summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/tvp514x.c
AgeCommit message (Collapse)Author
2018-01-23media: entity: Add a nop variant of media_entity_cleanupSakari Ailus
Add nop variant of media_entity_cleanup. This allows calling media_entity_cleanup whether or not Media controller is enabled, simplifying driver code. Also drop #ifdefs on a few drivers around media_entity_cleanup(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30media: tvp514x: fix kernel-doc parametersMauro Carvalho Chehab
There are some struct fields that aren't documented, and some consts whose comments start with /**, but they aren't kernel-doc annotations. So, fix it: drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq' drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = ' drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = ' drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt' drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format' drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = ' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: Switch from V4L2 OF not V4L2 fwnode APISakari Ailus
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-27[media] media: Drop FSF's postal address from the source code filesSakari Ailus
Drop the FSF's postal address from the source code files that typically contain mostly the license text. Of the 628 removed instances, 578 are outdated. The patch has been created with the following command without manual edits: git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \ drivers/media/ include/media|while read i; do i=$i perl -e ' open(F,"< $ENV{i}"); $a=join("", <F>); $a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m && $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m; close(F); open(F, "> $ENV{i}"); print F $a; close(F);'; done Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-10-24[media] media: i2c: tvp514x: Reported mbus format should be ↵Benoit Parrot
MEDIA_BUS_FMT_UYVY8_2X8 The advertised V4L2 pixel format and Media Bus code don't match. The current media bud code advertised is MEDIA_BUS_FMT_YUYV8_2X8 which does not reflect what the encoder actually outputs. This encoder generate MEDIA_BUS_FMT_UYVY8_2X8 so advertise as such. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] constify local structuresJulia Lawall
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-06[media] media/i2c: Delete owner assignmentMarkus Elfring
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-02-01[media] tvp514x: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab
With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab
Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab
Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] include/media: split I2C headers from V4L2 coreMauro Carvalho Chehab
Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-07-06[media] media/i2c/tvp514x: Remove compat control opsRicardo Ribalda
They are no longer used in old non-control-framework bridge drivers. Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2: replace video op g_mbus_fmt by pad op get_fmtHans Verkuil
The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses by the get_fmt pad op and remove the video op. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2: replace enum_mbus_fmt by enum_mbus_codeHans Verkuil
Replace all calls to the enum_mbus_fmt video op by the pad enum_mbus_code op and remove the duplicate video op. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kamil Debski <k.debski@samsung.com> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_configHans Verkuil
If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03[media] media: drop call to v4l2_device_unregister_subdev()Lad, Prabhakar
These drivers are moved to support asynchronous probing, v4l2_async_unregister_subdev() unregisters the subdev so there isn't a need to explicitly call v4l2_device_unregister_subdev(). Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] i2c: Make use of media_bus_format enumBoris BREZILLON
In order to have subsytem agnostic media bus format definitions we've moved media bus definitions to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Replace all references to the old definitions in i2c drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-05-24[media] v4l: subdev: Move [gs]_std operation to video opsLaurent Pinchart
The g_std and s_std operations are video-related, move them to the video ops where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-06[media] of: move graph helpers from drivers/media/v4l2-core to drivers/ofPhilipp Zabel
This patch moves the parsing helpers used to parse connected graphs in the device tree, like the video interface bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt, from drivers/media/v4l2-core/v4l2-of.c into drivers/of/base.c. This allows to reuse the same parser code from outside the V4L2 framework, most importantly from display drivers. The functions v4l2_of_get_next_endpoint, v4l2_of_get_remote_port, and v4l2_of_get_remote_port_parent are moved. They are renamed to of_graph_get_next_endpoint, of_graph_get_remote_port, and of_graph_get_remote_port_parent, respectively. Since there are not that many current users yet, switch all of them to the new functions right away. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2013-10-31[media] tvp514x: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] media: i2c: tvp514x: add support for asynchronous probingLad, Prabhakar
Both synchronous and asynchronous tvp514x subdevice probing is supported by this patch. This patch also fixes the error path by calling media_entity_cleanup() on failure in probe when CONFIG_MEDIA_CONTROLLER is enabled. Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-28[media] media: i2c: tvp514x: remove manual setting of subdev nameLad, Prabhakar
This patch removes manual setting of subdev name in the probe, ideally subdev names must be unique. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] tvp514x: Fix init seqeunceLars-Peter Clausen
client->driver->id_table will always point to the first entry in the device id table. So all devices will use the same init sequence. Use the id table entry that gets passed to the driver's probe() function to get the right init sequence. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: i2c: tvp514x: add OF supportLad, Prabhakar
add OF support for the tvp514x driver. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] tvp514x: fix querystdHans Verkuil
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] media/i2c: remove g_chip_ident opHans Verkuil
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] tvp514x: Fix double freeLaurent Pinchart
The tvp514x data structure is allocated using devm_kzalloc(). Freeing it explictly would result in a double free. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media: tvp514x: enable TVP514X for media controller based usageManjunath Hadli
add support for TVP514x as a media entity and support for pad operations. The decoder supports 1 output pad. The default format code was V4L2_MBUS_FMT_YUYV10_2X10 changed it to V4L2_MBUS_FMT_UYVY8_2X8. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] tvp514x: use devm_kzalloc() instead of kzalloc()Lad, Prabhakar
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] tvp514x: s_routing should just change routing, not try to detect a ↵Hans Verkuil
signal The s_routing function should not try to detect a signal. It is a really bad idea to try to detect a valid video signal and return an error if you can't. Changing input should do just that and nothing more. Also don't power on the ADCs on s_routing, instead do that on querystd. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] move i2c files into drivers/media/i2cMauro Carvalho Chehab
Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-21 01:44:02 +0000