summaryrefslogtreecommitdiff
path: root/drivers/iommu
AgeCommit message (Collapse)Author
2021-11-26iommu/vt-d: Fix unmap_pages supportAlex Williamson
When supporting only the .map and .unmap callbacks of iommu_ops, the IOMMU driver can make assumptions about the size and alignment used for mappings based on the driver provided pgsize_bitmap. VT-d previously used essentially PAGE_MASK for this bitmap as any power of two mapping was acceptably filled by native page sizes. However, with the .map_pages and .unmap_pages interface we're now getting page-size and count arguments. If we simply combine these as (page-size * count) and make use of the previous map/unmap functions internally, any size and alignment assumptions are very different. As an example, a given vfio device assignment VM will often create a 4MB mapping at IOVA pfn [0x3fe00 - 0x401ff]. On a system that does not support IOMMU super pages, the unmap_pages interface will ask to unmap 1024 4KB pages at the base IOVA. dma_pte_clear_level() will recurse down to level 2 of the page table where the first half of the pfn range exactly matches the entire pte level. We clear the pte, increment the pfn by the level size, but (oops) the next pte is on a new page, so we exit the loop an pop back up a level. When we then update the pfn based on that higher level, we seem to assume that the previous pfn value was at the start of the level. In this case the level size is 256K pfns, which we add to the base pfn and get a results of 0x7fe00, which is clearly greater than 0x401ff, so we're done. Meanwhile we never cleared the ptes for the remainder of the range. When the VM remaps this range, we're overwriting valid ptes and the VT-d driver complains loudly, as reported by the user report linked below. The fix for this seems relatively simple, if each iteration of the loop in dma_pte_clear_level() is assumed to clear to the end of the level pte page, then our next pfn should be calculated from level_pfn rather than our working pfn. Fixes: 3f34f1259776 ("iommu/vt-d: Implement map/unmap_pages() iommu_ops callback") Reported-by: Ajay Garg <ajaygargnsit@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Link: https://lore.kernel.org/all/20211002124012.18186-1-ajaygargnsit@gmail.com/ Link: https://lore.kernel.org/r/163659074748.1617923.12716161410774184024.stgit@omen Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211126135556.397932-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-11-26iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock()Christophe JAILLET
If we return -EOPNOTSUPP, the rcu lock remains lock. This is spurious. Go through the end of the function instead. This way, the missing 'rcu_read_unlock()' is called. Fixes: 7afd7f6aa21a ("iommu/vt-d: Check FL and SL capability sanity in scalable mode") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/40cc077ca5f543614eab2a10e84d29dd190273f6.1636217517.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211126135556.397932-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-11-26iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568Alex Bee
With the submission of iommu driver for RK3568 a subtle bug was introduced: PAGE_DESC_HI_MASK1 and PAGE_DESC_HI_MASK2 have to be the other way arround - that leads to random errors, especially when addresses beyond 32 bit are used. Fix it. Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Signed-off-by: Alex Bee <knaerzche@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dan Johansen <strit@manjaro.org> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20211124021325.858139-1-knaerzche@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-11-26iommu/amd: Clarify AMD IOMMUv2 initialization messagesJoerg Roedel
The messages printed on the initialization of the AMD IOMMUv2 driver have caused some confusion in the past. Clarify the messages to lower the confusion in the future. Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20211123105507.7654-3-joro@8bytes.org
2021-11-06Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-04iommu/dart: Exclude MSI doorbell from PCIe device IOVA rangeMarc Zyngier
The MSI doorbell on Apple HW can be any address in the low 4GB range. However, the MSI write is matched by the PCIe block before hitting the iommu. It must thus be excluded from the IOVA range that is assigned to any PCIe device. Link: https://lore.kernel.org/r/20210929163847.2807812-9-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sven Peter <sven@svenpeter.dev>
2021-11-04Merge tag 'iommu-updates-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel IOMMU Updates fro Lu Baolu: - Dump DMAR translation structure when DMA fault occurs - An optimization in the page table manipulation code - Use second level for GPA->HPA translation - Various cleanups - Arm SMMU Updates from Will - Minor optimisations to SMMUv3 command creation and submission - Numerous new compatible string for Qualcomm SMMUv2 implementations - Fixes for the SWIOTLB based implemenation of dma-iommu code for untrusted devices - Add support for r8a779a0 to the Renesas IOMMU driver and DT matching code for r8a77980 - A couple of cleanups and fixes for the Apple DART IOMMU driver - Make use of generic report_iommu_fault() interface in the AMD IOMMU driver - Various smaller fixes and cleanups * tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits) iommu/dma: Fix incorrect error return on iommu deferred attach iommu/dart: Initialize DART_STREAMS_ENABLE iommu/dma: Use kvcalloc() instead of kvzalloc() iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable iommu/dart: Use kmemdup instead of kzalloc and memcpy iommu/vt-d: Avoid duplicate removing in __domain_mapping() iommu/vt-d: Convert the return type of first_pte_in_page to bool iommu/vt-d: Clean up unused PASID updating functions iommu/vt-d: Delete dev_has_feat callback iommu/vt-d: Use second level for GPA->HPA translation iommu/vt-d: Check FL and SL capability sanity in scalable mode iommu/vt-d: Remove duplicate identity domain flag iommu/vt-d: Dump DMAR translation structure when DMA fault occurs iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option iommu/arm-smmu-qcom: Request direct mapping for modem device iommu: arm-smmu-qcom: Add compatible for QCM2290 dt-bindings: arm-smmu: Add compatible for QCM2290 SoC iommu/arm-smmu-qcom: Add SM6350 SMMU compatible dt-bindings: arm-smmu: Add compatible for SM6350 SoC iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd() ...
2021-11-01Merge tag 'overflow-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "The end goal of the current buffer overflow detection work[0] is to gain full compile-time and run-time coverage of all detectable buffer overflows seen via array indexing or memcpy(), memmove(), and memset(). The str*() family of functions already have full coverage. While much of the work for these changes have been on-going for many releases (i.e. 0-element and 1-element array replacements, as well as avoiding false positives and fixing discovered overflows[1]), this series contains the foundational elements of several related buffer overflow detection improvements by providing new common helpers and FORTIFY_SOURCE changes needed to gain the introspection required for compiler visibility into array sizes. Also included are a handful of already Acked instances using the helpers (or related clean-ups), with many more waiting at the ready to be taken via subsystem-specific trees[2]. The new helpers are: - struct_group() for gaining struct member range introspection - memset_after() and memset_startat() for clearing to the end of structures - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs Also included is the beginning of the refactoring of FORTIFY_SOURCE to support memcpy() introspection, fix missing and regressed coverage under GCC, and to prepare to fix the currently broken Clang support. Finishing this work is part of the larger series[0], but depends on all the false positives and buffer overflow bug fixes to have landed already and those that depend on this series to land. As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time and run-time tests are added for FORTIFY_SOURCE and the mem*()-family functions respectively. The compile time tests have found a legitimate (though corner-case) bug[6] already. Please note that the appearance of "panic" and "BUG" in the FORTIFY_SOURCE refactoring are the result of relocating existing code, and no new use of those code-paths are expected nor desired. Finally, there are two tree-wide conversions for 0-element arrays and flexible array unions to gain sane compiler introspection coverage that result in no known object code differences. After this series (and the changes that have now landed via netdev and usb), we are very close to finally being able to build with -Warray-bounds and -Wzero-length-bounds. However, due corner cases in GCC[3] and Clang[4], I have not included the last two patches that turn on these options, as I don't want to introduce any known warnings to the build. Hopefully these can be solved soon" Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1] Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2] Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3] Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4] Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5] Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6] * tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) fortify: strlen: Avoid shadowing previous locals compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer treewide: Replace 0-element memcpy() destinations with flexible arrays treewide: Replace open-coded flex arrays in unions stddef: Introduce DECLARE_FLEX_ARRAY() helper btrfs: Use memset_startat() to clear end of struct string.h: Introduce memset_startat() for wiping trailing members and padding xfrm: Use memset_after() to clear padding string.h: Introduce memset_after() for wiping trailing members/padding lib: Introduce CONFIG_MEMCPY_KUNIT_TEST fortify: Add compile-time FORTIFY_SOURCE tests fortify: Allow strlen() and strnlen() to pass compile-time known lengths fortify: Prepare to improve strnlen() and strlen() warnings fortify: Fix dropped strcpy() compile-time write overflow check fortify: Explicitly disable Clang support fortify: Move remaining fortify helpers into fortify-string.h lib/string: Move helper functions out of string.c compiler_types.h: Remove __compiletime_object_size() cm4000_cs: Use struct_group() to zero struct cm4000_dev region can: flexcan: Use struct_group() to zero struct flexcan_regs regions ...
2021-11-01Merge tag 'x86_cc_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull generic confidential computing updates from Borislav Petkov: "Add an interface called cc_platform_has() which is supposed to be used by confidential computing solutions to query different aspects of the system. The intent behind it is to unify testing of such aspects instead of having each confidential computing solution add its own set of tests to code paths in the kernel, leading to an unwieldy mess" * tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide: Replace the use of mem_encrypt_active() with cc_platform_has() x86/sev: Replace occurrences of sev_es_active() with cc_platform_has() x86/sev: Replace occurrences of sev_active() with cc_platform_has() x86/sme: Replace occurrences of sme_active() with cc_platform_has() powerpc/pseries/svm: Add a powerpc version of cc_platform_has() x86/sev: Add an x86 version of cc_platform_has() arch/cc: Introduce a function to check for confidential computing features x86/ioremap: Selectively build arch override encryption functions
2021-10-31Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel
'arm/tegra', 'iommu/fixes', 'x86/amd', 'x86/vt-d' and 'core' into next
2021-10-28iommu/dma: Fix incorrect error return on iommu deferred attachLogan Gunthorpe
scsi_dma_map() was reporting a failure during boot on an AMD machine with the IOMMU enabled. scsi_dma_map failed: request for 36 bytes! The issue was tracked down to a mistake in logic: should not return an error if iommu_deferred_attach() returns zero. Reported-by: Marshall Midden <marshallmidden@gmail.com> Fixes: dabb16f67215 ("iommu/dma: return error code from iommu_dma_map_sg()") Link: https://lore.kernel.org/all/CAD2CkAWjS8=kKwEEN4cgVNjyFORUibzEiCUA-X+SMtbo0JoMmA@mail.gmail.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211027174757.119755-1-logang@deltatee.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-27iommu/dart: Initialize DART_STREAMS_ENABLESven Peter
DART has an additional global register to control which streams are isolated. This register is a bit redundant since DART_TCR can already be used to control isolation and is usually initialized to DART_STREAM_ALL by the time we get control. Some DARTs (namely the one used for the audio controller) however have some streams disabled initially. Make sure those work by initializing DART_STREAMS_ENABLE during reset. Reported-by: Martin Povišer <povik@protonmail.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211019162253.45919-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-27iommu/dma: Use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva
Use 2-factor argument form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210928222229.GA280355@embeddedor Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/tegra-smmu: Use devm_bitmap_zalloc when applicableChristophe JAILLET
'smmu->asids' is a bitmap. So use 'devm_kzalloc()' to simplify code, improve the semantic of the code and avoid some open-coded arithmetic in allocator arguments. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/2c0f4da80c3b5ef83299c651f69a563034c1c6cb.1632661557.git.christophe.jaillet@wanadoo.fr Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/dart: Use kmemdup instead of kzalloc and memcpyWan Jiabing
Fix following coccicheck warning: drivers/iommu/apple-dart.c:704:20-27: WARNING opportunity for kmemdup Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://lore.kernel.org/r/20211013063441.29888-1-wanjiabing@vivo.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Avoid duplicate removing in __domain_mapping()Longpeng(Mike)
The __domain_mapping() always removes the pages in the range from 'iov_pfn' to 'end_pfn', but the 'end_pfn' is always the last pfn of the range that the caller wants to map. This would introduce too many duplicated removing and leads the map operation take too long, for example: Map iova=0x100000,nr_pages=0x7d61800 iov_pfn: 0x100000, end_pfn: 0x7e617ff iov_pfn: 0x140000, end_pfn: 0x7e617ff iov_pfn: 0x180000, end_pfn: 0x7e617ff iov_pfn: 0x1c0000, end_pfn: 0x7e617ff iov_pfn: 0x200000, end_pfn: 0x7e617ff ... it takes about 50ms in total. We can reduce the cost by recalculate the 'end_pfn' and limit it to the boundary of the end of this pte page. Map iova=0x100000,nr_pages=0x7d61800 iov_pfn: 0x100000, end_pfn: 0x13ffff iov_pfn: 0x140000, end_pfn: 0x17ffff iov_pfn: 0x180000, end_pfn: 0x1bffff iov_pfn: 0x1c0000, end_pfn: 0x1fffff iov_pfn: 0x200000, end_pfn: 0x23ffff ... it only need 9ms now. This also removes a meaningless BUG_ON() in __domain_mapping(). Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Tested-by: Liujunjie <liujunjie23@huawei.com> Link: https://lore.kernel.org/r/20211008000433.1115-1-longpeng2@huawei.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211014053839.727419-10-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Clean up unused PASID updating functionsFenghua Yu
update_pasid() and its call chain are currently unused in the tree because Thomas disabled the ENQCMD feature. The feature will be re-enabled shortly using a different approach and update_pasid() and its call chain will not be used in the new approach. Remove the useless functions. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20210920192349.2602141-1-fenghua.yu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211014053839.727419-8-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Delete dev_has_feat callbackLu Baolu
The commit 262948f8ba573 ("iommu: Delete iommu_dev_has_feature()") has deleted the iommu_dev_has_feature() interface. Remove the dev_has_feat callback to avoid dead code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210929072030.1330225-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20211014053839.727419-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Use second level for GPA->HPA translationLu Baolu
The IOMMU VT-d implementation uses the first level for GPA->HPA translation by default. Although both the first level and the second level could handle the DMA translation, they're different in some way. For example, the second level translation has separate controls for the Access/Dirty page tracking. With the first level translation, there's no such control. On the other hand, the second level translation has the page-level control for forcing snoop, but the first level only has global control with pasid granularity. This uses the second level for GPA->HPA translation so that we can provide a consistent hardware interface for use cases like dirty page tracking for live migration. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20210926114535.923263-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20211014053839.727419-6-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Check FL and SL capability sanity in scalable modeLu Baolu
An iommu domain could be allocated and mapped before it's attached to any device. This requires that in scalable mode, when the domain is allocated, the format (FL or SL) of the page table must be determined. In order to achieve this, the platform should support consistent SL or FL capabilities on all IOMMU's. This adds a check for this and aborts IOMMU probing if it doesn't meet this requirement. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20210926114535.923263-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20211014053839.727419-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Remove duplicate identity domain flagLu Baolu
The iommu_domain data structure already has the "type" field to keep the type of a domain. It's unnecessary to have the DOMAIN_FLAG_STATIC_IDENTITY flag in the vt-d implementation. This cleans it up with no functionality change. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20210926114535.923263-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20211014053839.727419-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Dump DMAR translation structure when DMA fault occursKyung Min Park
When the dmar translation fault happens, the kernel prints a single line fault reason with corresponding hexadecimal code defined in the Intel VT-d specification. Currently, when user wants to debug the translation fault in detail, debugfs is used for dumping the dmar_translation_struct, which is not available when the kernel failed to boot. Dump the DMAR translation structure, pagewalk the IO page table and print the page table entry when the fault happens. This takes effect only when CONFIG_DMAR_DEBUG is enabled. Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Link: https://lore.kernel.org/r/20210815203845.31287-1-kyung.min.park@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211014053839.727419-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-18iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel optionTvrtko Ursulin
Handling of intel_iommu kernel command line option should return "true" to indicate option is valid and so avoid logging it as unknown by the core parsing code. Also log unknown sub-options at the notice level to let user know of potential typos or similar. Reported-by: Eero Tamminen <eero.t.tamminen@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://lore.kernel.org/r/20210831112947.310080-1-tvrtko.ursulin@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211014053839.727419-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-10-13iommu/arm: fix ARM_SMMU_QCOM compilationArnd Bergmann
My previous bugfix ended up making things worse for the QCOM IOMMU driver when it forgot to add the Kconfig symbol that is getting used to control the compilation of the SMMU implementation specific code for Qualcomm. Fixes: 424953cf3c66 ("qcom_scm: hide Kconfig symbol") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/lkml/20211010023350.978638-1-dmitry.baryshkov@linaro.org/ Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-08Merge tag 'asm-generic-fixes-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally
2021-10-08iommu/arm-smmu-qcom: Request direct mapping for modem deviceSibi Sankar
The SID configuration requirement for Modem on SC7280 is similar to the ones found on SC7180/SDM845 SoCs. So, add the SC7280 modem compatible to the list to defer the programming of the modem SIDs to the kernel. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1631886935-14691-5-git-send-email-sibis@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-04iommu: arm-smmu-qcom: Add compatible for QCM2290Loic Poulain
Add compatible for QCM2290 SMMU to use the Qualcomm Technologies, Inc. specific implementation. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1633096832-7762-1-git-send-email-loic.poulain@linaro.org [will: Sort by alphabetical order, add commit message] Signed-off-by: Will Deacon <will@kernel.org>
2021-10-04iommu/arm-smmu-qcom: Add SM6350 SMMU compatibleKonrad Dybcio
Add compatible for SM6350 SMMU to use the Qualcomm Technologies, Inc. specific implementation. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820202906.229292-2-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-04iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()Zhen Lei
1. Build command CMD_SYNC cannot fail. So the return value can be ignored. 2. The arm_smmu_cmdq_build_cmd() almost never fails, the addition of "unlikely()" can optimize the instruction pipeline. 3. Check the return value in arm_smmu_cmdq_batch_add(). Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210818080452.2079-2-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-04iommu/arm-smmu-v3: Stop pre-zeroing batch commands in arm_smmu_atc_inv_master()Zhen Lei
Pre-zeroing the batched commands structure is inefficient, as individual commands are zeroed later in arm_smmu_cmdq_build_cmd(). Therefore, only the member 'num' needs to be initialized to 0. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20210817113411.1962-1-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-04treewide: Replace the use of mem_encrypt_active() with cc_platform_has()Tom Lendacky
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with the CC_ATTR_MEM_ENCRYPT attribute. Remove the implementation of mem_encrypt_active() across all arches. For s390, since the default implementation of the cc_platform_has() matches the s390 implementation of mem_encrypt_active(), cc_platform_has() does not need to be implemented in s390 (the config option ARCH_HAS_CC_PLATFORM is not set). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
2021-10-04x86/sme: Replace occurrences of sme_active() with cc_platform_has()Tom Lendacky
Replace uses of sme_active() with the more generic cc_platform_has() using CC_ATTR_HOST_MEM_ENCRYPT. If future support is added for other memory encryption technologies, the use of CC_ATTR_HOST_MEM_ENCRYPT can be updated, as required. This also replaces two usages of sev_active() that are really geared towards detecting if SME is active. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-6-bp@alien8.de
2021-09-29iommu/amd: Use report_iommu_fault()Lennert Buytenhek
This patch makes iommu/amd call report_iommu_fault() when an I/O page fault occurs, which has two effects: 1) It allows device drivers to register a callback to be notified of I/O page faults, via the iommu_set_fault_handler() API. 2) It triggers the io_page_fault tracepoint in report_iommu_fault() when an I/O page fault occurs. The latter point is the main aim of this patch, as it allows rasdaemon-like daemons to be notified of I/O page faults, and to possibly initiate corrective action in response. A number of other IOMMU drivers already use report_iommu_fault(), and I/O page faults on those IOMMUs therefore already trigger this tracepoint -- but this isn't yet the case for AMD-Vi and Intel DMAR. The AMD IOMMU specification suggests that the bit in an I/O page fault event log entry that signals whether an I/O page fault was for a read request or for a write request is only meaningful when the faulting access was to a present page, but some testing on a Ryzen 3700X suggests that this bit encodes the correct value even for I/O page faults to non-present pages, and therefore, this patch passes the R/W information up the stack even for I/O page faults to non-present pages. Signed-off-by: Lennert Buytenhek <buytenh@arista.com> Link: https://lore.kernel.org/r/YVLyBW97vZLpOaAp@wantstofly.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Account for min_align_mask w/swiotlbDavid Stevens
Pass the non-aligned size to __iommu_dma_map when using swiotlb bounce buffers in iommu_dma_map_page, to account for min_align_mask. To deal with granule alignment, __iommu_dma_map maps iova_align(size + iova_off) bytes starting at phys - iova_off. If iommu_dma_map_page passes aligned size when using swiotlb, then this becomes iova_align(iova_align(orig_size) + iova_off). Normally iova_off will be zero when using swiotlb. However, this is not the case for devices that set min_align_mask. When iova_off is non-zero, __iommu_dma_map ends up mapping an extra page at the end of the buffer. Beyond just being a security issue, the extra page is not cleaned up by __iommu_dma_unmap. This causes problems when the IOVA is reused, due to collisions in the iommu driver. Just passing the original size is sufficient, since __iommu_dma_map will take care of granule alignment. Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask") Signed-off-by: David Stevens <stevensd@chromium.org> Link: https://lore.kernel.org/r/20210929023300.335969-8-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29swiotlb: Support aligned swiotlb buffersDavid Stevens
Add an argument to swiotlb_tbl_map_single that specifies the desired alignment of the allocated buffer. This is used by dma-iommu to ensure the buffer is aligned to the iova granule size when using swiotlb with untrusted sub-granule mappings. This addresses an issue where adjacent slots could be exposed to the untrusted device if IO_TLB_SIZE < iova granule < PAGE_SIZE. Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Check CONFIG_SWIOTLB more broadlyDavid Stevens
Introduce a new dev_use_swiotlb function to guard swiotlb code, instead of overloading dev_is_untrusted. This allows CONFIG_SWIOTLB to be checked more broadly, so the swiotlb related code can be removed more aggressively. Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929023300.335969-6-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Fold _swiotlb helpers into callersDavid Stevens
Fold the _swiotlb helper functions into the respective _page functions, since recent fixes have moved all logic from the _page functions to the _swiotlb functions. Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210929023300.335969-5-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Skip extra sync during unmap w/swiotlbDavid Stevens
Calling the iommu_dma_sync_*_for_cpu functions during unmap can cause two copies out of the swiotlb buffer. Do the arch sync directly in __iommu_dma_unmap_swiotlb instead to avoid this. This makes the call to iommu_dma_sync_sg_for_cpu for untrusted devices in iommu_dma_unmap_sg no longer necessary, so move that invocation later in the function. Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210929023300.335969-4-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Fix arch_sync_dma for mapDavid Stevens
When calling arch_sync_dma, we need to pass it the memory that's actually being used for dma. When using swiotlb bounce buffers, this is the bounce buffer. Move arch_sync_dma into the __iommu_dma_map_swiotlb helper, so it can use the bounce buffer address if necessary. Now that iommu_dma_map_sg delegates to a function which takes care of architectural syncing in the untrusted device case, the call to iommu_dma_sync_sg_for_device can be moved so it only occurs for trusted devices. Doing the sync for untrusted devices before mapping never really worked, since it needs to be able to target swiotlb buffers. This also moves the architectural sync to before the call to __iommu_dma_map, to guarantee that untrusted devices can't see stale data they shouldn't see. Fixes: 82612d66d51d ("iommu: Allow the iommu/dma api to use bounce buffers") Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210929023300.335969-3-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-29iommu/dma: Fix sync_sg with swiotlbDavid Stevens
The is_swiotlb_buffer function takes the physical address of the swiotlb buffer, not the physical address of the original buffer. The sglist contains the physical addresses of the original buffer, so for the sync_sg functions to work properly when a bounce buffer might have been used, we need to use iommu_iova_to_phys to look up the physical address. This is what sync_single does, so call that function on each sglist segment. The previous code mostly worked because swiotlb does the transfer on map and unmap. However, any callers which use DMA_ATTR_SKIP_CPU_SYNC with sglists or which call sync_sg would not have had anything copied to the bounce buffer. Fixes: 82612d66d51d ("iommu: Allow the iommu/dma api to use bounce buffers") Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929023300.335969-2-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/mediatek: Fix out-of-range warning with clangArnd Bergmann
clang-14 notices that a comparison is never true when CONFIG_PHYS_ADDR_T_64BIT is disabled: drivers/iommu/mtk_iommu.c:553:34: error: result of comparison of constant 5368709120 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (dom->data->enable_4GB && pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE) ~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add an explicit check for the type of the variable to skip the check and the warning in that case. Fixes: b4dad40e4f35 ("iommu/mediatek: Adjust the PA for the 4GB Mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210927121857.941160-1-arnd@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/dart: Clear sid2group entry when a group is freedSven Peter
sid2groups keeps track of which stream id combinations belong to a iommu_group to assign those correctly to devices. When a iommu_group is freed a stale pointer will however remain in sid2groups. This prevents devices with the same stream id combination to ever be attached again (see below). Fix that by creating a shadow copy of the stream id configuration when a group is allocated for the first time and clear the sid2group entry when that group is freed. # echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove pci 0000:03:00.0: Removing from iommu group 1 # echo 1 >/sys/bus/pci/rescan [...] pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref] pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref] tg3 0000:03:00.0: Failed to add to iommu group 1: -2 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Tested-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/ipmmu-vmsa: Hook up r8a77980 DT matching codeNikita Yushchenko
Add r8a77980 (R-Car V3H) to the list of supported devices. The hardware is the same as on already-supportred V3M and other R-Car Gen3 chips. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20210923191115.22864-1-nikita.yoush@cogentembedded.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/vt-d: Drop "0x" prefix from PCI bus & device addressesBjorn Helgaas
719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed the DMA fault reason from hex to decimal. It also added "0x" prefixes to the PCI bus/device, e.g., - DMAR: [INTR-REMAP] Request device [00:00.5] + DMAR: [INTR-REMAP] Request device [0x00:0x00.5] These no longer match dev_printk() and other similar messages in dmar_match_pci_path() and dmar_acpi_insert_dev_scope(). Drop the "0x" prefixes from the bus and device addresses. Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/dart: Remove iommu_flush_opsSven Peter
apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain but instead get a struct iommu_domain right now. This breaks those two functions and can lead to kernel panics like the one below. DART can only invalidate the entire TLB and apple_dart_iotlb_sync will already flush everything. There's no need to do that again inside those two functions. Let's just drop them. pci 0000:03:00.0: Removing from iommu group 1 Unable to handle kernel paging request at virtual address 0000000100000023 [...] Call trace: _raw_spin_lock_irqsave+0x54/0xbc apple_dart_hw_stream_command.constprop.0+0x2c/0x130 apple_dart_tlb_flush_all+0x48/0x90 free_io_pgtable_ops+0x40/0x70 apple_dart_domain_free+0x2c/0x44 iommu_group_release+0x68/0xac kobject_cleanup+0x4c/0x1fc kobject_cleanup+0x14c/0x1fc kobject_put+0x64/0x84 iommu_group_remove_device+0x110/0x180 iommu_release_device+0x50/0xa0 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/dma: Unexport IOVA cookie managementRobin Murphy
IOVA cookies are now got and put by core code, so we no longer need to export these to modular drivers. The export for getting MSI cookies stays, since VFIO can still be a module, but it was already relying on someone else putting them, so that aspect is unaffected. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ef89db54a27df7d8bc0af094c7d7b204fd61774c.1631531973.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/dart: Clean up IOVA cookie crumbsRobin Murphy
The addition of the DART driver crossed over with moving IOVA cookie management into core code; clean up the now-unnecessary remnants here. Acked-by: Sven Peter <sven@svenpeter.dev> Tested-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/edb72b4965baa8999dd70b8294785d6deebd4183.1631531973.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/ipmmu-vmsa: Add support for r8a779a0Yoshihiro Shimoda
Add support for r8a779a0 (R-Car V3U). The IPMMU hardware design of this SoC differs than others. So, add a new ipmmu_features for it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210907083020.907648-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-25iommu/amd: Use struct_group() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct ivhd_entry around members ext and hidh, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of ext. "pahole" shows no size nor member offset changes to struct ivhd_entry. "objdump -d" shows no object code changes. Cc: Will Deacon <will@kernel.org> Cc: iommu@lists.linux-foundation.org Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit (git 2.34.1) at 2024-05-10 17:42:05 +0000