summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2019-03-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - update the ili210x touchscreen driver, refreshing the code and adding support for ILI251X line - add support for st1633 to the st1232 touchscreen driver - add support for sx8650 to the the sx8654 touchscreen driver - add support for Evervision FT5726 to the edt-ft5x06 touchscreen driver - add support for gt5688 to the Goodix touchscreen driver - new vibrator driver for MSM SOCs - miscellaneous fixes for the rest of input drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: wacom_serial4 - add support for Wacom ArtPad II tablet Input: elan_i2c - add id for touchpad found in Lenovo s21e-20 Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV Input: msm-vibrator - use correct gpio header Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev' Input: i8042 - rework DT node name comparisons Input: goodix - print values in case of inconsistencies Input: goodix - refer to touchscreen.txt in device tree bindings Input: goodix - support Goodix gt5688 Input: synaptics_i2c - remove redundant spinlock Input: db9 - mark expected switch fall-through Input: qt2160 - remove redundant spinlock Input: st1232 - handle common DT bindings Input: ims-pcu - switch to using brightness_set_blocking() Input: st1232 - switch to gpiod API Input: ili210x - fetch touchscreen geometry from DT Input: msm-vibrator - tweak an error message Input: tm2-touchkey - acknowledge that setting brightness is a blocking call Input: stmfts - acknowledge that setting brightness is a blocking call Input: ili210x - switch to using devm_device_add_group() ...
2019-03-09Input: wacom_serial4 - add support for Wacom ArtPad II tabletJason Gerecke
Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device: $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0 https://github.com/linuxwacom/xf86-input-wacom/issues/40 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: elan_i2c - add id for touchpad found in Lenovo s21e-20Vincent Batts
Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad. Signed-off-by: Vincent Batts <vbatts@hashbangbash.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEVArnd Bergmann
When CONFIG_INPUT_POLLDEV is disabled, we get a link error: drivers/input/touchscreen/raspberrypi-ts.o: In function `rpi_ts_probe': raspberrypi-ts.c:(.text+0xec): undefined reference to `devm_input_allocate_polled_device' raspberrypi-ts.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_input_allocate_polled_device' raspberrypi-ts.c:(.text+0x19c): undefined reference to `input_register_polled_device' raspberrypi-ts.c:(.text+0x19c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `input_register_polled_device' Select that symbol like we do from the other similar drivers. Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: msm-vibrator - use correct gpio headerArnd Bergmann
When CONFIG_GPIOLIB is not set, we get a couple of build errors during test building: drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_start': drivers/input/misc/msm-vibrator.c:79:3: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(vibrator->enable_gpio, 1); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_probe': drivers/input/misc/msm-vibrator.c:176:26: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", ^~~~~~~~~~~~~~ devm_gpio_free drivers/input/misc/msm-vibrator.c:177:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW drivers/input/misc/msm-vibrator.c:177:13: note: each undeclared identifier is reported only once for each function it appears in This is easy to avoid when we use gpio/consumer.h as the documented interface. Fixes: 0f681d09e66e ("Input: add new vibrator driver for various MSM SOCs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-03-06Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Arnd Bergmann: "Here are two branches that came relatively late during the linux-5.0 development cycle and have dependencies on the other branches: - On the TI OMAP platform, the CPSW Ethernet PHY mode selection driver is being replaced, this puts the final pieces in place - On the DaVinci platform, the interrupt handling code in arch/arm gets moved into a regular device driver in drivers/irqchip. Since they both had some time in linux-next after the 5.0-rc8 release, I'm sending them along with the other updates" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver ARM: davinci: remove intc related fields from davinci_soc_info irqchip: davinci-cp-intc: move the driver to drivers/irqchip ARM: davinci: cp-intc: remove redundant comments ARM: davinci: cp-intc: drop GPL license boilerplate ARM: davinci: cp-intc: use readl/writel_relaxed() ARM: davinci: cp-intc: unify error handling ARM: davinci: cp-intc: improve coding style ARM: davinci: cp-intc: request the memory region before remapping it ARM: davinci: cp-intc: use the new-style config structure ARM: davinci: cp-intc: convert all hex numbers to lowercase ARM: davinci: cp-intc: use a common prefix for all symbols ARM: davinci: cp-intc: add the new config structures for da8xx SoCs irqchip: davinci-cp-intc: add a new config structure ARM: davinci: cp-intc: add a wrapper around cp_intc_init() ARM: davinci: cp-intc: remove cp_intc.h irqchip: davinci-aintc: move the driver to drivers/irqchip ARM: davinci: aintc: remove unnecessary includes ARM: davinci: aintc: remove the timer-specific irq_set_handler() ARM: davinci: aintc: request memory region before remapping it ...
2019-03-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.1 merge window.
2019-02-20Merge tag 'davinci-for-v5.1/soc-part3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/late DaVinci SoC updates for v5.1 (part 3) ------------------------------------- This pull request gets rid of mach-davinci private interrupt controller implmentations (aintc and cp_initc) and moves them to drivers/irqchip. mach/irqs.h usage outside of mach-davinci has been rid of. The driver changes (input and irqchip) have been acked by respective maintainers. * tag 'davinci-for-v5.1/soc-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: (57 commits) ARM: davinci: remove intc related fields from davinci_soc_info irqchip: davinci-cp-intc: move the driver to drivers/irqchip ARM: davinci: cp-intc: remove redundant comments ARM: davinci: cp-intc: drop GPL license boilerplate ARM: davinci: cp-intc: use readl/writel_relaxed() ARM: davinci: cp-intc: unify error handling ARM: davinci: cp-intc: improve coding style ARM: davinci: cp-intc: request the memory region before remapping it ARM: davinci: cp-intc: use the new-style config structure ARM: davinci: cp-intc: convert all hex numbers to lowercase ARM: davinci: cp-intc: use a common prefix for all symbols ARM: davinci: cp-intc: add the new config structures for da8xx SoCs irqchip: davinci-cp-intc: add a new config structure ARM: davinci: cp-intc: add a wrapper around cp_intc_init() ARM: davinci: cp-intc: remove cp_intc.h irqchip: davinci-aintc: move the driver to drivers/irqchip ARM: davinci: aintc: remove unnecessary includes ARM: davinci: aintc: remove the timer-specific irq_set_handler() ARM: davinci: aintc: request memory region before remapping it ARM: davinci: aintc: unify error handling ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-19Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_suspend': drivers/input/touchscreen/ti_am335x_tsc.c:510:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_resume': drivers/input/touchscreen/ti_am335x_tsc.c:527:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] It's not used any more after 333e07ec4b33 ("Input: ti_am335x_tsc: Mark TSC device as wakeup source") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-19input: davinci_keyscan: remove unnecessary includesBartosz Golaszewski
The mach/ and asm/ includes are not needed in davinci_keyscan, but they will cause build problems once we make mach/irqs.h a private header for mach-davinci. Remove all unused header includes. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-18Input: i8042 - rework DT node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. For the root node on SUN DT, we need to retrieve the 'name' property as it is the rare case where the 'name' property and node name differ. With both changes, it removes direct access to the node name pointer. While at it, convert the open coded loop to use for_each_child_of_node(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - tweaks to Elan drivers (both PS/2 and I2C) to support new devices. Also revert of one of IDs as that device should really be driven by i2c-hid + hid-multitouch - a few drivers have been switched to set_brightness_blocking() call because they either were sleeping the their set_brightness() implementation or used workqueue but were not canceling it on unbind. - ps2-gpio and matrix_keypad needed to [properly] flush their works to avoid potential use-after-free on unbind. - other miscellaneous fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK Input: st-keyscan - fix potential zalloc NULL dereference Input: apanel - switch to using brightness_set_blocking() Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G" Input: qt2160 - switch to using brightness_set_blocking() Input: matrix_keypad - use flush_delayed_work() Input: ps2-gpio - flush TX work when closing port Input: cap11xx - switch to using set_brightness_blocking() Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780 Input: bma150 - register input device after setting private data Input: pwm-vibra - stop regulator after disabling pwm, not before Input: pwm-vibra - prevent unbalanced regulator Input: snvs_pwrkey - allow selecting driver for i.MX 7D
2019-02-16Input: goodix - print values in case of inconsistenciesGuido Günther
"Invalid config" gives little idea what's wrong. Print the values that must not be 0 so we know which ones are off. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: goodix - support Goodix gt5688Guido Günther
From what I've seen in vendor trees it's fine to treat this as gt1x¹. Tested on the Purism Librem 5 Devkit (Rocktech JH057N00900 panel). [1]: https://github.com/TadiT7/android_kernel_mtk-4.4/tree/master/drivers/input/touchscreen/mediatek/GT5688 Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: synaptics_i2c - remove redundant spinlockSven Van Asbroeck
Remove a leftover spinlock. This was required back when mod_delayed_work() did not exist, and had to be implemented with a cancel + queue. See commit e7c2f967445d ("workqueue: use mod_delayed_work() instead of __cancel + queue") schedule_delayed_work() and mod_delayed_work() can now be used concurrently. So the spinlock is no longer needed. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISKMauro Ciancio
This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by: Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: st-keyscan - fix potential zalloc NULL dereferenceGabriel Fernandez
This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: apanel - switch to using brightness_set_blocking()Dmitry Torokhov
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. As a bonus, we are no longer forgetting to cancel it when we unbind the driver. Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: db9 - mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/joystick/db9.c: In function ‘db9_saturn_read_packet’: drivers/input/joystick/db9.c:256:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (tmp == 0xff) { ^ drivers/input/joystick/db9.c:263:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: qt2160 - remove redundant spinlockSven Van Asbroeck
Remove a spinlock which prevents schedule_delayed_work() and mod_delayed_work() from executing concurrently. This was required back when mod_delayed_work() did not exist, and had to be implemented with a cancel + schedule. See commit e7c2f967445d ("workqueue: use mod_delayed_work() instead of __cancel + queue") schedule_delayed_work() and mod_delayed_work() can now be used concurrently. So the spinlock is no longer needed. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: st1232 - handle common DT bindingsMatthias Fend
This is required to specify generic touchscreen properties via DT. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: ims-pcu - switch to using brightness_set_blocking()Dmitry Torokhov
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: st1232 - switch to gpiod APIMartin Kepplinger
Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead of the old API. The st1232_ts_power() now passes on the inverted "poweron" value to reflect the correct logical value. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-11Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"Dmitry Torokhov
This reverts commit 7db54c89f0b30a101584e09d3729144e6170059d as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-11Input: qt2160 - switch to using brightness_set_blocking()Dmitry Torokhov
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work items. Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: ili210x - fetch touchscreen geometry from DTMarek Vasut
Fetching the geometry from the ILI251x registers seems unreliable and sometimes returns all zeroes. Add support for fetching the geometry and axis inversion from DT instead. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: msm-vibrator - tweak an error messageDan Carpenter
The PTR_ERR(NULL) value is zero and it's not useful to print that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: matrix_keypad - use flush_delayed_work()Dmitry Torokhov
We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: ps2-gpio - flush TX work when closing portDmitry Torokhov
To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: cap11xx - switch to using set_brightness_blocking()Dmitry Torokhov
Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-07Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela
Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-07Input: tm2-touchkey - acknowledge that setting brightness is a blocking callDmitry Torokhov
We need to access I2C bus when switching brightness, and that may block, therefore we have to set stmfts_brightness_set() as LED's brightness_set_blocking() method. Fixes: 72d1f2346ded ("Input: tm2-touchkey - add touchkey driver support for TM2") Acked-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-07Input: stmfts - acknowledge that setting brightness is a blocking callDmitry Torokhov
We need to turn regulators on and off when switching brightness, and that may block, therefore we have to set stmfts_brightness_set() as LED's brightness_set_blocking() method. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Acked-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-07Input: ili210x - switch to using devm_device_add_group()Dmitry Torokhov
By switching to devm_device_add_group() we can complete driver conversion to using managed resources and get rid of ili210x_i2c_remove(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - add ILI251X supportMarek Vasut
Add support for ILI251x touch controller. This controller is similar to the ILI210x, except for the following differences: - Does not support I2C R-W transfer, Read must be followed by an obscenely long delay, and then followed by Write - Does support 10 simultaneous touch inputs. - Touch data format is slightly different, pressure reporting does not work although the touch data contain such information. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - add OF match tableMarek Vasut
Add OF match table for the ili210x touchscreen. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - reorder probeMarek Vasut
Perform the register access only after the I2C client data are set, this is only done in preparation for the subsequent patch which uses the I2C client data in the register IO function. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - rework the touchscreen sample processingMarek Vasut
Get rid of the packed structures for representing data as that does not apply to other similar Ilitek touchscreens. Instead, implement a function which parses the data and reports touch events and coordinates. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - convert to devm IRQMarek Vasut
Convert the driver to devm_request_irq(), drop the related unmanaged deregistration code and add ili210x_irq_teardown() to tear the IRQ down and cancel possible touchscreen pending work. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - add reset GPIO supportMarek Vasut
The touchscreen can have a reset GPIO connected to it, add support for such an arrangement. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - convert to devm_ functionsMarek Vasut
Convert the driver to dev-managed allocations. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - drop get_pendown_stateMarek Vasut
The .get_pendown_state callback is set only by the platform data code, which was just removed. Thus, get_pendown_state() always returns false, so drop that altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: ili210x - drop platform data supportMarek Vasut
There is not a single user of the ili210x platform data in the kernel, just drop it. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: bma150 - register input device after setting private dataJonathan Bakker
Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: add new vibrator driver for various MSM SOCsBrian Masney
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: gpio-keys - add shutdown callbackFlorian Fainelli
On some platforms (e.g.: ARCH_BRCMSTB) it is possible to enter "poweroff" while leaving some wake-up sources enabled such as key presses in order to allow for the system to wake-up. Wire up a .shutdown() callback which calls into the existing gpio_keys_suspend() since the logic is essentially the same. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-04Input: sx8654 - do not override interrupt triggerDmitry Torokhov
We should rely on the interrupt trigger (level vs edge) set up by the firmware or board code instead of forcing what we consider appropriate. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-04Input: sx8654 - convert #defined flags to BIT(x)Richard Leitner
Some of the #defined register values are one-bit flags. Convert them to use the BIT(x) macro instead of 1 byte hexadecimal values. This improves readability and clarifies the intent. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-01Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and ↵Lee Jones
'ib-mfd-platform-5.1' into ibs-for-mfd-merged