Age | Commit message (Collapse) | Author |
|
On some SoCs the System CIRQ register layout is slightly different,
as there are more registers per function and in some cases other
differences later in the layout: this is seen on at least MT8192,
but it's also valid for some other "contemporary" SoCs both for
Chromebooks and for smartphones.
Add the new "v2" register layout and use it if the compatible
"mediatek,mt8192-cirq" is found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-5-angelogioacchino.delregno@collabora.com
|
|
In preparation to add support for new SoCs having a different
register layout, add an enumeration that documents register
offsets and move the definitions for the same to a u32 array;
Selecting the right register offsets array is done by adding an
of_device_id array containing all of the currently supported
compatible strings pointing to the "v1" offsets array (as data):
since no devicetree declares the `mediatek,mtk-cirq` compatible
without a SoC-specific one, it wasn't necessary to provide any
legacy fallback.
Every usage of the aforemementioned definitions was changed to
get a register address through a newly introduced `mtk_cirq_reg()`
accessor.
This change brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-4-angelogioacchino.delregno@collabora.com
|
|
The PLIC does not define any special method for marking interrupts as
wakeup-capable, so it should have the IRQCHIP_SKIP_SET_WAKE flag set.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221126194805.19431-1-samuel@sholland.org
|
|
For cores less than 4, eg, loongson2k1000 with 2 cores, the
of_property_match_string() may return with an error value,
which causes that liointc could not work. At least isr0 is
what should be checked like previous commit b2c4c3969fd7
("irqchip/loongson-liointc: irqchip add 2.0 version") did.
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104110712.23300-1-liupeibao@loongson.cn
|
|
Remove use of the deprecated mask_invert flag. Inverted mask
registers (where a '1' bit enables an IRQ) can be described more
directly as an unmask register.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221112152701.41990-1-aidanmacdonald.0x0@gmail.com
|
|
If of_iomap() failed, 'aic' should be freed before return. Otherwise
there is a memory leak.
Fixes: fead4dd49663 ("irqchip: Add driver for WPCM450 interrupt controller")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115092532.1704032-1-weiyongjun@huaweicloud.com
|
|
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/202211171916504943604@zte.com.cn
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Talel Shenhar <talel@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221121161622.6294a899@endymion.delvare
|
|
gic_probe() calls pm_runtime_get_sync() and added fail path as
rpm_put to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com
|
|
Delete the redundant word 'the'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022054655.36496-1-wangjianli@cdjrlc.com
|
|
These structs hold information used only at init time that never
gets modified, hence mark them __initconst.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221021235523.76585-1-konrad.dybcio@somainline.org
|
|
Add suspend/resume support for PCH-LPC irqchip, which is needed for
upcoming suspend/hibernation.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020073527.541845-5-chenhuacai@loongson.cn
|
|
Add suspend/resume support for PCH-PIC irqchip, which is needed for
upcoming suspend/hibernation.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020073527.541845-4-chenhuacai@loongson.cn
|
|
Add suspend/resume support for EIOINTC irqchip, which is needed for
upcoming suspend/hibernation.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020073527.541845-3-chenhuacai@loongson.cn
|
|
Add suspend/resume support for HTVEC irqchip, which is needed for
upcoming suspend/hibernation.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020073527.541845-2-chenhuacai@loongson.cn
|
|
HTVECINTC stands for "HyperTransport Interrupts" that described in
Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Though the extended model is the recommended one, there are still some
legacy model machines. So we add ACPI init support for HTVECINTC.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn
|
|
For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored
the IRQ type in intspec[1]. For supporting to set type for
IRQs of the irqdomain, intspec[1] should be used to get IRQ
type.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-5-lvjianmin@loongson.cn
|
|
For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
the IRQ type in fwspec->param[1]. For supporting to set type for
IRQs of the irqdomain, fwspec->param[1] should be used to get IRQ
type.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-4-lvjianmin@loongson.cn
|
|
In DT path of translate callback, if fwspec->param_count==1
and of_node is non-null, fwspec->param[1] will be accessed,
which is introduced from previous commit bcdd75c596c8
(irqchip/loongson-pch-pic: Add ACPI init support).
Before the patch, for non-null of_node, translate callback
(use irq_domain_translate_twocell()) will return -EINVAL if
fwspec->param_count < 2, so the check in the patch is added.
Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support")
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-3-lvjianmin@loongson.cn
|
|
LoongArch is coming to support booting with FDT, so DT
support of this driver is desired.
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221114113824.1880-2-liupeibao@loongson.cn
|
|
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
|
|
The Freescale/NXP i.MX Messaging Unit is only present on Freescale/NXP
i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the
user about this driver when configuring a kernel without Freescale/NXP
i.MX SoC family support.
While at it, expand "MU" to "Messaging Unit" in the help text.
Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/7f3bd932614ddbff46a1b750ef45b231130364ad.1664900434.git.geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
|
|
Offset 0x124 should be for IMX_MU_TSR, not IMX_MU_GSR.
Fixes: 70afdab904d2 ("irqchip: Add IMX MU MSI controller driver")
Reported-by: Colin King <colin.i.king@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: updated commit message, tags]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221004202414.216577-1-Frank.Li@nxp.com
|
|
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The ls-extirq implementation, ls_extirq_irq_set_type(), uses an MMIO
regmap created by of_syscon_register(), which uses plain spinlocks
(the kind that are sleepable on RT).
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Make this driver ioremap its INTPCR register on its own, and stop
relying on syscon to provide a regmap.
Fixes: 0dcd9f872769 ("irqchip: Add support for Layerscape external interrupt lines")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[maz: trimmed down commit log]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220728144254.175385-1-vladimir.oltean@nxp.com
|
|
* irq/misc-6.1:
: .
: Misc irqchip updates for 6.1:
:
: - Allow generic irqchip support without selecting CONFIG_OF_IRQ
:
: - Fix a couple of bindings for TI interrupts controllers
:
: - Yet another binding update for a Renesas SoC
:
: - The obligatory fixes from the spelling police
: .
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Make irqchip_init() usable on pure ACPI systems
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/rtl-imap-deprecation:
: .
: Deprecate interrupt-map property for realtek-rtl irqchip
:
: Patches from Sander Vanheule.
: .
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The MU block found in a number of Freescale/NXP SoCs supports generating
IRQs by writing data to a register.
This enables the MU block to be used as a MSI controller, by leveraging
the platform-MSI API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: dropped pointless dma-iommu.h and of_pci.h includes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-4-Frank.Li@nxp.com
|
|
Fix typo in comment (cleanip/cleanup).
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1664332767-6909-1-git-send-email-daizhiyuan@phytium.com.cn
|
|
The interrupt-map property for "realtek,rtl-intc" has been deprecated in
favor of a list of parent interrupts. Drop the open-coded parser for
interrupt-map, and use the first parent interrupt instead. If no parent
was provided, the driver will assume that this is the first hardware
interrupt of the SoC's MIPS CPU for compatibility with the legacy binding.
All SoC interrupts were treated equally, independent of which output
they were actually routed to. This means the driver might as well route
all interrupts to the first output, and achieve the same behaviour.
Without the interrupt-map property, interrupt usage information is no
longer available at initialisation. Routing setup will now happen later,
when a hardware interrupt is mapped by the subsystem.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5f901a82eaa9d97cadf6e9b73a894a92f3f83b7c.1663617425.git.sander@svanheule.net
|
|
When using an offset of 0, irq_domain_add_simple() is identical to
irq_domain_add_linear() on DT-based systems, so use the latter instead.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/0c4cd9f7661a30a4cb7ab9881c4a94bc8a379162.1663617425.git.sander@svanheule.net
|
|
Pure ACPI systems (e.g., LoongArch) do not need OF_IRQ, but still
require irqchip_init() to perform the ACPI irqchip probing,
even when OF_IRQ isn't selected.
Relax the dependency to enable the generic irqchip support when
ACPI_GENERIC_GSI is configured.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
[maz: revamped commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220927124557.3246737-1-chenhuacai@loongson.cn
|
|
The loongson-pch-lpc driver may be selected in a random
configuration, but it is only supported for LoongArch, So,
the dependence on LoongArch is added for it to avoid compile
error for a random configuration of other architetures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220916071926.28368-1-lvjianmin@loongson.cn
|
|
LoongArch irqchips have a fixed hierarchy which currently can't be
described by ACPI tables, so upstream irqchip drivers call downstream
irqchip drivers' initialization directly. As a result, the top level
(CPU-level) irqchip driver should explicitly select downstream drivers
to avoid build errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220808085319.3350111-1-chenhuacai@loongson.cn
|
|
Running a PREEMPT_RT kernel based on v5.19-rc3-rt4 on an Ampere Altra
triggers:
[ 22.616229] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
[ 22.616239] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1884, name: kworker/80:1
[ 22.616243] preempt_count: 3, expected: 0
[ 22.616244] RCU nest depth: 0, expected: 0
[...]
[ 22.616250] hardirqs last enabled at (33): _raw_spin_unlock_irq (/home/piegon01/linux/./arch/arm64/include/asm/irqflags.h:35)
[ 22.616273] hardirqs last disabled at (34): __schedule (/home/piegon01/linux/kernel/sched/core.c:6432 (discriminator 1))
[ 22.616283] softirqs last enabled at (0): copy_process (/home/piegon01/linux/./include/linux/lockdep.h:191)
[ 22.616297] softirqs last disabled at (0): 0x0
[ 22.616305] Preemption disabled at:
[ 22.616307] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1612)
[ 22.616322] CPU: 80 PID: 1884 Comm: kworker/80:1 Tainted: G W [...]
[ 22.616328] Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
[ 22.616333] Workqueue: events work_for_cpu_fn
[ 22.616344] Call trace:
[...]
[ 22.616403] alloc_cpumask_var_node (/home/piegon01/linux/lib/cpumask.c:115)
[ 22.616414] alloc_cpumask_var (/home/piegon01/linux/lib/cpumask.c:147)
[ 22.616417] its_select_cpu (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1580)
[ 22.616428] its_set_affinity (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1659)
[ 22.616431] msi_domain_set_affinity (/home/piegon01/linux/kernel/irq/msi.c:501)
[ 22.616440] irq_do_set_affinity (/home/piegon01/linux/kernel/irq/manage.c:276)
[ 22.616443] irq_setup_affinity (/home/piegon01/linux/kernel/irq/manage.c:633)
[ 22.616447] irq_startup (/home/piegon01/linux/kernel/irq/chip.c:280)
[ 22.616453] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1777)
Follow the pattern established in commit cba4235e6031e ("genirq: Remove
mask argument from setup_affinity()") and co to overcome this issue by
defining a static struct cpumask and protecting it by a raw spinlock.
Since its_select_cpu() can be executed with IRQs enabled or disabled,
enforce that the cpumask computation is done with interrupts disabled.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220912141857.1391343-1-pierre.gondois@arm.com
|
|
The field drv_data is assigned during driver's probe, where it's
already checked to be not NULL.
Remove the always false check '!host_data->drv_data'.
This fixes a warning "variable dereferenced before check" detected
by '0-DAY CI Kernel Test Service'.
Fixes: c297493336b7 ("irqchip/stm32-exti: Simplify irq description table")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/lkml/202208131739.gJvcs9ls-lkp@intel.com/
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220817125758.5975-1-antonio.borneo@foss.st.com
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64PFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The iommu-dma layer is now mostly encapsulated by iommu_dma_ops, with
only a couple more public interfaces left pertaining to MSI integration.
Since these depend on the main IOMMU API header anyway, move their
declarations there, taking the opportunity to update the half-baked
comments to proper kerneldoc along the way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9cd99738f52094e6bed44bfee03fa4f288d20695.1660668998.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- A bunch of small fixes for the recently merged LoongArch drivers
- A leftover from the non-SMP IRQ affinity rework affecting
the Hyper-V IOMMU code
Link: https://lore.kernel.org/r/20220812125910.2227338-1-maz@kernel.org
|
|
All errors lead to the error handling path, except the one dealing
with "reg-names" in DT.
Fix it and release some resources before returning if this test fails.
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[maz: fix commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1a6d74ab70712279023aa7bdbd31bd3aec103bc0.1659382063.git.christophe.jaillet@wanadoo.fr
|
|
The recently merged LoongArch drivers paper over the lack of
topology information by creating a bunch of fwnodes for the
irqchips. So far, so good.
However, irq_domain_alloc_fwnode() is supposed to take a PA, and
not a kernel VA blindly cast as a PA, potentially disclosing
kernel VAs to userspace. In some other cases, even NULL is used
as the PA, which is entertaining.
Fix this by using the actual PA of the block when available,
and switch to a named fwnode in the other cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Link: https://lore.kernel.org/r/20220808105020.2689757-1-maz@kernel.org
|
|
MIPS doesn't declare find_pch_pic(), which makes a build warning:
>> drivers/irqchip/irq-loongson-pch-pic.c:51:5: warning: no previous prototype for function 'find_pch_pic' [-Wmissing-prototypes]
int find_pch_pic(u32 gsi)
^
drivers/irqchip/irq-loongson-pch-pic.c:51:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int find_pch_pic(u32 gsi)
^
static
1 warning generated.
Move find_pch_pic() into CONFIG_ACPI which only used by LoongArch to fix
the warning.
BTW, remove the duplicated declaration of find_pch_pic() in irq.h.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220808093205.3658485-1-chenhuacai@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
|
|
Make acpi_get_vec_parent() be a static function, to avoid:
drivers/irqchip/irq-loongson-eiointc.c:289:20: warning: no previous prototype for 'acpi_get_vec_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220804025457.213979-1-chenhuacai@loongson.cn
|
|
In multi-node case, csr_any_send() should set EIOINTC_REG_ENABLE of
the first core of target node, not the first core of the whole.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220804025421.211958-1-chenhuacai@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
|