summaryrefslogtreecommitdiff
path: root/drivers/iommu/sun50i-iommu.c
AgeCommit message (Collapse)Author
2024-03-01iommu: constify of_phandle_args in xlateKrzysztof Kozlowski
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-10-02iommu: Allow .iotlb_sync_map to fail and handle s390's -ENOMEM returnNiklas Schnelle
On s390 when using a paging hypervisor, .iotlb_sync_map is used to sync mappings by letting the hypervisor inspect the synced IOVA range and updating a shadow table. This however means that .iotlb_sync_map can fail as the hypervisor may run out of resources while doing the sync. This can be due to the hypervisor being unable to pin guest pages, due to a limit on mapped addresses such as vfio_iommu_type1.dma_entry_limit or lack of other resources. Either way such a failure to sync a mapping should result in a DMA_MAPPING_ERROR. Now especially when running with batched IOTLB flushes for unmap it may be that some IOVAs have already been invalidated but not yet synced via .iotlb_sync_map. Thus if the hypervisor indicates running out of resources, first do a global flush allowing the hypervisor to free resources associated with these mappings as well a retry creating the new mappings and only if that also fails report this error to callers. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun50i Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230928-dma_iommu-v13-1-9e5fc4dacc36@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-09-25iommu/sun50i: Update to {map,unmap}_pagesRobin Murphy
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/395995e5097803f9a65f2fb79e0732d41c2b8a84.1694525662.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-09-25iommu/sun50i: Convert to generic_single_device_group()Jason Gunthorpe
Use the new helper. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/3-v1-c869a95191f2+5e8-iommu_single_grp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-09-25iommu: Convert simple drivers with DOMAIN_DMA to domain_alloc_paging()Jason Gunthorpe
These drivers are all trivially converted since the function is only called if the domain type is going to be IOMMU_DOMAIN_UNMANAGED/DMA. Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Steven Price <steven.price@arm.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yong Wu <yong.wu@mediatek.com> #For mtk_iommu.c Link: https://lore.kernel.org/r/23-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-09-25iommu/sun50i: Add an IOMMU_IDENTITIY_DOMAINJason Gunthorpe
Prior to commit 1b932ceddd19 ("iommu: Remove detach_dev callbacks") the sun50i_iommu_detach_device() function was being called by ops->detach_dev(). This is an IDENTITY domain so convert sun50i_iommu_detach_device() into sun50i_iommu_identity_attach() and a full IDENTITY domain and thus hook it back up the same was as the old ops->detach_dev(). Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/19-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-04-13iommu/sun50i: remove MODULE_LICENSE in non-modulesNick Alcock
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: iommu@lists.linux.dev Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@lists.linux.dev Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-01-13iommu: Remove detach_dev callbacksLu Baolu
The iommu core calls the driver's detach_dev domain op callback only when a device is finished assigning to user space and iommu_group_release_dma_owner() is called to return the device to the kernel, where iommu core wants to set the default domain to the device but the driver didn't provide one. In other words, if any iommu driver provides default domain support, the .detach_dev callback will never be called. This removes the detach_dev callbacks in those IOMMU drivers that support default domain. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-12-05iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITYJason Gunthorpe
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which cannot possibly be correct. UNMANAGED domains are required to start out blocking all DMAs. This seems to be what this driver does as it allocates a first level 'dt' for the IO page table that is 0 filled. Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be a mistake. Remove it. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-03iommu/sun50i: Implement .iotlb_sync_mapJernej Skrabec
Allocated iova ranges need to be invalidated immediately or otherwise they might or might not work when used by master or CPU. This was discovered when running video decoder conformity test with Cedrus. Some videos were now and then decoded incorrectly and generated page faults. According to vendor driver, it's enough to invalidate just start and end TLB and PTW cache lines. Documentation says that neighbouring lines must be invalidated too. Finally, when page fault occurs, that iova must be invalidated the same way, according to documentation. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221025165415.307591-6-jernej.skrabec@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-03iommu/sun50i: Fix flush sizeJernej Skrabec
Function sun50i_table_flush() takes number of entries as an argument, not number of bytes. Fix that mistake in sun50i_dte_get_page_table(). Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-03iommu/sun50i: Fix R/W permission checkJernej Skrabec
Because driver has enum type permissions and iommu subsystem has bitmap type, we have to be careful how check for combined read and write permissions is done. In such case, we have to mask both permissions and check that both are set at the same time. Current code just masks both flags but doesn't check that both are set. In short, it always sets R/W permission, regardles if requested permissions were RO, WO or RW. Fix that. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-03iommu/sun50i: Consider all fault sources for resetJernej Skrabec
We have to reset masters for all faults - permissions, L1 fault or L2 fault. Currently it's done only for permissions. If other type of fault happens, master is in locked up state. Fix that by really considering all fault sources. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-03iommu/sun50i: Fix reset releaseJernej Skrabec
Reset signal is asserted by writing 0 to the corresponding locations of masters we want to reset. So in order to deassert all reset signals, we should write 1's to all locations. Current code writes 1's to locations of masters which were just reset which is good. However, at the same time it also writes 0's to other locations and thus asserts reset signals of remaining masters. Fix code by writing all 1's when we want to deassert all reset signals. This bug was discovered when working with Cedrus (video decoder). When it faulted, display went blank due to reset signal assertion. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07iommu: Clean up bus_set_iommu()Robin Murphy
Clean up the remaining trivial bus_set_iommu() callsites along with the implementation. Now drivers only have to know and care about iommu_device instances, phew! Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390 Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390 Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ea383d5f4d74ffe200ab61248e5de6e95846180a.1660572783.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06iommu: Make .release_device optionalRobin Murphy
Many drivers do nothing meaningful for .release_device, and it's neatly abstracted to just two callsites in the core code, so let's make it optional to implement. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/bda9d3eb4527eac8f6544a15067e2529cca54a2e.1655822151.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-28iommu: Split struct iommu_opsLu Baolu
Move the domain specific operations out of struct iommu_ops into a new structure that only has domain specific operations. This solves the problem of needing to know if the method vector for a given operation needs to be retrieved from the device or the domain. Logically the domain ops are the ones that make sense for external subsystems and endpoint drivers to use, while device ops, with the sole exception of domain_alloc, are IOMMU API internals. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-18iommu/sun50i: Drop IOVA cookie managementRobin Murphy
The core code bakes its own cookies now. CC: Maxime Ripard <mripard@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/147edb0ba59be563df19cec3e63e621aa65b7b68.1628682048.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu: Streamline registration interfaceRobin Murphy
Rather than have separate opaque setter functions that are easy to overlook and lead to repetitive boilerplate in drivers, let's pass the relevant initialisation parameters directly to iommu_device_register(). Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/sun50i: Fix set-but-not-used variable warningJoerg Roedel
Fix the following warning the the SUN50I driver: drivers/iommu/sun50i-iommu.c: In function 'sun50i_iommu_irq': drivers/iommu/sun50i-iommu.c:890:14: warning: variable 'iova' set but not used [-Wunused-but-set-variable] 890 | phys_addr_t iova; | ^~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200904113906.3906-1-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-30iommu/sun50i: Remove unused variableMaxime Ripard
The pte_dma variable in the unmap callback is set but never used. Remove it. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200628180844.79205-2-maxime@cerno.tech Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-30iommu/sun50i: Change the readl timeout to the atomic variantMaxime Ripard
The flush_all_tlb call back can be called from an atomic context, so using readl_poll_timeout that embeds a udelay doesn't work. Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200628180844.79205-1-maxime@cerno.tech Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-27iommu/sun50i: Constify sun50i_iommu_opsRikard Falkeborn
The struct sun50i_iommu_ops is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 14358 2501 64 16923 421b drivers/iommu/sun50i-iommu.o After: text data bss dec hex filename 14726 2117 64 16907 420b drivers/iommu/sun50i-iommu.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200525214958.30015-3-rikard.falkeborn@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-19iommu/sun50i: Fix return value check in sun50i_iommu_probe()Wei Yongjun
In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() not NULL. The NULL test in the return value check must be replaced with IS_ERR(). Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200519091857.134170-1-weiyongjun1@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-14iommu/sun50i: Use __GFP_ZERO instead of memset()Joerg Roedel
Allocate zeroed memory so there is no need to memset it to 0 in the driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200514124621.25999-2-joro@8bytes.org
2020-05-14iommu/sun50i: Fix compile warningsJoerg Roedel
A few compile warnings show up when building this driver: CC drivers/iommu/sun50i-iommu.o drivers/iommu/sun50i-iommu.c: In function ‘sun50i_dte_get_page_table’: drivers/iommu/sun50i-iommu.c:486:16: warning: unused variable ‘flags’ [-Wunused-variable] 486 | unsigned long flags; | ^~~~~ drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_unmap’: drivers/iommu/sun50i-iommu.c:559:23: warning: unused variable ‘iommu’ [-Wunused-variable] 559 | struct sun50i_iommu *iommu = sun50i_domain->iommu; | ^~~~~ drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_probe_device’: drivers/iommu/sun50i-iommu.c:749:22: warning: unused variable ‘group’ [-Wunused-variable] 749 | struct iommu_group *group; | ^~~~~ Remove the unused variables. Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200514124621.25999-1-joro@8bytes.org
2020-05-14iommu: Add Allwinner H6 IOMMU driverMaxime Ripard
The Allwinner H6 has introduced an IOMMU for a few DMA controllers, mostly video related: the display engine, the video decoders / encoders, the camera capture controller, etc. The design is pretty simple compared to other IOMMUs found in SoCs: there's a single instance, controlling all the masters, with a single address space. It also features a performance monitoring unit that allows to retrieve various informations (per-master and global TLB accesses, hits and misses, access latency, etc) that isn't supported at the moment. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d122a8670361e36fc26b4ce2674a2223d30dc4cc.1589378833.git-series.maxime@cerno.tech Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit (git 2.34.1) at 2024-06-11 16:12:20 +0000