| Age | Commit message (Collapse) | Author |
|---|
|
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The iter internally holds a pointer to the area and
iopt_area_contig_done() will dereference it. The pointer is not valid
outside the iova_rwsem.
syzkaller reports:
BUG: KASAN: slab-use-after-free in iommufd_access_unpin_pages+0x363/0x370
Read of size 8 at addr ffff888022286e20 by task syz-executor669/5771
CPU: 0 PID: 5771 Comm: syz-executor669 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
Call Trace:
<TASK>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11c/0x130
iommufd_access_unpin_pages+0x363/0x370
iommufd_test_access_unmap+0x24b/0x390
iommufd_access_notify_unmap+0x24c/0x3a0
iopt_unmap_iova_range+0x4c4/0x5f0
iopt_unmap_all+0x27/0x50
iommufd_ioas_unmap+0x3d0/0x490
iommufd_fops_ioctl+0x317/0x4b0
__x64_sys_ioctl+0x197/0x210
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fec1dae3b19
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fec1da74308 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fec1db6b438 RCX: 00007fec1dae3b19
RDX: 0000000020000100 RSI: 0000000000003b86 RDI: 0000000000000003
RBP: 00007fec1db6b430 R08: 00007fec1da74700 R09: 0000000000000000
R10: 00007fec1da74700 R11: 0000000000000246 R12: 00007fec1db6b43c
R13: 00007fec1db39074 R14: 6d6f692f7665642f R15: 0000000000022000
</TASK>
Allocated by task 5770:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_kmalloc+0xa2/0xb0
iopt_alloc_area_pages+0x94/0x560
iopt_map_user_pages+0x205/0x4e0
iommufd_ioas_map+0x329/0x5f0
iommufd_fops_ioctl+0x317/0x4b0
__x64_sys_ioctl+0x197/0x210
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 5770:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2e/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x8b/0x1c0
__kmem_cache_free+0xaf/0x2d0
iopt_unmap_iova_range+0x288/0x5f0
iopt_unmap_all+0x27/0x50
iommufd_ioas_unmap+0x3d0/0x490
iommufd_fops_ioctl+0x317/0x4b0
__x64_sys_ioctl+0x197/0x210
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The parallel unmap free'd iter->area the instant the lock was released.
Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping")
Link: https://lore.kernel.org/r/2-v2-9a03761d445d+54-iommufd_syz2_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+6c8d756f238a75fc3eb8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000905eba05fe38e9f2@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Yi Liu says
===================
The .bind_iommufd op of vfio emulated devices are either empty or does
nothing. This is different with the vfio physical devices, to add vfio
device cdev, need to make them act the same.
This series first makes the .bind_iommufd op of vfio emulated devices to
create iommufd_access, this introduces a new iommufd API. Then let the
driver that does not provide .bind_iommufd op to use the vfio emulated
iommufd op set. This makes all vfio device drivers have consistent iommufd
operations, which is good for adding new device uAPIs in the device cdev
===================
* branch 'vfio_mdev_ops':
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
vfio device cdev needs to return iommufd_access ID to userspace if
bind_iommufd succeeds.
Link: https://lore.kernel.org/r/20230327093351.44505-5-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are needs to created iommufd_access prior to have an IOAS and set
IOAS later. Like the vfio device cdev needs to have an iommufd object
to represent the bond (iommufd_access) and IOAS replacement.
Moves the iommufd_access_create() call into vfio_iommufd_emulated_bind(),
making it symmetric with the __vfio_iommufd_access_destroy() call in the
vfio_iommufd_emulated_unbind(). This means an access is created/destroyed
by the bind()/unbind(), and the vfio_iommufd_emulated_attach_ioas() only
updates the access->ioas pointer.
Since vfio_iommufd_emulated_bind() does not provide ioas_id, drop it from
the argument list of iommufd_access_create(). Instead, add a new access
API iommufd_access_attach() to set the access->ioas pointer. Also, set
vdev->iommufd_attached accordingly, similar to the physical pathway.
Link: https://lore.kernel.org/r/20230327093351.44505-3-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommufd wants to use more infrastructure, like the iommu_group, that the
mock device does not support. Create a more complete mock device that can
go through the whole cycle of ownership, blocking domain, and has an
iommu_group.
This requires creating a real struct device on a real bus to be able to
connect it to a iommu_group. Unfortunately we cannot formally attach the
mock iommu driver as an actual driver as the iommu core does not allow
more than one driver or provide a general way for busses to link to
iommus. This can be solved with a little hack to open code the dev_iommus
struct.
With this infrastructure things work exactly the same as the normal domain
path, including the auto domains mechanism and direct attach of hwpts. As
the created hwpt is now an autodomain it is no longer required to destroy
it and trying to do so will trigger a failure.
Link: https://lore.kernel.org/r/11-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The HWPT is always linked to an IOAS and once a HWPT exists its domain
should be fully mapped. This ended up being split up into device.c during
a two phase creation that was a bit confusing.
Move the iopt_table_add_domain() into iommufd_hw_pagetable_alloc() by
having it call back to device.c to complete the domain attach in the
required order.
Calling iommufd_hw_pagetable_alloc() with immediate_attach = false will
work on most drivers, but notably the SMMU drivers will fail because they
can't decide what kind of domain to create until they are attached. This
will be fixed when the domain_alloc function can take in a struct device.
Link: https://lore.kernel.org/r/6-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
hw_pagetable.c will need this in the next patches.
Link: https://lore.kernel.org/r/5-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A HWPT is permanently associated with an IOAS when it is created, remove
the strange situation where a refcount != 0 HWPT can have been
disconnected from the IOAS by putting all the IOAS related destruction in
the object destroy function.
Initializing a HWPT is two stages, we have to allocate it, attach it to a
device and then populate the domain. Once the domain is populated it is
fully linked to the IOAS.
Arrange things so that all the error unwinds flow through the
iommufd_hw_pagetable_destroy() and allow it to handle all cases.
Link: https://lore.kernel.org/r/4-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This should be added immediately after every iopt_table_add_domain(), and
deleted after every iopt_table_remove_domain() under the ioas->mutex.
Tidy things to be consistent.
Link: https://lore.kernel.org/r/3-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A later patch will require this locking - currently under the ioas mutex
the hwpt can not have a 0 reference and be on the list.
Link: https://lore.kernel.org/r/2-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The hwpt->devices list is locked by this, make it clearer.
Link: https://lore.kernel.org/r/1-v3-ae9c2975a131+2e1e8-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The hwpt is added to the hwpt_list only during its creation, it is never
added again. This hunk is some missed leftover from rework. Adding it
twice will corrupt the linked list in some cases.
It effects HWPT specific attachment, which is something the test suite
cannot cover until we can create a legitimate struct device with a
non-system iommu "driver" (ie we need the bus removed from the iommu code)
Cc: stable@vger.kernel.org
Fixes: e8d57210035b ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/1-v1-4336b5cb2fe4+1d7-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Trivially use the new API.
Link: https://lore.kernel.org/r/4-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Eric points out this is wrong for the rare case of someone using
allow_unsafe_interrupts on ARM. We always have to setup the MSI window in
the domain if the iommu driver asks for it.
Move the iommu_get_msi_cookie() setup to the top of the function and
always do it, regardless of the security mode. Add checks to
iommufd_device_setup_msi() to ensure the driver is not doing something
incomprehensible. No current driver will set both a HW and SW MSI window,
or have more than one SW MSI window.
Fixes: e8d57210035b ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/3-v1-0362a1a1c034+98-iommufd_fixes1_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
These are on performance paths so we protect them using the
CONFIG_IOMMUFD_TEST to not take a hit during normal operation.
These are useful when running the test suite and syzkaller to find data
structure inconsistencies early.
Link: https://lore.kernel.org/r/18-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Provide a mock kernel module for the iommu_domain that allows it to run
without any HW and the mocking provides a way to directly validate that
the PFNs loaded into the iommu_domain are correct. This exposes the access
kAPI toward userspace to allow userspace to explore the functionality of
pages.c and io_pagetable.c
The mock also simulates the rare case of PAGE_SIZE > iommu page size as
the mock will operate at a 2K iommu page size. This allows exercising all
of the calculations to support this mismatch.
This is also intended to support syzkaller exploring the same space.
However, it is an unusually invasive config option to enable all of
this. The config option should not be enabled in a production kernel.
Link: https://lore.kernel.org/r/16-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Eric Auger <eric.auger@redhat.com> # aarch64
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Kernel access is the mode that VFIO "mdevs" use. In this case there is no
struct device and no IOMMU connection. iommufd acts as a record keeper for
accesses and returns the actual struct pages back to the caller to use
however they need. eg with kmap or the DMA API.
Each caller must create a struct iommufd_access with
iommufd_access_create(), similar to how iommufd_device_bind() works. Using
this struct the caller can access blocks of IOVA using
iommufd_access_pin_pages() or iommufd_access_rw().
Callers must provide a callback that immediately unpins any IOVA being
used within a range. This happens if userspace unmaps the IOVA under the
pin.
The implementation forwards the access requests directly to the iopt
infrastructure that manages the iopt_pages_access.
Link: https://lore.kernel.org/r/14-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add the four functions external drivers need to connect physical DMA to
the IOMMUFD:
iommufd_device_bind() / iommufd_device_unbind()
Register the device with iommufd and establish security isolation.
iommufd_device_attach() / iommufd_device_detach()
Connect a bound device to a page table
Binding a device creates a device object ID in the uAPI, however the
generic API does not yet provide any IOCTLs to manipulate them.
Link: https://lore.kernel.org/r/13-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
