summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)Author
2015-11-17irqchip/gic: Add save/restore of the active stateMarc Zyngier
When using EOImode==1, we may mark interrupts as being forwarded to a virtual machine. In that case, the interrupt is left active while being passed to the VM. If we suspend the system before the VM has deactivated the interrupt, the active state will be lost (which may be very annoying, as this may result in spurious interrupts and a confused guest). To avoid this, save and restore the active state together with the rest of the GIC registers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/1447701208-18150-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-17irqchip/gic: Clear enable bits before restoring themMarc Zyngier
When restoring the GIC state (after a suspend/resume cycle, for example), the driver directly writes the 'enabled' state it has saved by accessing GICD_ISENABLERn, which performs an OR operation between the value present in the register and the value we write. If whatever code that has run before we reentered the kernel has enabled an interrupt that was previously disabled, we won't restore that disabled state. Making sure we first clear the register (by writting to GICD_ICENABLERn) before restoring the enabled state. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/1447701208-18150-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-17irqchip/gic: Make sure all interrupts are deactivated at bootMarc Zyngier
When booting a GIC/GICv3 based system, we have no idea what state the firmware (or previous kernel in the case of kexec) has left the GIC, and some interrupts may still be active. In order to garantee that we have a clean state, make sure the active bits are cleared at init time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/1447701208-18150-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
2015-11-11irqchip: irq-mips-gic: Provide function to map GIC user sectionAlex Smith
The GIC provides a "user-mode visible" section containing a mirror of the counter registers which can be mapped into user memory. This will be used by the VDSO time function implementations, so provide a function to map it in. When the GIC is not enabled in Kconfig a dummy inline version of this function is provided, along with "#define gic_present 0", so that we don't have to litter the VDSO code with ifdefs. [markos.chandras@imgtec.com: - Move mapping code to arch/mips/kernel/vdso.c and use a resource type to get the GIC usermode information - Avoid renaming function arguments and use __gic_base_addr to hold the base GIC address prior to ioremap.] [ralf@linux-mips.org: Fix up gic_get_usm_range() to compile and make inline again.] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/11281/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
2015-11-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
2015-10-26irqchip/tegra: Propagate IRQ type setting to parentLucas Stach
The LIC doesn't deal with the different types of interrupts itself but needs to forward calls to set the appropriate type to its parent IRQ controller. Without this fix all IRQs routed through the LIC will stay at the initial EDGE type, while most of them should actually be level triggered. Fixes: 1eec582158e2 "irqchip: tegra: Add Tegra210 support" Signed-off-by: Lucas Stach <dev@lynxeye.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: <stable@vger.kernel.org> # 4.1 Link: http://lkml.kernel.org/r/1445787552-13062-1-git-send-email-dev@lynxeye.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-26irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOENThomas Petazzoni
Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change causes a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit works around this problem by clearing again the IRQ_NOAUTOEN flags, so that we are back to the situation we had before commit d17cab4451df1. This work around is proposed as a minimal fix for the problem, while a better long-term solution is being worked on. Fixes: d17cab4451df1 "irqchip: Kill off set_irq_flags usage" Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1445435295-19956-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-25Merge branch 'acpi-init'Rafael J. Wysocki
* acpi-init: clocksource: cosmetic: Drop OF 'dependency' from symbols clocksource / arm_arch_timer: Convert to ACPI probing clocksource: Add new CLKSRC_{PROBE,ACPI} config symbols clocksource / ACPI: Add probing infrastructure for ACPI-based clocksources irqchip / GIC: Convert the GIC driver to ACPI probing irqchip / ACPI: Add probing infrastructure for ACPI-based irqchips ACPI: Add early device probing infrastructure
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16irqchip/gic-v3-its: Parse new version of msi-parent propertyMarc Zyngier
Now that 126b16e2ad98 ("Docs: dt: add generic MSI bindings") has made it into the tree, the time has come to get rid of the old hack, and to parse msi-parent in its full glory. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-16irqchip/gic-v3-its: Add handling of PCI requester id.David Daney
Replace open coded generation PCI/MSI requester id with call to the new function pci_msi_domain_get_msi_rid() which applies the "msi-map" to the id value. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-15irqchip/gic-v2m: Add support for multiple MSI framesMarc Zyngier
The GICv2m driver is so far limited to a single MSI frame, but nothing prevents an implementation from having several of them. This patch expands the driver to enumerate all frames, keeping the first one as the canonical identifier for the MSI domains. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Duc Dang <dhdang@apm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1444822037-16983-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspecMarc Zyngier
Commit f833f57ff254 ("irqchip: Convert all alloc/xlate users from of_node to fwnode") converted the GICv3 driver to using irq_fwspec as part of its 'translate' method. Too bad it ended up with a copy of the GICv2 'translate' method, which screws up LPI translation (by not translating them at all). Restore the code in its original shape, and just change what is really required... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Duc Dang <dhdang@apm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1444822037-16983-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-14irqchip/mxs: Add Alphascale ASM9260 supportOleksij Rempel
Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. We already prepared the mxs driver to handle a different register layout. Add the actual ASM9260 support. Differences between these devices: - Different register offsets - Different count of interupt lines per register - ASM9260 does not provide reset bit - ASM9260 does not support FIQ. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-14irqchip/mxs: Prepare driver for hardware with different offsetsOleksij Rempel
Alphascale asm9260 has similar functionality but different register offsets. To support asm9260 in the mxs driver we need to rework the hardcoded access mechanisms. - Define SET_REG and CLR_REG. These controllers support seperate CLR and SET offsets for each register. - Reimplement HW_ICOLL_INTERRUPT with SET_REG and CLR_REG to make it usable for both cases. - Instead of using icoll_base and adding the offsets at runtime, create a new data structure which contains base pointers to all required regitsters and use it. - Split out functionality, which is required for the init code of mxs and asm9260, into helper functions [ tglx: Massaged changelog and moved the return value change to the previous patch ] Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-5-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-14irqchip/mxs: Panic if ioremap or domain creation failsOleksij Rempel
Current code will only warn and then dereference the NULL pointer or continue, which results in a fatal NULL pointer dereference later. If the initialization fails, the machine is unusable, so panic right away. [ tglx: Massaged changelog and picked the irqdomain panic from the next patch] Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-2-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain/msi: Use fwnode instead of of_nodeMarc Zyngier
As we continue to push of_node towards the outskirts of irq domains, let's start tackling the case of msi_create_irq_domain and its little friends. This has limited impact in both PCI/MSI, platform MSI, and a few drivers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqchip/gic: Kill the xlate methodMarc Zyngier
We are now left with only two use models for the GIC driver: - Via a firmware interface, which mandates a hierarchical domain, and the use of the 'translate' method - The legacy platforms, which assume irq==hwirq, hence not using the 'xlate' method. The logical conclusion is that we can now nuke the 'xlate' method altogether. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-14-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqchip/gic: Switch ACPI support to stacked domainsMarc Zyngier
Now that the basic ACPI GSI code is irq domain aware, make sure that the ACPI support in the GIC doesn't pointlessly deviate from the DT path. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-13-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqchip/gic: Get rid of gic_init_bases()Marc Zyngier
Since nobody is using gic_init_bases anymore outside of the GIC driver itself, let's do a bit of housekeeping and remove the now useless entry point. Only gic_init() is now exposed to the rest of the kernel for the benefit of legacy systems. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-12-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqchip: Convert all alloc/xlate users from of_node to fwnodeMarc Zyngier
Since we now have a generic data structure to express an interrupt specifier, convert all hierarchical irqchips that are OF based to use a fwnode_handle as part of their alloc and xlate (which becomes translate) callbacks. As most of these drivers have dependencies (they exchange IRQ specifiers), change them all in a single, massive patch... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-6-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Use irq_domain_get_of_node() instead of direct field accessMarc Zyngier
The struct irq_domain contains a "struct device_node *" field (of_node) that is almost the only link between the irqdomain and the device tree infrastructure. In order to prepare for the removal of that field, convert all users to use irq_domain_get_of_node() instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13Merge branch 'linus' into irq/coreThomas Gleixner
Bring in upstream updates for patches which depend on them
2015-10-09irqchip/gic-v3: Specialize readq and writeq accessesJean-Philippe Brucker
On 32bit platforms, we cannot assure that an I/O ldrd or strd will be done atomically. Besides, an hypervisor would be unable to emulate such accesses. In order to allow the AArch32 version of the driver to split them into two 32bit accesses while keeping the requirement for atomic writes, this patch specializes the IROUTER and TYPER accesses. Since the latter is an ID register, it won't need to be read atomically, but we still avoid future confusion by using gic_read_typer instead of a generic gic_readq. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/gic-v3: Change unsigned types for AArch32 compatibilityJean-Philippe Brucker
This patch does a few simple compatibility-related changes: - change the system register access prototypes to their actual size, - homogenise mpidr accesses with unsigned long, - force the 64bit register values to unsigned long long. Note: the list registers are 64bit on GICv3, but the AArch32 vGIC driver will need to split their values into two 32bit registers: LRn and LRCn. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/gic-v3: Refactor the arm64 specific partsJean-Philippe Brucker
This patch moves the GICv3 system register access helpers to arch/arm64/. Their 32bit counterparts will need to use mrc/mcr accesses instead of mrs_s/msr_s. [maz: fixed conflict with Cavium erratum handling] Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/gic-v2m: Add workaround for APM X-Gene GICv2m erratumDuc Dang
APM X-Gene GICv2m implementation has an erratum where the MSI data needs to be the offset from the spi_start in order to trigger the correct MSI interrupt. This is different from the standard GICv2m implementation where the MSI data is the absolute value within the range from spi_start to (spi_start + num_spis) of each v2m frame. This patch reads MSI_IIDR register (present in all GICv2m implementations) to identify X-Gene GICv2m implementation and apply workaround to change the data portion of MSI vector. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/gic: Warn if GICv3 system registers are enabledMarc Zyngier
When using a GICv3 in compatibility (v2) mode, having GICv3 system register access enabled is not really compliant with the architecture. Warn if the firmware (or the hypervisor) has been lazy. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/gic-v3: Make gic_enable_sre an inline functionMarc Zyngier
In order for gic_enable_sre to be used by the arm64 core code, move it to arm-gic-v3.h. As a bonus, we now also check if system registers have been already enabled, and return early if they have. In all cases, the function now returns a boolean indicating if the enabling has been successful. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-09irqchip/sunxi-nmi: Switch to of_io_request_and_map() from of_iomap()Chen-Yu Tsai
Switch to the new of_io_request_and_map() call, so the IO resource is properly held, and also shows up in /proc/iomem. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1444063334-19832-3-git-send-email-wens@csie.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09irqchip/sunxi-nmi: Use driver name instead of DT node name for identificationChen-Yu Tsai
The device tree node name is typically "interrupt-controller", which is rather useless when used in printk messages and irq chip names for identification purposes. Use the driver name "sunxi-nmi" instead. While at it move the identifier from pr_err() calls to the pr_fmt macro. Also remove the "__func__" identifier from the error message in the interrupt type setting callback, sunxi_sc_nmi_set_type(). The driver name in the pr_fmt macro should be enough. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1444063334-19832-2-git-send-email-wens@csie.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This update contains: - Fix for a long standing race affecting /proc/irq/NNN - One line fix for ARM GICV3-ITS counting the wrong data - Warning silencing in ARM GICV3-ITS. Another GCC trying to be overly clever issue" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Count additional LPIs for the aliased devices irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined genirq: Fix race in register_irq_proc()
2015-10-02irqchip/gic-v3-its: Count additional LPIs for the aliased devicesMarc Zyngier
When configuring the interrupt mapping for a new device, we iterate over all the possible aliases to account for their maximum MSI allocation. This was introduced by e8137f4f5088 ("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration"). Turns out that the code doing that is a bit braindead, and repeatedly accounts for the same device over and over. Fix this by counting the actual alias that is passed to us by the core code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlinedMarc Zyngier
More agressive inlining in recent versions of GCC have uncovered a new set of warnings: drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare: drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.lpi_base = lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here int lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.nr_lpis = nr_lpis; ^ drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here int nr_lpis; ^ The warning is fairly benign (there is no code path that could actually use uninitialized variables), but let's silence it anyway by zeroing the variables on the error path. Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01irqchip/i8259: Convert to use irq_set_chained_handler_and_dataAxel Lin
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1443709604.12993.0.camel@ingics.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-01irqchip / GIC: Convert the GIC driver to ACPI probingMarc Zyngier
Now that we have a basic infrastructure to register irqchips and call them on discovery of a matching entry in MADT, convert the GIC driver to this new probing method. It ends up being a code deletion party, which is a rather good thing. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-01irqchip / ACPI: Add probing infrastructure for ACPI-based irqchipsMarc Zyngier
DT enjoys a rather nice probing infrastructure for irqchips, while ACPI is so far stuck into a very distant past. This patch introduces a declarative API, allowing irqchips to be self-contained and be called when a particular entry is matched in the MADT table. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-30irqchip/renesas-intc-irqpin: r8a7778 IRLM setup supportUlrich Hecht
Works the same as on r8a7779. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1443607387-19147-1-git-send-email-geert+Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip: armada-370-xp: Rework per-cpu interrupts handlingMaxime Ripard
The MPIC driver currently has a list of interrupts to handle as per-cpu. Since the timer, fabric and neta interrupts were the only per-cpu interrupts in the system, we can now remove the switch and just check for the hardware irq number to determine whether a given interrupt is per-cpu or not. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29irqchip/renesas-irqc: Move over to nested generic chipMagnus Damm
Convert the IRQC driver to rely on GENERIC_IRQ_CHIP and set IRQ_GC_INIT_NESTED_LOCK to enable nested locking. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: jason@lakedaemon.net Cc: geert+renesas@glider.be Cc: horms@verge.net.au Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20150928094237.32552.83434.sendpatchset@little-apple Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Use new jump label APIRobert Richter
Use newly introduced jump label API. Make this a separate patch for easier backporting to older kernels of the errata patch set. Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-7-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Workaround for Cavium ThunderX errata 22375, 24313Robert Richter
This implements two gicv3-its errata workarounds for ThunderX. Both with small impact affecting only ITS table allocation. erratum 22375: only alloc 8MB table size erratum 24313: ignore memory access type The fixes are in ITS initialization and basically ignore memory access type and table size provided by the TYPER and BASER registers. Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1442869119-1814-6-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Add HW revision detection and configurationRobert Richter
Some GIC revisions require an individual configuration to esp. add workarounds for HW bugs. This patch implements generic code to parse the hw revision provided by an IIDR register value and runs specific code if hw matches. A function is added that reads the IIDR registers for ITS (GITS_IIDR) and then goes through a list of init functions to be called for specific versions. Same could be done for GICV3 (GICD_IIDR), but there are no users yet for it. The patch is needed to implement workarounds for HW errata in Cavium's ThunderX GICV3 ITS. Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-5-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Read typer register outside the loopRobert Richter
No need to read the typer register in the loop. Values do not change. This patch is basically a prerequisite for a follow-on patch that adds errata code for Cavium ThunderX. It moves the calculation of the number of id entries to the beginning of the function close to other setup values that are needed to allocate the its table. Now we have a central location to modify the setup parameters and the errata code can be implemented in a single block. Signed-off-by: Robert Richter <rrichter@cavium.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-4-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3: Workaround for Cavium ThunderX erratum 23154Robert Richter
This patch implements Cavium ThunderX erratum 23154. The gicv3 of ThunderX requires a modified version for reading the IAR status to ensure data synchronization. Since this is in the fast-path and called with each interrupt, runtime patching is used using jump label patching for smallest overhead (no-op). This is the same technique as used for tracepoints. Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1442869119-1814-3-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Add range check for number of allocated pagesRobert Richter
The number of pages for the its table may exceed the maximum of 256. Adding a range check and limitting the number to its maximum. Based on a patch from Tirumalesh Chalamarla <tchalamarla@cavium.com>. Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-2-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>