summaryrefslogtreecommitdiff
path: root/drivers/mfd/intel-lpss.c
AgeCommit message (Collapse)Author
2019-11-11mfd: intel-lpss: Use devm_ioremap_uc for MMIOTuowen Zhao
Some BIOS erroneously specifies write-combining BAR for intel-lpss-pci in MTRR. This will cause the system to hang during boot. If possible, this bug could be corrected with a firmware update. This patch use devm_ioremap_uc to overwrite/ignore the MTRR settings by forcing the use of strongly uncachable pages for intel-lpss. The BIOS bug is present on Dell XPS 13 7390 2-in-1: [ 0.001734] 5 base 4000000000 mask 6000000000 write-combining 4000000000-7fffffffff : PCI Bus 0000:00 4000000000-400fffffff : 0000:00:02.0 (i915) 4010000000-4010000fff : 0000:00:15.0 (intel-lpss-pci) Link: https://bugzilla.kernel.org/show_bug.cgi?id=203485 Cc: <stable@vger.kernel.org> # v4.19+ Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Tuowen Zhao <ztuowen@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Roman Gilg <subdiff@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit requestAndy Shevchenko
There is no need to handle optional module request in the driver when user space tools has that feature for ages. Replace custom code by MODULE_SOFTDEP() macro to let user space know that we would like to have the DMA driver loaded first, if any. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd: intel-lpss: Consistently use GENMASK()Andy Shevchenko
Since we already are using BIT() macro, use GENMASK() as well for sake of consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-15Merge tag 'mfd-next-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-02mfd: intel-lpss: Release IDA resourcesAndy Shevchenko
ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-14mfd: intel-lpss: Set the device in reset state when initBinbin Wu
In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-26dmaengine: idma64: Move driver name to the headerAndy Shevchenko
There are two drivers that are relying on the iDMA 64-bit driver name to match. Instead of duplicating string in both of them, dedicate a header file and share it between users. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-04mfd: intel-lpss: Correct names of RESETS register bitsAndy Shevchenko
According to documentation the function has 2 bits for reset while iDMA 64-bit has only one. Rename it accordingly. Note, there is no functional change since we always handle them together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-29mfd: intel-lpss: Program REMAP register in PIO modeAndy Shevchenko
According to documentation REMAP register has to be programmed in either DMA or PIO mode of the slice. Move the DMA capability check below to let REMAP register be programmed in PIO mode. Cc: stable@vger.kernel.org # 4.3+ Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-10PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPENDRafael J. Wysocki
Make the intel-lpss driver set DPM_FLAG_SMART_SUSPEND for its devices which will allow them to stay in runtime suspend during system suspend unless they need to be reconfigured for some reason. Also make it avoid resuming its child devices if they have DPM_FLAG_SMART_SUSPEND set to allow them to remain in runtime suspend during system suspend. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2017-09-05mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspendFurquan Shaikh
Commit 274e43edcda6f ("mfd: intel-lpss: Do not put device in reset state on suspend") changed the behavior on suspend by not putting LPSS controllers into reset. This was done because S3/S0ix fail if UART device is put into reset and no_console_suspend flag is enabled. Because of the above change, I2C controller gets into a bad state if it observes that the I2C lines are pulled low when power to I2C device is cut off during suspend (generally, I2C lines are pulled to power rail of the I2C device in order to ensure that there is no leakage because of the pulls when device is turned off). This results in the controller timing out for all future I2C operations after resume. It is primarily because of the following sequence of operations: During suspend: 1. I2C controller is disabled, but it is not put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. ==> At this point the I2C controller gets into a bad state On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled. However, even after enabling the I2C controller, all future I2C xfers fail since the controller is in a bad state and does not attempt to make any transactions and hence times out. In order to ensure that the controller does not get into a bad state, this change puts it into reset if the controller type is not UART. With this change, the order of operations is: During suspend: 1. I2C controller is disabled and put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled and taken out of reset. Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel-lpss: Do not put device in reset state on suspendAzhar Shaikh
Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Cc: stable@vger.kernel.org Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-20Merge tag 'mfd-for-linus-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add new driver for MAXIM MAX77620/MAX20024 PMIC - Add new driver for Hisilicon HI665X PMIC New Device Support: - Add support for AXP809 in axp20x-rsb - Add support for Power Supply in axp20x New core features: - devm_mfd_* managed resources Fix-ups: - Remove unused code (da9063-irq, wm8400-core, tps6105x, smsc-ece1099, twl4030-power) - Improve clean-up in error path (intel_quark_i2c_gpio) - Explicitly include headers (syscon.h) - Allow building as modules (max77693) - Use IS_ENABLED() instead of rolling your own (dm355evm_msp, wm8400-core) - DT adaptions (axp20x, hi655x, arizona, max77620) - Remove CLK_IS_ROOT flag (intel-lpss, intel_quark) - Move to gpiochip API (asic3, dm355evm_msp, htc-egpio, htc-i2cpld, sm501, tc6393xb, tps65010, ucb1x00, vexpress) - Make use of devm_mfd_* calls (act8945a, as3711, atmel-hlcdc, bcm590xx, hi6421-pmic-core, lp3943, menf21bmc, mt6397, rdc321x, rk808, rn5t618, rt5033, sky81452, stw481x, tps6507x, tps65217, wm8400) Bug Fixes" - Fix ACPI child matching (mfd-core) - Fix start-up ordering issues (mt6397-core, arizona-core) - Fix forgotten register state on resume (intel-lpss) - Fix Clock related issues (twl6040) - Fix scheduling whilst atomic (omap-usb-tll) - Kconfig changes (vexpress)" * tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: hi655x: Add MFD driver for hi655x mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between" mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024 mfd: max77620: Add core driver for MAX77620/MAX20024 mfd: arizona: Add defines for GPSW values that can be used from DT mfd: omap-usb-tll: Fix scheduling while atomic BUG mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatile mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICs mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: twl4030-power: Remove driver path in file comment MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers mfd: smsc-ece1099: Remove unnecessarily remove callback mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULE ...
2016-05-09mfd: intel-lpss: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel-lpss: Save register context on suspendHeikki Krogerus
All configurations are lost and the registers will have default values when the hardware is suspended and resumed, so saving the private register space context on suspend, and restoring it on resume. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-09device property: don't bother the drivers with struct property_setHeikki Krogerus
Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09mfd: intel-lpss: Remove clock tree on error pathAndy Shevchenko
We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-07mfd: intel-lpss: Add support for passing device propertiesMika Westerberg
If the boot firmware does not support ACPI we need a way to pass device configuration information to the drivers. The unified device properties API already supports passing platform data via properties so let's take advantage of that and allow probe drivers to pass set of properties to the host controller driver. In order to do that we need to be able to modify the MFD cell corresponding the host controller, so make the core driver to take copy of the cell instead of using it directly. Then we can assign info->pset to the resulting copy of a cell and let the MFD core to assign that to the resulting device. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-10-26mfd: intel-lpss: Use writeq() helperAndy Shevchenko
There are already helper functions to do 64-bit I/O on 32-bit machines, thus we don't need to reinvent the wheel. In our case we can't use readq() / writeq() even on 64-bit kernel since there is a hardware limitation (OCP bus is a 32-bit bus). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-28mfd: Add support for Intel Sunrisepoint LPSS devicesAndy Shevchenko
The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>