summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-23as3645a: Unregister indicator LED on device unbindSakari Ailus
The indicator LED was registered in probe but was not removed in driver remove callback. Fix this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Use integer numbers for parsing LEDsSakari Ailus
Use integer numbers for LEDs, 0 is the flash and 1 is the indicator. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Use ams,input-max-microamp as documented in DT bindingsSakari Ailus
DT bindings document the property "ams,input-max-microamp" that limits the chip's maximum input current. The driver and the DTS however used "peak-current-limit" property. Fix this by using the property documented in DT binding documentation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-07Merge tag 'leds_for_4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED class drivers improvements: leds-pca955x: - add Device Tree support and bindings - use devm_led_classdev_register() - add GPIO support - prevent crippled LED class device name - check for I2C errors leds-gpio: - add optional retain-state-shutdown DT property - allow LED to retain state at shutdown leds-tlc591xx: - merge conditional tests - add missing of_node_put leds-powernv: - delete an error message for a failed memory allocation in powernv_led_create() leds-is31fl32xx.c - convert to using custom %pOF printf format specifier Constify attribute_group structures in: - leds-blinkm - leds-lm3533 Make several arrays static const in: - leds-aat1290 - leds-lp5521 - leds-lp5562 - leds-lp8501" * tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: check for I2C errors leds: gpio: Allow LED to retain state at shutdown dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create() leds: lp8501: make several arrays static const leds: lp5562: make several arrays static const leds: lp5521: make several arrays static const leds: aat1290: make array max_mm_current_percent static const leds: pca955x: Prevent crippled LED device name leds: lm3533: constify attribute_group structure dt-bindings: leds: add pca955x leds: pca955x: add GPIO support leds: pca955x: use devm_led_classdev_register leds: pca955x: add device tree support leds: Convert to using %pOF instead of full_name leds: blinkm: constify attribute_group structures. leds: tlc591xx: add missing of_node_put leds: tlc591xx: merge conditional tests
2017-09-05media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann
We get a link error when V4L2_FLASH_LED_CLASS=m and AS3645A is built-in: drivers/leds/leds-as3645a.o: In function `as3645a_v4l2_setup': leds-as3645a.c:(.text+0x258): undefined reference to `v4l2_flash_init' leds-as3645a.c:(.text+0x284): undefined reference to `v4l2_flash_indicator_init' leds-as3645a.c:(.text+0x2a4): undefined reference to `v4l2_flash_release' drivers/leds/leds-as3645a.o: In function `as3645a_remove': leds-as3645a.c:(.text+0x784): undefined reference to `v4l2_flash_release' This adds the same Kconfig dependency that the other V4L2 flash drivers in drivers/leds use, to avoid that broken configuration. Fixes: a56ba8fbcb55 ("media: leds: as3645a: Add LED flash class driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-30leds: pca955x: check for I2C errorsCédric Le Goater
This should also allow probing to fail when a pca955x chip is not found on a I2C bus. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: gpio: Allow LED to retain state at shutdownAndrew Jeffery
In some systems, such as Baseboard Management Controllers (BMCs), we want to retain the state of LEDs across a reboot of the BMC (whilst the host remains up). Implement support for the retain-state-shutdown devicetree property in leds-gpio. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: powernv: Delete an error message for a failed memory allocation in ↵Markus Elfring
powernv_led_create() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: lp8501: make several arrays static constColin Ian King
Don't populate the arrays on the stack, instead make them static const. Makes the object code smaller by 50 bytes: Before: text data bss dec hex filename 5058 1552 64 6674 1a12 drivers/leds/leds-lp8501.o After: text data bss dec hex filename 4788 1776 64 6628 19e4 drivers/leds/leds-lp8501.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: lp5562: make several arrays static constColin Ian King
Don't populate the arrays on the stack, instead make them static const. Makes the object code smaller by over 150 bytes: Before: text data bss dec hex filename 7725 2448 64 10237 27fd drivers/leds/leds-lp5562.o After: text data bss dec hex filename 7184 2832 64 10080 2760 drivers/leds/leds-lp5562.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: lp5521: make several arrays static constColin Ian King
Don't populate the arrays on the stack, instead make them static const. Makes the object code smaller by over 120 bytes: Before: text data bss dec hex filename 8999 4176 64 13239 33b7 drivers/leds/leds-lp5521.o After: text data bss dec hex filename 8554 4496 64 13114 333a drivers/leds/leds-lp5521.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: aat1290: make array max_mm_current_percent static constColin Ian King
Don't populate the array max_mm_current_percent on the stack, instead make it static const. Makes the object code smaller by over 280 bytes: Before: text data bss dec hex filename 7225 1936 64 9225 2409 ./drivers/leds/leds-aat1290.o After: text data bss dec hex filename 6847 2032 64 8943 22ef ./drivers/leds/leds-aat1290.o` Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: pca955x: Prevent crippled LED device nameJacek Anaszewski
In case platform data provided empty LED name string the resulting LED class device name would be crippled. Use corresponding LED chip bit in place of "function" segment of LED class device name then to make the LEDs at least distinguishable. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Reported-by: Colin King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Nate Case <ncase@xes-inc.com>
2017-08-29leds: lm3533: constify attribute_group structureAmitoj Kaur Chawla
Functions working with attribute_groups provided by <linux/device.h> work with const attribute_group. These attribute_group structures do not change at runtime so mark them as const. File size before: text data bss dec hex filename 8272 4608 64 12944 3290 drivers/leds/leds-lm3533.o File size after: text data bss dec hex filename 8368 4512 64 12944 3290 drivers/leds/leds-lm3533.o This change was made with the help of Coccinelle. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-26media: leds: as3645a: Add LED flash class driverSakari Ailus
Add a LED flash class driver for the as3654a flash controller. A V4L2 flash driver for it already exists (drivers/media/i2c/as3645a.c), and this driver is based on that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l2-flash-led-class: Create separate sub-devices for indicatorsSakari Ailus
The V4L2 flash interface allows controlling multiple LEDs through a single sub-devices if, and only if, these LEDs are of different types. This approach scales badly for flash controllers that drive multiple flash LEDs or for LED specific associations. Essentially, the original assumption of a LED driver chip that drives a single flash LED and an indicator LED is no longer valid. Address the matter by registering one sub-device per LED. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (for greybus/light) Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-14leds: pca955x: add GPIO supportCédric Le Goater
The PCA955x family of chips are I2C LED blinkers whose pins not used to control LEDs can be used as general purpose I/Os (GPIOs). The following adds such a support by defining different operation modes for the pins (See bindings documentation for more details). The pca955x driver is then extended with a gpio_chip when some of pins are operating as GPIOs. The default operating mode is to behave as a LED. The GPIO support is conditioned by CONFIG_LEDS_PCA955X_GPIO. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-14leds: pca955x: use devm_led_classdev_registerCédric Le Goater
This lets us remove the loop doing the cleanup in case of failure and also the remove handler of the i2c_driver. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-14leds: pca955x: add device tree supportCédric Le Goater
It will be used in a following patch to define different operation modes for each pin. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-12leds: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-04leds: blinkm: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-07-16leds: tlc591xx: add missing of_node_putJulia Lawall
for_each_child_of_node performs an of_node_get on each iteration, so a return from the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,e1; iterator name for_each_child_of_node; @@ for_each_child_of_node(e1,n) { ... ( of_node_put(n); | e = n | return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-07-16leds: tlc591xx: merge conditional testsJulia Lawall
Merge conditionals that have the same then branch, to prepare for extending that branch with of_node_put. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-07-06Merge tag 'leds_for_4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "This time we're removing more than adding: Removed drivers: leds-versatile: - all users of the Versatile LED driver are deleted and replaced with the very generic leds-syscon leds-sead3: - SEAD3 is using the generic leds-syscon & regmap based register-bit-led driver LED class drivers improvements: ledtrig-gpio: - use threaded IRQ, which both simplifies the code because we can drop the workqueue indirection, and it enables using the trigger for GPIOs that work with threaded IRQs themselves - refresh LED state after GPIO change since the new GPIO may have a different state than the old one leds-lp55xx: - make various arrays static const leds-pca963x: - add bindings to invert polarity" * tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp55xx: make various arrays static const leds: Remove SEAD-3 driver leds: trigger: gpio: Use threaded IRQ leds: trigger: gpio: Refresh LED state after GPIO change leds: Delete obsolete Versatile driver leds: pca963x: Add bindings to invert polarity
2017-06-30leds: lp55xx: make various arrays static constColin Ian King
Several arrays are currently on-stack and instead should be made static const. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-20Merge tag 'v4.12-rc6' into patchworkMauro Carvalho Chehab
Linux 4.12-rc6 * tag 'v4.12-rc6': (813 commits) Linux 4.12-rc6 mm: larger stack guard gap, between vmas virtio_balloon: disable VIOMMU support mm: correct the comment when reclaimed pages exceed the scanned pages userfaultfd: shmem: handle coredumping in handle_userfault() mm: numa: avoid waiting on freed migrated pages swap: cond_resched in swap_cgroup_prepare() mm/memory-failure.c: use compound_head() flags for huge pages perf unwind: Report module before querying isactivation in dwfl unwind fs: pass on flags in compat_writev objtool: Add fortify_panic as __noreturn function powerpc/debug: Add missing warn flag to WARN_ON's non-builtin path USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks drm: mxsfb_crtc: Reset the eLCDIF controller drm/mgag200: Fix to always set HiPri for G200e4 V2 i2c: ismt: fix wrong device address when unmap the data buffer i2c: rcar: use correct length when unmapping DMA powerpc/xive: Fix offset for store EOI MMIOs drm/tegra: Correct idr_alloc() minimum id drm/tegra: Fix lockup on a use of staging API ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-19leds: Remove SEAD-3 driverPaul Burton
SEAD3 is using the generic syscon & regmap based register-bit-led driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led driver via DT for LEDs") merged in the v4.9 cycle. As such the custom SEAD-3 LED driver is now unused, so remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-18Merge tag 'led_fixes_for_4.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "Two LED fixes: - fix signal source assignment for leds-bcm6328 - revert patch that intended to fix LED behavior on suspend but it had a side effect preventing suspend at all due to uevent being sent on trigger removal" * tag 'led_fixes_for_4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: Revert "leds: handle suspend/resume in heartbeat trigger" leds: bcm6328: fix signal source assignment for leds 4 to 7
2017-06-13Revert "leds: handle suspend/resume in heartbeat trigger"Zhang Bo
This reverts commit 5ab92a7cb82c66bf30685583a38a18538e3807db. System cannot enter suspend mode because of heartbeat led trigger. In autosleep_wq, try_to_suspend function will try to enter suspend mode in specific period. it will get wakeup_count then call pm_notifier chain callback function and freeze processes. Heartbeat_pm_notifier is called and it call led_trigger_unregister to change the trigger of led device to none. It will send uevent message and the wakeup source count changed. As wakeup_count changed, suspend will abort. Fixes: 5ab92a7cb82c ("leds: handle suspend/resume in heartbeat trigger") Signed-off-by: Zhang Bo <bo.zhang@nxp.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-13leds: bcm6328: fix signal source assignment for leds 4 to 7Jonas Gorski
Each nibble represents 4 LEDs, and in case of the higher register, bit 0 represents LED 4, so we need to use modulus for the LED number as well. Fixes: fd7b025a238d0a5440bfa26c585eb78097bf48dc ("leds: add BCM6328 LED driver") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-07Merge tag 'media/v4.12-2' into patchworkMauro Carvalho Chehab
media fixes for v4.12-rc4 * tag 'media/v4.12-2': (598 commits) [media] rc-core: race condition during ir_raw_event_register() [media] cec: drop MEDIA_CEC_DEBUG [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER [media] cec: select CEC_CORE instead of depend on it [media] rainshadow-cec: ensure exit_loop is intialized [media] atomisp: don't treat warnings as errors Linux 4.12-rc3 x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release() ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition PCI/msi: fix the pci_alloc_irq_vectors_affinity stub blk-mq: Only register debugfs attributes for blk-mq queues x86/timers: Move simple_udelay_calibration past init_hypervisor_platform ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: flash led class: Use fwnode_handle instead of device_node in initSakari Ailus
Pass the more generic fwnode_handle to the init function than the device_node. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-29leds: trigger: gpio: Use threaded IRQJan Kiszka
This both simplifies the code because we can drop the workqueue indirection, and it enables using the trigger for GPIOs that work with threaded IRQs themselves. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-29leds: trigger: gpio: Refresh LED state after GPIO changeJan Kiszka
The new GPIO may have a different state than the old one. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-22leds: pca955x: Correct I2C FunctionalityTin Huynh
The driver checks an incorrect flag of functionality of adapter. When a driver requires i2c_smbus_read_byte_data and i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA instead I2C_FUNC_I2C. This patch fixes the problem. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-14leds: Delete obsolete Versatile driverLinus Walleij
All users of the Versatile LED driver are deleted and replaced with the very generic leds-syscon. Delete the old driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-14leds: pca963x: Add bindings to invert polarityAnders Darander
Add a new DT property, nxp,inverted-out, to invert the polarity of the output. Tested on PCA9634. Signed-off-by: Anders Darander <anders@chargestorm.se> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-08scripts/spelling.txt: add "memory" pattern and fix typosStephen Boyd
Fix typos and add the following to the scripts/spelling.txt: momery||memory Link: http://lkml.kernel.org/r/20170317011131.6881-1-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-19leds: pca9532: Extend pca9532 device tree supportFelix Brack
This patch extends the device tree support for the pca9532 by adding the leds 'default-state' property. Signed-off-by: Felix Brack <fb@ltec.ch> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-29leds: cpcap: new driverSebastian Reichel
Motorola CPCAP is a PMIC (power management integrated circuit) found in multiple smartphones. This driver adds support for the chip's LED controllers. This introduces support for all controllers used by the Droid 4. According to Motorola's driver (no datasheets available) there a couple of more LED controllers. I did not add support for them, since I cannot verify that they work with my modifications. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-23leds: lp3952: Use 'if (ret)' patternAndy Shevchenko
Instead of unusual "if (!ret)" use "if (ret)" in lp3952_get_label(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-23leds: lp3952: Remove ACPI support for lp3952Andy Shevchenko
In ACPI world any ID should be carefully chosen and registered officially. The discussion [1] as I read it gets to wilful assignment an ID for non-existing real DSDT example. Rafael already told [2] how this device would be enumerated using compatible string. To be more precise look at the possible DSDT excerpt below: Device (LDX0) { Name (_HID, "PRP0001") Name (_DDN, "TI LP3952 compatible led driver") ... }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"compatible", "ti,lp3952"}, ... } }) Based on above, remove non-official ACPI IDs and enumeration from the driver. Note: currently driver has no compatible strings at all, to make above working one should add at least one. [1] https://e2e.ti.com/support/power_management/led_driver/f/192/t/524926 [2] https://www.spinics.net/lists/linux-acpi/msg67125.html Cc: Tony Makkiel <tony.makkiel@daqri.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-23leds: mt6323: Fix an off by one bug in probeDan Carpenter
It should be ">= MT6323_MAX_LEDS" instead of ">". Also "reg" is a u32 so it can't be negative and we can remove the test for negative values. Fixes: 216ec6cc4c19 ("leds: Add LED support for MT6323 PMIC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-21leds: Add LED support for MT6323 PMICSean Wang
MT6323 PMIC is a multi-function device that includes LED function. It allows attaching up to 4 LEDs which can either be on, off or dimmed and/or blinked with the controller. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-08leds: gpio: use OF variant of LED registering functionRafał Miłecki
In leds-gpio we support LEDs specified in DT so we should use (devm_)of_led_classdev_register. This allows passing DT node as argument for use by the LED subsystem. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-08leds: core: add OF variants of LED registering functionsRafał Miłecki
These new functions allow passing an additional device_node argument that will be internally set for created LED device. Thanks to this LED core code and triggers will be able to access DT node for reading extra info. The easiest solution for achieving this was reworking old functions to more generic ones & adding simple defines for API compatibility. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-06dell-led: move driver to drivers/platform/x86/dell-wmi-led.cMichał Kępień
The dell-led driver handles a specific WMI GUID present on some Dell laptops and as such it belongs in the x86 platform driver subsystem. Source code is moved along with the relevant Kconfig and Makefile entries, with some minor modifications: - Kconfig option is renamed from CONFIG_LEDS_DELL_NETBOOKS to CONFIG_DELL_WMI_LED, - the X86 Kconfig dependency is removed as the whole drivers/platform/x86 menu depends on it, so there is no need to duplicate it, - the name of the module's source file is removed from the header comment to avoid the need to update it in the future. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Alex Hung <alex.hung@canonical.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-06dell-led: remove code related to mic mute LEDMichał Kępień
With dell_micmute_led_set() moved to drivers/platform/x86/dell-laptop.c, all remnants of the mic mute LED handling code can be removed from drivers/leds/dell-led.c, restoring it back to the state it was in before commit db6d8cc00773 ("dell-led: add mic mute led interface"). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Alex Hung <alex.hung@canonical.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>