summaryrefslogtreecommitdiff
path: root/drivers/iommu
AgeCommit message (Collapse)Author
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-02Merge tag 'iommu-updates-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Conversion of the AMD IOMMU driver to use the dma-iommu code for imlementing the DMA-API. This gets rid of quite some code in the driver itself, but also has some potential for regressions (non are known at the moment). - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC. This also includes some firmware interface changes, but those are acked by the respective maintainers. - Preparatory work to support two distinct page-tables per domain in the ARM-SMMU driver - Power management improvements for the ARM SMMUv2 - Custom PASID allocator support - Multiple PCI DMA alias support for the AMD IOMMU driver - Adaption of the Mediatek driver to the changed IO/TLB flush interface of the IOMMU core code. - Preparatory patches for the Renesas IOMMU driver to support future hardware. * tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits) iommu/rockchip: Don't provoke WARN for harmless IRQs iommu/vt-d: Turn off translations at shutdown iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved iommu/arm-smmu: Remove duplicate error message iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing iommu/ipmmu-vmsa: Add utlb_offset_base iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers iommu/ipmmu-vmsa: tidyup register definitions iommu/ipmmu-vmsa: Remove all unused register definitions iommu/mediatek: Reduce the tlb flush timeout value iommu/mediatek: Get rid of the pgtlock iommu/mediatek: Move the tlb_sync into tlb_flush iommu/mediatek: Delete the leaf in the tlb_flush iommu/mediatek: Use gather to achieve the tlb range flush iommu/mediatek: Add a new tlb_lock for tlb_flush iommu/mediatek: Correct the flush_iotlb_all callback iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc iommu/io-pgtable-arm: Rationalise MAIR handling ...
2019-11-30Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-28Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-28Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Unify ACS quirk implementations (Bjorn Helgaas) * pci/virtualization: PCI: Unify ACS quirk desired vs provided checking PCI: Make ACS quirk implementations more uniform PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes PCI: Add DMA alias quirk for Intel VCA NTB PCI: Fix Intel ACS quirk UPDCR register address PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL() PCI/ATS: Remove unused PRI and PASID stubs PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h PCI/ATS: Cache PRI PRG Response PASID Required bit PCI/ATS: Cache PASID Capability offset PCI/ATS: Cache PRI Capability offset PCI/ATS: Disable PF/VF ATS service independently PCI/ATS: Handle sharing of PF PASID Capability with all VFs PCI/ATS: Handle sharing of PF PRI Capability with all VFs PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-26Merge branches 'acpi-utils', 'acpi-platform', 'acpi-video' and 'acpi-doc'Rafael J. Wysocki
* acpi-utils: iommu/amd: Switch to use acpi_dev_hid_uid_match() mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match() ACPI / LPSS: Switch to use acpi_dev_hid_uid_match() ACPI / utils: Introduce acpi_dev_hid_uid_match() helper ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI ACPI / utils: Describe function parameters in kernel-doc * acpi-platform: ACPI: platform: Unregister stale platform devices ACPI: Always build evged in * acpi-video: ACPI: video: update doc for acpi_video_bus_DOS() * acpi-doc: ACPI: Documentation: Minor spelling fix in namespace.rst
2019-11-21drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86Boqun Feng
Currently hyperv-iommu is implemented in a x86 specific way, for example, apic is used. So make the HYPERV_IOMMU Kconfig depend on X86 as a preparation for enabling HyperV on architecture other than x86. Cc: Lan Tianyu <Tianyu.Lan@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: linux-hyperv@vger.kernel.org Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21dma-mapping: treat dev->bus_dma_mask as a DMA limitNicolas Saenz Julienne
Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-12Merge branches 'iommu/fixes', 'arm/qcom', 'arm/renesas', 'arm/rockchip', ↵Joerg Roedel
'arm/mediatek', 'arm/tegra', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next
2019-11-12iommu/rockchip: Don't provoke WARN for harmless IRQsRobin Murphy
Although we don't generally expect IRQs to fire for a suspended IOMMU, there are certain situations (particularly with debug options) where we might legitimately end up with the pm_runtime_get_if_in_use() call from rk_iommu_irq() returning 0. Since this doesn't represent an actual error, follow the other parts of the driver and save the WARN_ON() condition for a genuine negative value. Even if we do have spurious IRQs due to a wedged VOP asserting the shared line, it's not this driver's job to try to second-guess the IRQ core to warn about that. Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/vt-d: Turn off translations at shutdownDeepa Dinamani
The intel-iommu driver assumes that the iommu state is cleaned up at the start of the new kernel. But, when we try to kexec boot something other than the Linux kernel, the cleanup cannot be relied upon. Hence, cleanup before we go down for reboot. Keeping the cleanup at initialization also, in case BIOS leaves the IOMMU enabled. I considered turning off iommu only during kexec reboot, but a clean shutdown seems always a good idea. But if someone wants to make it conditional, such as VMM live update, we can do that. There doesn't seem to be such a condition at this time. Tested that before, the info message 'DMAR: Translation was enabled for <iommu> but we are not in kdump mode' would be reported for each iommu. The message will not appear when the DMA-remapping is not enabled on entry to the kernel. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reservedYian Chen
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved for device use only and should not be part of allocable memory pool of OS. BIOS e820_table reports complete memory map to OS, including OS usable memory ranges and BIOS reserved memory ranges etc. x86 BIOS may not be trusted to include RMRR regions as reserved type of memory in its e820 memory map, hence validate every RMRR entry with the e820 memory map to make sure the RMRR regions will not be used by OS for any other purposes. ia64 EFI is working fine so implement RMRR validation as a dummy function Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Yian Chen <yian.chen@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/arm-smmu: Remove duplicate error messageJean-Philippe Brucker
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), platform_get_irq() displays an error when the IRQ isn't found. Remove the error print from the SMMU driver. Note the slight change of behaviour: no message is printed if platform_get_irq() returns -EPROBE_DEFER, which probably doesn't concern the SMMU. Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/arm-smmu-v3: Don't display an error when IRQ lines are missingJean-Philippe Brucker
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), platform_get_irq_byname() displays an error when the IRQ isn't found. Since the SMMUv3 driver uses that function to query which interrupt method is available, the message is now displayed during boot for any SMMUv3 that doesn't implement the combined interrupt, or that implements MSIs. [ 20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found [ 20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found [ 20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found [ 20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found Use platform_get_irq_byname_optional() to avoid displaying a spurious error. Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: Add utlb_offset_baseYoshihiro Shimoda
Since we will have changed memory mapping of the IPMMU in the future, this patch adds a utlb_offset_base into struct ipmmu_features for IMUCTR and IMUASID registers. No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: Add helper functions for "uTLB" registersYoshihiro Shimoda
Since we will have changed memory mapping of the IPMMU in the future, This patch adds helper functions ipmmu_utlb_reg() and ipmmu_imu{asid,ctr}_write() for "uTLB" registers. No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macroYoshihiro Shimoda
Since we will have changed memory mapping of the IPMMU in the future, this patch uses ipmmu_features values instead of a macro to calculate context registers offset. No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: Add helper functions for MMU "context" registersYoshihiro Shimoda
Since we will have changed memory mapping of the IPMMU in the future, This patch adds helper functions ipmmu_ctx_{reg,read,write}() for MMU "context" registers. No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: tidyup register definitionsYoshihiro Shimoda
To support different registers memory mapping hardware easily in the future, this patch tidies up the register definitions as below: - Add comments to state to which SoCs or SoC families they apply - Add categories about MMU "context" and uTLB registers No change behavior. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/ipmmu-vmsa: Remove all unused register definitionsYoshihiro Shimoda
To support different registers memory mapping hardware easily in the future, this patch removes all unused register definitions. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Reduce the tlb flush timeout valueYong Wu
Reduce the tlb timeout value from 100000us to 1000us. The original value would make the kernel stuck for 100 ms with interrupts disabled, which could have other side effects. The flush is expected to always take much less than 1 ms, so use that instead. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Get rid of the pgtlockYong Wu
Now we have tlb_lock for the HW tlb flush, then pgtable code hasn't needed the external "pgtlock" for a while. this patch remove the "pgtlock". Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Move the tlb_sync into tlb_flushYong Wu
Right now, the tlb_add_flush_nosync and tlb_sync always appear together. we merge the two functions into one(also move the tlb_lock into the new function). No functional change. Signed-off-by: Chao Hao <chao.hao@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Delete the leaf in the tlb_flushYong Wu
In our tlb range flush, we don't care the "leaf". Remove it to simplify the code. no functional change. "granule" also is unnecessary for us, Keep it satisfy the format of tlb_flush_walk. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Use gather to achieve the tlb range flushYong Wu
Use the iommu_gather mechanism to achieve the tlb range flush. Gather the iova range in the "tlb_add_page", then flush the merged iova range in iotlb_sync. Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Add a new tlb_lock for tlb_flushYong Wu
The commit 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync") help move the tlb_sync of unmap from v7s into the iommu framework. It helps add a new function "mtk_iommu_iotlb_sync", But it lacked the lock, then it will cause the variable "tlb_flush_active" may be changed unexpectedly, we could see this warning log randomly: mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds a new tlb_lock for tlb operations to fix this issue. Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/mediatek: Correct the flush_iotlb_all callbackYong Wu
Use the correct tlb_flush_all instead of the original one. Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-07iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve docWill Deacon
The 'IOMMU_QCOM_SYS_CACHE' IOMMU protection flag is exposed to all users of the IOMMU API. Despite its name, the idea behind it isn't especially tied to Qualcomm implementations and could conceivably be used by other systems. Rename it to 'IOMMU_SYS_CACHE_ONLY' and update the comment to describe a bit better the idea behind it. Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Isaac J. Manjarres" <isaacm@codeaurora.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Rationalise MAIR handlingRobin Murphy
Between VMSAv8-64 and the various 32-bit formats, there is either one 64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers. As such, keeping two 64-bit values in io_pgtable_cfg has always been overkill. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Simplify level indexingRobin Murphy
The nature of the LPAE format means that data->pg_shift is always redundant with data->bits_per_level, since they represent the size of a page and the number of PTEs per page respectively, and the size of a PTE is constant. Thus it works out more efficient to only store the latter, and derive the former via a trivial addition where necessary. Signed-off-by: Robin Murphy <robin.murphy@arm.com> [will: Reworked granule check in iopte_to_paddr()] Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Simplify PGD size handlingRobin Murphy
We use data->pgd_size directly for the one-off allocation and freeing of the top-level table, but otherwise it serves for ARM_LPAE_PGD_IDX() to repeatedly re-calculate the effective number of top-level address bits it represents. Flip this around so we store the form we most commonly need, and derive the lesser-used one instead. This cuts a whole bunch of code out of the map/unmap/iova_to_phys fast-paths. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Simplify start level lookupRobin Murphy
Beyond a couple of allocation-time calculations, data->levels is only ever used to derive the start level. Storing the start level directly leads to a small reduction in object code, which should help eke out a little more efficiency, and slightly more readable source to boot. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Simplify bounds checksRobin Murphy
We're merely checking that the relevant upper bits of each address are all zero, so there are cheaper ways to achieve that. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable-arm: Rationalise size checkRobin Murphy
It makes little sense to only validate the requested size after we think we've found a matching block size - making the check up-front is simple, and far more logical than waiting to walk off the bottom of the table to infer that we must have been passed a bogus size to start with. We're missing an equivalent check on the unmap path, so add that as well for consistency. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04iommu/io-pgtable: Make selftest gubbins consistently __initRobin Murphy
The selftests run as an initcall, but the annotation of the various callbacks and data seems to be somewhat arbitrary. Add it consistently for everything related to the selftests. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04Merge branch 'for-joerg/arm-smmu/fixes' into for-joerg/arm-smmu/updatesWill Deacon
Merge in ARM SMMU fixes to avoid conflicts in the ARM io-pgtable code. * for-joerg/arm-smmu/fixes: iommu/io-pgtable-arm: Support all Mali configurations iommu/io-pgtable-arm: Correct Mali attributes iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
2019-11-04iommu: arm-smmu-impl: Add sdm845 implementation hookVivek Gautam
Add reset hook for sdm845 based platforms to turn off the wait-for-safe sequence. Understanding how wait-for-safe logic affects USB and UFS performance on MTP845 and DB845 boards: Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic to address under-performance issues in real-time clients, such as Display, and Camera. On receiving an invalidation requests, the SMMU forwards SAFE request to these clients and waits for SAFE ack signal from real-time clients. The SAFE signal from such clients is used to qualify the start of invalidation. This logic is controlled by chicken bits, one for each - MDP (display), IFE0, and IFE1 (camera), that can be accessed only from secure software on sdm845. This configuration, however, degrades the performance of non-real time clients, such as USB, and UFS etc. This happens because, with wait-for-safe logic enabled the hardware tries to throttle non-real time clients while waiting for SAFE ack signals from real-time clients. On mtp845 and db845 devices, with wait-for-safe logic enabled by the bootloaders we see degraded performance of USB and UFS when kernel enables the smmu stage-1 translations for these clients. Turn off this wait-for-safe logic from the kernel gets us back the perf of USB and UFS devices until we re-visit this when we start seeing perf issues on display/camera on upstream supported SDM845 platforms. The bootloaders on these boards implement secure monitor callbacks to handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the logic can be toggled. There are other boards such as cheza whose bootloaders don't enable this logic. Such boards don't implement callbacks to handle the specific SCM call so disabling this logic for such boards will be a no-op. This change is inspired by the downstream change from Patrick Daly to address performance issues with display and camera by handling this wait-for-safe within separte io-pagetable ops to do TLB maintenance. So a big thanks to him for the change and for all the offline discussions. Without this change the UFS reads are pretty slow: $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync 10+0 records in 10+0 records out 10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s real 0m 22.39s user 0m 0.00s sys 0m 0.01s With this change they are back to rock! $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync 300+0 records in 300+0 records out 314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s real 0m 1.03s user 0m 0.00s sys 0m 0.54s Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-01iommu/arm-smmu: Avoid pathological RPM behaviour for unmapsRob Clark
When games, browser, or anything using a lot of GPU buffers exits, there can be many hundreds or thousands of buffers to unmap and free. If the GPU is otherwise suspended, this can cause arm-smmu to resume/suspend for each buffer, resulting 5-10 seconds worth of reprogramming the context bank (arm_smmu_write_context_bank()/arm_smmu_write_s2cr()/etc). To the user it would appear that the system just locked up. A simple solution is to use pm_runtime_put_autosuspend() instead, so we don't immediately suspend the SMMU device. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-30iommu/virtio: Remove unused variableCristiane Naves
Remove the variable of return. Issue found by coccicheck(scripts/coccinelle/misc/returnvar.cocci) Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/amd: Support multiple PCI DMA aliases in IRQ RemappingLogan Gunthorpe
Non-Transparent Bridge (NTB) devices (among others) may have many DMA aliases seeing the hardware will send requests with different device ids depending on their origin across the bridged hardware. See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") for more information on this. The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for IRQs so if devices send an interrupt from one of their aliases they will be blocked on AMD hardware with the IOMMU enabled. To fix this, ensure IRQ remapping is enabled for all aliases with MSI interrupts. This is analogous to the functionality added to the Intel IRQ remapping code in commit 3f0c625c6ae7 ("iommu/vt-d: Allow interrupts from the entire bus for aliased devices") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/amd: Support multiple PCI DMA aliases in device tableLogan Gunthorpe
Non-Transparent Bridge (NTB) devices (among others) may have many DMA aliases seeing the hardware will send requests with different device ids depending on their origin across the bridged hardware. See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") for more information on this. The AMD IOMMU ignores all the PCI aliases except the last one so DMA transfers from these aliases will be blocked on AMD hardware with the IOMMU enabled. To fix this, ensure the DTEs are cloned for every PCI alias. This is done by copying the DTE data for each alias as well as the IVRS alias every time it is changed. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/vt-d: Fix panic after kexec -p for kdumpJohn Donnelly
This cures a panic on restart after a kexec operation on 5.3 and 5.4 kernels. The underlying state of the iommu registers (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as "DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping(). [ 43.654737] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 43.655720] #PF: supervisor read access in kernel mode [ 43.655720] #PF: error_code(0x0000) - not-present page [ 43.655720] PGD 0 P4D 0 [ 43.655720] Oops: 0000 [#1] SMP PTI [ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.2-1940.el8uek.x86_64 #1 [ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018 [ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0 [ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff 74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0 01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b [ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246 [ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX: fffffffffffffffd [ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI: ffff8880477460b0 [ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09: ffff888047c01700 [ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12: 0000000000000000 [ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15: ffff888072d2b558 [ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000) knlGS:0000000000000000 [ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4: 00000000001606b0 [ 43.655720] Call Trace: [ 43.655720] ? intel_alloc_coherent+0x2a/0x180 [ 43.655720] ? __schedule+0x2c2/0x650 [ 43.655720] dma_alloc_attrs+0x8c/0xd0 [ 43.655720] dma_pool_alloc+0xdf/0x200 [ 43.655720] ehci_qh_alloc+0x58/0x130 [ 43.655720] ehci_setup+0x287/0x7ba [ 43.655720] ? _dev_info+0x6c/0x83 [ 43.655720] ehci_pci_setup+0x91/0x436 [ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754 [ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0 [ 43.655720] ehci_pci_probe+0x39/0x40 [ 43.655720] local_pci_probe+0x47/0x80 [ 43.655720] pci_device_probe+0xff/0x1b0 [ 43.655720] really_probe+0xf5/0x3a0 [ 43.655720] driver_probe_device+0xbb/0x100 [ 43.655720] device_driver_attach+0x58/0x60 [ 43.655720] __driver_attach+0x8f/0x150 [ 43.655720] ? device_driver_attach+0x60/0x60 [ 43.655720] bus_for_each_dev+0x74/0xb0 [ 43.655720] driver_attach+0x1e/0x20 [ 43.655720] bus_add_driver+0x151/0x1f0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] driver_register+0x70/0xc0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] __pci_register_driver+0x57/0x60 [ 43.655720] ehci_pci_init+0x6a/0x6c [ 43.655720] do_one_initcall+0x4a/0x1fa [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] kernel_init_freeable+0x1bd/0x262 [ 43.655720] ? rest_init+0xb0/0xb0 [ 43.655720] kernel_init+0xe/0x110 [ 43.655720] ret_from_fork+0x24/0x50 Fixes: 8af46c784ecfe ("iommu/vt-d: Implement is_attach_deferred iommu ops entry") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41Takashi Iwai
Acer Aspire A315-41 requires the very same workaround as the existing quirk for Dell Latitude 5495. Add the new entry for that. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/amd: Do not re-fetch iommu->cmd_buf_tailDenys Vlasenko
The compiler is not smart enough to realize that iommu->cmd_buf_tail can't be modified across memcpy: 41 8b 45 74 mov 0x74(%r13),%eax # iommu->cmd_buf_tail 44 8d 78 10 lea 0x10(%rax),%r15d # += sizeof(*cmd) 41 81 e7 ff 1f 00 00 and $0x1fff,%r15d # %= CMD_BUFFER_SIZE 49 03 45 68 add 0x68(%r13),%rax # target = iommu->cmd_buf + iommu->cmd_buf_tail 45 89 7d 74 mov %r15d,0x74(%r13) # store to iommu->cmd_buf_tail 49 8b 34 24 mov (%r12),%rsi # memcpy 49 8b 7c 24 08 mov 0x8(%r12),%rdi # memcpy 48 89 30 mov %rsi,(%rax) # memcpy 48 89 78 08 mov %rdi,0x8(%rax) # memcpy 49 8b 55 38 mov 0x38(%r13),%rdx # iommu->mmio_base 41 8b 45 74 mov 0x74(%r13),%eax # redundant load of iommu->cmd_buf_tail ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 89 82 08 20 00 00 mov %eax,0x2008(%rdx) # writel CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Joerg Roedel <jroedel@suse.de> CC: linux-kernel@vger.kernel.org Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/ipmmu-vmsa: Remove dev_err() on platform_get_irq() failureYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-26Merge tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in the intel-iommu get_required_mask conversion (Arvind Sankar)" * tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping: iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
2019-10-18iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMUArvind Sankar
We must return a mask covering the full physical RAM when bypassing the IOMMU mapping. Also, in iommu_need_mapping, we need to check using dma_direct_get_required_mask to ensure that the device's dma_mask can cover physical RAM before deciding to bypass IOMMU mapping. Based on an earlier patch from Christoph Hellwig. Fixes: 249baa547901 ("dma-mapping: provide a better default ->get_required_mask") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>