support for Evervision FT5726Marco Felsch
Evervision displays are using different Focaltech touchscreen controllers. This commit adds the initial support for the ones using the FT5726 controller. Receiving the touch data is the same as for the GENERIC_FT but the x and y cooridnates are swapped. The main differences are the register addresses where the GAIN and THRESHOLD parameters are stored. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: mtk-pmic-keys - remove duplicated include from mtk-pmic-keys.cYueHaibing
iSOrt includes in alphabetical order and remove duplicated include file linux/kernel.h Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: mcs_touchkey - use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: tca6416-keypad - use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Merge tag 'v4.20' into nextDmitry Torokhov
Merge with mainline to bring in the new APIs.
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-07Input: ad7879 - add check for read errors in interruptAditya Pakki
regmap_bulk_read() can return a non zero value on failure. The fix checks if the function call succeeded before calling mod_timer. The issue was identified by a static analysis tool. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - add support for aries touchkey variantJonathan Bakker
The touchkey variant found on aries board is slighty different, it uses a fixed regulator and writes/read to the same place Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - allow specifying custom keycodesJonathan Bakker
Not all devices use the same keycodes in the same order, so add possibility to define keycodes for buttons present on actual hardware. If keycodes property is not present, we assume that device has at least MENU and BACK keys. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - correct initial brightnessJonathan Bakker
tm2-touchkey doesn't have brightness levels, but only on/off states, so replace LED_FULL with LED_ON. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - add support for midas touchkeySimon Shields
The touchkey on midas boards is almost identical. The only real difference is that it uses the same register for both keycode and base. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-04Input: soc_button_array - fix mapping of the 5th GPIO in a PNP0C40 deviceHans de Goede
The Microsoft documenation for the PNP0C40 device aka the "Windows-compatible button array" describes the 5th GpioInt listed in the resources as: '5. Interrupt corresponding to the "Rotation Lock" button, if supported'. Notice this describes the 5th entry as a button while we sofar have been mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232 which actually comes with a rotation-lock button, the button indeed is a button and not a slider/switch. An image search for other Windows tablets has found 2 more models with a rotation-lock button and on both of those it too is a push-button and not a slider/switch. Further evidence can be found in the HUT extension HUTRR52 from Microsoft which adds rotation lock support to the HUT, which describes 2 different usages: "0xC9 System Display Rotation Lock Button" and "0xCA System Display Rotation Lock Slider Switch" note that switch is seen as a separate thing here and the non switch wording is an exact match for the "Windows-compatible button array" spec wording. TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong because the 5th GPIO is for a push-button not a switch. This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-04Input: soc_button_array - add usage-page 0x01 usage-id 0xca mappingHans de Goede
The ACPI0011 _DSD button descriptor on a CHT based Intel Compute Sticks contains a mapping for usage-page 0x01 usage-id 0xca. As described in hutrr52_system_display_rotation_lock_controls_0.pdf this should be mapped as a "System Display Rotation Lock Slider Switch", this commit adds support for this, silencing the following warning: soc_button_array ACPI0011:00: Unknown button index 4 upage 01 usage ca, ignoring Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-28Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.21 merge window.
2018-12-28Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573GPatrick Dreyer
This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by: Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-28Input: atmel_mxt_ts - don't try to free unallocated kernel memorySanjeev Chugh
If the user attempts to update Atmel device with an invalid configuration cfg file, error handling code is trying to free cfg file memory which is not allocated yet hence results into kernel crash. This patch fixes the order of memory free operations. Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com> Fixes: a4891f105837 ("Input: atmel_mxt_ts - zero terminate config firmware file") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-26Merge branch 'parisc-4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The major change in this patchset is the new system call table generation support from Firoz Khan" * 'parisc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: syscalls: ignore nfsservctl for other architectures parisc: generate uapi header and system call table files parisc: add system call table generation support parisc: remove __NR_Linux from uapi header file. parisc: add __NR_syscalls along with __NR_Linux_syscalls parisc: move __IGNORE* entries to non uapi header parisc: Fix HP SDC hpa address output parisc: Fix serio address output parisc: Split out alternative live patching code
2018-12-21Input: drv2667 - fix indentation issuesColin Ian King
There are some statements that are indented incorrectly, fix this by removing the extra tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Switching a few devices with Synaptics over to SMbus and disabling SMbus on a couple devices with Elan touchpads as they need more plumbing on PS/2 side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - enable SMBus for HP EliteBook 840 G4 Input: elantech - disable elan-i2c for P52 and P72 Input: synaptics - enable RMI on ThinkPad T560 Input: omap-keypad - fix idle configuration to not block SoC idle states
generated by cgit (git 2.34.1) at 2024-06-10 13:29:30 +0000