summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-sun4i.c
AgeCommit message (Collapse)Author
2018-12-13irqchip/sun4i: Add support for Allwinner ARMv5 F1C100sMesih Kilinc
This patch adds support for suniv Allwinner ARMv5 F1C100s SoC which has stripped version of interrupt controller that found in A10/A13. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/sun4i: Move IC specific register offsets to structMesih Kilinc
This patch moves IC specific register offsets to sun4i_irq_chip_data struct in order to support different chips. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/sun4i: Add a struct to hold global variablesMesih Kilinc
In order to support different chips, IC specific data should be hold in a struct. This patch moves irq_base and irq_domain global variables to struct. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-23irqchip: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee@kernel.org> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-tegra@vger.kernel.org Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-02irqchip/sun4i: Fix compilation outside of arch/armAndre Przywara
The Allwinner sunxi specific interrupt controller cannot be compiled for any architecture except arm: drivers/irqchip/irq-sun4i.c:25:26: fatal error: asm/mach/irq.h: No such file or directory compilation terminated. It turns out that this header is actually not needed for the driver, so remove it and allow compilation for other architectures like arm64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1454348370-3816-2-git-send-email-andre.przywara@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16irqchip: Kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Link: http://lkml.kernel.org/r/1440889285-5637-3-git-send-email-robh@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11irqchip: Prepare for local stub header removalJoel Porquet
The IRQCHIP_DECLARE macro moved to to 'include/linux/irqchip.h', so the local irqchip.h became an empty shell, which solely includes include/linux/irqchip.h Include the global header in all irqchip drivers instead of the local header, so we can remove it. Signed-off-by: Joel Porquet <joel@porquet.org> Cc: vgupta@synopsys.com Cc: monstr@monstr.eu Cc: ralf@linux-mips.org Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1882096.X39jVG8e0D@joel-zenbook Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05irqchip: Constify irq_domain_opsKrzysztof Kozlowski
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kukjin Kim <kgene@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: http://lkml.kernel.org/r/1430139264-4362-2-git-send-email-k.kozlowski.k@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-03irqchip: sun4i: Convert to handle_domain_irqMarc Zyngier
Use the new handle_domain_irq method to handle interrupts. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1409047421-27649-14-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-19irqchip: sun4i: Simplify sun4i_irq_ackHans de Goede
Now that we only ack irq 0 the code can be simplified a lot. Also switch from read / modify / write to a simple write clear: 1) This is what the android code does (it has a hack for acking irq 0 in its unmask code doing this) 2) read / modify / write simply does not make sense for an irq status register like this, if the other bits are writeable (and the data sheet says they are not) they should be write 1 to clear, since otherwise a read / modify / write can race with a device raising an interrupt and then clear the pending bit unintentionally Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1394895894-8891-3-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-19irqchip: sun4i: Use handle_fasteoi_irq for all interruptsHans de Goede
Since the sun4i irq chip does not require any action and clears the interrupt when the level goes back to inactive, we don't need to mask / unmask for non oneshot IRQs, to achieve this we make sun4i_irq_ack a nop for all irqs except irq 0 and use handle_fasteoi_irq for all interrupts. Now there might be a case when the device reactivates the interrupt before the RETI. But that does not matter as we run the primary interrupt handlers with interrupts disabled. This also allows us to get rid of needing to use 2 irq_chip structs, this means that the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED will now influence all interrupts rather then just irq 0, but that does not matter as the eoi is now a nop anyways for all interrupts but irq 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1394895894-8891-2-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-14irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0Hans de Goede
All IRQs except for IRQ 0 seem to not need acking, so drop acking for them. The ENMI needs to have the ack done *after* clearing the interrupt source, otherwise we will get a spurious interrupt for each real interrupt. So use the new IRQCHIP_EOI_THREADED flag for this in combination with handle_fasteoi_irq. This uses a separate irq_chip struct for IRQ 0, since we only want this behavior for IRQ 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1394733834-26839-5-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-14irqchip: sun4i: Fix a comment about mask register initializationHans de Goede
The comment was claiming that we were masking all irqs, while the code actually *un*masks all of them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1394733834-26839-4-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-14irqchip: sun4i: Fix irq 0 not workingHans de Goede
SUN4I_IRQ_VECTOR_REG containing 0 can mean one of 3 things: 1) no more irqs pending 2) irq 0 pending 3) spurious irq So if we immediately get a reading of 0, check the irq-pending reg to differentiate between 2 and 3. We only do this once to avoid the extra check in the common case of 1) hapening after having read the vector-reg once. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1394733834-26839-3-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-14irqchip: sunxi: Change compatiblesMaxime Ripard
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the irq controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-12irqchip: Remove asmlinkage from static functionsStephen Boyd
LTO patches add __visible to the asmlinkage define, causing compilation warnings like: drivers/irqchip/irq-gic.c:283:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] Drop asmlinkage here to avoid such warnings. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: khilman@linaro.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1393980030-17770-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-05irqchip: sun4i: Staticize sun4i_irq_ack()Axel Lin
sun4i_irq_ack() is only referenced in this file, so make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1373010070.14756.2.camel@phoenix Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08irqchip: sunxi: Rename sunxi to sun4iMaxime Ripard
During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that looks pretty much the same, but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>