summaryrefslogtreecommitdiff
path: root/drivers/md/dm-raid.c
AgeCommit message (Collapse)Author
2016-08-17dm raid: support raid0 with missing metadata devicesHeinz Mauelshagen
The raid0 MD personality does not start a raid0 array with any of its data devices missing. dm-raid was removing data/metadata device pairs unconditionally if it failed to read a superblock off the respective metadata device of such pair, resulting in failure to start arrays with the raid0 personality. Avoid removing any data/metadata device pairs in case of raid0 (e.g. lvm2 segment type 'raid0_meta') thus allowing MD to start the array. Also, avoid region size validation for raid0. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16dm raid: enhance attempt_restore_of_faulty_devices() to support more devicesHeinz Mauelshagen
attempt_restore_of_faulty_devices() is limited to 64 when it should support the new maximum of 253 when identifying any failed devices. It clears any revivable devices via an MD personality hot remove and add cylce to allow for their recovery. Address by using existing functions to retrieve and update all failed devices' bitfield members in the dm raid superblocks on all RAID devices and check for any devices to clear in it. Whilst on it, don't call attempt_restore_of_faulty_devices() for any MD personality not providing disk hot add/remove methods (i.e. raid0 now), because such personalities don't support reviving of failed disks. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16dm raid: fix restoring of failed devices regressionHeinz Mauelshagen
'lvchange --refresh RaidLV' causes a mapped device suspend/resume cycle aiming at device restore and resync after transient device failures. This failed because flag RT_FLAG_RS_RESUMED was always cleared in the suspend path, thus the device restore wasn't performed in the resume path. Solve by removing RT_FLAG_RS_RESUMED from the suspend path and resume unconditionally. Also, remove superfluous comment from raid_resume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-16dm raid: fix frozen recovery regressionHeinz Mauelshagen
On LVM2 conversions via lvconvert(8), the target keeps mapped devices in frozen state when requesting RAID devices be resynchronized. This applies to e.g. adding legs to a raid1 device or taking over from raid0 to raid4 when the rebuild flag's set on the new raid1 legs or the added dedicated parity stripe. Also, fix frozen recovery for reshaping as well. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-04dm raid: fix use of wrong status char during resynchronizationHeinz Mauelshagen
During a resynchronization, device status char 'a' is output on the raid status line for every device of a RAID set. It changes from 'a' to 'A' (unless device failure) when the resynchronization completes. Interrupting and restarting a resynchronization, by reloading the DM table, erroneously lead to status char 'A'. Fix this by avoiding setting the MD_RECOVERY_REQUESTED flag in raid_preresume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03dm raid: constructor fails on non-zero incompat_featuresHeinz Mauelshagen
When lvm2 userspace requests a RaidLV repair, it sets the rebuild constructor flag on the new replacement DataLVs but does not clear the respective MetaLVs. Hence the superblock that is loaded from such new MetaLVs may have a non-zero incompat_features member and the constructor will fail with false-positive on incompat_features. Solve by initializing the incompat_features member properly. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03dm raid: fix processing of max_recovery_rate constructor flagHeinz Mauelshagen
__CTR_FLAG_MIN_RECOVERY_RATE was used instead of __CTR_FLAG_MAX_RECOVERY_RATE thus causing max_recovery_rate to be rejected in case min_recovery_rate was already set. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-19dm raid: fix random optimal_io_size for raid0Heinz Mauelshagen
raid_io_hints() was retrieving the number of data stripes used for the calculation of io_opt from struct r5conf, which is not defined for raid0 mappings. Base the calculation on the in-core raid_set structure instead. Also, adjust to use to_bytes() for the sector -> bytes conversion throughout. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-19dm raid: address checkpatch.pl complaintsHeinz Mauelshagen
Use 'unsigned int' where appropriate. Return negative errors. Correct an indentation. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: change logical functions to actually return boolHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: use rdev_for_each in statusHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: use rs->raid_disks to avoid memory leaks on freeHeinz Mauelshagen
Also makes code more consistent throughout. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: support delta_disks for raid1, fix table outputHeinz Mauelshagen
Add "delta_disks" constructor argument support to raid1 to allow for consistent userspace disk addition/removal handling. Fix raid_status() to report all raid disks with status and table output on disk adding reshapes, not just the ones listed on the mddev; optimize its rebuild and writemostly output. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: enhance reshape check and factor out reshape setupHeinz Mauelshagen
Enhance rs_reshape_requested() check function to be more transparent and fix its raid10 check. Streamline the constructor by factoring out reshaping preparation into fucntion rs_prepare_reshape(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: allow resize during recoveryHeinz Mauelshagen
Resizing a RAID set during recovery can be allowed, because the MD resynchronization thread will either stop any ongoing recovery in case of shrinking below the current recovery position or carry on recovery to the new size if the set is growing. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix rs_is_recovering() to allow for lvextendHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix rebuild and catch bogus sync/resync flagsHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix ctr memory leaks on error pathsHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix typo in write_mostly flagHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: also reject size change during recoveryHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix new superblock/bitmap creation on disk additionHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: add comments and fix typosHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix raid10 device size error on out-of-place reshapeHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: prohibit 'nosync' on new raid6 and reject resize during reshapeHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: clarify and fix recoveryHeinz Mauelshagen
Add function rs_setup_recovery() to allow for defined setup of RAID set recovery in the constructor. Will be called with dev_sectors={0, rdev->sectors, MaxSectors} to recover a new or enforced sync, grown or not to be synhronized RAID set respectively. Prevents recovery on raid0, which doesn't support it. Enforces recovery on raid6 to ensure properly defined Syndromes mandatory for that MD personality are being created. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: fix rs_set_capacity on growing reshapeHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: make rs_set_capacity to work on shrinking reshapeHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: enhance comments in takeover checksHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: remove bogus comment and fix comment typosHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: more restricting data_offset value checksHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: reject too many write_mostly devicesHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: the sync_page_io() metadata_op argument is boolHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: prohibit to pass in both sync and nosync ctr flagsHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-18dm raid: avoid superfluous memory barriers on static metadataHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-16dm raid: don't use 'const' in function returnArnd Bergmann
A newly introduced function has 'const int' as the return type, but as "make W=1" reports, that has no meaning: drivers/md/dm-raid.c:510:18: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] This changes the return type to plain 'int'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 33e53f06850f ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: fix failed takeover/reshapes by keeping raid set frozenHeinz Mauelshagen
Superblock updates where bogus causing some takovers/reshapes to fail. Introduce new runtime flag (RT_FLAG_KEEP_RS_FROZEN) to keep a raid set frozen when a layout change was requested. Userpace will immediately reload the table w/o the flags requesting such change once they made it to the superblocks and any change of recovery/reshape offsets has to be avoided until after read. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: support to change bitmap region sizeHeinz Mauelshagen
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: add reshaping support to the targetHeinz Mauelshagen
Add bool functions rs_is_recovering and rs_is_reshaping() to test for ongoing recovery/reshaping respectively in order to reject respective requests on ongoing ones. Remove ctr array size check, because ti->len and array sectors will differ during disk addition/removal reshape. Use __is_raid10_near() rather than type string compare. Introduce rs_check_reshape() and rs_start_reshape(), use the former in the ctr to reject bogus rehsape requests and the latter in preresume to actually start a reshape. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: add prerequisite functions and definitions for reshapingHeinz Mauelshagen
Add rs_is_reshapable(), rs_data_stripes(), rs_reshape_requested(), rs_set_dev_and_array_sectors() and rs_adjust_data_offsets() Remove superfluous check for reshape message Correct runtime bit definitions to be incremental Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: inverse check for flags from invalid to valid flagsHeinz Mauelshagen
It is more intuitive to manage each raid level's features in terms of what is supported rather than what isn't supported. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: various code cleanupsMike Snitzer
Renamed functions and variables with leading single underscore to have a double underscore. Renamed some functions to have better names. Folded functions that were split out without reason. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: rename functions that alloc and free struct raid_setMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: remove all the bitops wrappersMike Snitzer
Removes obfuscation that is of little value. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: rename _in_range to __within_rangeMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: add missing "dm-raid0" module aliasMike Snitzer
Also update module description to "raid0/1/10/4/5/6 target" Reported by Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: rename _argname_by_flag to dm_raid_arg_name_by_flagMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: bump to v1.9.0 and make the extended SB feature flag reflect itMike Snitzer
No idea what Heinz was doing with the versioning but upstream commit 4c9971ca6a ("dm raid: make sure no feature flags are set in metadata") bumped to 1.8.0 already. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: remove ti_error_* wrappersMike Snitzer
There ti_error_* wrappers added very little. No other DM target has ever gone to such lengths to wrap setting ti->error. Also fixes some NULL derefences via rs->ti->error. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: tabify appropriate whitespaceMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14dm raid: enhance status interface and fixup takeover/raid0Heinz Mauelshagen
The target's status interface has to provide the new 'data_offset' value to allow userspace to retrieve the kernels offset to the data on each raid device of a raid set. This is the base for out-of-place reshaping required to not write over any data during reshaping (e.g. change raid6_zr -> raid6_nc): - add rs_set_cur() to be able to start up existing array in case of no takeover; use in ctr on takeover check - enhance raid_status() - add supporting functions to get resync/reshape progress and raid device status chars - fixup rebuild table line output race, which does miss to emit 'rebuild N' on fully synced/rebuild devices, because it is relying on the transient 'In_sync' raid device flag - add new status line output for 'data_offset', which'll later be used for out-of-place reshaping - fixup takeover not working for all levels - fixup raid0 message interface oops caused by missing checks for the md threads, which don't exist in case of raid0 - remove ALL_FREEZE_FLAGS not needed for takeover - adjust comments Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>