| Age | Commit message (Collapse) | Author |
|---|
|
This change is intended to give to the v4l2 drivers a choice to
change the default behavior of the v4l2-core DMA mapping direction
from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or
OUTPUT) to DMA_BIDIRECTIONAL during queue_init time.
Initially the issue with DMA mapping direction has been found in
Venus encoder driver where the hardware (firmware side) adds few
lines padding on bottom of the image buffer, and the consequence
is triggering of IOMMU protection faults.
This will help supporting venus encoder (and probably other drivers
in the future) which wants to map output type of buffers as
read/write.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
3171 192 0 3363 d23 drivers/media/v4l2-core/videobuf2-vmalloc.o
File size After adding 'const':
text data bss dec hex filename
3291 80 0 3371 d2b drivers/media/v4l2-core/videobuf2-vmalloc.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
|
|
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro
in highmem.h, the former can be aliased if any dma-buf user includes
that header.
I'm personally trying to include highmem.h inside scatterlist.h and this
breaks the dma-buf code proper.
Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP.
To maintain consistency I've renamed all four of kmap* and kunmap* to be
map* and unmap*. (Even though only kmap_atomic presently conflicts.)
[1] https://www.spinics.net/lists/target-devel/msg15070.html
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
|
|
Use refcount_t to manage the refcount to the memory type specific buffer
videobuf2 buffer implementations. refcount_t is better suitable for the
purpose than atomic_t.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Always return an ERR_PTR() instead of NULL.
This makes the behavior of alloc, get_userptr and attach_dmabuf the
same.
Update the documentation in videobuf2-core.h as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make this a proper typed array. Drop the old allocate context code since
that is no longer used.
Note that the memops functions now get a struct device pointer instead of
the struct device ** that was there initially (actually a void pointer to
a struct containing only a struct device pointer).
This code is now a lot cleaner.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Make the dma attributes struct part of vb2_queue. This greatly simplifies
the remainder of the patch series since the dma_contig alloc context is
now (as before) just a struct device pointer.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use.
And replace videobuf2-core.h with videobuf2-v4l2.h.
This renaming change should be accompanied by the modifications
of all device drivers that include videobuf2-core.h.
It can be done with just running this shell script.
replace()
{
str1=$1
str2=$2
dir=$3
for file in $(find $dir -name *.h -o -name *.c -o -name Makefile)
do
echo $file
sed "s/$str1/$str2/g" $file > $file.out
mv $file.out $file
done
}
replace "videobuf2-core" "videobuf2-v4l2" "include/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/"
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Convert vb2_vmalloc_get_userptr() to use frame vector infrastructure.
When we are doing that there's no need to allocate page array and some
code can be simplified.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e976ef5 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr memop so that the
semaphore is acquired for a shorter time and it is clearer what it is
needed for.
Note that we also need mmap_sem in .put_userptr memop since that ends up
calling vb2_put_vma() which calls vma->vm_ops->close() which should be
called with mmap_sem held. However we didn't hold mmap_sem in some code
paths anyway (e.g. when called via vb2_ioctl_reqbufs() ->
__vb2_queue_free() -> vb2_dma_sg_put_userptr()) and getting mmap_sem in
put_userptr() introduces a lock inversion with queue->mmap_lock in the
above mentioned call path.
Luckily this whole locking mess will get resolved once we convert
videobuf2 core to the new mm helper which avoids the need for mmap_sem
in .put_userptr memop altogether.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This reverts commit 48b25a3a713b90988b6882d318f7c0a6bed9aabc.
That commit caused two regressions. The first is a BUG:
Jun 14 18:42:15 test-media kernel: [ 115.972299] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972307] IP: [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972316] PGD 0
Jun 14 18:42:15 test-media kernel: [ 115.972318] Oops: 0000 [#1] PREEMPT SMP
Jun 14 18:42:15 test-media kernel: [ 115.972321] Modules linked in: vivid v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media vmw_balloon vmw_vmci acpi_cpufreq processor button
Jun 14 18:42:15 test-media kernel: [ 115.972333] CPU: 0 PID: 1542 Comm: v4l2-ctl Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:42:15 test-media kernel: [ 115.972336] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:42:15 test-media kernel: [ 115.972337] task: ffff880220ce4200 ti: ffff88021d16c000 task.ti: ffff88021d16c000
Jun 14 18:42:15 test-media kernel: [ 115.972339] RIP: 0010:[<ffffffff810d5cd0>] [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972342] RSP: 0018:ffff88021d16f9b8 EFLAGS: 00010002
Jun 14 18:42:15 test-media kernel: [ 115.972343] RAX: 0000000000000046 RBX: 0000000000000292 RCX: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972345] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972346] RBP: ffff88021d16fa88 R08: 0000000000000001 R09: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972347] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972348] R13: ffff880220ce4200 R14: 0000000000000100 R15: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972350] FS: 00007f2441e7f740(0000) GS:ffff880236e00000(0000) knlGS:0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jun 14 18:42:15 test-media kernel: [ 115.972353] CR2: 0000000000000100 CR3: 0000000001e0b000 CR4: 00000000001406f0
Jun 14 18:42:15 test-media kernel: [ 115.972424] Stack:
Jun 14 18:42:15 test-media kernel: [ 115.972427] ffff88021d16fa98 ffffffff810d6543 0000000000000006 0000000000000246
Jun 14 18:42:15 test-media kernel: [ 115.972431] ffff88021d16fa08 ffffffff810d532d ffff880220ce4a78 ffff880200000000
Jun 14 18:42:15 test-media kernel: [ 115.972433] ffff880200000001 0000000000000000 0000000000000001 000000000093a4a0
Jun 14 18:42:15 test-media kernel: [ 115.972436] Call Trace:
Jun 14 18:42:15 test-media kernel: [ 115.972440] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972443] [<ffffffff810d532d>] ? mark_held_locks+0x6d/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972445] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:42:15 test-media kernel: [ 115.972447] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972452] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972458] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972460] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972463] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:42:15 test-media kernel: [ 115.972467] [<ffffffffa038fdc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972469] [<ffffffffa039f1f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972472] [<ffffffffa038b626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972475] [<ffffffffa038fdd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972478] [<ffffffffa038fe75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972481] [<ffffffffa038feb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972485] [<ffffffffa03ad372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:42:15 test-media kernel: [ 115.972491] [<ffffffffa0358460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972496] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972498] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972501] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:42:15 test-media kernel: [ 115.972504] [<ffffffff8108c670>] do_exit+0x3a0/0xaf0
Jun 14 18:42:15 test-media kernel: [ 115.972507] [<ffffffff819b3a9b>] ? _raw_spin_unlock_irq+0x2b/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972509] [<ffffffff8108e0ff>] do_group_exit+0x4f/0xe0
Jun 14 18:42:15 test-media kernel: [ 115.972511] [<ffffffff8109a170>] get_signal+0x200/0x8c0
Jun 14 18:42:15 test-media kernel: [ 115.972514] [<ffffffff819b14b5>] ? __mutex_unlock_slowpath+0xf5/0x240
Jun 14 18:42:15 test-media kernel: [ 115.972518] [<ffffffff81002593>] do_signal+0x23/0x820
Jun 14 18:42:15 test-media kernel: [ 115.972521] [<ffffffff819b1609>] ? mutex_unlock+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972524] [<ffffffffa0358648>] ? v4l2_ioctl+0x78/0xf0 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972526] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:42:15 test-media kernel: [ 115.972529] [<ffffffff810d54bd>] ? trace_hardirqs_on_caller+0x15d/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972531] [<ffffffff81002de0>] do_notify_resume+0x50/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972533] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:42:15 test-media kernel: [ 115.972534] Code: ca 81 31 c0 e8 7a e2 8c 00 e8 aa 1d 8d 00 0f 1f 44 00 00 31 db 48 81 c4 a8 00 00 00 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 90 <49> 81 3e 40 4e 02 82 b8 00 00 00 00 44 0f 44 e0 41 83 ff 01 0f
Jun 14 18:42:15 test-media kernel: [ 115.972567] RIP [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972569] RSP <ffff88021d16f9b8>
Jun 14 18:42:15 test-media kernel: [ 115.972570] CR2: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972573] ---[ end trace 25595c2b8560cb57 ]---
Jun 14 18:42:15 test-media kernel: [ 115.972575] Fixing recursive fault but reboot is needed!
This can be reproduced by loading the vivid driver and running:
v4l2-ctl --stream-user
and pressing Ctrl-C. You may have to try a few times, but in my experience this BUG
is triggered quite quickly.
The second is a possible deadlock:
Jun 14 18:44:07 test-media kernel: [ 49.376650] ======================================================
Jun 14 18:44:07 test-media kernel: [ 49.376651] [ INFO: possible circular locking dependency detected ]
Jun 14 18:44:07 test-media kernel: [ 49.376653] 4.1.0-rc3-test-media #1190 Not tainted
Jun 14 18:44:07 test-media kernel: [ 49.376654] -------------------------------------------------------
Jun 14 18:44:07 test-media kernel: [ 49.376655] v4l2-compliance/1468 is trying to acquire lock:
Jun 14 18:44:07 test-media kernel: [ 49.376657] (&mm->mmap_sem){++++++}, at: [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376665]
Jun 14 18:44:07 test-media kernel: [ 49.376665] but task is already holding lock:
Jun 14 18:44:07 test-media kernel: [ 49.376666] (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376670] which lock already depends on the new lock.
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376671]
Jun 14 18:44:07 test-media kernel: [ 49.376671] the existing dependency chain (in reverse order) is:
Jun 14 18:44:07 test-media kernel: [ 49.376672]
Jun 14 18:44:07 test-media kernel: [ 49.376672] -> #1 (&q->mmap_lock){+.+...}:
Jun 14 18:44:07 test-media kernel: [ 49.376675] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376682] [<ffffffff819aef5e>] mutex_lock_nested+0x5e/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376689] [<ffffffffa03934a2>] vb2_mmap+0x232/0x350 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376691] [<ffffffffa0395a60>] vb2_fop_mmap+0x20/0x30 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376694] [<ffffffffa0361102>] v4l2_mmap+0x52/0x90 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376698] [<ffffffff81177e33>] mmap_region+0x3b3/0x5e0
Jun 14 18:44:07 test-media kernel: [ 49.376701] [<ffffffff81178377>] do_mmap_pgoff+0x317/0x400
Jun 14 18:44:07 test-media kernel: [ 49.376703] [<ffffffff81165320>] vm_mmap_pgoff+0x90/0xc0
Jun 14 18:44:07 test-media kernel: [ 49.376708] [<ffffffff81176867>] SyS_mmap_pgoff+0x1d7/0x280
Jun 14 18:44:07 test-media kernel: [ 49.376709] [<ffffffff81007f8d>] SyS_mmap+0x1d/0x20
Jun 14 18:44:07 test-media kernel: [ 49.376714] [<ffffffff819b44ae>] system_call_fastpath+0x12/0x76
Jun 14 18:44:07 test-media kernel: [ 49.376716]
Jun 14 18:44:07 test-media kernel: [ 49.376716] -> #0 (&mm->mmap_sem){++++++}:
Jun 14 18:44:07 test-media kernel: [ 49.376718] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376720] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376721] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376723] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376725] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376727] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376729] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376731] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376733] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376737] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376739] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376744] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376746] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376749] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376752] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376754] other info that might help us debug this:
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376755] Possible unsafe locking scenario:
Jun 14 18:44:07 test-media kernel: [ 49.376755]
Jun 14 18:44:07 test-media kernel: [ 49.376756] CPU0 CPU1
Jun 14 18:44:07 test-media kernel: [ 49.376757] ---- ----
Jun 14 18:44:07 test-media kernel: [ 49.376758] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376759] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376760] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376761] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376763] *** DEADLOCK ***
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376764] 2 locks held by v4l2-compliance/1468:
Jun 14 18:44:07 test-media kernel: [ 49.376765] #0: (&dev->mutex#3){+.+.+.}, at: [<ffffffffa0398e0a>] _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376770] #1: (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376773]
Jun 14 18:44:07 test-media kernel: [ 49.376773] stack backtrace:
Jun 14 18:44:07 test-media kernel: [ 49.376776] CPU: 2 PID: 1468 Comm: v4l2-compliance Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:44:07 test-media kernel: [ 49.376777] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:44:07 test-media kernel: [ 49.376779] ffffffff8279e0b0 ffff88021d6f7ba8 ffffffff819a7aac 0000000000000011
Jun 14 18:44:07 test-media kernel: [ 49.376781] ffffffff8279e0b0 ffff88021d6f7bf8 ffffffff819a3964 ffff88021d6f7bd8
Jun 14 18:44:07 test-media kernel: [ 49.376783] ffff8800ac8aa100 0000000000000002 ffff8800ac8aa9a0 0000000000000002
Jun 14 18:44:07 test-media kernel: [ 49.376785] Call Trace:
Jun 14 18:44:07 test-media kernel: [ 49.376788] [<ffffffff819a7aac>] dump_stack+0x4f/0x7b
Jun 14 18:44:07 test-media kernel: [ 49.376792] [<ffffffff819a3964>] print_circular_bug+0x20f/0x251
Jun 14 18:44:07 test-media kernel: [ 49.376793] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376795] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376797] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:44:07 test-media kernel: [ 49.376798] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376800] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376802] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376803] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376805] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376807] [<ffffffffa0398dc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376808] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376810] [<ffffffffa0398e0a>] ? _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376812] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376814] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376816] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376818] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376820] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376822] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376824] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376825] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:44:07 test-media kernel: [ 49.376827] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376828] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376830] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376832] [<ffffffff819b46a6>] int_signal+0x12/0x17
This can be triggered by loading the vivid module with the module option 'no_error_inj=1'
and running 'v4l2-compliance -s5'. Again, it may take a few attempts to trigger this
but for me it happens quite quickly.
Without this patch I cannot reproduce these two issues. So reverting is the best
solution for now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e976ef5 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr and .put_userptr memops
so that the semaphore is acquired for a shorter time and it is clearer
what it is needed for.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
At present, dma_buf_export() takes a series of parameters, which
makes it difficult to add any new parameters for exporters, if required.
Make it simpler by moving all these parameters into a struct, and pass
the struct * as parameter to dma_buf_export().
While at it, unite dma_buf_export_named() with dma_buf_export(), and
change all callers accordingly.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
If NO_DMA=y:
drivers/built-in.o: In function `vb2_vmalloc_dmabuf_ops_detach':
videobuf2-vmalloc.c:(.text+0x6f11b0): undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `vb2_vmalloc_dmabuf_ops_map':
videobuf2-vmalloc.c:(.text+0x6f1266): undefined reference to `dma_unmap_sg'
videobuf2-vmalloc.c:(.text+0x6f1282): undefined reference to `dma_map_sg'
As we don't want to make the core VIDEOBUF2_VMALLOC depend on HAS_DMA
(it's v4l2 core code, and selected by a lot of drivers), stub out the
DMA support if HAS_DMA is not set.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Fix this warning:
drivers/media/v4l2-core/videobuf2-vmalloc.c:98:28: warning: incorrect type in assignment (different address spaces)
drivers/media/v4l2-core/videobuf2-vmalloc.c:158:28: warning: incorrect type in argument 1 (different address spaces)
The warning is correct, but we have no other choice here to forcibly cast.
At least it is now explicit that such a cast is needed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
"vb2_put_vma"
The vb2_put_vma() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add support for DMABUF exporting to the vb2-vmalloc implementation.
All memory models now have support for both importing and exporting of DMABUFs.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This is needed for the next patch where the dma-sg alloc memop needs
to know the dma_dir.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The 'write' argument is very ambiguous. I first assumed that if it is 1,
then we're doing video output but instead it meant the reverse.
Since it is used to setup the dma_dir value anyway it is now replaced by
the correct dma_dir value which is unambiguous.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Some drivers have special memory requirements for their buffers, usually
related to DMA (e.g. GFP_DMA or __GFP_DMA32). Make it possible to specify
additional GFP flags for those buffers by adding a gfp_flags field to
vb2_queue.
Note that this field will be replaced in the future with a different
mechanism, but that is still work in progress and we need this feature
now so we won't be able to convert drivers with such requirements to vb2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This patch adds support for importing DMABUF files for
vmalloc allocator in Videobuf2.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Currently, the v4l2 core is mixed together with other non-core drivers.
Move them into a separate directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
