summaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2011-03-22[media] s5p-fimc: Allow defining number of sensors at runtimeSylwester Nawrocki
Add num_clients field to struct s5p_fimc_isp_info to define exactly size of clients array which simplifies a bit the sensors management. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Prevent hanging on device close and fix the lockingSylwester Nawrocki
Rework the locking in m2m driver to assure proper operation on SMP systems. When job_abort or stop_streaming was called to immediately shutdown a memory-to-memory transaction video buffers scheduled for processing were never returned to vb2 and v4l2_m2m_job_finish was not called which led to hanging. Correct this and also return the unprocessed buffers to vb2 marking them as erroneous, in case the end of frame interrupt do not occur. Reported-by: Sewoon Park <seuni.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: Prevent oops when i2c adapter is not availableSylwester Nawrocki
Prevent invalid pointer dereference on error path. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] s5p-fimc: fix ISR and buffer handling for fimc-captureSungchun Kang
In some cases fimc H/W did not stop although there were no output buffers available. So the capture deactivation interrupt routine is modified and the state of ST_CAPT_RUN is cleared only in the LAST-IRQ call. After LAST-IRQ is generated, H/W pointer will be skipped by 1 frame. (reference by user manual) So, S/W pointer should be increased too. Reviewed-by Jonghun Han <jonghun.han@samsung.com> Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF cardAbylay Ospan
Two xc5000 tuners connected to same i2c bus. Experiments shows that situation when one tuner is not initialized while other is tuned to channel causes TS errors. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] Fix CI code for NetUP Dual DVB-T/C CI RF cardAbylay Ospan
CI reset takes several seconds on some CAM, so there is no need to lock mutex all that time. Also we need not to preserve CI's reset bits in CIBUSCTRL register, they are handled automatically by FPGA. Set it to 0 explicitly in order to not reset wrong CAM. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cx23885: Altera FPGA CI interface reworkedAbylay Ospan
It decreases I2C traffic. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cpia2: Fix some gcc 4.6 warnings when debug is disabledMauro Carvalho Chehab
cpia2_core.c:529:14: warning: variable 'dir' set but not used [-Wunused-but-set-variable] cpia2_core.c:526:5: warning: variable 'block_index' set but not used [-Wunused-but-set-variable] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] several drivers: Fix a few gcc 4.6 warningsMauro Carvalho Chehab
au0828-dvb.c:99:6: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:25: warning: variable 'maxheight' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:15: warning: variable 'maxwidth' set but not used [-Wunused-but-set-variable] bttv-input.c:196:16: warning: variable 'current_jiffies' set but not used [-Wunused-but-set-variable] Those variables are not used at all, so just remove them. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] altera-ci.h: add missing inlineHans Verkuil
Functions defined in a header should be static inline. This prevents compile warnings like: 'altera_ci_tuner_reset' defined but not used (Actually appeared in the media backwards compatibility build). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] cx88-alsa: fix compiler warningHans Verkuil
drivers/media/video/cx88/cx88-alsa.c: In function 'cx88_audio_initdev': drivers/media/video/cx88/cx88-alsa.c:881:20: warning: 'core' may be used uninitialized in this function The compiler doesn't understand that snd_cx88_create fills in the core pointer. So just initialize it to NULL. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] altera-ci.c: fix compiler warningsHans Verkuil
drivers/media/video/cx23885/altera-ci.c: In function 'altera_hw_filt_init': drivers/media/video/cx23885/altera-ci.c:671:2: warning: cast from pointer to integer of different size drivers/media/video/cx23885/altera-ci.c: In function 'altera_ci_init': drivers/media/video/cx23885/altera-ci.c:739:2: warning: cast from pointer to integer of different size Use %p instead of 0x%x to print addresses. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Add set performance callback in isp platform dataLaurent Pinchart
Replace the omap_pm_set_min_bus_tput() with a callback to board code. This makes the omap3isp driver compilable as a module, and lets board code manage OMAP PM details depending on board requirements. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Kconfig and MakefileLaurent Pinchart
Add the OMAP3 ISP driver to the kernel build system. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: StatisticsDavid Cohen
The OMAP3 ISP statistics entities compute histogram and H3A statistics information from capture images. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: CCDC, preview engine and resizerLaurent Pinchart
The OMAP3 ISP CCDC, preview engine and resizer entities perform image processing and scaling. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: CCP2/CSI2 receiversLaurent Pinchart
The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect serial MIPI sensors to the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: Video devices and buffers queueLaurent Pinchart
The OMAP3 ISP video devices and buffers queue modules implement the V4L2 API on all the ISP video nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3isp: OMAP3 ISP coreSakari Ailus
The Image Signal Processor provides the system interface and the processing capability to connect RAW or YUV image-sensor modules to the OMAP3. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: RaniSuneela <r-m@ti.com> Signed-off-by: Atanas Filipov <afilipov@mm-sol.com> Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: subdev: Generic ioctl supportLaurent Pinchart
Instead of returning an error when receiving an ioctl call with an unsupported command, forward the call to the subdev core::ioctl handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace crop APIAntti Koskipaa
This patch adds the VIDIOC_SUBDEV_S_CROP and G_CROP ioctls to the userland API. CROPCAP is not implemented because it's redundant. Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace frame interval APILaurent Pinchart
The three new ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, VIDIOC_SUBDEV_G_FRAME_INTERVAL and VIDIOC_SUBDEV_S_FRAME_INTERVAL can be used to enumerate and configure a subdev's frame rate from userspace. Two new video::g/s_frame_interval subdev operations are introduced to support those ioctls. The existing video::g/s_parm operations are deprecated and shouldn't be used anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: v4l2_subdev userspace format APILaurent Pinchart
Add a userspace API to get, set and enumerate the media format on a subdev pad. The format at the output of a subdev usually depends on the format at its input(s). The try format operation is thus not suitable for probing format at individual pads, as it can't modify the device state and thus can't remember the format tried at the input to compute the output format. To fix the problem, pass an extra argument to the get/set format operations to select the 'try' or 'active' format. The try format is used when probing the subdev. Setting the try format must not change the device configuration but can store data for later reuse. Data storage is provided at the file-handle level so applications probing the subdev concurently won't interfere with each other. The active format is used when configuring the subdev. It's identical to the format handled by the usual get/set operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: subdev: Add new file operationsLaurent Pinchart
V4L2 sub-devices store pad formats and crop settings in the file handle. To let drivers initialize those settings properly, add an open operation that is called when the subdev is opened as well as a corresponding close operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Create v4l2 subdev file handle structureStanimir Varbanov
Used for storing subdev information per file handle and hold V4L2 file handle. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Antti Koskipaa <akoskipa@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8Laurent Pinchart
For consistency with the V4L2_MBUS_FMT_Y10_1X10 format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make v4l2_subdev inherit from media_entityLaurent Pinchart
V4L2 subdevices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the subdevice, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Make video_device inherit from media_entityLaurent Pinchart
V4L2 devices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the device, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] v4l: Add a media_device pointer to the v4l2_device structureLaurent Pinchart
The pointer will later be used to register/unregister media entities when registering/unregistering a v4l2_subdev or a video_device. With the introduction of media devices, device drivers need to store a pointer to a driver-specific structure in the device's drvdata. v4l2_device can't claim ownership of the drvdata anymore. To maintain compatibility with drivers that rely on v4l2_device storing a pointer to itself in the device's drvdata, v4l2_device_register() will keep doing so if the drvdata is NULL. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Events supportSakari Ailus
Provide v4l2_subdevs with v4l2_event support. Subdev drivers only need very little to support events. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David Cohen <dacohen@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Control ioctls supportLaurent Pinchart
Pass the control-related ioctls to the subdev driver through the control framework. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Uninline the v4l2_subdev_init functionLaurent Pinchart
The function isn't small or performance sensitive enough to be inlined. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: subdev: Add device node supportLaurent Pinchart
Create a device node named subdevX for every registered subdev. As the device node is registered before the subdev core::s_config function is called, return -EGAIN on open until initialization completes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] v4l: Share code between video_usercopy and video_ioctl2Laurent Pinchart
The two functions are mostly identical. They handle the copy_from_user and copy_to_user operations related with V4L2 ioctls and call the real ioctl handler. Create a __video_usercopy function that implements the core of video_usercopy and video_ioctl2, and call that function from both. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] drivers:media:cx231xx.h remove one to many l's in the wordJustin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] drivers:media:cx23418.h remove one to many l's in the wordJustin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx23885, altera-ci: remove operator return <value> in void procedureIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] via-camera: Add suspend/resume supportDaniel Drake
Add suspend/resume support to the via-camera driver, so that the video continues streaming over a suspend-resume cycle. Originally implemented by Jon Corbet. [mchehab@redhat.com: fix a small CodingStyle issue] Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ivtv: yuv: handle get_user_pages() -errno returnsPaul Cassella
get_user_pages() may return -errno, such as -EFAULT. So don't blindly use its return value as an offset into dma->map[] for the next get_user_pages() call. Since we'll give up and return an error if either fails, don't even make the second call if the first failed to give us exactly what we were looking for. The old code would also call put_page() on as many elements of dma->map[] as we'd asked for, regardless of how many were valid. [Andy Walls modified this patch to return -EFAULT instead of -EINVAL as Paul's observation "I'm not sure -EINVAL is the best return code vs -EFAULT or -ENOMEM, [...]" was correct. The return value bubbles up as a return code for write(), for which the V4L2 API spec indicates EINVAL is incorrect and EFAULT is correct.] Signed-off-by: Paul Cassella <fortytwo-ivtv@maneteren.bigw.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ivtv: Fix sparse warning regarding a user pointer in ↵Andy Walls
ivtv_write_vbi_from_user() Fix the first, botched attempt at preventing direct use of a user pointer in ivtv_write_vbi(). Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] ivtv: udma: handle get_user_pages() returning fewer pages than we ↵Paul Cassella
asked for get_user_pages() may return fewer page than we ask for. As we give up and return an error in this case, we need to put_page() each of the pages we did get. [Andy Walls modified the patch, only removing the braces in the 'for' statement, to eliminate a checkpatch warning.] Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] cx88: add support for TeVii S464 PCI cardIgor M. Liplianin
The card uses ds3000 demod from Montage. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: Use sysfs_attr_init() where appropriateMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: Minor VBI tweak to help potential CC supportMike Isely
pvrusb2: Declare closed-caption setup for line 21 - this is needed for sliced VBI capture support. (However none of that works right now anyway.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: width and height maximum valuesServaas Vandenberghe
pvrusb2: The origin of the capability bounds rectangle may differ from (left=0,top=0) so the calculation should use absolute coordinates, here below, or use relative coordinates like cropl_val-cap->bounds.left and cropt_val-cap->bounds.top. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: Fix a few missing default control values, for croppingMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: Minor cosmetic code tweakMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] pvrusb2: Handle change of mode before handling change of video standardMike Isely
pvrusb2: Recognize and handle mode change before dealing with changes related to the video standard. Even though the video standard should only matter when in analog mode, doing this way is technically cleaner in case there's other stuff that might depend on both. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] video: sn9c102: world-wirtable sysfs filesVasiliy Kulikov
Don't allow everybody to change video settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] Add proper audio support for Nova-S Plus with wm8775 ADCLawrence Rust
This patch adds audio DMA capture and ALSA mixer elements for the line input jack of the Hauppauge Nova-S-plus DVB-S PCI card. The Nova-S-plus has a WM8775 ADC that is currently not detected. This patch enables this chip and exports volume, balance mute and ALC elements for ALSA mixer controls. [mchehab@redhat.com: Changed the patch to only talk with wm8775 if board info says so. Also, added platform_data support, to avoid changing the behaviour for other boards, and fixed CodingStyle] [awalls@md.metrocast.net: Changed patch to make the WM8775_GID defintion bridge driver private and let the bridge driver set the value of v4l2_subdev.grp_id.] -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Andy Walls <awalls@md.metrocast.net>
generated by cgit (git 2.34.1) at 2025-06-01 03:33:51 +0000