| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-array fixes
- dm-verity forward error correction fixes
- remove the flag DM_TARGET_PASSES_INTEGRITY from dm-ebs
- dm-thin RCU list fix
* tag 'for-6.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: make get_first_thin use rcu-safe list first function
dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY
dm-verity FEC: Avoid copying RS parity bytes twice.
dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)
dm array: fix cursor index when skipping across block boundaries
dm array: fix unreleased btree blocks on closing a faulty array cursor
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
|
|
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep")
Cc: stable@vger.kernel.org
Acked-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- remove unused functions and variables
- rate-limit error messages in syslog
- fix typo
- remove u64 alignment requirement for murmurhash
- reset bi_ioprio to the default for dm-vdo
- add support for get_unique_id
- Add missing destroy_work_on_stack() to dm-thin
- use kmalloc to allocate power-of-two sized buffers in bufio
* tag 'for-6.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: remove the unused "data_start" variable
dm-bufio: use kmalloc to allocate power-of-two sized buffers
dm thin: Add missing destroy_work_on_stack()
dm: add support for get_unique_id
dm vdo: fix function doc comment formatting
dm vdo int-map: remove unused parameters
dm-vdo: reset bi_ioprio to the default value when the bio is reset
dm-vdo murmurhash: remove u64 alignment requirement
dm: Fix typo in error message
dm ioctl: rate limit a couple of ioctl based error messages
dm vdo: Remove unused uds_compute_index_size
dm vdo: Remove unused functions
dm: zoned: Remove unused functions
dm: Remove unused dm_table_bio_based
dm: Remove unused dm_set_md_type
dm cache: Remove unused functions in bio-prison-v1
dm cache: Remove unused dm_cache_size
dm cache: Remove unused dm_cache_dump
dm cache: Remove unused btracker_nr_writebacks_queued
|
|
This commit add missed destroy_work_on_stack() operations for pw->worker in
pool_work_wait().
Fixes: e7a3e871d895 ("dm thin: cleanup noflush_work to use a proper completion")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add a helper to get the queue_limits from the bdev without having to
poke into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241029141937.249920-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Remove use of the blk_limits_io_{min,opt} and assign the values directly
to the queue_limits structure. For the io_opt this is a completely
mechanical change, for io_min it removes flooring the limit to the
physical and logical block size in the particular caller. But as
blk_validate_limits will do the same later when actually applying the
limits, there still is no change in overall behavior.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM discard regressions due to DM core switching over to using
queue_limits_set() without DM core and targets first being updated to
set (and stack) discard limits in terms of max_hw_discard_sectors and
not max_discard_sectors
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size
* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always manage discard support in terms of max_hw_discard_sectors
dm-integrity: set discard_granularity to logical block size
|
|
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Since commit 1c0e720228ad ("dm: use queue_limits_set") it was reported
dm-thinp was failing in a few fstests (generic/347 and generic/405)
with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being
reported, e.g.:
WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50
blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX,
so given how block core now sets max_discard_sectors (detailed above)
it follows that blk_stack_limits() stacks up the underlying device's
max_hw_discard_sectors and max_discard_sectors is set to match it. If
max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then
dm_cell_key_has_valid_range() will trigger the warning with:
WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE)
Aside from this warning, the discard will fail. Fix this and other DM
issues by governing discard support in terms of max_hw_discard_sectors
instead of max_discard_sectors.
Reported-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 1c0e720228ad ("dm: use queue_limits_set")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Use bio_list_merge_init instead of open coding bio_list_merge and
bio_list_init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM crypt to allocate compound pages if possible
- Fix DM crypt target's crypt_ctr_cipher_new return value on invalid
AEAD cipher
- Fix DM flakey testing target's write bio corruption feature to
corrupt the data of a cloned bio instead of the original
- Add random_read_corrupt and random_write_corrupt features to DM
flakey target
- Fix ABBA deadlock in DM thin metadata by resetting associated bufio
client rather than destroying and recreating it
- A couple other small DM thinp cleanups
- Update DM core to support disabling block core IO stats accounting
and optimize away code that isn't needed if stats are disabled
- Other small DM core cleanups
- Improve DM integrity target to not require so much memory on 32 bit
systems. Also only allocate the recalculate buffer as needed (and
increasingly reduce its size on allocation failure)
- Update DM integrity to use %*ph for printing hexdump of a small
buffer. Also update DM integrity documentation
- Various DM core ioctl interface hardening. Now more careful about
alignment of structures and processing of input passed to the kernel
from userspace.
Also disallow the creation of DM devices named "control", "." or ".."
- Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM
core's ioctl and bufio code
* tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc
dm integrity: scale down the recalculate buffer if memory allocation fails
dm integrity: only allocate recalculate buffer when needed
dm integrity: reduce vmalloc space footprint on 32-bit architectures
dm ioctl: Refuse to create device named "." or ".."
dm ioctl: Refuse to create device named "control"
dm ioctl: Avoid double-fetch of version
dm ioctl: structs and parameter strings must not overlap
dm ioctl: Avoid pointer arithmetic overflow
dm ioctl: Check dm_target_spec is sufficiently aligned
Documentation: dm-integrity: Document an example of how the tunables relate.
Documentation: dm-integrity: Document default values.
Documentation: dm-integrity: Document the meaning of "buffer".
Documentation: dm-integrity: Fix minor grammatical error.
dm integrity: Use %*ph for printing hexdump of a small buffer
dm thin: disable discards for thin-pool if no_discard_passdown
dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h
dm: skip dm-stats work in alloc_io() unless needed
dm: avoid needless dm_io access if all IO accounting is disabled
dm: support turning off block-core's io stats accounting
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
Also rename disable_passdown_if_not_supported to
disable_discard_passdown_if_not_supported.
And fold passdown_enabled() into only caller.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Removes assumptions about what might follow the discard setup code
(previously the code would return early if discards not enabled).
Makes it possible to add more capabilites to the end of each .io_hints
method (which is the natural thing to do when adding new features).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Always returns DM_MAPIO_REMAPPED so no need for variable.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.
Commit 3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:
Before commit 3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't have bio_detain() BUG_ON if a dm_cell_key is beyond
BIO_PRISON_MAX_RANGE or spans a boundary.
Update dm-thin.c:build_key() to use dm_cell_key_has_valid_range() which
will do this checking without using BUG_ON. Also update
process_discard_bio() to check the discard bio that DM core passes in
(having first imposed max_discard_granularity based splitting).
dm_cell_key_has_valid_range() will merely WARN_ON_ONCE if it returns
false because if it does: it is programmer error that should be caught
with proper testing. So relax the BUG_ONs to be WARN_ON_ONCE.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Split the bio prison into multiple regions, with a separate rbtree and
associated lock for each region.
To get fast bio prison locking and not damage the performance of
discards too much the bio-prison now stipulates that discards should
not cross a BIO_PRISON_MAX_RANGE boundary.
Because the range of a key (block_end - block_begin) must not exceed
BIO_PRISON_MAX_RANGE: break_up_discard_bio() now ensures the data
range reflected in PHYSICAL key doesn't exceed BIO_PRISON_MAX_RANGE.
And splitting the thin target's discards (handled with VIRTUAL key) is
achieved by updating dm-thin.c to set limits->max_discard_sectors in
terms of BIO_PRISON_MAX_RANGE _and_ setting the thin and thin-pool
targets' max_discard_granularity to true.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Reduce the time that a spinlock is held in cell_defer_no_holder().
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This is an already known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demand triggers swap I/O on the dm-thin volume itself.
But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to
encrypted device"), the limit_swap_bios target flag can also be used
for dm-thin to avoid the recursive I/O when it is used as swap.
Fix is to simply set ti->limit_swap_bios to true in both pool_ctr()
and thin_ctr().
In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.
The following fio command line is used in my test,
fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
--ioengine libaio --filename /dev/vg/main --rw randrw \
--blocksize 1M --numjobs 32 --time_based --runtime=12h
Without this fix, the whole system can be locked up within 15 seconds.
With this fix, there is no any deadlock or hung task observed after
2 hours of running fio.
Furthermore, if blocksize is changed from 1M to 128M, after around 30
seconds fio has no visible I/O, and the out-of-memory killer message
shows up in kernel message. After around 20 minutes all fio processes
are killed and the whole system is back to being alive.
This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.
Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has
deprecated its use.
Suggested-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix use-after-free races due to missing resource cleanup during DM
target destruction in DM targets: thin-pool, cache, integrity and
clone.
- Fix ABBA deadlocks in DM thin-pool and cache targets due to their use
of a bufio client (that has a shrinker whose locking can cause the
incorrect locking order).
- Fix DM cache target to set its needs_check flag after first aborting
the metadata (whereby using reset persistent-data objects to update
the superblock with, otherwise the superblock update could be dropped
due to aborting metadata). This was found with code-inspection when
comparing with the equivalent in DM thinp code.
- Fix DM thin-pool's presume to continue resuming the device even if
the pool in is fail mode -- otherwise bios may never be failed up the
IO stack (which will prevent resetting the thin-pool target via table
reload)
- Fix DM thin-pool's metadata to use proper btree root (from previous
transaction) if metadata commit failed.
- Add 'waitfor' module param to DM module (dm_mod) to allow dm-init to
wait for the specified device before continuing with its DM target
initialization.
* tag 'for-6.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: Use last transaction's pmd->root when commit failed
dm init: add dm-mod.waitfor to wait for asynchronously probed block devices
dm ioctl: fix a couple ioctl codes
dm ioctl: a small code cleanup in list_version_get_info
dm thin: resume even if in FAIL mode
dm cache: set needs_check flag after aborting metadata
dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
dm integrity: Fix UAF in dm_integrity_dtr()
dm cache: Fix UAF in destroy()
dm clone: Fix UAF in clone_dtr()
dm thin: Fix UAF in run_timer_softirq()
|
|
This macro is obsolete, so replace the last few uses with open coded
bi_opf assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de <mailto:colyli@suse.de>>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221206144057.720846-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a thinpool set fail_io while suspending, resume will fail with:
device-mapper: resume ioctl on vg-thinpool failed: Invalid argument
The thin-pool also can't be removed if an in-flight bio is in the
deferred list.
This can be easily reproduced using:
echo "offline" > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
dmsetup suspend /dev/mapper/pool
mkfs.ext4 /dev/mapper/thin
dmsetup resume /dev/mapper/pool
The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.
Fix this by adding FAIL mode check at the end of pool_preresume().
Cc: stable@vger.kernel.org
Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy().
Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0d ("dm: add thin provisioning target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xeb/0x3f4
kasan_report.cold+0xe6/0x147
dm_pool_register_metadata_threshold+0x40/0x80
pool_ctr+0xa0a/0x1150
dm_table_add_target+0x2c8/0x640
table_load+0x1fd/0x430
ctl_ioctl+0x2c4/0x5a0
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb3/0xd0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This can be easily reproduced using:
echo offline > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"
If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).
Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".
Fixes: ac8c3f3df65e4 ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the
need for dm_sumbit_bio_remap() callers to know whether they are
calling for a workqueue or from the original dm_submit_bio().
Add map_task to dm_io struct, record the map_task in alloc_io and
clear it after all target ->map() calls have completed. Update
dm_sumbit_bio_remap to check if 'current' matches io->map_task rather
than rely on passed 'from_rq' argument.
This change really simplifies the chore of porting each DM target to
using dm_sumbit_bio_remap() because there is no longer the risk of
programming error by not completely knowing all the different contexts
a particular method that calls dm_sumbit_bio_remap() might be used in.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use time_is_before_jiffies() to improve code readability.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use blkdev_issue_flush, which uses an on-stack bio instead of an
opencoded version with a bio embedded into struct pool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove handling of NULL returns from sleeping bio_alloc calls given that
those can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the proper helpers to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For device mapper targets to take advantage of IMA's measurement
capabilities, the status functions for the individual targets need to be
updated to handle the status_type_t case for value STATUSTYPE_IMA.
Update status functions for the following target types, to log their
respective attributes to be measured using IMA.
01. cache
02. crypt
03. integrity
04. linear
05. mirror
06. multipath
07. raid
08. snapshot
09. striped
10. verity
For rest of the targets, handle the STATUSTYPE_IMA case by setting the
measurement buffer to NULL.
For IMA to measure the data on a given system, the IMA policy on the
system needs to be updated to have the following line, and the system
needs to be restarted for the measurements to take effect.
/etc/ima/ima-policy
measure func=CRITICAL_DATA label=device-mapper template=ima-buf
The measurements will be reflected in the IMA logs, which are located at:
/sys/kernel/security/integrity/ima/ascii_runtime_measurements
/sys/kernel/security/integrity/ima/binary_runtime_measurements
These IMA logs can later be consumed by various attestation clients
running on the system, and send them to external services for attesting
the system.
The DM target data measured by IMA subsystem can alternatively
be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with
DM_TABLE_STATUS_CMD.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since commit ff9ea323816d ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures. And
pktdvd is a deprecated driver that isn't useful in stack setup
either. So remove the dead congested_fn stacking infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
