summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2017-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
2017-05-11Input: cros_ec_keyb - remove extraneous 'const'Arnd Bergmann
gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains a 'const' keyword: drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); This removes the extra one. Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-10Merge tag 'hwparam-20170420' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-05-10Input: add support for PlayStation 1/2 joypads connected via SPITomohiro Yoshidomi
PlayStation 1/2 joypads can be connected directly to the SPI interface. Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer SabertoothBenjamin Valentin
Add USB IDs for two more Xbox 360 controllers. I found them in the pull requests for the xboxdrv userspace driver, which seems abandoned. Thanks to psychogony and mkaito for reporting the IDs there! Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - sync supported devices with xboxdrvBenjamin Valentin
The userspace xboxdrv driver [0] contains some USB IDs unknown to the kernel driver. I have created a simple script [1] to extract the missing devices and add them to xpad. A quick google search confirmed that all the new devices called Fightstick/pad are Arcade-type devices [2] where the MAP_TRIGGERS_TO_BUTTONS option should apply. There are some similar devices in the existing device table where this flag is not set, but I did refrain from changing those. [0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp [1] http://codepad.org/CHV98BNH [2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=isch Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - sort supported devices by USB IDBenjamin Valentin
Some entries in the table of supported devices are out of order. To not create a mess when adding new ones using a script, sort them first. Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-04Merge tag 'char-misc-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
2017-05-04Merge tag 'gpio-v4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ...
2017-05-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ...
2017-05-03Merge tag 'mfd-next-4.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ...
2017-05-02Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.12 merge window.
2017-05-01Input: ar1021_i2c - use BIT to check for a bitMartin Kepplinger
The MSB for the first byte of touch data transmission is always 1. Make it a little more obvious we're testing this bit by using BIT(7). Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: twl4030-pwrbutton - use input_set_capability() helperSebastian Reichel
Cleanup driver slightly by using input_set_capability() instead of manually setting the required bits. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: twl4030-pwrbutton - use correct device for irq requestSebastian Reichel
The interrupt should be requested for the platform device and not for the input device. Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: ar1021_i2c - enable touch mode during openMartin Kepplinger
The device could as well be in command mode, in which this driver cannot handle the device. When opening the device, let's make sure the device will be in the mode we expect it to be for this driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "Yet another quirk to i8042 to get touchpad recognized on some laptops" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo P650RS to the i8042 reset list
2017-04-27input: touchscreen: mxs-lradc: || vs && typosDan Carpenter
These tests are meaningless as is because "adapt" can't possibly be both less than 1 and greater than 32. Fixes: d81ca730e3e4 ("input: touchscreen: mxs-lradc: Add support for touchscreen") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27Merge branches 'ib-mfd-gpio-4.12', 'ib-mfd-iio-input-4.12', ↵Lee Jones
'ib-mfd-input-4.12', 'ib-mfd-leds-4.12', 'ib-mfd-phy-4.12' and 'ib-mfd-pinctrl-samsung-4.12' into ibs-for-mfd-merged
2017-04-24Input: i8042 - add Clevo P650RS to the i8042 reset listDmitry Torokhov
Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by: Paweł Bylica <chfast@gmail.com> Tested-by: Ed Bordin <edbordin@gmail.com> Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixlet from Dmitry Torokhov: "An update to Elan PS/2 driver to allow working on yet another Lifebook" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add Fujitsu Lifebook E547 to force crc_enabled
2017-04-20Annotate hardware config module parameters in drivers/input/David Howells
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/input/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> cc: linux-input@vger.kernel.org
2017-04-19Input: xen-kbdfront - add module parameter for setting resolutionJuergen Gross
Add a parameter for setting the resolution of xen-kbdfront in order to be able to cope with a (virtual) frame buffer of arbitrary resolution. While at it remove the pointless second reading of parameters from Xenstore in the device connection phase: all parameters are available during device probing already and that is where they should be read. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18Input: elantech - add Fujitsu Lifebook E547 to force crc_enabledThorsten Leemhuis
Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Cc: stable@vger.kernel.org Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a small update to xpad driver to recognize yet another gamepad, and another change making sure userio.h is exported" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for Razer Wildcat gamepad uapi: add missing install of userio.h
2017-04-14Input: synaptics-rmi4 - enable IRQ operation in F34 V7Nick Dyer
The polled firmware update proved unreliable when testing on S7817. Use attention to signal commands are complete. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - change F12 clip to inactive border debugNick Dyer
The data in F12_2D_Ctrl8 corresponds to the inactive border width used by the RMI device. It is not in pixel units and should not be treated as a clip value. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - use dev_driver_string when registering interruptNick Dyer
When IRQ handling was moved to rmi_driver in 3aeed5b the naming of the interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch restores the previous behaviour and makes the interrupt easier to identify in /proc/interrupts. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - highlight support for AR1020Martin Kepplinger
ar1021_i2c also supports the ar1020 device I'm using. This is tested. They also share the same datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf So let users see that they have a compatible in front of them by adding AR1020 to the driver's description. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - do not force raising edge IRQ triggerDmitry Torokhov
We should not be forcing edge triggered interrupt, but rather let platform decide the kind of trigger it needs to use. Also, the driver is not quite safe with regard to edge-triggered interrupts as it does not try to kick the controller after requesting/enabling IRQ. Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - fix too long name in driver's device tableDmitry Torokhov
The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: ar1021_i2c - coding style fixesMartin Kepplinger
Use the common kernel coding style and corrently align parameters with open parenthesis. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: lpc32xx_ts - check for clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: imx6ul_tsc - fix error handlingFabio Estevam
If imx6ul_tsc_init() fails we should not return directly. We should disable the previously acquired clocks in this case. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-11input: cpcap-pwrbutton: New driverSebastian Reichel
Motorola CPCAP is a PMIC found in multiple smartphones. This driver adds support for the power/on button and has been tested in Droid 4. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-10Input: omap-keypad - fix error handling codeChristophe JAILLET
According to the previous error handling code, it is likely that 'goto err_free_keymap' is expected here in order to avoid a memory leak in error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: xpad - add support for Razer Wildcat gamepadCameron Gutman
Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: xpad - support some quirky Xbox One padsCameron Gutman
There are several quirky Xbox One pads that depend on initialization packets that the Microsoft pads don't require. To deal with these, I've added a mechanism for issuing device-specific initialization packets using a VID/PID-based quirks list. For the initial set of init quirks, I have added quirk handling from Valve's Steam Link xpad driver[0] and the 360Controller project[1] for macOS to enable some new pads to work properly. This should enable full functionality on the following quirky pads: 0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional) 0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional) 0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional) [0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c [1]: https://github.com/360Controller/360Controller Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: yealink - define packet offset __be16 instead of u16Martin Kepplinger
sparse says warning: incorrect type in assignment (different base types) expected unsigned short [unsigned] [usertype] offset got restricted __be16 [usertype] <noident> for every usage of cpu_to_be16 in yealink.c. Defining it __be16 in the first place shouldn't hurt. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Henk.Vergonet@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: turbografx - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: locomokbd - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: gameport - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: db9 - use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: soc_button_array - properly map usage 0x07/0xe3 to KEY_LEFTMETAHans de Goede
When submitting the support for the ACPI0011 windows tablet keys device I mapped the "windows" logo homekey to KEY_HOMEPAGE. But this is inconsistent with how it is done on windows tablets using the old PNP0C40 ACPI device and it does not match the HUT spec, which says that usage-page 7 usage 0xe3 is "Keyboard Left GUI". This commit maps usage-page 7 usage 0xe3 to KEY_LEFTMETA fixing this. Fixes: 4c3362f44980 ("Input: soc_button_array - add support for ACPI 6.0...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - add support for pm8916's vibratorDamien Riegel
Add pm8xxx_regs for this PMIC and the device tree match table entry. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - handle separate enable registerDamien Riegel
Some PMIC vibrator IPs use a separate enable register to turn the vibrator on and off. To detect if a vibrator uses this feature, rely on the enable_mask being non-zero. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - parametrize the driverDamien Riegel
In order to prepare this driver to support other vibrators of the same kind, move some hardcoded values to a structure holding register parameters (address, mask, shit of the control register). Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - reorder header alphabeticallyDamien Riegel
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: sur40 - fix bad endianness handling in sur40_pollMartin Kepplinger
sparse says: sur40.c:372:40: warning: restricted __le32 degrades to integer the header's data is __le32 so we need to convert it before comparing. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: eeti_ts - switch to gpiod APIDmitry Torokhov
gpiod API allows standard way of specifying GPIO polarity and takes it into account when reading or setting GPIO state. It also allows us to switch to common way of obtaining GPIO descriptor and away form legacy platform data. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>