summaryrefslogtreecommitdiff
path: root/drivers/mailbox/bcm-pdc-mailbox.c
AgeCommit message (Collapse)Author
2018-12-21mailbox: bcm-pdc: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-28mailbox: bcm-pdc: Add Northstar Plus support to PDC driverSteve Lin
Adds support for Northstar Plus (NS+) products to the PDC mailbox driver. The PDC driver was originally written to support the PDC ring manager in the Northstar2 (64-bit) device. The NS+ (32 bit device) uses an almost identical ring manager, though with a different name. We just need to check for the type of hardware in use, in order to write the appropriate interrupt configuration register. Also updated DMA width to be correct for both NS+ and NS2. Tested on NS+ and NS2. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Remove unnecessary void* castsRob Rice
Remove unnecessary void* casts in register writes. Fix two other minor formatting issues. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Simplify interrupt handler logicRob Rice
Earlier versions of the PDC driver registered for both transmit and receive interrupts. The hard IRQ handler had to communicate to the soft handler which interrupt(s) had occurred. The PDC driver no longer registers for tx interrupts. So there is no reason to save the intstatus. So remove the intstatus member of the PDC state. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Performance improvementsRob Rice
Three changes to improve performance in the PDC driver: - disable and reenable interrupts while the interrupt handler is running - update rxin and txin descriptor indexes more efficiently - group receive descriptor context into a structure and keep context in a single array rather than five to improve locality of reference Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptorsRob Rice
In PDC driver, it is not necessary to use iowrite32() when writing DMA descriptors to the transmit and receive rings. The ring memory is in host memory. So convert to normal assignment statements. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from threaded IRQ to taskletRob Rice
Previously used threaded IRQs in the PDC driver to defer processing the rx DMA ring after getting an rx done interrupt. Instead, use a tasklet at normal priority for deferred processing. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Try to improve branch predictionRob Rice
Use likely/unlikely directives to improve branch prediction. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: streamline rx codeRob Rice
Remove the unnecessary rmb() from the receive path. If the rx ring has multiple messages ready, avoid reading last_rx_curr multiple times from the register. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from interrupts to poll for tx doneRob Rice
The PDC driver is a mailbox controller. A mailbox controller can report that a mailbox message has been "transmitted" either when a tx interrupt fires or by having the mailbox framework poll. This commit converts the PDC driver to the poll method. We found that the tx interrupt happens when the descriptors are read by the SPU hw. Thus, the interrupt method does not allow more than one tx message in the PDC tx DMA ring at a time. To keep the SPU hw busy, we would like to keep the tx ring full under heavy load. With the poll method, the PDC driver responds that the previous message has been transmitted if the tx ring has space for another message. SPU request messages take a variable number of descriptors. If 15 descriptors are available, there is a good chance another message will fit. Also increased the ring size from 128 to 512 descriptors. With this change, I found the PDC driver hangs on its spinlock under heavy load. The PDC spinlock is not required; so I removed it. Calls to pdc_send_data() are already synchronized because of the channel spinlock in the mailbox framework. Other references to ring indexes should not require locking because they only written on either the tx or rx side. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: PDC driver leaves debugfs files after removalSteve Lin
Minor fix to ensure that debugfs stats pseudo-files are removed when driver module is unloaded. Previously, the call to debugfs_remove_recursive() was never being called since the directory was not empty, and a seg fault would occur if another process tried to access these leftover files. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Changes so mbox client can be removed / re-insertedSteve Lin
Ensure that DMA is disabled, and pointers reset, when changing DMA base addresses in pdc_ring_init(). This allows a mailbox client to be re-inserted after being removed. Otherwise, the DMA doesn't restart so the client hangs while being reinserted. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Use octal permissions rather than symbolicRob Rice
When creating the debugfs files for the PDC driver, use octal file permissions rather than symbolic file permissions. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29fix:mailbox:bcm-pdc-mailbox:mark symbols static where possibleBaoyou Xie
We get 2 warnings when biuld kernel with W=1: drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes] drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown()Dan Carpenter
We can't pass NULL pointers to pdc_ring_free() so I moved the check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-07-28mailbox: Fix format and type mismatches in Broadcom PDC driverRob Rice
Fix format and type mismatches in a couple debug prints in the Broadcom PDC driver. Use %pad for dma_addr_t and %pa for resource_size_t. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-07-28mailbox: Add Broadcom PDC mailbox driverRob Rice
The Broadcom PDC mailbox driver is a mailbox controller that manages data transfers to and from one or more offload engines. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>