summaryrefslogtreecommitdiff
path: root/drivers/media/usb/cx231xx
AgeCommit message (Collapse)Author
2018-04-04media: cx231xx: Increase USB bridge bandwidthBrad Love
The cx231xx USB bridge has issue streaming QAM256 DVB-C channels. QAM64 channels were fine, but QAM256 channels produced corrupted transport streams. cx231xx alt mode 4 does not provide enough bandwidth to acommodate QAM256 DVB-C channels, most likely DVB-T2 channels would break up as well. Alt mode 5 increases bridge bandwidth to 90Mbps, and fixes QAM256 DVB-C streaming. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: add tuner standby op, use where neededHans Verkuil
The v4l2_subdev core s_power op was used for two different things: power on/off sensors or video decoders/encoders and to put a tuner in standby (and only the tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner is accessed. The danger with calling (s_power, 0) to put a tuner into standby is that it is usually broadcast for all subdevs. So a video receiver subdev that supports s_power will also be powered off, and since there is no corresponding (s_power, 1) they will never be powered on again. In addition, this is specifically meant for tuners only since they draw the most current. This patch adds a new tuner op called 'standby' and replaces all calls to (core, s_power, 0) by (tuner, standby). This prevents confusion between the two uses of s_power. Note that there is no overlap: bridge drivers either just want to put the tuner into standby, or they deal with powering on/off sensors. Never both. This also makes it easier to replace s_power for the remaining bridge drivers with some PM code later. Whether we want something cleaner for tuners in the future is a separate topic. There is a lot of legacy code surrounding tuners, and I am very hesitant about making changes there. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07media: cx231xx: Add second i2c demod to Hauppauge 975Brad Love
Hauppauge HVR-975 is a hybrid, dual frontend, single tuner USB device. It contains lgdt3306a and si2168 frontends and one si2157 tuner. The lgdt3306a frontend is currently enabled. This creates the second demodulator and attaches it to the tuner. Enables lgdt3306a|si2168 + si2157 Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07media: cx231xx: Use constant instead of hard code for maxBrad Love
Nit regarding hard coded value. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07media: cx231xx: Set mfe_shared if second frontend foundBrad Love
If frontend[1] exists, then enable the dvb adapter mfe lock system. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07media: cx231xx: Use frontend i2c adapter with tunerBrad Love
Utilize the i2c mux adapter returned by the frontend. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: usb: don't initialize vars if not neededMarkus Elfring
Some local variables will be set to an appropriate value before usage. Thus omit explicit initialisations at the beginning of these functions. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: cx231xx: Add second i2c demod clientBrad Love
Include ability to add a i2c device style frontend to cx231xx USB bridge. All current boards set to use frontend[0]. Changes are backwards compatible with current behaviour. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: cx231xx: Add second frontend optionBrad Love
Include ability to add a second dvb attach style frontend to cx231xx USB bridge. All current boards set to use frontend[0]. Changes are backwards compatible with current behaviour. [mchehab@s-opensource.com: fix some coding style issues] Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: cx231xx: Add support for Hauppauge HVR-975Brad Love
Hauppauge HVR-975 is hybrid NTSC/PAL, QAM/ATSC, and DVB-C/T/T2 usb device. Only ATSC/QAM front end is initially active. Second frontend support is work in progress. CX23102 + LG3306A/Si2168(WiP) + Si2157 Changes since v1: - removed double semicolon Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: cx231xx: Add support for Hauppauge HVR-935CBrad Love
HVR-935C is hybrid PAL, DVB-C/T/T2 usb device. CX23102 + Si2168 + Si2157 Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-06media: s5h14*.h: fix typos for CONTINUOUSMauro Carvalho Chehab
There is a typo at the several s5h14*.h headers: continuous were spelled incorrectly. Fix it with this script: for i in $(git grep -l S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK); do sed s,S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,g -i $i done for i in $(git grep -l -i continous drivers/media); do sed s,CONTINOUS,CONTINUOUS,g -i $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'media/v4.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...
2018-01-04media: replace all <spaces><tab> occurrencesMauro Carvalho Chehab
There are a lot of places where sequences of space/tabs are found. Get rid of all spaces before tabs. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04media: fix usage of whitespaces and on indentationMauro Carvalho Chehab
On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28media: don't include drivers/media/i2c at cflagsMauro Carvalho Chehab
Most of the I2C headers got moved a long time ago to include/media/i2c. Stop including them at the patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28media: move dvb kAPI headers to include/mediaMauro Carvalho Chehab
Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18media: v4l2-dev: convert VFL_TYPE_* into an enumMauro Carvalho Chehab
Using enums makes easier to document, as it can use kernel-doc markups. It also allows cross-referencing, with increases the kAPI readability. Please notice that now cx88_querycap() has to have a default for the VFL type, as there are more types than supported by the driver. Acked-By: Mike Isely <isely@pobox.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-12media: cx231xx: Use semicolon after assignment instead of commaMatthias Schwarzott
End assignments by semicolon instead of comma. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-12media: si2165: Make checkpatch happyMatthias Schwarzott
Fix almost all of checkpatch --strict warnings. The remaining warnings are about: * macro REG16 (should be enclosed in parentheses) * macro REG16 (Macro argument reuse) Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11media: usb: add SPDX identifiers to some code I wroteMauro Carvalho Chehab
As we're now using SPDX identifiers, on several media drivers I wrote, add the proper SPDX, identifying the license I meant. As we're now using the short license, it doesn't make sense to keep the original license text. Also, fix MODULE_LICENSE to properly identify GPL v2. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08media: cx231xx: Add support for The Imaging Source DFG/USB2proRomain Reignier
Note that the inputs for the Composite and S-Video are inverted in regard to most of the other boards using a cx231xx chip. Signed-off-by: Romain Reignier <r.reignier@robopec.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
2017-11-27media: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27annotate poll_table_struct ->_keyAl Viro
Only POLL... bitmaps ever end up there and their only use is checking for POLL... bits in them. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-07media: usb: fix spelling mistake: "synchronuously" -> "synchronously"Colin Ian King
Trivial fix to spelling mistake in error message text [mchehab@s-opensource.org: folded all similar patches into one] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31media: cx231xx: make cx231xx_vbi_qops constBhumika Goyal
Make this const as it is only passed to the const argument of the function videobuf_queue_vmalloc_init in the file referencing it. Also, make the declaration in the header const. Structure found using Coccienlle and changes done by hand. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: cx231xx: Fix NTSC/PAL on Astrometa T2hybridOleh Kravchenko
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: cx231xx: Fix NTSC/PAL on Evromedia USB Full Hybrid Full HDOleh Kravchenko
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: rc: mceusb: add support for 1b80:d3b2Oleh Kravchenko
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0. Remote controller supplied with this tuner fully compatible with RC_MAP_MSI_DIGIVOX_III. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-04[media] cx231xx-cards: fix NULL-deref on missing association descriptorJohan Hovold
Make sure to check that we actually have an Interface Association Descriptor before dereferencing it during probe to avoid dereferencing a NULL-pointer. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Johan Hovold <johan@kernel.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-08-27media: cx231xx: fix use-after-free when unregistering the i2c_client for the ↵Matthias Schwarzott
dvb demod Calling i2c_unregister_device for a demod driver destroys the frontend object. Later it is accessed by calling dvb_unregister_frontend and dvb_frontend_detach. In some cases this leads to a general protection fault with this callstack: dvb_unregister_frontend+0x25/0x50 [dvb_core] dvb_fini+0xdb/0x160 [cx231xx_dvb] cx231xx_unregister_extension+0x3d/0xb0 [cx231xx] cx231xx_dvb_unregister+0x10/0x809 [cx231xx_dvb] SyS_delete_module+0x18a/0x240 ? exit_to_usermode_loop+0x7b/0x80 entry_SYSCALL_64_fastpath+0x17/0x98 Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: usb: make i2c_adapter constBhumika Goyal
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*Sean Young
RC_TYPE is confusing and it's just the protocol. So rename it. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: cx231xx: constify videobuf_queue_ops structuresJulia Lawall
These videobuf_queue_ops structures are only passed as the second argument to videobuf_queue_vmalloc_init, which is declared as const. Thus the videobuf_queue_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct videobuf_queue_ops i@p = { ... }; @ok1@ identifier r.i; expression e1; position p; @@ videobuf_queue_vmalloc_init(e1,&i@p,...) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct videobuf_queue_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct videobuf_queue_ops i = { ... }; // </smpl> In the first case, there is a second commented call to videobuf_queue_sg_init with the structure as the second argument. If that code will be uncommented, the const will remain correct, because the second parameter of that function is also const. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: usb: make snd_pcm_hardware constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09media: cx231xx: only unregister successfully registered i2c adaptersPeter Rosin
This prevents potentially scary debug messages from the i2c core. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09media: cx231xx: drop return value of cx231xx_i2c_unregisterPeter Rosin
No one cares anyway. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-09media: cx231xx: fail probe if i2c_add_adapter failsPeter Rosin
While at it, change the type of the previously always-zero i2c_rc member to int, matching the returned type from i2c_add_adapter. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: : usb: add const to v4l2_file_operations structuresBhumika Goyal
Declare v4l2_file_operations structures as const as they are only stored in the fops field of video_device structures. This field is of type const, so declare v4l2_file_operations structures with similar properties as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc-core: cx231xx - leave the internals of rc_dev aloneDavid Härdeman
Just some debug statements to change. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] cx231xx: Initial support Astrometa T2hybridOleh Kravchenko
This patch provide only digital support; The device is based on 24C02N EEPROM, Panasonic MN88473 demodulator, Rafael Micro R828D tuner and CX23102-11Z chipset; USB id: 15f4:0135. Status: - DVB-T/T2 works fine; - Composite works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-19[media] media drivers: annotate fall-throughMauro Carvalho Chehab
Avoid warnings like those: drivers/media/pci/ddbridge/ddbridge-core.c: In function 'dvb_input_detach': drivers/media/pci/ddbridge/ddbridge-core.c:787:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (input->fe) { ^ drivers/media/pci/ddbridge/ddbridge-core.c:792:2: note: here case 4: ^~~~ ... On several cases, it is just that gcc 7.1 is not capable of understanding the comment, but on other places, we need an annotation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-05Merge tag 'media/v4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates for v4.12-rc1: - new driver to support mediatek jpeg in hardware codec - rc-lirc, s5p-cec and st-cec staging drivers got promoted - hardware histogram support for vsp1 driver - added Virtual Media Controller driver, to make easier to test the media controller - added a new CEC driver (rainshadow-cec) - removed two staging LIRC drivers for obscure hardware that are too obsolete - added support for Intel SR300 Depth camera - some improvements at CEC and RC core - lots of driver cleanups, improvements all over the tree With this series, we're finally getting rid of the LIRC staging driver. There's just one left (lirc_zilog), with require more care, as part of its functionality (IR RX) is already provided by another driver. Work in progress to convert it on the proper way" * tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits) [media] ov2640: print error if devm_*_optional*() fails [media] atmel-isc: Fix the static checker warning [media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8 [media] ov2640: fix vflip control [media] ov2640: fix duplicate width+height returning from ov2640_select_win() [media] ov2640: add missing write to size change preamble [media] ov2640: add information about DSP register 0xc7 [media] ov2640: improve banding filter register definitions/documentation [media] ov2640: fix init sequence alignment [media] ov2640: make GPIOLIB an optional dependency [media] xc5000: fix spelling mistake: "calibration" [media] vidioc-queryctrl.rst: fix menu/int menu references [media] media-entity: only call dev_dbg_obj if mdev is not NULL [media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-' [media] mtk-vcodec: avoid warnings because of empty macros [media] coda: bump maximum number of internal framebuffers to 17 [media] media: mtk-vcodec: remove informative log [media] subdev-formats.rst: remove spurious '-' [media] dw2102: limit messages to buffer size [media] ttusb2: limit messages to buffer size ...
2017-04-19[media] cx231xx: stop double error reportingPeter Rosin
i2c_mux_add_adapter already logs a message on failure. Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-04-10[media] cx231xx-audio: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cx231xx-audio: fix init error pathJohan Hovold
Make sure to release the snd_card also on a late allocation error. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cx231xx-cards: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-04-06 11:35:08 +0000