summaryrefslogtreecommitdiff
path: root/drivers/md/dm-zoned-metadata.c
AgeCommit message (Collapse)Author
2021-06-04dm zoned: check zone capacityDamien Le Moal
The dm-zoned target cannot support zoned block devices with zones that have a capacity smaller than the zone size (e.g. NVMe zoned namespaces) due to the current chunk zone mapping implementation as it is assumed that zones and chunks have the same size with all blocks usable. If a zoned drive is found to have zones with a capacity different from the zone size, fail the target initialization. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-27block: use an on-stack bio in blkdev_issue_flushChristoph Hellwig
There is no point in allocating memory for a synchronous flush. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08dm zoned: Fix zone reclaim triggerDamien Le Moal
Only triggering reclaim based on the percentage of unmapped cache zones can fail to detect cases where reclaim is needed, e.g. if the target has only 2 or 3 cache zones and only one unmapped cache zone, the percentage of free cache zones is higher than DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger. This problem, combined with the fact that dmz_schedule_reclaim() is called from dmz_handle_bio() without the map lock held, leads to a race between zone allocation and dmz_should_reclaim() result. Depending on the workload applied, this race can lead to the write path waiting forever for a free zone without reclaim being triggered. Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone() under the map lock. This results in checking the need for zone reclaim whenever a new data or buffer zone needs to be allocated. Also fix dmz_reclaim_percentage() to always return 0 if the number of unmapped cache (or random) zones is less than or equal to 1. Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-19dm zoned: Fix reclaim zone selectionShin'ichiro Kawasaki
When dm zoned has multiple devices, random zones are never selected for reclaim if all reserved sequential write zones are in use and no sequential write required zones can be selected for reclaim. This can lead to deadlocks as selecting a cache zone allows reclaiming a sequential zone, ensuring forward progress. Fix this by always defaulting to selecting a random zone when no sequential write required zone can be selected. [Damien: fix commit message] Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-19dm zoned: Fix random zone reclaim selectionDamien Le Moal
Commit 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") modified dmz_get_rnd_zone_for_reclaim() to add a search for the buffer zone with the heaviest weight as an optimal candidate for reclaim. This modification uses the zone pointer variabl "last" which is set only once and never modified as zones are scanned, resulting in the search being inefective. Furthermore, if the selected buffer zone at the end of the search loop is active or already locked for reclaim, dmz_get_rnd_zone_for_reclaim() returns NULL even if other random zones with a lesser weight can be reclaimed. To fix the search and to guarantee that reclaim can make forward progress, fix dmz_get_rnd_zone_for_reclaim() loop to correctly find the buffer zone with the heaviest weight using the variable maxw_z. Also make sure to fallback to finding the first random zone that can be reclaimed if this best candidate zone cannot be reclaimed. While at it, also fix the device index check to consider only random zones, ignoring cache zones belonging to the cache device if one is used as that device does not have a reclaim process. Fixes: 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-19dm zoned: Fix metadata zone size checkShin'ichiro Kawasaki
When dm zoned has multiple devices, metadata is on the cache device, not in random zones of the zoned devices. Then the number of metadata zones shall be checked with the number of cache zones, not random zones. Fixes: 34f5affd04c4 ("dm zoned: separate random and cache zones") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05Merge tag 'for-5.8/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - The largest change for this cycle is the DM zoned target's metadata version 2 feature that adds support for pairing regular block devices with a zoned device to ease the performance impact associated with finite random zones of zoned device. The changes came in three batches: the first prepared for and then added the ability to pair a single regular block device, the second was a batch of fixes to improve zoned's reclaim heuristic, and the third removed the limitation of only adding a single additional regular block device to allow many devices. Testing has shown linear scaling as more devices are added. - Add new emulated block size (ebs) target that emulates a smaller logical_block_size than a block device supports The primary use-case is to emulate "512e" devices that have 512 byte logical_block_size and 4KB physical_block_size. This is useful to some legacy applications that otherwise wouldn't be able to be used on 4K devices because they depend on issuing IO in 512 byte granularity. - Add discard interfaces to DM bufio. First consumer of the interface is the dm-ebs target that makes heavy use of dm-bufio. - Fix DM crypt's block queue_limits stacking to not truncate logic_block_size. - Add Documentation for DM integrity's status line. - Switch DMDEBUG from a compile time config option to instead use dynamic debug via pr_debug. - Fix DM multipath target's hueristic for how it manages "queue_if_no_path" state internally. DM multipath now avoids disabling "queue_if_no_path" unless it is actually needed (e.g. in response to configure timeout or explicit "fail_if_no_path" message). This fixes reports of spurious -EIO being reported back to userspace application during fault tolerance testing with an NVMe backend. Added various dynamic DMDEBUG messages to assist with debugging queue_if_no_path in the future. - Add a new DM multipath "Historical Service Time" Path Selector. - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error. - Improve DM writecache target performance by using explicit cache flushing for target's single-threaded usecase and a small cleanup to remove unnecessary test in persistent_memory_claim. - Other small cleanups in DM core, dm-persistent-data, and DM integrity. * tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits) dm crypt: avoid truncating the logical block size dm mpath: add DM device name to Failing/Reinstating path log messages dm mpath: enhance queue_if_no_path debugging dm mpath: restrict queue_if_no_path state machine dm mpath: simplify __must_push_back dm zoned: check superblock location dm zoned: prefer full zones for reclaim dm zoned: select reclaim zone based on device index dm zoned: allocate zone by device index dm zoned: support arbitrary number of devices dm zoned: move random and sequential zones into struct dmz_dev dm zoned: per-device reclaim dm zoned: add metadata pointer to struct dmz_dev dm zoned: add device pointer to struct dm_zone dm zoned: allocate temporary superblock for tertiary devices dm zoned: convert to xarray dm zoned: add a 'reserved' zone flag dm zoned: improve logging messages for reclaim dm zoned: avoid unnecessary device recalulation for secondary superblock dm zoned: add debugging message for reading superblocks ...
2020-06-05dm zoned: check superblock locationHannes Reinecke
When specifying several devices the superblock location must be checked to ensure the devices are specified in the correct order. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: prefer full zones for reclaimHannes Reinecke
Prefer full zones when selecting the next zone for reclaim. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: select reclaim zone based on device indexHannes Reinecke
per-device reclaim should select zones on that device only. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: allocate zone by device indexHannes Reinecke
When allocating a zone, pass in an indicator on which device the zone should be allocated; this increases performance for a multi-device setup because reclaim will now allocate zones on the device for which reclaim is running. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: support arbitrary number of devicesHannes Reinecke
Remove the hard-coded limit of two devices and support an unlimited number of additional zoned devices. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: move random and sequential zones into struct dmz_devHannes Reinecke
Random and sequential zones should be part of the respective device structure to make arbitration between devices possible. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: add metadata pointer to struct dmz_devHannes Reinecke
Add a metadata pointer within struct dmz_dev and use it as argument for blkdev_report_zones() instead of the metadata itself. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: add device pointer to struct dm_zoneHannes Reinecke
Add a pointer, to the containing device, within struct dm_zone and kill dmz_zone_to_dev(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: allocate temporary superblock for tertiary devicesHannes Reinecke
Checking the tertiary superblock just consists of validating UUIDs, crcs, and the generation number; it doesn't have contents which would be required during the actual operation. So allocate a temporary superblock when checking tertiary devices to avoid having to store it together with the 'real' superblocks. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: convert to xarrayHannes Reinecke
The zones array is getting really large, and large arrays tend to wreak havoc with the CPU caches. So convert it to xarray to become more cache friendly. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: add a 'reserved' zone flagHannes Reinecke
Instead of counting the number of reserved zones in dmz_free_zone(), mark the zone as 'reserved' during allocation and simplify dmz_free_zone(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: avoid unnecessary device recalulation for secondary superblockHannes Reinecke
The secondary superblock must reside on the same device as the primary superblock, so there is no need to re-calculate the device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-05dm zoned: add debugging message for reading superblocksHannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-22dm zoned: remove leftover hunk for switching to sequential zonesHannes Reinecke
Remove a leftover hunk to switch from random zones to sequential zones when selecting a reclaim zone; the logic has moved into the caller and this hunk is now pointless. Fixes: 34f5affd04c4 ("dm zoned: separate random and cache zones") Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-22block: remove the error_sector argument to blkdev_issue_flushChristoph Hellwig
The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-20dm zoned: terminate reclaim on congestionHannes Reinecke
When dmz_get_chunk_mapping() selects a zone which is under reclaim we should terminate the reclaim copy process. Since we're changing the zone itself, reclaim needs to run afterwards again anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: reclaim random zones when idleHannes Reinecke
When the system is idle we should be starting reclaiming random zones, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: separate random and cache zonesHannes Reinecke
Instead of lumping emulated zones together with random zones we should be handling them as separate 'cache' zones. This improves code readability and allows an easier implementation of different cache policies. Also add additional allocation flags, to separate the type (cache, random, or sequential) from the purpose (eg reclaim). Also switch the allocation policy to not use random zones as buffer zones if cache zones are present. This avoids a performance drop when all cache zones are used. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zoneHannes Reinecke
The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: metadata version 2Hannes Reinecke
Implement handling for metadata version 2. The new metadata adds a label and UUID for the device mapper device, and additional UUID for the underlying block devices. It also allows for an additional regular drive to be used for emulating random access zones. The emulated zones will be placed logically in front of the zones from the zoned block device, causing the superblocks and metadata to be stored on that device. The first zone of the original zoned device will be used to hold another, tertiary copy of the metadata; this copy carries a generation number of 0 and is never updated; it's just used for identification. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: ignore metadata zone in dmz_alloc_zone()Hannes Reinecke
When looking up zones in dmz_alloc_zone() we need to ignore metadata zones so as not to accidentally overwrite metadata. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: Reduce logging output on startupHannes Reinecke
dm-zoned is becoming quite chatty during startup; reduce the noise by moving some information to 'debug' level. Suggested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20dm zoned: add metadata logging functionsHannes Reinecke
Use the metadata label for logging and not the underlying device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-19dm zoned: use dmz_zone_to_dev() when handling metadata I/OHannes Reinecke
Use accessors to retrieve the device pointer in preparation for adding an additional block device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: Introduce dmz_dev_is_dying() and dmz_check_dev()Hannes Reinecke
Introduce accessors dmz_dev_is_dying() and dmz_check_dev() to avoid having to reference the devices directly. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: introduce dmz_metadata_label() to format device nameHannes Reinecke
Introduce dmz_metadata_label() to format the device-mapper device name and use it instead of the device name of the underlying device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: move fields from struct dmz_dev to dmz_metadataHannes Reinecke
Move fields from the device structure into the metadata structure and provide accessor functions. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: store device in struct dmz_sbHannes Reinecke
Store the device together with the superblock so that we don't have to recur to the metadata to find it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: use array for superblock zonesHannes Reinecke
Instead of storing just the first superblock zone and calculate the secondary relative to that we should be using an array for holding the superblock zones. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: store zone id within the zone structure and kill dmz_id()Hannes Reinecke
Instead of calculating the zone index by the offset within the zone array store the index within the structure itself. With that the helper dmz_id() is pointless and can be replaced with accessing the ->id value directly. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-15dm zoned: add 'status' callbackHannes Reinecke
Add callback to supply information for 'dmsetup status' and 'dmsetup table'. The output for 'dmsetup status' is 0 <size> zoned <nr_zones> zones <nr_unmap_rnd>/<nr_rnd> random <nr_unmap_seq>/<nr_seq> sequential where <nr_unmap_rnd> is the number of unmapped (ie free) random zones, <nr_rnd> the total number of random zones, <nr_unmap_seq> the number of unmapped sequential zones, and <nr_seq> the total number of sequential zones. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-24dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()Bob Liu
zmd->nr_rnd_zones was increased twice by mistake. The other place it is increased in dmz_init_zone() is the only one needed: 1131 zmd->nr_useable_zones++; 1132 if (dmz_is_rnd(zone)) { 1133 zmd->nr_rnd_zones++; ^^^ Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-01-07dm zoned: support zone sizes smaller than 128MiBDmitry Fomichev
dm-zoned is observed to log failed kernel assertions and not work correctly when operating against a device with a zone size smaller than 128MiB (e.g. 32768 bits per 4K block). The reason is that the bitmap size per zone is calculated as zero with such a small zone size. Fix this problem and also make the code related to zone bitmap management be able to handle per zone bitmaps smaller than a single block. A dm-zoned-tools patch is required to properly format dm-zoned devices with zone sizes smaller than 128MiB. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-11-25Merge tag 'for-5.5/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix DM core to disallow stacking request-based DM on partitions. - Fix DM raid target to properly resync raidset even if bitmap needed additional pages. - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the IO and crypt workqueues. - Fix DM integrity metadata layout that was aligned on 128K boundary rather than the intended 4K boundary (removes 124K of wasted space for each metadata block). - Improve the DM thin, cache and clone targets to use spin_lock_irq rather than spin_lock_irqsave where possible. - Fix DM thin single thread performance that was lost due to needless workqueue wakeups. - Fix DM zoned target performance that was lost due to excessive backing device checks. - Add ability to trigger write failure with the DM dust test target. - Fix whitespace indentation in drivers/md/Kconfig. - Various smalls fixes and cleanups (e.g. use struct_size, fix uninitialized variable, variable renames, etc). * tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues" dm: Fix Kconfig indentation dm thin: wakeup worker only when deferred bios exist dm integrity: fix excessive alignment of metadata runs dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout dm zoned: reduce overhead of backing device checks dm dust: add limited write failure mode dm dust: change ret to r in dust_map_read and dust_map dm dust: change result vars to r dm cache: replace spin_lock_irqsave with spin_lock_irq dm bio prison: replace spin_lock_irqsave with spin_lock_irq dm thin: replace spin_lock_irqsave with spin_lock_irq dm clone: add bucket_lock_irq/bucket_unlock_irq helpers dm clone: replace spin_lock_irqsave with spin_lock_irq dm writecache: handle REQ_FUA dm writecache: fix uninitialized variable warning dm stripe: use struct_size() in kmalloc() dm raid: streamline rs_get_progress() and its raid_status() caller side dm raid: simplify rs_setup_recovery call chain dm raid: to ensure resynchronization, perform raid set grow in preresume ...
2019-11-12block: rework zone reportingChristoph Hellwig
Avoid the need to allocate a potentially large array of struct blk_zone in the block layer by switching the ->report_zones method interface to a callback model. Now the caller simply supplies a callback that is executed on each reported zone, and private data for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07dm zoned: reduce overhead of backing device checksDmitry Fomichev
Commit 75d66ffb48efb3 added backing device health checks and as a part of these checks, check_events() block ops template call is invoked in dm-zoned mapping path as well as in reclaim and flush path. Calling check_events() with ATA or SCSI backing devices introduces a blocking scsi_test_unit_ready() call being made in sd_check_events(). Even though the overhead of calling scsi_test_unit_ready() is small for ATA zoned devices, it is much larger for SCSI and it affects performance in a very negative way. Fix this performance regression by executing check_events() only in case of any I/O errors. The function dmz_bdev_is_dying() is modified to call only blk_queue_dying(), while calls to check_events() are made in a new helper function, dmz_check_bdev(). Reported-by: zhangxiaoxu <zhangxiaoxu5@huawei.com> Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-11-07block: add zone open, close and finish operationsAjay Joshi
Zoned block devices (ZBC and ZAC devices) allow an explicit control over the condition (state) of zones. The operations allowed are: * Open a zone: Transition to open condition to indicate that a zone will actively be written * Close a zone: Transition to closed condition to release the drive resources used for writing to a zone * Finish a zone: Transition an open or closed zone to the full condition to prevent write operations To enable this control for in-kernel zoned block device users, define the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH as well as the generic function blkdev_zone_mgmt() for submitting these operations on a range of zones. This results in blkdev_reset_zones() removal and replacement with this new zone magement function. Users of blkdev_reset_zones() (f2fs and dm-zoned) are updated accordingly. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-21dm zoned: fix potential NULL dereference in dmz_do_reclaim()Dan Carpenter
This function is supposed to return error pointers so it matches the dmz_get_rnd_zone_for_reclaim() function. The current code could lead to a NULL dereference in dmz_do_reclaim() Fixes: b234c6d7a703 ("dm zoned: improve error handling in reclaim") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: fix a few typosDmitry Fomichev
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: add SPDX license identifiersDmitry Fomichev
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: properly handle backing device failureDmitry Fomichev
dm-zoned is observed to lock up or livelock in case of hardware failure or some misconfiguration of the backing zoned device. This patch adds a new dm-zoned target function that checks the status of the backing device. If the request queue of the backing device is found to be in dying state or the SCSI backing device enters offline state, the health check code sets a dm-zoned target flag prompting all further incoming I/O to be rejected. In order to detect backing device failures timely, this new function is called in the request mapping path, at the beginning of every reclaim run and before performing any metadata I/O. The proper way out of this situation is to do dmsetup remove <dm-zoned target> and recreate the target when the problem with the backing device is resolved. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: improve error handling in reclaimDmitry Fomichev
There are several places in reclaim code where errors are not propagated to the main function, dmz_reclaim(). This function is responsible for unlocking zones that might be still locked at the end of any failed reclaim iterations. As the result, some device zones may be left permanently locked for reclaim, degrading target's capability to reclaim zones. This patch fixes these issues as follows - Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and dmz_reclaim_rnd_data() return error codes to the caller. dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid clashing with "struct dmz_reclaim" and is modified to return the error to the caller. dmz_get_zone_for_reclaim() now returns an error instead of NULL pointer and reclaim code checks for that error. Error logging/debug messages are added where necessary. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-18Merge tag 'for-5.3/dm-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull more device mapper updates from Mike Snitzer: - Fix zone state management race in DM zoned target by eliminating the unnecessary DMZ_ACTIVE state. - A couple fixes for issues the DM snapshot target's optional discard support added during first week of the 5.3 merge. - Increase default size of outstanding IO that is allowed for a each dm-kcopyd client and introduce tunable to allow user adjust. - Update DM core to use printk ratelimiting functions rather than duplicate them and in doing so fix an issue where DMDEBUG_LIMIT() rate limited KERN_DEBUG messages had excessive "callbacks suppressed" messages. * tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: use printk ratelimiting functions dm kcopyd: Increase default sub-job size to 512KB dm snapshot: fix oversights in optional discard support dm zoned: fix zone state management race