summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2012-11-26leds: leds-gpio: use gpio_request_oneJingoo Han
Using gpio_request_one can make the code simpler because it can set the direction and initial value in one shot. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26leds: lm355x: Return proper error for lm3556_indicator_pattern_store error pathAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26leds: lm3642: Return proper error in lm3642_[torch|strobe]_pin_store error pathsAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-21ARM: kirkwood: DT board setup for Network Space Mini v2Simon Guinot
This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21ARM: kirkwood: DT board setup for Network Space v2 and parentsSimon Guinot
This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-21leds: leds-ns2: add device tree bindingSimon Guinot
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-11ledtrig-cpu: kill useless mutex to fix sleep in atomic contextNathan Lynch
Seeing the following every time the CPU enters or leaves idle on a Beagleboard: BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 no locks held by swapper/0/0. [<c001659c>] (unwind_backtrace+0x0/0xf8) from [<c05aaa7c>] (mutex_lock_nested+0x24/0x380) [<c05aaa7c>] (mutex_lock_nested+0x24/0x380) from [<c043bd1c>] (ledtrig_cpu+0x38/0x88) [<c043bd1c>] (ledtrig_cpu+0x38/0x88) from [<c000f4b0>] (cpu_idle+0xf4/0x120) [<c000f4b0>] (cpu_idle+0xf4/0x120) from [<c07e47c8>] (start_kernel+0x2bc/0x30c) Miles Lane has reported seeing similar splats during system suspend. The mutex in struct led_trigger_cpu appears to have no function: it resides in a per-cpu data structure which never changes after the trigger is registered. So just remove it. Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Bryan Wu <roc@roc-samos.(none)>
2012-10-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits) leds: add output driver configuration for pca9633 led driver leds: lm3642: Use regmap_update_bits() in lm3642_chip_init() leds: Add new LED driver for lm3642 chips leds-lp5523: Fix riskiness of the page fault leds-lp5523: turn off the LED engines on unloading the driver leds-lm3530: Fix smatch warnings leds-lm3530: Use devm_regulator_get function leds: leds-gpio: adopt pinctrl support leds: Add new LED driver for lm355x chips leds-lp5523: use the i2c device id rather than fixed name leds-lp5523: add new device id for LP55231 leds-lp5523: support new LP55231 device leds: triggers: send uevent when changing triggers leds-lp5523: minor code style fixes leds-lp5523: change the return type of lp5523_set_mode() leds-lp5523: set the brightness to 0 forcely on removing the driver leds-lp5523: add channel name in the platform data leds: leds-gpio: Use of_get_child_count() helper leds: leds-gpio: Use platform_{get,set}_drvdata leds: leds-gpio: use of_match_ptr() ...
2012-10-05Merge tag 'mfd-3.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02mfd: 88pm860x: Device tree supportHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-09-24leds: add output driver configuration for pca9633 led driverPeter Meerwald
the pca9633 leds driver can be used in open-drain or totem pole (a.k.a. push/pull) output driver mode; default is the later the patch allows to set the output driver mode using platform data (similar to configuration inferface provided by the tca6507 led driver) v2: move leds-pca9633.h to include/linux/platform_data/ (Bryan Wu) Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-24leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()Axel Lin
Use regmap_update_bits() to replace regmap_read() + regmap_write(). With this patch, we only show the error message when regmap_update_bits() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: G.Shark Jeong<gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-09-19ARM: orion: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the orion include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de>
2012-09-16Merge tag 'tegra-for-3.7-drivers-i2c' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers From Stephen Warren: ARM: tegra: i2c driver enhancements mostly related to clocking This branch contains a number of fixes and cleanups to the Tegra I2C driver related to clocks. These are based on the common clock conversion in order to avoid duplicating the clock driver changes before and after the conversion. Finally, a bug-fix related to I2C_M_NOSTART is included. This branch is based on previous pull request tegra-for-3.7-common-clk. * tag 'tegra-for-3.7-drivers-i2c' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: Tegra: Add smp_twd clock for Tegra20 ARM: tegra: cpu-tegra: explicitly manage re-parenting ARM: tegra: fix overflow in tegra20_pll_clk_round_rate() ARM: tegra: Fix data type for io address ARM: tegra: remove tegra_timer from tegra_list_clks ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30 ARM: tegra: Remove duplicate code ARM: tegra: Port tegra to generic clock framework ARM: tegra: Add clk_tegra structure and helper functions ARM: tegra: Rename tegra20 clock file ARM: tegra20: Separate out clk ops and clk data ARM: tegra30: Separate out clk ops and clk data ARM: tegra: fix U16 divider range check ... + sync to v3.6-rc4 Resolved remove/modify conflict in arch/arm/mach-sa1100/leds-hackkit.c caused by the sync with v3.6-rc4. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-13leds: Add new LED driver for lm3642 chipsG.Shark Jeong
This driver is a general version for LM642 led chip of TI. LM3642 : The LM3642 is a 4MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. The LM3642 is controlled via an I2C-compatible interface. Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-13leds-lp5523: Fix riskiness of the page faultKim, Milo
The last attribute should be terminated as NULL because any member of attribute structure is accessed while adding the sysfs file. If not, invalid address may cause the page fault problem. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-13leds-lp5523: turn off the LED engines on unloading the driverKim, Milo
The LP5523 has 3 engines which are used for running LED patterns. These engines should be off while unloading the driver. Obviously, LP5523 platform data are used for releasing the resource such like enable()/release_resource(), but these are not mandatory. Therefore this patch is required without the platform data dependency. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-12leds-lm3530: Fix smatch warningsSachin Kamat
Fixes the following smatch warnings: drivers/leds/leds-lm3530.c:361 lm3530_mode_set() info: why not propagate 'mode' from lm3530_get_mode_from_str() instead of -22? drivers/leds/leds-lm3530.c:432 lm3530_probe() info: why not propagate 'err' from lm3530_init_registers() instead of -19? drivers/leds/leds-lm3530.c:438 lm3530_probe() info: why not propagate 'err' from led_classdev_register() instead of -19? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-12leds-lm3530: Use devm_regulator_get functionSachin Kamat
Device managed functions are already used in this file. Hence convert regulator_get() too to use it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: leds-gpio: adopt pinctrl supportAnilKumar Ch
Adopt pinctrl support to leds-gpio driver based on leds-gpio device pointer, pinctrl driver configure SoC pins to GPIO mode according to definitions provided in .dts file. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: Add new LED driver for lm355x chipsG.Shark Jeong
This driver is a general version for LM355x,lm3554 and lm3556,led chips of TI. LM3554 : The LM3554 is a 2 MHz fixed-frequency synchronous boost converter with 1.2A dual high side led drivers. Datasheet: www.ti.com/lit/ds/symlink/lm3554.pdf LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf (bryan.wu@canonical.com: use flush_work() to replace flush_work_sync() which is deprecated) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: use the i2c device id rather than fixed nameKim, Milo
LP5523 driver supports both LP5523 and LP55231. The i2c device id is one of the two - lp5523 or lp55231. So it's better to use matching i2c device id while enumerating the device and naming LED channels. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: add new device id for LP55231Kim, Milo
To support LP55231 device, the device id is added. Additionally, the i2c driver name is changed from lp5523 to lp5523x. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: support new LP55231 deviceKim, Milo
New TI LP55231 device has same I2C register layout as LP5523. Therefore, all of LED operations can be shared with the LP5523 driver. To support new LP55231 device explicitly, the device description is added in the configuration file. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: triggers: send uevent when changing triggersColin Cross
Some triggers create sysfs files when they are enabled. Send a uevent "change" notification whenever the trigger is changed to allow userspace processes such as udev to modify permissions on the new files. A change notification will also be sent during registration of led class devices or led triggers if the default trigger of an led class device is found. (bryan.wu@canonical.com: rename trigger to trig to fix the build error) Signed-off-by: Colin Cross <ccross@android.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: minor code style fixesKim, Milo
(a) use LP5523_ENABLE rather than magic number 0x40 (b) use min_t() in lp5523_mux_parse() (c) skip while loop and just return if invalid command Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: change the return type of lp5523_set_mode()Kim, Milo
The return value of this function is not handled any place, so make it as void type. And three if-statements are replaced with switch-statements. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: set the brightness to 0 forcely on removing the driverKim, Milo
Turning off the brightness of each channel is required when removing the driver. So use flush_work() rather than cancel_work_sync() to execute remaining brightness works. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-lp5523: add channel name in the platform dataKim, Milo
The name of each led channel is configurable. If the name is NULL, just use the channel id for making the channel name Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: leds-gpio: Use of_get_child_count() helperTobias Klauser
Use of_get_child_count() instead of custom implementation. Signed-off-by: Tobias Klauser <klto@zhaw.ch> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: leds-gpio: Use platform_{get,set}_drvdataTobias Klauser
Use the wrapper functions, so we can directly pass a struct platfrom_device. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: leds-gpio: use of_match_ptr()Tobias Klauser
Instead of having to define the match table to NULL if CONFIG_OF isn't set, use the of_match_ptr() macro which will do this for us. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: delay led_set_brightness if stopping soft-blinkFabio Baltieri
Delay execution of led_set_brightness() if need to stop soft-blink timer. This allows led_set_brightness to be called in hard-irq context even if soft-blink was activated on that LED. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: wm8350: Convert to devm_regulator_get()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-clevo-mail: Fix Clevo M5x0V DMI stringsOndrej Zary
There are more variants of Clevo M5x0V laptops and Positivo Mobile is just one of them. Another one is UMAX VisionBook 2400WXC. Use only generic Clevo DMI strings to match all variants. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds-clevo-mail: add MODULE_DEVICE_TABLEOndrej Zary
Enable autoloading of leds-clevo-mail by using MODULE_DEVICE_TABLE. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11mfd: 88pm860x: Use REG in leds resourceHaojian Zhuang
Since the resources of 88pm860x leds are changed from IORESOURCE_IO to IORESOURCE_REG that is register offset, change the original self-defined IORESOURCE_IO to register offset. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: 88pm860x: Convert to IORESOURCE_REGMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-20workqueue: deprecate flush[_delayed]_work_sync()Tejun Heo
flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-13leds: renesas: fix error handlingArnd Bergmann
bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path" introduced a possible case in which r_tpu_probe calls iounmap on a wild pointer. This changes the one case that was missed in the same way as the other error paths. Without this patch, building kota2_defconfig results in: drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe': drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Revert "leds: use led_set_brightness in led_trigger_event"Fabio Baltieri
This reverts commit a0193cbee0809d65362a0767b2d50306b145b2f5. The problem with the original commit was that it caused a warning with the MMC trigger calling del_timer_sync from hard-irq context. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-08leds: lp8788: Fix updating scale configuration bitsAxel Lin
We need to do left shift (cfg->num + LP8788_ISINK_SCALE_OFFSET) bits for updating scale configuration. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-31led-triggers: create a trigger for CPU activityBryan Wu
Attempting to consolidate the ARM LED code, this removes the custom RealView LED trigger code to turn LEDs on and off in response to CPU activity and replace it with a standard trigger. (bryan.wu@canonical.com: It introduces several syscore stubs into this trigger. It also provides ledtrig_cpu trigger event stub in <linux/leds.h>. Although it was inspired by ARM work, it can be used in other arch.) Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jochen Friedrich <jochen@scram.de>
2012-07-27leds-lp8788: forgotten unlock at lp8788_led_workDevendra Naga
at default case of switch we return with out unlocking the mutex. Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-27LEDS: propagate error codes in blinkm_detect()Dan Carpenter
Use the error codes from the lower levels instead of -ENODEV. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-27LEDS: memory leak in blinkm_led_common_set()Dan Carpenter
This can return without freeing the bl_work struct. Also there was no check for allocation failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>