summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2021-02-14leds: rt8515: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann
The leds-rt8515 driver can optionall use the v4l2 flash led class, but it causes a link error when that class is in a loadable module and the rt8515 driver itself is built-in: ld.lld: error: undefined symbol: v4l2_flash_init >>> referenced by leds-rt8515.c >>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive drivers/built-in.a Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that, but it would make it impossible to use the driver without the v4l2 support. Add the same dependency that the other users of this class have instead, which just prevents the broken configuration. Fixes: e1c6edcbea13 ("leds: rt8515: Add Richtek RT8515 LED driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: rt8515: Add Richtek RT8515 LED driverLinus Walleij
This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: linux-media@vger.kernel.org Cc: phone-devel@vger.kernel.org Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: trigger: fix potential deadlock with libataAndrea Righi
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188611f0 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-ariel: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-lm3533: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: turris-omnia: check for LED_COLOR_ID_RGB instead LED_COLOR_ID_MULTIMarek Behún
LED core does not allow LED_COLOR_ID_MULTI for now and instead for RGB LEDs prefers LED_COLOR_ID_RGB. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now") Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: turris-omnia: fix checkpatch warningMarek Behún
Use kstrtoul instead of sscanf to satisfy checkpatch. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: turris-omnia: wrap to 80 columnsMarek Behún
Although checkpatch changed the max-line-length default to 100 columns, we still prefer 80 columns somewhere. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: turris-omnia: use constants instead of macros for color commandMarek Behún
Use integer constants directly when building I2C messages for LED color change command, instead of macros. The command is simple enough to understand what is going on even without these names. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: lp50xx: Fix an error handling path in 'lp50xx_probe_dt()'Christophe JAILLET
In case of memory allocation failure, we must release some resources as done in all other error handling paths of the function. 'goto child_out' instead of a direct return so that 'fwnode_handle_put()' is called when we break out of a 'device_for_each_child_node' loop. Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-11-25leds: netxbig: add missing put_device() call in netxbig_leds_get_of_pdata()Yu Kuai
if of_find_device_by_node() succeed, netxbig_leds_get_of_pdata() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 2976b1798909 ("leds: netxbig: add device tree binding") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-10-07leds: pwm: Remove platform_data supportAlexander Dahl
Since commit 141f15c66d94 ("leds: pwm: remove header") that platform interface is not usable from outside and there seems to be no in tree user anymore. All in-tree users of the leds-pwm driver seem to use DT currently. Getting rid of the old platform interface allows the leds-pwm driver to switch over from 'devm_led_classdev_register()' to 'devm_led_classdev_register_ext()'. Signed-off-by: Alexander Dahl <post@lespocky.de> Cc: Denis Osterland-Heim <denis.osterland@diehl.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-10-05leds: lm3697: Fix out-of-bound accessGabriel David
If both LED banks aren't used in device tree, an out-of-bounds condition in lm3697_init occurs because of the for loop assuming that all the banks are used. Fix it by adding a variable that contains the number of used banks. Signed-off-by: Gabriel David <ultracoolguy@tutanota.com> [removed extra rename, minor tweaks] Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: stable@kernel.org
2020-09-30leds: ns2: do not guard OF match pointer with of_match_ptrMarek Behún
Do not match OF match pointer with of_match_ptr, so that even if CONFIG_OF is disabled, the driver can still be bound via another method. Move definition of of_ns2_leds_match just before ns2_led_driver definition, since it is not needed sooner. Signed-off-by: Marek Behún <kabel@kernel.org> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: ns2: convert to fwnode APIMarek Behún
Convert from OF api to fwnode API, so that it is possible to bind this driver without device-tree. The fwnode API does not expose a function to read a specific element of an array. We therefore change the types of the ns2_led_modval structure so that we can read the whole modval array with one fwnode call. Signed-off-by: Marek Behún <kabel@kernel.org> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tlc591xx: fix leak of device node iteratorTobias Jordan
In one of the error paths of the for_each_child_of_node loop in tlc591xx_probe, add missing call to of_node_put. Fixes: 1ab4531ad132 ("leds: tlc591xx: simplify driver by using the managed led API") Signed-off-by: Tobias Jordan <kernel@cdqe.de> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: use struct led_init_data when registeringMarek Behún
By using struct led_init_data when registering we do not need to parse `label` DT property. Moreover `label` is deprecated and if it is not present but `color` and `function` are, LED core will compose a name from these properties instead. Previously if the `label` DT property was not present, the code composed name for the LED in the form "pca963x:%d:%.2x:%u" For backwards compatibility we therefore set init_data->default_label to this value so that the LED will not get a different name if `label` property is not present, nor are `color` and `function`. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: register LEDs immediately after parsing, get rid of platdataMarek Behún
Register LEDs immediately after parsing their properties. This allows us to get rid of platdata, and since no one in tree uses header linux/platform_data/leds-pca963x.h, remove it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: remove binding commentMarek Behún
Remove the binding comment at the beginning. The information for platdata is now obsolete and DT binding is documented in device-tree bindings. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: NeilBrown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: cosmetic change: use helper variableMarek Behún
Use helper variable dev instead of always writing &client->dev. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: NeilBrown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: do not set GPIO namesMarek Behún
Do not set GPIO names. Let gpiolib determine GPIO names from the DT property `gpio-line-names`. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: NeilBrown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30ledtrig-cpu: Limit to 8 CPUsPavel Machek
Some machines have thousands of CPUs... and trigger mechanisms was not really meant for thousands of triggers. I doubt anyone uses this trigger on many-CPU machine; but if they do, they'll need to do it properly. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: TODO: Add documentation about possible subsystem improvementsPavel Machek
Help welcome :-). Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca9532: read pwm settings from device treeMarkus Moll
While the two pca9532 pwms can be configured in the platform data struct, there was no corresponding dt binding. Users need to configure the pwm if some leds should blink or continue blinking during boot. Signed-off-by: Markus Moll <mmoll@de.pepperl-fuchs.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca9532: correct shift computation in pca9532_getledMarkus Moll
Each led setting occupies two bits in a corresponding led register. Accessing these bits requires shifting and masking, which was implemented incorrectly in pca9532_getled. Two new helper macros concentrate the computation of those masks in one place. Signed-off-by: Markus Moll <mmoll@de.pepperl-fuchs.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: lm36274: Fix warning for undefined parametersDan Murphy
Fix warnings for undefined parameters when building with W=1. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: lm3532: Fix warnings for undefined parametersDan Murphy
Fix warnings for undefined parameters when W=1 is used. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: use flexible arrayMarek Behún
Instead of doing two allocations, allocate only once, by utilizing flexible array members. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: cosmetic: rename variablesMarek Behún
Rename variable of type struct pca963x_led from pca963x to simple led. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: cosmetic: rename variablesMarek Behún
Rename variables chip and pca963x_chip to chipdef and chip, respectively, so that their names correspond to the names of their types. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: use devres LED registering functionMarek Behún
By using devres version of LED registering function we can remove the .remove method from this driver. The probe method also gets simpler. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: pca963x: cosmetic: use helper variables, better indentationMarek Behún
Use helper variables: instead of writing &client->dev at many places, write only dev. The same with pca963x->chip->chipdef, pca963x->chip->client). Use helper variable u8 val for i2c_smbus_write_byte_data, for better indentation. Indent better on various places. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Ricardo Ribalda <ribalda@kernel.org> Cc: Zahari Petkov <zahari@balena.io> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: fix potential zero passed to ERR_PTRMarek Behún
Fix potential ERR_PTR(0). Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: d78b10f5713d9 ("leds: tca6507: use fwnode API instead of OF") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: fix warning triggered by fwnode conversion.Pavel Machek
Robot complains about: All warnings (new ones prefixed by >>): >> drivers/leds/leds-tca6507.c:750:34: warning: unused variable 'of_tca6507_leds_match' [-Wunused-const-variable] static const struct of_device_id of_tca6507_leds_match[] = { Fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: use fwnode API instead of OFMarek Behún
Convert to use fwnode API instead of OF. It is more generic and if someone wants to use this driver without device-tree yet still, they will be able to via swnode fwnodes. Remove the gpio setup function from platdata. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: NeilBrown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-30leds: tca6507: Absorb platform dataMarek Behún
The only in-tree usage of this driver is via device-tree. No on else includes linux/leds-tca6507.h, so absorb the definition of platdata structure. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: NeilBrown <neilb@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: parse linux,default-trigger DT property in LED coreMarek Behún
Do the parsing of `linux,default-trigger` DT property to LED core. Currently it is done in many different drivers and the code is repeated. This patch removes the parsing from 23 drivers: an30259a, aw2013, bcm6328, bcm6358, cr0014114, el15203000, gpio, is31fl32xx, lm3532, lm36274, lm3692x, lm3697, lp50xx, lp8860, lt3593, max77650, mt6323, ns2, pm8058, pwm, syscon, tlc591xx and turris-omnia. There is one driver in drivers/input which parses this property on it's own. I shall send a separate patch there after this is applied. There are still 8 drivers that parse this property on their own because they do not pass the led_init_data structure to the registering function. I will try to refactor those in the future. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: syscon: use struct led_init_data when registeringMarek Behún
By using struct led_init_data when registering we do not need to parse `label` DT property. Moreover `label` is deprecated and if it is not present but `color` and `function` are, LED core will compose a name from these properties instead. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm3532: don't parse label DT propertyMarek Behún
This driver uses extended LED registration, so we do not need to parse the `label` DT property on our own. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: use devres LED registering functionMarek Behún
Now that the potential use-after-free issue is resolved we can use devres for LED registration in this driver. By using devres version of LED registering function we can remove the .remove method from this driver. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: use platform device as parent of LEDMarek Behún
Instead of registering LED under the MFD device, this driver sets the parent of the LED it is registering to the parent of the MFD device (the I2C client device). Because of this we cannot use devres for LED registration, since it can result in use-after-free, see commit a0972fff0947 ("leds: lm36274: fix use-after-free on unbind"). The only other in-tree driver that also registers under the MFD device (drivers/regulator/lm363x-regulator.c) sets the parent to the MFD device. Set the parent of this LED to the MFD device, instead of the I2C client device. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: do not set chip settings in DT parsing functionMarek Behún
These settings are not parsed from DT and therefore semantically should not be set in function with a name lm36274_parse_dt. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: use struct led_init_data when registeringMarek Behún
By using struct led_init_data when registering we do not need to parse `label` DT property. Moreover `label` is deprecated and if it is not present but `color` and `function` are, LED core will compose a name from these properties instead. Previously if the `label` DT property was not present, the code composed name for the LED in the form "parent_name::" For backwards compatibility we therefore set init_data->default_label = ":"; so that the LED will not get a different name if `label` property is not present, nor are `color` and `function`. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: don't iterate through children since there is only oneMarek Behún
Do not use device_for_each_child_node. Since this driver works only with once child node present, use device_get_next_child_node instead. This also saves one level of indentation. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Dan Murphy <dmurphy@ti.com> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: lm36274: cosmetic: rename lm36274_data to chipMarek Behún
Rename this variable so that it is easier to read and easier to write in 80 columns. Also rename variable of this type in lm36274_brightness_set from led to chip, to be consistent. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: Add driver for Acer Iconia Tab A500Dmitry Osipenko
Acer Iconia Tab A500 is an Android tablet device which has two LEDs embedded into the Power Button. Orange LED indicates "battery charging" status and white LED indicates "wake-up/charge-done" status. The new LED driver provides control over both LEDs to userspace. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: pca9532 - simplify the return expression of pca9532_removeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: ns2: use struct led_init_data when registeringMarek Behún
By using struct led_init_data when registering we do not need to parse `label` DT property. Moreover `label` is deprecated and if it is not present but `color` and `function` are, LED core will compose a name from these properties instead. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Simon Guinot <sguinot@lacie.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: ns2: remove unneeded variableMarek Behún
No need to use variable found, we can determine whether the mode was found by comparing iterator variable to its limit. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Simon Guinot <sguinot@lacie.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: ns2: register LED immediately after parsing DT propertiesMarek Behún
Register each LED immediately after parsing OF properties. This simplifies the driver. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Simon Guinot <sguinot@lacie.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>