summaryrefslogtreecommitdiff
path: root/drivers/media/platform/qcom/camss/camss-csid.c
AgeCommit message (Collapse)Author
2023-11-23media: qcom: camss: Fix references to pad configLaurent Pinchart
V4L2 subdev operations have moved from operating on a v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix remaining incorrect references to pad config in comments. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-07media: qcom: camss: Remove special case for VFE get/putBryan O'Donoghue
From sdm845 onwards we need to ensure the VFE is powered on prior to switching on the CSID. Currently the code tests for sdm845, sm8250 and then does get/set. This is not extensible and it turns out is not necessary either since vfe_get and vfe_set reference count. Remove the over-conservative SoC version check. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb3 # db410c Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: qcom: camss: Pass CAMSS subdev callbacks via resource ops pointerBryan O'Donoghue
It is possible to pass all of the CAMSS subdevice internal operations pointers from the controlling resources structure with an additional pointer added to the resources structure. This allows for the removal of most of the probe-time control structures. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: qcom: camss: Pass remainder of variables as resourcesBryan O'Donoghue
The following variables are being assigned statically based on compatible strings in the probe path. * enum camss_version version; * unsigned int csiphy_num; * unsigned int csid_num; * unsigned int vfe_num; * unsigned int vfe_lite_num; * unsigned int vfe_total_num; Migrate those variables to resource parameters passed in on platform probe arguments. The one caveat is for VFE it has been necessary to intoduce a new variable vfe_total_num to capture the aggregate value of vfe_num + vfe_lite_num. All the rest of the changes are rote camss->variable to camss->res->variable with the parameter tables now populating the listed variables. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: qcom: camss: Rename camss struct resources to camss_subdev_resourcesBryan O'Donoghue
Rename non-specific struct resources {} to struct camss_subdev_resources {} Each logical block in CAMSS has a number of regulators, clocks and resets associated with it. We represent these blocks as v4l subdevices. The name "struct camss_subdev_resources" is a more descriptive and accurate name. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: qcom/camss: use 1X16 formats instead of 2X8Martin Dørum
Platforms with qcom-camss use CSI-2, which means 1X16 is more correct than 2X8. The fact that qcom-camss supported only 2X8 meant it was incompatible with camera sensors it should have been compatible with. For example, the ov5645 driver (correctly) reports that its format is UYVY8_1X16 (after ba449bb56203aedc4530a82b0f3f83358808b7f2). Since qcom-camss only supports 2X8, the qcom-camss system is incompatible with the ov5645 driver, even though they should be compatible. This patch replaces all uses of UYVY8_2X8/VYUY8_2X8/YUYV8_2X8/YVYU8_2X8 with the equivalent 1X16 formats. Signed-off-by: Martin Dørum <dorum@noisolation.com> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: camss: sm8250: Virtual channels for CSIDMilen Mitkov
CSID hardware on SM8250 can demux up to 4 simultaneous streams based on virtual channel (vc) or datatype (dt). The CSID subdevice entity now has 4 source ports that can be enabled/disabled and thus can control which virtual channels are enabled. Datatype demuxing not tested. In order to keep a valid internal state of the subdevice, implicit format propagation from the sink to the source pads has been preserved. However, the format on each source pad can be different and in that case it must be configured explicitly. CSID's s_stream is called when any stream is started or stopped. It will call configure_streams() that will rewrite IRQ settings to HW. When multiple streams are running simultaneously there is an issue when writing IRQ settings for one stream while another is still running, thus avoid re-writing settings if they were not changed in link setup, or by fully powering off the CSID hardware. Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-07-17media: mc-entity: Rename media_entity_remote_pad() to ↵Laurent Pinchart
media_pad_remote_pad_first() The media_entity_remote_pad() is misnamed, as it operates on a pad and not an entity. Rename it to media_pad_remote_pad_first() to clarify its behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: camss: csid: fix wrong size passed to devm_kmalloc_array()Yang Yingliang
'supplies' is a pointer, the real size of struct regulator_bulk_data should be pass to devm_kmalloc_array(). Fixes: 0d8140179715 ("media: camss: Add regulator_bulk support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-07media: camss: Add regulator_bulk supportBryan O'Donoghue
Add the ability to enable or disable multiple regulators in bulk with camss. This is useful for sm8250, sdm845 and it looks like sdm660 where we have more than one CSI regulator to do at once. It should just work for standalone existing vdda regulators and parts which don't have an explicitly defined CSI regulator. [hverkuil: fix camss-csid.c:163:13: warning: 'ret' may be used uninitialized in this function] Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: camss: Use platform_get_irq_byname() to get the interruptLad Prabhakar
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: camss: Apply vfe_get/vfe_put fix to SDM845Bryan O'Donoghue
Similar to the SM8250 the CSID relies on the VFE to be clocked prior to taking the CSID out of reset. Apply the same fixup to SDM845 as SM8250. Suggested-by: Robert Foss <robert.foss@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: camss: Do vfe_get/vfe_put for csid on sm8250Bryan O'Donoghue
The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on and clocked prior to taking the CSID out of reset. It is possible to open just the CSID subdev from libcamera and attempt to bring the CSID block up. If we do not first bring up the VFE the CSID will fail to come out of reset. Tested-by: Julian Grahsl <jgrahsl@snap.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: camss: add support for SM8250 camssJonathan Marek
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID. CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are inside the VFE region (between the "top" and "bus" registers), so a workaround is added to avoid ioremap failure. [bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk [jgrahsl, bod] Add slow_ahb_src clock values [jgrahsl, bod] Add cpa_ahb clock values Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Julian Grahsl <jgrahsl@snap.com> Co-developed-by: Julian Grahsl <jgrahsl@snap.com> Signed-off-by: Julian Grahsl <jgrahsl@snap.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: camss: csid: allow csid to work without a regulatorJonathan Marek
At least for titan HW, CSID don't have an associated regulator. This change is necessary to be able to model this in the CSID resources. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Julian Grahsl <jgrahsl@snap.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: camss: move to use request_irq by IRQF_NO_AUTOEN flagTian Tao
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which is being merged: https://lore.kernel.org/patchwork/patch/1388765/ Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19media: camss: use pm_runtime_resume_and_get()Mauro Carvalho Chehab
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19media: qcom/camss: Use devm_platform_ioremap_resource_bynamedingsenjie
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: camss: csid: Remove redundant dev_err call in msm_csid_subdev_init()Yang Yingliang
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: camss: Add support for CSID hardware version Titan 170Robert Foss
Add register definitions for version 170 of the Titan architecture and implement support for the CSID subdevice. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: camss: Refactor CSID HW version supportRobert Foss
In order to support Qualcomm ISP hardware architectures that diverge from older architectures, the CSID subdevice drivers needs to be refactored to better abstract the different ISP hardware architectures. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: camss: Add missing format identifiersRobert Foss
The CSI-2 spec defines format identifier for Data Type (DT), and how the Decode Format (DF) & Encode Format (EF) are implemented. The spec does however not define the DF, EF or Plain Format (PF) identifiers, as those are vendor specific. Plain formats describe the size of the pixels written by the RDI units to memory. PLAIN8 for example has the size 8 bits, and PLAIN32 32 bits. The appropriate Plain Format is determined by the Decode Format used. The smallest Plain Format that is able to contain a pixel of the used Decode Format is the appropriate one to use. As the vendor specific identifiers differ between hardware generations, split them out into separate headers. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: camss: use v4l2_get_link_freq() to calculate the relevant clocksAndrey Konovalov
There are places in the camss driver where camss_get_pixel_clock() is called to get the pixel rate (using V4L2_CID_PIXEL_RATE control) and to calculate the link frequency from it. There is a case when this would not work: when V4L2_CID_PIXEL_RATE gets the rate at which the pixels are read (sampled) from the sensor's pixel array, and this rate is different from the pixel transmission rate over the CSI link, the link frequency value can't be calculated from the pixel rate. One needs to use V4L2_CID_LINK_FREQ to get the link frequency in this case. Replace such calls to camss_get_pixel_clock() with calls to a wrapper around v4l2_get_link_freq(). v4l2_get_link_freq() tries V4L2_CID_LINK_FREQ first, and if it is not implemented by the camera sensor driver, falls back to V4L2_CID_PIXEL_RATE to calculate the link frequency value from. Calls to camss_get_pixel_clock() from vfe_[check,set]_clock_rates() are left intact as it looks like this VFE clock does depend on the rate the pixel samples comes out of the camera sensor, not on the frequency at which the link between the sensor and the CSI receiver operates. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: camss: Add support for SDM630/636/660 camera subsystemAngeloGioacchino Del Regno
Add support for the Qualcomm SDM630/636/660 and SDA variants' camera subsystem. These SoCs are equipped with: - 3x CSI PHY 3-Phase v1.0 (downstream csiphy-v3.5) - 4x CSID v5.0 - 2x ISPIF v3.0 - 2x VFE 4.8 As a note, this camera subsystem is very similar to the one that is found in the MSM8998/APQ8098 SoCs. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: camss: use proper media entity function for subdevicesAndrey Konovalov
Currently for msm_csiphy, msm_csid, and msm_ispif subdevices the media entity function field is set to MEDIA_ENT_F_IO_V4L. This is incorrect as MEDIA_ENT_F_IO_V4L implies V4L2 video node. Change it to MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as this is the best fit from the functions defined in include/uapi/linux/media.h. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Tested-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-23media: camss: csid: Fix runtime PM imbalance in csid_set_powerDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2018-08-29media: camss: add missing includesArnd Bergmann
Multiple files in this driver fail to build because of missing header inclusions: drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c: In function 'csiphy_hw_version_read': drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c:31:18: error: implicit declaration of function 'readl_relaxed'; did you mean 'xchg_relaxed'? [-Werror=implicit-function-declaration] drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c: In function 'csiphy_hw_version_read': drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:52:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration] Add linux/io.h there and in all other files that call readl/writel and related interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Add support for events triggered by user controlsTodor Tomov
Changing a user control value can trigger an event to other users. Add support for that. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add support for 10-bit grayscale formatsTodor Tomov
Add support for 10-bit packed V4L2_PIX_FMT_Y10P (on 8x16 and 8x96) and unpacked V4L2_PIX_FMT_Y10 (on 8x96 only) pixel formats. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add support for RAW MIPI14 on 8x96Todor Tomov
Add support for RAW MIPI14 format for RDI mode on 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: MIPI10 to Plain16 format conversionTodor Tomov
Use the PRDI mode on 8x96 to allow to configure RAW MIPI10 to Plain16 format conversion. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Different format support on source padTodor Tomov
Usually the format on the source pad is the same as on the sink pad. However the CSID is able to do some format conversions. To support this make the format on the source pad selectable amongst a list of formats. This list can be different for each sink pad format. This is still not used but will be when the format conversions are implemented. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Format configuration per hardware versionTodor Tomov
As the 8x16 and 8x96 support different formats, separate the arrays which contain the supported formats. For the VFE also add separate arrays for RDI and PIX subdevices. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Add support for 8x96Todor Tomov
CSID hardware modules on 8x16 and 8x96 are similar. There is no need to duplicate the code by adding separate versions. Just update the register macros to return the correct register addresses. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add basic runtime PM supportTodor Tomov
There is a PM domain for each of the VFE hardware modules. Add support for basic runtime PM support to be able to control the PM domains. When a PM domain needs to be powered on - a device link is created. When a PM domain needs to be powered off - its device link is removed. This allows separate and independent control of the PM domains. Suspend/Resume is still not supported. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add 8x96 resourcesTodor Tomov
Add structs with 8x96 resources. As the number of CSIPHY, CSID and VFE hardware modules is different on 8x16 and 8x96 select the number at runtime and allocate needed structures dynamically. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Configure data type and decode format properlyTodor Tomov
The CSID decodes the input data stream. When the input comes from the Test Generator the format of the stream is set on the source media pad. When the input comes from the CSIPHY the format is the one on the sink media pad. Use the proper format for each case. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Use SPDX license headersTodor Tomov
Use SPDX license headers for all files of the Qualcomm CAMSS driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: Rename CAMSS driver pathTodor Tomov
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-23 21:57:42 +0000