summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)Author
2019-06-18md: fix for divide error in status_resyncMariusz Tkaczyk
Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%). The real problem occurs here after commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0. Check if db value can be really counted and replace these macro by div64_u64() inline. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-06-13bcache: only set BCACHE_DEV_WB_RUNNING when cached device attachedColy Li
When people set a writeback percent via sysfs file, /sys/block/bcache<N>/bcache/writeback_percent current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags and schedules kworker dc->writeback_rate_update. If there is no cache set attached to, the writeback kernel thread is not running indeed, running dc->writeback_rate_update does not make sense and may cause NULL pointer deference when reference cache set pointer inside update_writeback_rate(). This patch checks whether the cache set point (dc->disk.c) is NULL in sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and schedule dc->writeback_rate_update when dc->disk.c is not NULL (it means the cache device is attached to a cache set). This problem might be introduced from initial bcache commit, but commit 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0' to indicate from which commit this patch can be applied. Fixes: 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13bcache: fix stack corruption by PRECEDING_KEY()Coly Li
Recently people report bcache code compiled with gcc9 is broken, one of the buggy behavior I observe is that two adjacent 4KB I/Os should merge into one but they don't. Finally it turns out to be a stack corruption caused by macro PRECEDING_KEY(). See how PRECEDING_KEY() is defined in bset.h, 437 #define PRECEDING_KEY(_k) \ 438 ({ \ 439 struct bkey *_ret = NULL; \ 440 \ 441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \ 442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \ 443 \ 444 if (!_ret->low) \ 445 _ret->high--; \ 446 _ret->low--; \ 447 } \ 448 \ 449 _ret; \ 450 }) At line 442, _ret points to address of a on-stack variable combined by KEY(), the life range of this on-stack variable is in line 442-446, once _ret is returned to bch_btree_insert_key(), the returned address points to an invalid stack address and this address is overwritten in the following called bch_btree_iter_init(). Then argument 'search' of bch_btree_iter_init() points to some address inside stackframe of bch_btree_iter_init(), exact address depends on how the compiler allocates stack space. Now the stack is corrupted. Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl> Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Tested-by: Pierre JUHEN <pierre.juhen@orange.fr> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25Merge tag 'libnvdimm-fixes-5.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Fix a regression that disabled device-mapper dax support - Remove unnecessary hardened-user-copy overhead (>30%) for dax read(2)/write(2). - Fix some compilation warnings. * tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead dax: Arrange for dax_supported check to span multiple devices libnvdimm: Fix compilation warnings with W=1
2019-05-24Merge tag 'spdx-5.2-rc2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pule more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98 ...
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 47Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version you should have received a copy of the gnu general public license for example usr src linux copying if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 20 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 45Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22Merge tag 'for-5.2/dm-fix-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix a particularly glaring oversight in a DM core commit from 5.1 that doesn't properly trim special IOs (e.g. discards) relative to corresponding target's max_io_len_target_boundary()" * tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: make sure to obey max_io_len_target_boundary
2019-05-21dm: make sure to obey max_io_len_target_boundaryMichael Lass
Commit 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface") incorrectly removed code from __send_changing_extent_only() that is required to impose a per-target IO boundary on IO that exceeds max_io_len_target_boundary(). Otherwise "special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond where allowed. Fix this by restoring the max_io_len_target_boundary() limit in __send_changing_extent_only() Fixes: 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Michael Lass <bevan@bi-co.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20dax: Arrange for dax_supported check to span multiple devicesDan Williams
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16Merge tag 'for-5.2/dm-changes-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM snapshot target's scalability by using finer grained locking. Requires some list_bl interface improvements. - Add ability for DM integrity to use a bitmap mode, that tracks regions where data and metadata are out of sync, instead of using a journal. - Improve DM thin provisioning target to not write metadata changes to disk if the thin-pool and associated thin devices are merely activated but not used. This avoids metadata corruption due to concurrent activation of thin devices across different OS instances (e.g. split brain scenarios, which ultimately would be avoided if proper device filters were used -- but not having proper filtering has proven a very common configuration mistake) - Fix missing call to path selector type->end_io in DM multipath. This fixes reported performance problems due to inaccurate path selector IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to particular path due to it seemingly being heavily used). - Fix bug in DM cache metadata's loading of its discard bitset that could lead to all cache blocks being discarded if the very first cache block was discarded (thankfully in practice the first cache block is generally in use; be it FS superblock, partition table, disk label, etc). - Add testing-only DM dust target which simulates a device that has failing sectors and/or read failures. - Fix a DM init error path reference count hang that caused boot hangs if user supplied malformed input on kernel commandline. - Fix a couple issues with DM crypt target's logging being overly verbose or lacking context. - Various other small fixes to DM init, DM multipath, DM zoned, and DM crypt. * tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits) dm: fix a couple brace coding style issues dm crypt: print device name in integrity error message dm crypt: move detailed message into debug level dm ioctl: fix hang in early create error condition dm integrity: whitespace, coding style and dead code cleanup dm integrity: implement synchronous mode for reboot handling dm integrity: handle machine reboot in bitmap mode dm integrity: add a bitmap mode dm integrity: introduce a function add_new_range_and_wait() dm integrity: allow large ranges to be described dm ingerity: pass size to dm_integrity_alloc_page_list() dm integrity: introduce rw_journal_sectors() dm integrity: update documentation dm integrity: don't report unused options dm integrity: don't check null pointer before kvfree and vfree dm integrity: correctly calculate the size of metadata area dm dust: Make dm_dust_init and dm_dust_exit static dm dust: remove redundant unsigned comparison to less than zero dm mpath: always free attached_handler_name in parse_path() dm init: fix max devices/targets checks ...
2019-05-16dm: fix a couple brace coding style issuesSheetal Singala
Signed-off-by: Sheetal Singala <2396sheetal@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-16dm crypt: print device name in integrity error messageMilan Broz
This message should better identify the DM device with the integrity failure. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-16dm crypt: move detailed message into debug levelMilan Broz
The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-16dm ioctl: fix hang in early create error conditionHelen Koike
The dm_early_create() function (which deals with "dm-mod.create=" kernel command line option) calls dm_hash_insert() who gets an extra reference to the md object. In case of failure, this reference wasn't being released, causing dm_destroy() to hang, thus hanging the whole boot process. Fix this by calling __hash_remove() in the error path. Fixes: 6bbc923dfcf57d ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-09dm integrity: whitespace, coding style and dead code cleanupMike Snitzer
Just some things that stood out like a sore thumb. Also, converted some printk(KERN_CRIT, ...) to DMCRIT(...) Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-08dm integrity: implement synchronous mode for reboot handlingMikulas Patocka
Unfortunatelly, there may be bios coming even after the reboot notifier was called. We don't want these bios to make the bitmap dirty again. To address this, implement a synchronous mode - when a bio is about to be terminated, we clean the bitmap and terminate the bio after the clean operation succeeds. This obviously slows down bio processing, but it makes sure that when all bios are finished, the bitmap will be clean. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-08dm integrity: handle machine reboot in bitmap modeMikulas Patocka
When in bitmap mode the bitmap must be cleared when rebooting. This commit adds the reboot hook. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-08dm integrity: add a bitmap modeMikulas Patocka
Introduce an alternate mode of operation where dm-integrity uses a bitmap instead of a journal. If a bit in the bitmap is 1, the corresponding region's data and integrity tags are not synchronized - if the machine crashes, the unsynchronized regions will be recalculated. The bitmap mode is faster than the journal mode, because we don't have to write the data twice, but it is also less reliable, because if data corruption happens when the machine crashes, it may not be detected. Benchmark results for an SSD connected to a SATA300 port, when doing large linear writes with dd: buffered I/O: raw device throughput - 245MB/s dm-integrity with journaling - 120MB/s dm-integrity with bitmap - 238MB/s direct I/O with 1MB block size: raw device throughput - 248MB/s dm-integrity with journaling - 123MB/s dm-integrity with bitmap - 223MB/s For more info see dm-integrity in Documentation/device-mapper/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-08dm integrity: introduce a function add_new_range_and_wait()Mikulas Patocka
Introduce a function add_new_range_and_wait() in order to avoid repetitive code. It will be used in the following commit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-07dm integrity: allow large ranges to be describedMikulas Patocka
Change n_sectors data type from unsigned to sector_t. Following commits will need to lock large ranges. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm ingerity: pass size to dm_integrity_alloc_page_list()Mikulas Patocka
Pass size to dm_integrity_alloc_page_list(). This is needed so following commits can pass a size that is different from ic->journal_pages. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm integrity: introduce rw_journal_sectors()Mikulas Patocka
Introduce a function rw_journal_sectors() that takes sector and length as its arguments instead of a section and the number of sections. This functions will be used in further patches. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm integrity: update documentationMikulas Patocka
Update documentation with the "meta_device" parameter and flags. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm integrity: don't report unused optionsMikulas Patocka
If we are not journaling, don't report journaling options in the table status. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm integrity: don't check null pointer before kvfree and vfreeMikulas Patocka
The functions kfree, vfree and kvfree do nothing if we pass a NULL pointer to them. So we don't need to test the pointer for NULL. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm integrity: correctly calculate the size of metadata areaMikulas Patocka
When we use separate devices for data and metadata, dm-integrity would incorrectly calculate the size of the metadata device as if it had 512-byte block size - and it would refuse activation with larger block size and smaller metadata device. Fix this so that it takes actual block size into account, which fixes the following reported issue: https://gitlab.com/cryptsetup/cryptsetup/issues/450 Fixes: 356d9d52e122 ("dm integrity: allow separate metadata device") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm dust: Make dm_dust_init and dm_dust_exit staticYueHaibing
Fix sparse warnings: drivers/md/dm-dust.c:495:12: warning: symbol 'dm_dust_init' was not declared. Should it be static? drivers/md/dm-dust.c:505:13: warning: symbol 'dm_dust_exit' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07dm dust: remove redundant unsigned comparison to less than zeroColin Ian King
Variable block is an unsigned long long hence the less than zero comparison is always false, hence it is redundant and can be removed. Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bryan Gurney <bgurney@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-06Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-01bcache: make is_discard_enabled() staticJens Axboe
It's not used outside this file. Fixes: 631207314d88 ("bcache: fix failure in journal relplay") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30dm mpath: always free attached_handler_name in parse_path()Martin Wilck
Commit b592211c33f7 ("dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer") fixed a memory leak for the case where setup_scsi_dh() returns failure. But setup_scsi_dh may return success and not "use" attached_handler_name if the retain_attached_hwhandler flag is not set on the map. As setup_scsi_sh properly "steals" the pointer by nullifying it, freeing it unconditionally in parse_path() is safe. Fixes: b592211c33f7 ("dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer") Cc: stable@vger.kernel.org Reported-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-30dm init: fix max devices/targets checksHelen Koike
dm-init should allow up to DM_MAX_{DEVICES,TARGETS} for devices/targets, and not DM_MAX_{DEVICES,TARGETS} - 1. Fix the checks and also fix the error message when the number of devices is surpassed. Fixes: 6bbc923dfcf57d ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-30dm: add dust targetBryan Gurney
Add the dm-dust target, which simulates the behavior of bad sectors at arbitrary locations, and the ability to enable the emulation of the read failures at an arbitrary time. This target behaves similarly to a linear target. At a given time, the user can send a message to the target to start failing read requests on specific blocks. When the failure behavior is enabled, reads of blocks configured "bad" will fail with EIO. Writes of blocks configured "bad" will result in the following: 1. Remove the block from the "bad block list". 2. Successfully complete the write. After this point, the block will successfully contain the written data, and will service reads and writes normally. This emulates the behavior of a "remapped sector" on a hard disk drive. dm-dust provides logging of which blocks have been added or removed to the "bad block list", as well as logging when a block has been removed from the bad block list. These messages can be used alongside the messages from the driver using a dm-dust device to analyze the driver's behavior when a read fails at a given time. (This logging can be reduced via a "quiet" mode, if desired.) NOTE: If the block size is larger than 512 bytes, only the first sector of each "dust block" is detected. Placing a limiting layer above a dust target, to limit the minimum I/O size to the dust block size, will ensure proper emulation of the given large block size. Signed-off-by: Bryan Gurney <bgurney@redhat.com> Co-developed-by: Joe Shimkus <jshimkus@redhat.com> Co-developed-by: John Dorminy <jdorminy@redhat.com> Co-developed-by: John Pittman <jpittman@redhat.com> Co-developed-by: Thomas Jaskiewicz <tjaskiew@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30bcache: clean up do_btree_node_write a bitChristoph Hellwig
Use a variable containing the buffer address instead of the to be removed integer iterator from bio_for_each_segment_all. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30bcache: remove redundant LIST_HEAD(journal) from run_cache_set()Coly Li
Commit 95f18c9d1310 ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets to remove the original define of LIST_HEAD(journal), which makes the change no take effect. This patch removes redundant variable LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix working. Fixes: 95f18c9d1310 ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") Reported-by: Juha Aatrokoski <juha.aatrokoski@aalto.fi> Cc: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-29dm persistent data: Simplify stack trace handlingThomas Gleixner
Replace the indirection through struct stack_trace with an invocation of the storage array based interface. This results in less storage space and indirection. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094802.533968922@linutronix.de
2019-04-29dm bufio: Simplify stack trace retrievalThomas Gleixner
Replace the indirection through struct stack_trace with an invocation of the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094802.446326191@linutronix.de
2019-04-26dm writecache: avoid unnecessary lookups in writecache_find_entry()Mikulas Patocka
This is a small optimization in writecache_find_entry(). If we go past the condition "if (unlikely(!node))", we can be certain that there is no entry in the tree that has the block equal to the "block" variable. Consequently, we can return the next entry directly, we don't need to go to the second part of the function that finds the entry with lowest or highest seq number that matches the "block" variable. Also, add some whitespace and cleanup needless braces. Suggested-by: Huaisheng Ye <yehs1@lenovo.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-26dm writecache: remove unused member page_offset in writeback_structHuaisheng Ye
The stucture member page_offset in writeback_struct never has been used actually. Remove it. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-26dm delay: fix a crash when invalid device is specifiedMikulas Patocka
When the target line contains an invalid device, delay_ctr() will call delay_dtr() with NULL workqueue. Attempting to destroy the NULL workqueue causes a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>