summaryrefslogtreecommitdiff
path: root/drivers/memory
AgeCommit message (Collapse)Author
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-31drivers/memory/Kconfig: Add CONFIG_OF dependencyAnders Roxell
JZ4780_NEMC doesn't depend on OF, and if OF isn't enabled we get this error: drivers/memory/jz4780-nemc.c: In function ‘jz4780_nemc_num_banks’: drivers/memory/jz4780-nemc.c:72:10: error: implicit declaration of function ‘of_read_number’; did you mean ‘down_read_nested’? [-Werror=implicit-function-declaration] bank = of_read_number(prop, 1); ^~~~~~~~~~~~~~ down_read_nested Make JZ4780_NEMC depend on OF. Fixes: ab99e11062c1 ("memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-19memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon
It just makes maintainers' life easier by allowing them to compile-test this driver without having MACH_JZ4780 enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-18memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon
It just makes maintainers' life easier by allowing them to compile-test this driver without having FSL_SOC, ARCH_LAYERSCAPE or SOC_LS1021A enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-14Merge tag 'tegra-for-4.19-memory' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers memory: tegra: Changes for v4.19-rc1 This contains a single fix for the initialization order of the various parts of the Tegra memory controller driver. * tag 'tegra-for-4.19-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Correct driver probe order Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-10memory: tegra: Correct driver probe orderDmitry Osipenko
The Reset Controller should be registered in the end of probe, otherwise Memory Controller device goes away if IRQ requesting fails and the Reset Controller stays registered. To avoid having to unwind the MC probing in a case of SMMU probe failure, let's simply print the error message without failing the MC probe. This allows us to just move the Reset Controller registering before the SMMU registration, reducing code churning. Also let's not fail MC probe in a case of Reset Controller registration failure as it doesn't prevent the MC driver to work. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26memory: ti-emif-sram: Add resume function to recopy sram codeDave Gerlach
After an RTC+DDR cycle we lose sram context so emif pm functions present in sram are lost. We can check if the first byte of the original code in DDR contains the same first byte as the code in sram, and if they do not match we know we have lost context and must recopy the functions to the previous address to maintain PM functionality. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-25Merge tag 'tegra-for-4.18-memory-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers memory: tegra: Changes for v4.18-rc1 This contains some cleanup of the memory controller driver as well as unification work to share more code between Tegra20 and later SoC generations. Also included are an implementation for the hot resets functionality by the memory controller which is required to properly reset busy hardware. * tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready memory: tegra: Add Tegra210 memory controller hot resets memory: tegra: Add Tegra124 memory controller hot resets memory: tegra: Add Tegra114 memory controller hot resets memory: tegra: Add Tegra30 memory controller hot resets memory: tegra: Add Tegra20 memory controller hot resets memory: tegra: Introduce memory client hot reset memory: tegra: Squash tegra20-mc into common tegra-mc driver memory: tegra: Remove unused headers inclusions memory: tegra: Apply interrupts mask per SoC memory: tegra: Setup interrupts mask before requesting IRQ memory: tegra: Do not handle spurious interrupts dt-bindings: memory: tegra: Add hot resets definitions Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-18memory: tegra: Remove Tegra114 SATA and AFI reset definitionsDmitry Osipenko
Tegra114 doesn't have SATA nor PCIe, but TRM seems erroneously document them. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-18memory: tegra: Register SMMU after MC driver became readyDmitry Osipenko
Memory Controller driver invokes SMMU driver registration and MC's registers mapping is shared with SMMU. This mapping goes away if MC driver probing fails after SMMU registration. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-14Merge tag 'arm-soc/for-4.18/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson
into next/drivers This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 4.18, please pull the following: - Florian removes the synthetic struct device in the DPFE driver which was used to attach sysfs attributes and uses the platform_device we are probed from instead. * tag 'arm-soc/for-4.18/drivers' of https://github.com/Broadcom/stblinux: memory: brcmstb: dpfe: Remove need for dpfe_dev Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'gpmc-omap-for-v4.18' of https://github.com/rogerq/linux into ↵Olof Johansson
next/drivers OMAP-GPMC: driver updates for v4.18 * get rid of a redundant NULL check in gpmc_probe_dt_children() * tag 'gpmc-omap-for-v4.18' of https://github.com/rogerq/linux: memory: omap-gpmc: Avoid redundant NULL check Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'soc_drivers_for_4.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers ARM: SOC driver update for 4.18 - AEMIF driver update to support board files and remove need of mach-davinci aemif code - Use percpu counters for qmss datapath stats - License update for TI SCI * tag 'soc_drivers_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: firmware: ti_sci: Switch to SPDX Licensing soc: ti: knav_qmss: Use percpu instead atomic for stats counter memory: aemif: add support for board files memory: aemif: don't rely on kbuild for driver's name Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-09memory: brcmstb: dpfe: Remove need for dpfe_devFlorian Fainelli
We can hook sysfs objects to the parent platform device that we are created from, no need to have a synthetic dpfe_dev just for that. This incidentally removes the need for having an index, since we are guaranteed to have an unique path in the sysfs hiearchy. Acked-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-04-30memory: tegra: Add Tegra210 memory controller hot resetsThierry Reding
Define the table of memory controller hot resets for Tegra210. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Add Tegra124 memory controller hot resetsDmitry Osipenko
Define the table of memory controller hot resets for Tegra124. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Add Tegra114 memory controller hot resetsDmitry Osipenko
Define the table of memory controller hot resets for Tegra114. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Add Tegra30 memory controller hot resetsDmitry Osipenko
Define the table of memory controller hot resets for Tegra30. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Add Tegra20 memory controller hot resetsDmitry Osipenko
Define the table of memory controller hot resets for Tegra20 and add specific to Tegra20 hot reset operations. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Introduce memory client hot resetDmitry Osipenko
In order to reset busy HW properly, memory controller needs to be involved, otherwise it is possible to get corrupted memory or hang machine if HW was reset during DMA. Introduce memory client 'hot reset' that will be used for resetting of busy HW. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30memory: tegra: Squash tegra20-mc into common tegra-mc driverDmitry Osipenko
Tegra30+ has some minor differences in registers / bits layout compared to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver in a preparation for the upcoming MC hot reset controls implementation, avoiding code duplication. Note that this currently doesn't report the value of MC_GART_ERROR_REQ because it is located within the GART register area and cannot be safely accessed from the MC driver (this happens to work only by accident). The proper solution is to integrate the GART driver with the MC driver, much like is done for the Tegra SMMU, but that is an invasive change and will be part of a separate patch series. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27memory: tegra: Remove unused headers inclusionsDmitry Osipenko
Tegra210 contains some unused leftover headers, remove them for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27memory: tegra: Apply interrupts mask per SoCDmitry Osipenko
Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27memory: tegra: Setup interrupts mask before requesting IRQDmitry Osipenko
This avoids unwanted interrupt during MC driver probe. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27memory: tegra: Do not handle spurious interruptsDmitry Osipenko
The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-24memory: omap-gpmc: Avoid redundant NULL checkRoger Quadros
child->name cannot be NULL as we're already checking for it in gpmc_probe_dt_children() Signed-off-by: Roger Quadros <rogerq@ti.com>
2018-04-20memory: aemif: add support for board filesBartosz Golaszewski
Currently aemif is supported in two places separately. By the platform driver in drivers/memory and by a hand crafted driver in mach-davinci. We want to drop the latter but also keep the legacy mode. Add support for board files to the aemif driver. The new structure in platform data currently only contains the chip select number, since currently existing users don't require anything else, but it can be extended in the future. While extending the platform data struct, add kernel docs describing its members. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-04-20memory: aemif: don't rely on kbuild for driver's nameBartosz Golaszewski
We want to use aemif from board files. Use a static name in the driver's code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-04-18ARM: OMAP2+: Fix build when using split object directoriesDave Gerlach
The sleep33xx and sleep43xx files should not depend on a header file generated in drivers/memory. Remove this dependency and instead allow both drivers/memory and arch/arm/mach-omap2 to generate all macros needed in headers local to their own paths. This fixes an issue where the build fail will when using O= to set a split object directory and arch/arm/mach-omap2 is built before drivers/memory with the following error: .../drivers/memory/emif-asm-offsets.c:1:0: fatal error: can't open drivers/memory/emif-asm-offsets.s for writing: No such file or directory compilation terminated. Fixes: 41d9d44d7258 ("ARM: OMAP2+: pm33xx-core: Add platform code needed for PM") Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-07Merge tag 'samsung-drivers-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "Samsung soc drivers changes for v4.17" from Krzysztof Kozłowski: 1. Add SPDX license identifiers. 2. Populate children syscon nodes in PMU driver to properly model HW in DeviceTree. * tag 'samsung-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pmu: Populate children syscon nodes soc: samsung: Add SPDX license identifiers to headers memory: samsung: Add SPDX license identifiers
2018-03-07Merge tag 'soc_drivers_for_4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers Pull "SOC driver changes for v4.17" from Santosh Shilimkar: - Remove redundant dev_err from probe in ti-emif-srma driver - Make use of seq_putc in emif reg show * tag 'soc_drivers_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: memory: ti-emif-sram: remove redundant dev_err call in ti_emif_probe() memory-EMIF: Use seq_putc() in emif_regdump_show()
2018-03-05memory: ti-emif-sram: remove redundant dev_err call in ti_emif_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-03-05memory-EMIF: Use seq_putc() in emif_regdump_show()SF Markus Elfring
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-02-23memory: brcmstb: dpfe: support new way of passing data from the DCPUMarkus Mayer
The DCPU can now send message data in two ways: - via the data RAM, as before (this is now message type 0) - via the message RAM (this is message type 1) In order to support both methods, we check the message type of the response (bits 31:28) and then treat the offset (bits 27:0) accordingly. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23memory: brcmstb: dpfe: fix type declaration of variable "ret"Markus Mayer
In some functions, variable "ret" should be ssize_t, so we fix it. Fixes: 2f330caff577 ("memory: brcmstb: Add driver for DPFE") Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23memory: brcmstb: dpfe: properly mask vendor error bitsMarkus Mayer
We were printing the entire 32 bit register rather than just the lower 8 bits. Anything above bit 7 is reserved and may be any random value. Fixes: 2f330caff577 ("memory: brcmstb: Add driver for DPFE") Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-12memory: samsung: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL license statements with SPDX GPL-2.0 license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...
2018-01-12mtd: onenand: omap2: Configure driver from DTLadislav Michl
Move away from platform data configuration and use pure DT approach. Use generic probe function to deal with OneNAND node and remove now useless gpmc_probe_onenand_child function. Import sync mode timing calculation function from mach-omap2/gpmc-onenand.c Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-04Merge tag 'keystone_driver_soc_for_4.16' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers SOC: Keystone Soc driver updates for 4.16 - TI EMIF-SRAM driver - TI SCI print format fix - Navigator strndup lenth fix * tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: fix max dup length for kstrndup firmware: ti_sci: Use %zu for size_t print format memory: ti-emif-sram: remove unused variable memory: ti-emif-sram: introduce relocatable suspend/resume handlers Documentation: dt: Update ti,emif bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21Merge tag 'tegra-for-4.16-memory' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding: The Tegra memory controller driver will now instruct the SMMU driver to create groups, which will make it easier for device drivers to share an IOMMU domain between multiple devices. Initial Tegra186 support is also added in a separate driver. * tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get() iommu/tegra: Allow devices to be grouped memory: tegra: Create SMMU display groups memory: tegra: Add Tegra186 support dt-bindings: memory: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings
2017-12-15memory: tegra: Create SMMU display groupsThierry Reding
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210. This allows the display controllers on these devices to share the same IOMMU domain using the standard IOMMU group mechanism. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13memory: tegra: Add Tegra186 supportThierry Reding
The memory controller found on Tegra186 is different in some respects to its predecessors. Most notably it no longer implements an SMMU, but does assign ARM SMMU stream IDs for each memory client instead. Provide a driver that programs these registers so that memory clients can translate addresses via the ARM SMMU. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-06memory: ti-emif-sram: remove unused variableArnd Bergmann
The newly introduced driver causes a harmless warning for a variable that was evidently never used: drivers/memory/ti-emif-pm.c: In function 'ti_emif_remove': drivers/memory/ti-emif-pm.c:303:17: error: unused variable 'dev' [-Werror=unused-variable] Fixes: 8428e5ad750d ("memory: ti-emif-sram: introduce relocatable suspend/resume handlers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-02memory: ti-emif-sram: introduce relocatable suspend/resume handlersDave Gerlach
Certain SoCs like Texas Instruments AM335x and AM437x require parts of the EMIF PM code to run late in the suspend sequence from SRAM, such as saving and restoring the EMIF context and placing the memory into self-refresh. One requirement for these SoCs to suspend and enter its lowest power mode, called DeepSleep0, is that the PER power domain must be shut off. Because the EMIF (DDR Controller) resides within this power domain, it will lose context during a suspend operation, so we must save it so we can restore once we resume. However, we cannot execute this code from external memory, as it is not available at this point, so the code must be executed late in the suspend path from SRAM. This patch introduces a ti-emif-sram driver that includes several functions written in ARM ASM that are relocatable so the PM SRAM code can use them. It also allocates a region of writable SRAM to be used by the code running in the executable region of SRAM to save and restore the EMIF context. It can export a table containing the absolute addresses of the available PM functions so that other SRAM code can branch to them. This code is required for suspend/resume on AM335x and AM437x to work. In addition to this, to be able to share data structures between C and the ti-emif-sram-pm assembly code, we can automatically generate all of the C struct member offsets and sizes as macros by processing emif-asm-offsets.c into assembly code and then extracting the relevant data as is done for the generated platform asm-offsets.h files. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-12-01memory: omap-gpmc: Make 'bank-width' property optionalLadislav Michl
Error out only if both 'bank-width' and 'gpmc,device-width' are missing. As 'bank-width' is mostly used for NOR devices and all other devices must use 'gpmc,device-width' update the error message accordingly. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Roger Quadros <rogerq@ti.com>