| Age | Commit message (Collapse) | Author |
|---|
|
This adds support to obtain a device's unique id through dm, similar to the
existing ioctl and persistent resevation handling. We limit this to
single-target devices.
This enables knfsd to export pNFS SCSI luns that have been exported from
multipath devices.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
dm_set_md_type() has been unused since commit
ba30585936b0 ("dm: move setting md->type into dm_setup_md_queue")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
If blk_alloc_disk fails, the variable md->disk is set to an error value.
cleanup_mapped_device will see that md->disk is non-NULL and it will
attempt to access it, causing a crash on this statement
"md->disk->private_data = NULL;".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://marc.info/?l=dm-devel&m=172824125004329&w=2
Cc: stable@vger.kernel.org
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
|
|
This reverts commit fa247089de9936a46e290d4724cb5f0b845600f5.
The following sequence of commands causes a livelock - there will be
workqueue process looping and consuming 100% CPU:
dmsetup create --notable test
truncate -s 1MiB testdata
losetup /dev/loop0 testdata
dmsetup load test --table '0 2048 linear /dev/loop0 0'
dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync
The livelock is caused by the commit fa247089de99. The commit claims that
it fixes a race condition, however, it is unknown what the actual race
condition is and what program is involved in the race condition.
When the inactive table is loaded, the nodes /dev/dm-0 and
/sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When
the device is suspended and resumed, the nodes /dev/mapper/test and
/dev/disk/* are created.
If some program opens a block device before it is created by dmsetup or
lvm, the program is buggy, so dm could just report an error as it used to
do before.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
|
|
This commit changes device mapper, so that it returns -ERESTARTSYS
instead of -EINTR when it is interrupted by a signal (so that the ioctl
can be restarted).
The manpage signal(7) says that the ioctl function should be restarted if
the signal was handled with SA_RESTART.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Pull block integrity mapping updates from Jens Axboe:
"A set of cleanups and fixes for the block integrity support.
Sent separately from the main block changes from last week, as they
depended on later fixes in the 6.10-rc cycle"
* tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux:
block: don't free the integrity payload in bio_integrity_unmap_free_user
block: don't free submitter owned integrity payload on I/O completion
block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
block: don't call bio_uninit from bio_endio
block: also return bio_integrity_payload * from stubs
block: split integrity support out of bio.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- Optimize processing of flush bios in the dm-linear and dm-stripe
targets
- Dm-io cleansups and refactoring
- Remove unused 'struct thunk' in dm-cache
- Handle minor device numbers > 255 in dm-init
- Dm-verity refactoring & enabling platform keyring
- Fix warning in dm-raid
- Improve dm-crypt performance - split bios to smaller pieces, so that
They could be processed concurrently
- Stop using blk_limits_io_{min,opt}
- Dm-vdo cleanup and refactoring
- Remove max_write_zeroes_granularity and max_secure_erase_granularity
- Dm-multipath cleanup & refactoring
- Add dm-crypt and dm-integrity support for non-power-of-2 sector size
- Fix reshape in dm-raid
- Make dm_block_validator const
* tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (33 commits)
dm vdo: fix a minor formatting issue in vdo.rst
dm vdo int-map: fix kerneldoc formatting
dm vdo repair: add missing kerneldoc fields
dm: Constify struct dm_block_validator
dm-integrity: introduce the Inline mode
dm: introduce the target flag mempool_needs_integrity
dm raid: fix stripes adding reshape size issues
dm raid: move _get_reshape_sectors() as prerequisite to fixing reshape size issues
dm-crypt: support for per-sector NVMe metadata
dm mpath: don't call dm_get_device in multipath_message
dm: factor out helper function from dm_get_device
dm-verity: fix dm_is_verity_target() when dm-verity is builtin
dm: Remove max_secure_erase_granularity
dm: Remove max_write_zeroes_granularity
dm vdo indexer: use swap() instead of open coding it
dm vdo: remove unused struct 'uds_attribute'
dm: stop using blk_limits_io_{min,opt}
dm-crypt: limit the size of encryption requests
dm verity: add support for signature verification with platform keyring
dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
...
|
|
The max_secure_erase_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The max_write_zeroes_granularity boolean of struct dm_target is used in
__process_abnormal_io() but never set by any target. Remove this field
and the dead code using it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This commit implements processing of the REQ_OP_ZONE_RESET_ALL operation
for zoned mapped devices. Given that this operation always has a BIO
sector of 0 and a 0 size, processing through the regular BIO
__split_and_process_bio() function does not work because this function
would always select the first target. Instead, handling of this
operation is implemented using the function __send_zone_reset_all().
Similarly to the __send_empty_flush() function, the new
__send_zone_reset_all() function manually goes through all targets of a
mapped device table doing the following:
1) If the target can natively support REQ_OP_ZONE_RESET_ALL,
__send_duplicate_bios() is used to forward the reset all operation to
the target. This case is handled with the
__send_zone_reset_all_native() function.
2) For other targets, the function __send_zone_reset_all_emulated() is
executed to emulate the execution of REQ_OP_ZONE_RESET_ALL using
regular REQ_OP_ZONE_RESET operations.
Targets that can natively support REQ_OP_ZONE_RESET_ALL are identified
using the new target field zone_reset_all_supported. This boolean is set
to true in for targets that have reliable zone limits, that is, targets
that map all sequential write required zones of their zoned device(s).
Setting this field is handled in dm_set_zones_restrictions() and
device_get_zone_resource_limits().
For targets with unreliable zone limits, REQ_OP_ZONE_RESET_ALL must be
emulated (case 2 above). This is implemented with
__send_zone_reset_all_emulated() and is similar to the block layer
function blkdev_zone_reset_all_emulated(): first a report zones is done
for the zones of the target to identify zones that need reset, that is,
any sequential write required zone that is not already empty. This is
done using a bitmap and the function dm_zone_get_reset_bitmap() which
sets to 1 the bit corresponding to a zone that needs reset. Next, this
zone bitmap is inspected and a clone BIO modified to use the
REQ_OP_ZONE_RESET operation issued for any zone with its bit set in the
zone bitmap.
This implementation is more efficient than what the block layer does
with blkdev_zone_reset_all_emulated(), which is always used for DM zoned
devices currently: as we can natively use REQ_OP_ZONE_RESET_ALL on
targets mapping all sequential write required zones, resetting all zones
of a zoned mapped device can be much faster compared to always emulating
this operation using regular per-zone reset. In the worst case, this
implementation is as-efficient as the block layer emulation. This
reduction in the time it takes to reset all zones of a zoned mapped
device depends directly on the mapped device targets mapping (reliable
zone limits or not).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a single switch-case to simplify is_abnormal_io() and make this
function more readable and easier to modify.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split struct bio_integrity_payload and the related prototypes out of
bio.h into a separate bio-integrity.h header so that it is only pulled
in by the few places that need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Device mapper sends flush bios to all the targets and the targets send it
to the underlying device. That may be inefficient, for example if a table
contains 10 linear targets pointing to the same physical device, then
device mapper would send 10 flush bios to that device - despite the fact
that only one bio would be sufficient.
This commit optimizes the flush behavior. It introduces a per-target
variable flush_bypasses_map - it is set when the target supports flush
optimization - currently, the dm-linear and dm-stripe targets support it.
When all the targets in a table have flush_bypasses_map,
flush_bypasses_map on the table is set. __send_empty_flush tests if the
table has flush_bypasses_map - and if it has, no flush bios are sent to
the targets via the "map" method and the list dm_table->devices is
iterated and the flush bios are sent to each member of the list.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Suggested-by: Yang Yang <yang.yang@vivo.com>
|
|
The purpose of the chunk_sectors limit is to ensure that a mergeble request
fits within the boundary of the chunck_sector value.
Such a feature will be useful for other request_queue boundary limits, so
generalize the chunk_sectors merge code.
This idea was proposed by Hannes Reinecke.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the io_stat flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Simplify md and dm to set the flag unconditionally instead of avoiding
setting a simple flag for cases where it already is set by other means,
which is a bit pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM discard regressions due to DM core switching over to using
queue_limits_set() without DM core and targets first being updated to
set (and stack) discard limits in terms of max_hw_discard_sectors and
not max_discard_sectors
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size
* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always manage discard support in terms of max_hw_discard_sectors
dm-integrity: set discard_granularity to logical block size
|
|
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Since commit 1c0e720228ad ("dm: use queue_limits_set") it was reported
dm-thinp was failing in a few fstests (generic/347 and generic/405)
with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being
reported, e.g.:
WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50
blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX,
so given how block core now sets max_discard_sectors (detailed above)
it follows that blk_stack_limits() stacks up the underlying device's
max_hw_discard_sectors and max_discard_sectors is set to match it. If
max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then
dm_cell_key_has_valid_range() will trigger the warning with:
WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE)
Aside from this warning, the discard will fail. Fix this and other DM
issues by governing discard support in terms of max_hw_discard_sectors
instead of max_discard_sectors.
Reported-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 1c0e720228ad ("dm: use queue_limits_set")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
|
|
For targets requiring zone append operation emulation with regular
writes (e.g. dm-crypt), we can use the block layer emulation provided by
zone write plugging. Remove DM implemented zone append emulation and
enable the block layer one.
This is done by setting the max_zone_append_sectors limit of the
mapped device queue to 0 for mapped devices that have a target table
that cannot support native zone append operations (e.g. dm-crypt).
Such mapped devices are flagged with the DMF_EMULATE_ZONE_APPEND flag.
dm_split_and_process_bio() is modified to execute
blk_zone_write_plug_bio() for such device to let the block layer
transform zone append operations into regular writes. This is done
after ensuring that the submitted BIO is split if it straddles zone
boundaries. Both changes are implemented unsing the inline helpers
dm_zone_write_plug_bio() and dm_zone_bio_needs_split() respectively.
dm_revalidate_zones() is also modified to use the block layer provided
function blk_revalidate_disk_zones() so that all zone resources needed
for zone append emulation are initialized by the block layer without DM
core needing to do anything. Since the device table is not yet live when
dm_revalidate_zones() is executed, enabling the use of
blk_revalidate_disk_zones() requires adding a pointer to the device
table in struct mapped_device. This avoids errors in
dm_blk_report_zones() trying to get the table with dm_get_live_table().
The mapped device table pointer is set to the table passed as argument
to dm_revalidate_zones() before calling blk_revalidate_disk_zones() and
reset to NULL after this function returns to restore the live table
handling for user call of report zones.
All the code related to zone append emulation is removed from
dm-zone.c. This leads to simplifications of the functions __map_bio()
and dm_zone_endio(). This later function now only needs to deal with
completions of real zone append operations for targets that support it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'dmsetup remove' and 'dmsetup remove_all' require synchronous bdev
release. Otherwise dm_lock_for_deletion() may return -EBUSY if the open
count is > 0, because the open count is dropped in dm_blk_close()
which occurs after fput() completes.
So if dm_blk_close() is delayed because of asynchronous fput(), this
device mapper device is skipped during remove, which is a regression.
Fix the issue by using __fput_sync().
Also, DM device removal has long supported being made asynchronous by
setting the DMF_DEFERRED_REMOVE flag on the DM device. So leverage
using async fput() in close_table_device() if DMF_DEFERRED_REMOVE flag
is set.
Reported-by: Zhong Changhui <czhong@redhat.com>
Fixes: a28d893eb327 ("md: port block device access to file")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: editted commit header, use fput() if DMF_DEFERRED_REMOVE set]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's IO submission (which include dm-io and dm-bufio) such
that a bio's IO priority is propagated. Work focused on enabling both
DM crypt and verity targets to retain the appropriate IO priority
- Fix DM raid reshape logic to not allow an empty flush bio to be
requeued due to false concern about the bio, which doesn't have a
data payload, accessing beyond the end of the device
- Fix DM core's internal resume so that it properly calls both presume
and resume methods, which fixes the potential for a postsuspend and
resume imbalance
- Update DM verity target to set DM_TARGET_SINGLETON flag because it
doesn't make sense to have a DM table with a mix of targets that
include dm-verity
- Small cleanups in DM crypt, thin, and integrity targets
- Fix references to dm-devel mailing list to use latest list address
* tag 'for-6.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: call the resume method on internal suspend
dm raid: fix false positive for requeue needed during reshape
dm-integrity: set max_integrity_segments in dm_integrity_io_hints
dm: update relevant MODULE_AUTHOR entries to latest dm-devel mailing list
dm ioctl: update DM_DRIVER_EMAIL to new dm-devel mailing list
dm verity: set DM_TARGET_SINGLETON feature flag
dm crypt: Fix IO priority lost when queuing write bios
dm verity: Fix IO priority lost when reading FEC and hash
dm bufio: Support IO priority
dm io: Support IO priority
dm crypt: remove redundant state settings after waking up
dm thin: add braces around conditional code that spans lines
|
|
There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.
Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.
If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
<TASK>
? die+0x2d/0x80
? do_trap+0xeb/0xf0
? __list_del_entry_valid_or_report+0x77/0xc0
? do_error_trap+0x60/0x80
? __list_del_entry_valid_or_report+0x77/0xc0
? exc_invalid_op+0x49/0x60
? __list_del_entry_valid_or_report+0x77/0xc0
? asm_exc_invalid_op+0x16/0x20
? table_deps+0x1b0/0x1b0 [dm_mod]
? __list_del_entry_valid_or_report+0x77/0xc0
origin_postsuspend+0x1a/0x50 [dm_snapshot]
dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
dm_suspend+0xd8/0xf0 [dm_mod]
dev_suspend+0x1f2/0x2f0 [dm_mod]
? table_deps+0x1b0/0x1b0 [dm_mod]
ctl_ioctl+0x300/0x5f0 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
__x64_compat_sys_ioctl+0x104/0x170
do_syscall_64+0x184/0x1b0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---
Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-4-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of dm alloc_dev()
to treat alloc_dax() -EOPNOTSUPP failure as non-fatal.
Link: https://lkml.kernel.org/r/20240215144633.96437-5-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also change blk_alloc_disk to return an ERR_PTR instead of just NULL
which can't distinguish errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:
* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()
Also document the return code.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM core to directly call the map function for both the linear
and stripe targets; which are provided by DM core
- Various updates to use new safer string functions
- Update DM core to respect REQ_NOWAIT flag in normal bios so that
memory allocations are always attempted with GFP_NOWAIT
- Add Mikulas Patocka to MAINTAINERS as a DM maintainer!
- Improve DM delay target's handling of short delays (< 50ms) by using
a kthread to check expiration of IOs rather than timers and a wq
- Update the DM error target so that it works with zoned storage. This
helps xfstests to provide proper IO error handling coverage when
testing a filesystem with native zoned storage support
- Update both DM crypt and integrity targets to improve performance by
using crypto_shash_digest() rather than init+update+final sequence
- Fix DM crypt target by backfilling missing memory allocation
accounting for compound pages
* tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: account large pages in cc->n_allocated_pages
dm integrity: use crypto_shash_digest() in sb_mac()
dm crypt: use crypto_shash_digest() in crypt_iv_tcw_whitening()
dm error: Add support for zoned block devices
dm delay: for short delays, use kthread instead of timers and wq
MAINTAINERS: add Mikulas Patocka as a DM maintainer
dm: respect REQ_NOWAIT flag in normal bios issued to DM
dm: enhance alloc_multiple_bios() to be more versatile
dm: make __send_duplicate_bios return unsigned int
dm log userspace: replace deprecated strncpy with strscpy
dm ioctl: replace deprecated strncpy with strscpy_pad
dm crypt: replace open-coded kmemdup_nul
dm cache metadata: replace deprecated strncpy with strscpy
dm: shortcut the calls to linear_map and stripe_map
|
|
Convert device mapper to use bdev_open_by_dev() and pass the handle
around.
CC: Alasdair Kergon <agk@redhat.com>
CC: Mike Snitzer <snitzer@kernel.org>
CC: dm-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-10-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update DM core's normal IO submission to allocate required memory
using GFP_NOWAIT if REQ_NOWAIT is set.
Tested with simple test provided in commit a9ce385344f916 ("dm: don't
attempt to queue IO under RCU protection") that was enhanced to check
error codes. Also tested using fio's pvsync2 with nowait=1.
But testing with induced GFP_NOWAIT allocation failures wasn't
performed (yet).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
alloc_multiple_bios() has the useful ability to try allocating bios
with GFP_NOWAIT but will fallback to using GFP_NOIO. The callers
service both empty flush bios and abnormal bios (e.g. discard).
alloc_multiple_bios() enhancements offered in this commit:
- don't require table_devices_lock if num_bios = 1
- allow caller to pass GFP_NOWAIT to do usual GFP_NOWAIT with GFP_NOIO
fallback
- allow caller to pass GFP_NOIO to _only_ allocate using GFP_NOIO
Flush bios with data may be issued to DM with REQ_NOWAIT, as such it
makes sense to attempt servicing them with GFP_NOWAIT allocations.
But abnormal IO should never be issued using REQ_NOWAIT (if that
changes in the future that's fine, but no sense supporting it now).
While at it, rename __send_changing_extent_only() to
__send_abnormal_io().
[Thanks to both Ming and Mikulas for help with translating known
possible IO scenarios to requirements.]
Suggested-by: Ming Lei <ming.lei@redhat.com>
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
All the callers cast the value returned by __send_duplicate_bios to
unsigned int type, so we can return unsigned int as well.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Shortcut the calls to linear_map and stripe_map, so that they don't suffer
the overhead of retpolines used for indirect calls.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm looks up the table for IO based on the request type, with an
assumption that if the request is marked REQ_NOWAIT, it's fine to
attempt to submit that IO while under RCU read lock protection. This
is not OK, as REQ_NOWAIT just means that we should not be sleeping
waiting on other IO, it does not mean that we can't potentially
schedule.
A simple test case demonstrates this quite nicely:
int main(int argc, char *argv[])
{
struct iovec iov;
int fd;
fd = open("/dev/dm-0", O_RDONLY | O_DIRECT);
posix_memalign(&iov.iov_base, 4096, 4096);
iov.iov_len = 4096;
preadv2(fd, &iov, 1, 0, RWF_NOWAIT);
return 0;
}
which will instantly spew:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x11d/0x1b0
__might_resched+0x3c3/0x5e0
? preempt_count_sub+0x150/0x150
mempool_alloc+0x1e2/0x390
? mempool_resize+0x7d0/0x7d0
? lock_sync+0x190/0x190
? lock_release+0x4b7/0x670
? internal_get_user_pages_fast+0x868/0x2d40
bio_alloc_bioset+0x417/0x8c0
? bvec_alloc+0x200/0x200
? internal_get_user_pages_fast+0xb8c/0x2d40
bio_alloc_clone+0x53/0x100
dm_submit_bio+0x27f/0x1a20
? lock_release+0x4b7/0x670
? blk_try_enter_queue+0x1a0/0x4d0
? dm_dax_direct_access+0x260/0x260
? rcu_is_watching+0x12/0xb0
? blk_try_enter_queue+0x1cc/0x4d0
__submit_bio+0x239/0x310
? __bio_queue_enter+0x700/0x700
? kvm_clock_get_cycles+0x40/0x60
? ktime_get+0x285/0x470
submit_bio_noacct_nocheck+0x4d9/0xb80
? should_fail_request+0x80/0x80
? preempt_count_sub+0x150/0x150
? lock_release+0x4b7/0x670
? __bio_add_page+0x143/0x2d0
? iov_iter_revert+0x27/0x360
submit_bio_noacct+0x53e/0x1b30
submit_bio_wait+0x10a/0x230
? submit_bio_wait_endio+0x40/0x40
__blkdev_direct_IO_simple+0x4f8/0x780
? blkdev_bio_end_io+0x4c0/0x4c0
? stack_trace_save+0x90/0xc0
? __bio_clone+0x3c0/0x3c0
? lock_release+0x4b7/0x670
? lock_sync+0x190/0x190
? atime_needs_update+0x3bf/0x7e0
? timestamp_truncate+0x21b/0x2d0
? inode_owner_or_capable+0x240/0x240
blkdev_direct_IO.part.0+0x84a/0x1810
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
? blkdev_read_iter+0x40d/0x530
? reacquire_held_locks+0x4e0/0x4e0
? __blkdev_direct_IO_simple+0x780/0x780
? rcu_is_watching+0x12/0xb0
? __mark_inode_dirty+0x297/0xd50
? preempt_count_add+0x72/0x140
blkdev_read_iter+0x2a4/0x530
do_iter_readv_writev+0x2f2/0x3c0
? generic_copy_file_range+0x1d0/0x1d0
? fsnotify_perm.part.0+0x25d/0x630
? security_file_permission+0xd8/0x100
do_iter_read+0x31b/0x880
? import_iovec+0x10b/0x140
vfs_readv+0x12d/0x1a0
? vfs_iter_read+0xb0/0xb0
? rcu_is_watching+0x12/0xb0
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
do_preadv+0x1b3/0x260
? do_readv+0x370/0x370
__x64_sys_preadv2+0xef/0x150
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5af41ad806
Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55
RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806
RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003
RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001
</TASK>
where in fact it is dm itself that attempts to allocate a bio clone with
GFP_NOIO under the rcu read lock, regardless of the request type.
Fix this by getting rid of the special casing for REQ_NOWAIT, and just
use the normal SRCU protected table lookup. Get rid of the bio based
table locking helpers at the same time, as they are now unused.
Cc: stable@vger.kernel.org
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM crypt to allocate compound pages if possible
- Fix DM crypt target's crypt_ctr_cipher_new return value on invalid
AEAD cipher
- Fix DM flakey testing target's write bio corruption feature to
corrupt the data of a cloned bio instead of the original
- Add random_read_corrupt and random_write_corrupt features to DM
flakey target
- Fix ABBA deadlock in DM thin metadata by resetting associated bufio
client rather than destroying and recreating it
- A couple other small DM thinp cleanups
- Update DM core to support disabling block core IO stats accounting
and optimize away code that isn't needed if stats are disabled
- Other small DM core cleanups
- Improve DM integrity target to not require so much memory on 32 bit
systems. Also only allocate the recalculate buffer as needed (and
increasingly reduce its size on allocation failure)
- Update DM integrity to use %*ph for printing hexdump of a small
buffer. Also update DM integrity documentation
- Various DM core ioctl interface hardening. Now more careful about
alignment of structures and processing of input passed to the kernel
from userspace.
Also disallow the creation of DM devices named "control", "." or ".."
- Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM
core's ioctl and bufio code
* tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc
dm integrity: scale down the recalculate buffer if memory allocation fails
dm integrity: only allocate recalculate buffer when needed
dm integrity: reduce vmalloc space footprint on 32-bit architectures
dm ioctl: Refuse to create device named "." or ".."
dm ioctl: Refuse to create device named "control"
dm ioctl: Avoid double-fetch of version
dm ioctl: structs and parameter strings must not overlap
dm ioctl: Avoid pointer arithmetic overflow
dm ioctl: Check dm_target_spec is sufficiently aligned
Documentation: dm-integrity: Document an example of how the tunables relate.
Documentation: dm-integrity: Document default values.
Documentation: dm-integrity: Document the meaning of "buffer".
Documentation: dm-integrity: Fix minor grammatical error.
dm integrity: Use %*ph for printing hexdump of a small buffer
dm thin: disable discards for thin-pool if no_discard_passdown
dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h
dm: skip dm-stats work in alloc_io() unless needed
dm: avoid needless dm_io access if all IO accounting is disabled
dm: support turning off block-core's io stats accounting
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
Don't dm_stats_record_start() if dm_stats_used() is false.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Update dm_io_acct() to eliminate most dm_io struct accesses if both
block core's IO stats and dm-stats are disabled.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit bc58ba9468d9 ("block: add sysfs file for controlling io stats
accounting") allowed users to turn off disk stat accounting completely
by checking if queue flag QUEUE_FLAG_IO_STAT is set. In dm, this flag
is neither set nor checked: so block-core's io stats are continuously
counted and cannot be turned off.
Add support for turning off block-core's io stats accounting for dm.
Set QUEUE_FLAG_IO_STAT for dm's request_queue. If QUEUE_FLAG_IO_STAT
is set when an io starts, record the need for block core's io stats by
setting the DM_IO_BLK_STAT dm_io flag to avoid io stats being disabled
in the middle of the io.
DM statistics (dm-stats) is independent of block-core's io stats and
remains unchanged.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Split abnormal IO in terms of the corresponding operation specific
max_sectors (max_discard_sectors, max_secure_erase_sectors or
max_write_zeroes_sectors).
This fixes a significant dm-thinp discard performance regression that
was introduced with commit e2dd8aca2d76 ("dm bio prison v1: improve
concurrent IO performance"). Relative to discard: max_discard_sectors
is used instead of max_sectors; which fixes excessive discard splitting
(e.g. max_sectors=128K vs max_discard_sectors=64M).
Tested by discarding an 1 Petabyte dm-thin device:
lvcreate -V 1125899906842624B -T test/pool -n thin
time blkdiscard /dev/test/thin
Before this fix (splitting discards every 128K): ~116m
After this fix (splitting discards every 64M) : 0m33.460s
Reported-by: Zorro Lang <zlang@redhat.com>
Fixes: 06961c487a33 ("dm: split discards further if target sets max_discard_granularity")
Requires: 13f6facf3fae ("dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE")
Fixes: e2dd8aca2d76 ("dm bio prison v1: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().
This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().
Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mode argument to the ->release block_device_operation is never used,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
