| Age | Commit message (Collapse) | Author |
|---|
|
'iommu/ipmmu-vmsa' and 'iommu/iova' into iommu-next-20171113.0
|
|
The ARM SMMU identity mapping performance was poor compared with the
DMA mode. It was found that enable caching would restore the performance
back to normal. The S2CRB_TLBEN bit in the ACR register would allow for
caching of the stream to context register bypass transaction information.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that the kernel headers have synced with the relevant upstream
ACPICA updates, it's time to clean up the temporary local definitions.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that the core API issues its own post-unmap TLB sync call, push that
operation out from the io-pgtable-arm internals into the users. For now,
we leave the invalidation implicit in the unmap operation, since none of
the current users would benefit much from any change to that.
CC: Magnus Damm <damm+renesas@opensource.se>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
|
|
With all our hardware state tracked in such a way that we can naturally
restore it as part of the necessary reset, resuming is trivial, and
there's nothing to do on suspend at all.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Echoing what we do for Stream Map Entries, maintain a software shadow
state for context bank configuration. With this in place, we are mere
moments away from blissfully easy suspend/resume support.
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: fix sparse warning by only clearing .cfg during domain destruction]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The shutdown method disables the SMMU to avoid corrupting a new kernel
started with kexec.
Signed-off-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
I want to re-use some of these for qcom_iommu, which has (roughly) the
same context-bank registers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit c54451a "iommu/arm-smmu: Fix the error path in arm_smmu_add_device"
removed fwspec assignment in legacy_binding path as redundant which is
wrong. It needs to be updated after fwspec initialisation in
arm_smmu_register_legacy_master() as it is dereferenced later. Without
this there is a NULL-pointer dereference panic during boot on some hosts.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
fwspec->iommu_priv is available only after arm_smmu_master_cfg
instance has been allocated. We shouldn't free it before that.
Also it's logical to free the master cfg itself without
checking for fwspec.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
[will: remove redundant assignment to fwspec]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 523d7423e21b ("iommu/arm-smmu: Remove io-pgtable spinlock")
removed the locking used to serialise map/unmap calls into the io-pgtable
code from the ARM SMMU driver. This is good for performance, but opens
us up to a nasty race with TLB syncs because the TLB sync register is
shared within a context bank (or even globally for stage-2 on SMMUv1).
There are two cases to consider:
1. A CPU can be spinning on the completion of a TLB sync, take an
interrupt which issues a subsequent TLB sync, and then report a
timeout on return from the interrupt.
2. A CPU can be spinning on the completion of a TLB sync, but other
CPUs can continuously issue additional TLB syncs in such a way that
the backoff logic reports a timeout.
Rather than fix this by spinning for completion of prior TLB syncs before
issuing a new one (which may suffer from fairness issues on large systems),
instead reintroduce locking around TLB sync operations in the ARM SMMU
driver.
Fixes: 523d7423e21b ("iommu/arm-smmu: Remove io-pgtable spinlock")
Cc: Robin Murphy <robin.murphy@arm.com>
Reported-by: Ray Jui <ray.jui@broadcom.com>
Tested-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
With the io-pgtable code now robust against (valid) races, we no longer
need to serialise all operations with a lock. This might make broken
callers who issue concurrent operations on overlapping addresses go even
more wrong than before, but hey, they already had little hope of useful
or deterministic results.
We do however still have to keep a lock around to serialise the ATS1*
translation ops, as parallel iova_to_phys() calls could lead to
unpredictable hardware behaviour otherwise.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Once we remove the serialising spinlock, a potential race opens up for
non-coherent IOMMUs whereby a caller of .map() can be sure that cache
maintenance has been performed on their new PTE, but will have no
guarantee that such maintenance for table entries above it has actually
completed (e.g. if another CPU took an interrupt immediately after
writing the table entry, but before initiating the DMA sync).
Handling this race safely will add some potentially non-trivial overhead
to installing a table entry, which we would much rather avoid on
coherent systems where it will be unnecessary, and where we are stirivng
to minimise latency by removing the locking in the first place.
To that end, let's introduce an explicit notion of cache-coherency to
io-pgtable, such that we will be able to avoid penalising IOMMUs which
know enough to know when they are coherent.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Revision C of IORT now allows us to identify ARM MMU-401 and the Cavium
ThunderX implementation. Wire them up so that we can probe these models
once firmware starts using the new codes in place of generic ones, and
so that the appropriate features and quirks get enabled when we do.
For the sake of backports and mitigating sychronisation problems with
the ACPICA headers, we'll carry a backup copy of the new definitions
locally for the short term to make life simpler.
CC: stable@vger.kernel.org # 4.10
Acked-by: Robert Richter <rrichter@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
For software initiated address translation, when domain type is
IOMMU_DOMAIN_IDENTITY i.e SMMU is bypassed, mimic HW behavior
i.e return the same IOVA as translated address.
This patch is an extension to Will Deacon's patchset
"Implement SMMU passthrough using the default domain".
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
From code "SMR mask 0x%x out of range for SMMU", so, we need to use mask, not
sid.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that the appropriate ordering is enforced via probe-deferral of
masters in core code, rip it all out and bask in the simplicity.
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[Sricharan: Rebased on top of ACPI IORT SMMU series]
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In preparation for allowing the default domain type to be overridden,
this patch adds support for IOMMU_DOMAIN_IDENTITY domains to the
ARM SMMU driver.
An identity domain is created by placing the corresponding S2CR
registers into "bypass" mode, which allows transactions to flow through
the SMMU without any translation.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The ARM SMMU drivers provide a DOMAIN_ATTR_NESTING domain attribute,
which allows callers of the IOMMU API to request that the page table
for a domain is installed at stage-2, if supported by the hardware.
Since setting this attribute only makes sense for UNMANAGED domains,
this patch returns -ENODEV if the domain_{get,set}_attr operations are
called on other domain types.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The current SMR masking support using a 2-cell iommu-specifier is
primarily intended to handle individual masters with large and/or
complex Stream ID assignments; it quickly gets a bit clunky in other SMR
use-cases where we just want to consistently mask out the same part of
every Stream ID (e.g. for MMU-500 configurations where the appended TBU
number gets in the way unnecessarily). Let's add a new property to allow
a single global mask value to better fit the latter situation.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
On relatively slow development platforms and software models, the
inefficiency of our TLB sync loop tends not to show up - for instance on
a Juno r1 board I typically see the TLBI has completed of its own accord
by the time we get to the sync, such that the latter finishes instantly.
However, on larger systems doing real I/O, it's less realistic for the
TLBs to go idle immediately, and at that point falling into the 1MHz
polling loop turns out to throw away performance drastically. Let's
strike a balance by polling more than once between pauses, such that we
have much more chance of catching normal operations completing before
committing to the fixed delay, but also backing off exponentially, since
if a sync really hasn't completed within one or two "reasonable time"
periods, it becomes increasingly unlikely that it ever will.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
TLB synchronisation typically involves the SMMU blocking all incoming
transactions until the TLBs report completion of all outstanding
operations. In the common SMMUv2 configuration of a single distributed
SMMU serving multiple peripherals, that means that a single unmap
request has the potential to bring the hammer down on the entire system
if synchronised globally. Since stage 1 contexts, and stage 2 contexts
under SMMUv2, offer local sync operations, let's make use of those
wherever we can in the hope of minimising global disruption.
To that end, rather than add any more branches to the already unwieldy
monolithic TLB maintenance ops, break them up into smaller, neater,
functions which we can then mix and match as appropriate.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
ARM_AMMU_CB() is calculated relative to ARM_SMMU_CB_BASE(), but the
latter is never of use on its own, and what we end up with is the same
ARM_SMMU_CB_BASE() + ARM_AMMU_CB() expression being duplicated at every
callsite. Folding the two together gives us a self-contained context
bank accessor which is much more pleasant to work with.
Secondly, we might as well simplify CB_BASE itself at the same time.
We use the address space size for its own sake precisely once, at probe
time, and every other usage is to dynamically calculate CB_BASE over
and over and over again. Let's flip things around so that we just
maintain the CB_BASE address directly.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Calculating ASIDs/VMIDs dynamically from arm_smmu_cfg was a neat trick,
but the global uniqueness workaround makes it somewhat more awkward, and
means we end up having to pass extra state around in certain cases just
to keep a handle on the offset.
We already have 16 bits going spare in arm_smmu_cfg; let's just
precalculate an ASID/VMID, plop it in there, and tidy up the users
accordingly. We'd also need something like this anyway if we ever get
near to thinking about SVM, so it's no bad thing.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
16-bit ASID should be enabled before initializing TTBR0/1,
otherwise only LSB 8-bit ASID will be considered. Hence
moving configuration of TTBCR register ahead of TTBR0/1
while initializing context bank.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
[will: rewrote comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Firmware is responsible for properly enabling smmu workarounds. Print
a message for better diagnostics when Cavium erratum 27704 was
detected.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that we're applying the IOMMU API reserved regions to our IOVA
domains, we shouldn't need to privately special-case PCI windows, or
indeed anything else which isn't specific to our iommu-dma layer.
However, since those aren't IOMMU-specific either, rather than start
duplicating code into IOMMU drivers let's transform the existing
function into an iommu_get_resv_regions() helper that they can share.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The introduction of reserved regions has left a couple of rough edges
which we could do with sorting out sooner rather than later. Since we
are not yet addressing the potential dynamic aspect of software-managed
reservations and presenting them at arbitrary fixed addresses, it is
incongruous that we end up displaying hardware vs. software-managed MSI
regions to userspace differently, especially since ARM-based systems may
actually require one or the other, or even potentially both at once,
(which iommu-dma currently has no hope of dealing with at all). Let's
resolve the former user-visible inconsistency ASAP before the ABI has
been baked into a kernel release, in a way that also lays the groundwork
for the latter shortcoming to be addressed by follow-up patches.
For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use
IOMMU_RESV_MSI to describe the hardware type, and document everything a
little bit. Since the x86 MSI remapping hardware falls squarely under
this meaning of IOMMU_RESV_MSI, apply that type to their regions as well,
so that we tell the same story to userspace across all platforms.
Secondly, as the various region types require quite different handling,
and it really makes little sense to ever try combining them, convert the
bitfield-esque #defines to a plain enum in the process before anyone
gets the wrong impression.
Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: kvm@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
|
|
And also move its remaining functionality to
iommu_device_register() and 'struct iommu_device'.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Also add the smmu devices to sysfs.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/core
|
|
The goal of erratum #27704 workaround was to make sure that ASIDs and VMIDs
are unique across all SMMU instances on affected Cavium systems.
Currently, the workaround code partitions ASIDs and VMIDs by increasing
global cavium_smmu_context_count which in turn becomes the base ASID and VMID
value for the given SMMU instance upon the context bank initialization.
For systems with multiple SMMU instances this approach implies the risk
of crossing 8-bit ASID, like for 1-socket CN88xx capable of 4 SMMUv2,
128 context banks each:
SMMU_0 (0-127 ASID RANGE)
SMMU_1 (127-255 ASID RANGE)
SMMU_2 (256-383 ASID RANGE) <--- crossing 8-bit ASID
SMMU_3 (384-511 ASID RANGE) <--- crossing 8-bit ASID
Since now we use 8-bit ASID (SMMU_CBn_TCR2.AS = 0) we effectively misconfigure
ASID[15:8] bits of SMMU_CBn_TTBRm register for SMMU_2/3. Moreover, we still
assume non-zero ASID[15:8] bits upon context invalidation. In the end,
except SMMU_0/1 devices all other devices under other SMMUs will fail on guest
power off/on. Since we try to invalidate TLB with 16-bit ASID but we actually
have 8-bit zero padded 16-bit entry.
This patch adds 16-bit ASID support for stage-1 AArch64 contexts so that
we use ASIDs consistently for all SMMU instances.
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
It is the time we have the real 16-bit Stream ID user, which is the
ThunderX. Its IO topology uses 1:1 map for Requester ID to Stream ID
translation for each root complex which allows to get full 16-bit
Stream ID. Firmware assigns bus IDs that are greater than 128 (0x80)
to some buses under PEM (external PCIe interface). Eventually SMMU
drops devices on that buses because their Stream ID is out of range:
pci 0006:90:00.0: stream ID 0x9000 out of range for SMMU (0x7fff)
To fix above issue enable the Extended Stream ID optional feature
when available.
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
IOMMU_CAP_INTR_REMAP has been advertised in arm-smmu(-v3) although
on ARM this property is not attached to the IOMMU but rather is
implemented in the MSI controller (GICv3 ITS).
Now vfio_iommu_type1 checks MSI remapping capability at MSI controller
level, let's correct this.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The get() populates the list with the MSI IOVA reserved window.
At the moment an arbitray MSI IOVA window is set at 0x8000000
of size 1MB. This will allow to report those info in iommu-group
sysfs.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Currently the driver sets all the device transactions privileges
to UNPRIVILEGED, but there are cases where the iommu masters wants
to isolate privileged supervisor and unprivileged user.
So don't override the privileged setting to unprivileged, instead
set it to default as incoming and let it be controlled by the pagetable
settings.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
'arm/exynos' into next
|
|
In ACPI based systems, in order to be able to create platform
devices and initialize them for ARM SMMU components, the IORT
kernel implementation requires a set of static functions to be
used by the IORT kernel layer to configure platform devices for
ARM SMMU components.
Add static configuration functions to the IORT kernel layer for
the ARM SMMU components, so that the ARM SMMU driver can
initialize its respective platform device by relying on the IORT
kernel infrastructure and by adding a corresponding ACPI device
early probe section entry.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Current ARM SMMU probe functions intermingle HW and DT probing
in the initialization functions to detect and programme the ARM SMMU
driver features. In order to allow probing the ARM SMMU with other
firmwares than DT, this patch splits the ARM SMMU init functions into
DT and HW specific portions so that other FW interfaces (ie ACPI) can
reuse the HW probing functions and skip the DT portion accordingly.
This patch implements no functional change, only code reshuffling.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Current ARM SMMU driver rely on the struct device.of_node pointer for
device look-up and iommu_ops retrieval.
In preparation for ACPI probing enablement, convert the driver to use
the struct device.fwnode member for device and iommu_ops look-up so that
the driver infrastructure can be used also on systems that do not
associate an of_node pointer to a struct device (eg ACPI), making the
device look-up and iommu_ops retrieval firmware agnostic.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The SMTNMB_TLBEN in the Auxiliary Configuration Register (ACR) provides an
option to enable the updation of TLB in case of bypass transactions due to
no stream match in the stream match table. This reduces the latencies of
the subsequent transactions with the same stream-id which bypasses the SMMU.
This provides a significant performance benefit for certain networking
workloads.
With this change substantial performance improvement of ~9% is observed with
DPDK l3fwd application (http://dpdk.org/doc/guides/sample_app_ug/l3_forward.html)
on NXP's LS2088a platform.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Check for iommu_gather_ops structures that are only stored in the tlb
field of an io_pgtable_cfg structure. The tlb field is of type
const struct iommu_gather_ops *, so iommu_gather_ops structures
having this property can be declared as const.
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When arm_smmu_device_group() finds an existing group due to Stream ID
aliasing, it should be taking an additional reference on that group.
Otherwise, the caller of iommu_group_get_for_dev() will inadvertently
remove the reference taken by iommu_group_add_device(), and the group
will be freed prematurely if any device is removed.
Reported-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When we iterate a master's config entries, what we generally care
about is the entry's stream map index, rather than the entry index
itself, so it's nice to have the iterator automatically assign the
former from the latter. Unfortunately, booting with KASAN reveals
the oversight that using a simple comma operator results in the
entry index being dereferenced before being checked for validity,
so we always access one element past the end of the fwspec array.
Flip things around so that the check always happens before the index
may be dereferenced.
Fixes: adfec2e709d2 ("iommu/arm-smmu: Convert to iommu_fwspec")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We seem to have forgotten to check that iommu_fwspecs actually belong to
us before we go ahead and dereference their private data. Oops.
Fixes: 021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The 32-bit ARM DMA configuration code predates the IOMMU core's default
domain functionality, and instead relies on allocating its own domains
and attaching any devices using the generic IOMMU binding to them.
Unfortunately, it does this relatively early on in the creation of the
device, before we've seen our add_device callback, which leads us to
attempt to operate on a half-configured master.
To avoid a crash, check for this situation on attach, but refuse to
play, as there's nothing we can do. This at least allows VFIO to keep
working for people who update their 32-bit DTs to the generic binding,
albeit with a few (innocuous) warnings from the DMA layer on boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
