summaryrefslogtreecommitdiff
path: root/drivers/mfd/rk808.c
AgeCommit message (Collapse)Author
2021-11-05mfd: rk808: Add support for power off on RK817Ondrej Jirman
RK817 has a power-off bit in SYS_CFG3. Add support for powering off the PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-01mfd: Add Rockchip rk817 audio CODEC supportChris Morgan
Add rk817 codec support cell to rk808 mfd driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-19mfd: Constify static struct resourcesRikard Falkeborn
Constify a number of static struct resource. The only usage of the structs are to assign their address to the resources field in the mfd_cell struct. This allows the compiler to put them in read-only memory. Done with the help of Coccinelle. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Convert RK805 to shutdown/suspend hooksRobin Murphy
RK805 has the same kind of dual-role sleep/shutdown pin as RK809/RK817, so it makes little sense for the driver to have to have two completely different mechanisms to handle essentially the same thing. Move RK805 over to the shutdown/suspend flow to clean things up. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Reduce shutdown duplicationRobin Murphy
Rather than having 3 almost-identical functions plus the machinery to keep track of them, it's far simpler to just dynamically select the appropriate register field per variant. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Stop using syscore opsRobin Murphy
Setting the SLEEP pin to its shutdown function for appropriate PMICs doesn't need to happen in single-CPU context, so there's really no point involving the syscore machinery. Hook it up to the standard driver model shutdown method instead. This also obviates the issue that the syscore ops weren't being unregistered on probe failure or module removal. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Ensure suspend/resume hooks always workRobin Murphy
The RK809/RK817 suspend/resume hooks should not have to depend on whether this driver owns the pm_power_off hook, and thus the global rk808_i2c_client is set - indeed, the GPIO-based control is really only relevant when PSCI firmware is in charge of power rather than the kernel. As driver model callbacks, they have an appropriate device argument to hand, so can just always use that. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Always use poweroff when requestedSoeren Moch
With the device tree property "rockchip,system-power-controller" we explicitly request to use this PMIC to power off the system. So always register our poweroff function, even if some other handler (probably PSCI poweroff) was registered before. This does tend to reveal a warning on shutdown due to the Rockchip I2C driver not implementing an atomic transfer method, however since the write to DEV_OFF takes effect immediately the I2C completion interrupt is moot anyway, and as the very last thing written to the console it is only visible to users going out of their way to capture serial output. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [ rm: note potential warning in commit message ] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11mfd: rk808: Use DEFINE_RES_IRQ for rk808 RTC alarm IRQHeiko Stuebner
Do not open code the definition, instead use the nice DEFINE_RES_IRQ macro for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11mfd: rk808: Set RK817 interrupt polarity to lowHeiko Stuebner
All other rk8xx operate with the polarity on low and even the old submitted devicetree snippet for the px30-evb declared the irq as low. So bring the rk817 preset in line with this, as there is really no reason for it to be the only with with a high polarity. The rk809/rk817 hasn't been added to any devicetrees so far, so this won't break anything. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-11mfd: rk808: Fix RK817 powerkey integrationHeiko Stuebner
The pwrkey integration seems to stem from the vendor kernel, as the compatible is wrong and also the order of key-irqs is swapped. So fix these issues to make the pwrkey on rk817 actually work. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-27mfd: rk808: Make PM function declaration staticLee Jones
Avoids: ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \ was not declared. Should it be static? Fixes: 5752bc4373b2 ("mfd: rk808: Mark pm functions __maybe_unused") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-27mfd: rk808: Mark pm functions __maybe_unusedArnd Bergmann
The newly added suspend/resume functions are only used if CONFIG_PM is enabled: drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function] drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them when they are not needed. Fixes: 586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-15Merge tag 'mfd-next-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-02mfd: rk808: Prepare rk805 for poweroffStefan Mavrodiev
RK805 has SLEEP signal, which can put the device into SLEEP or OFF mode. The default is SLEEP mode. However, when the kernel performs power-off (actually the ATF) the device will not go fully off and this will result in higher power consumption and inability to wake the device with RTC alarm. The solution is to enable pm_power_off_prepare function, which will configure SLEEP pin for OFF function. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: rk808: Check pm_power_off pointerStefan Mavrodiev
The function pointer pm_power_off may point to function from other module (PSCI for example). If rk808 is removed, pm_power_off is overwritten to NULL and the system cannot be powered off. This patch checks if pm_power_off points to a module function. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27mfd: rk808: Add RK817 and RK809 supportTony Xie
The RK809 and RK817 are a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators - RTC - Clocking Both RK809 and RK817 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Most of regulators have a some implementation also. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mfd: rk808: Remove the id_tableTony Xie
Remove the id_table because it's not used. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 power key supportJoseph Chen
Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 pinctrl supportJoseph Chen
Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 supportElaine Zhang
The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking Both RK808 and RK805 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Fix up the chip id get failedElaine Zhang
the rk8xx chip id is: ((MSB << 8) | LSB) & 0xfff0 Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13mfd: constify regmap_irq_chip structuresBhumika Goyal
Declare regmap_irq_chip structures as const as they are only stored in the regmap_irq_chip field of a rk808 structure. This field is of type const, so regmap_irq_chip structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct regmap_irq_chip x@p={...}; @ok@ struct rk808 a; identifier r.x; position p; @@ a.regmap_irq_chip=&x@p; @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct regmap_irq_chip x; File size before: text data bss dec hex filename 5033 584 16 5633 1601 drivers/mfd/rk808.o File size after: text data bss dec hex filename 5225 392 16 5633 1601 drivers/mfd/rk808.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29mfd: rk808: RK818 uses DEV_OFF to power off suppliesJianhong Chen
DEV_OFF and DEV_OFF_RST functions for RK808 are designed error that only DEV_OFF_RST can power off supplies. RK818 has been fixed this issue, so that DEV_OFF is used to power off supplies. Signed-off-by: Jianhong Chen <chenjh@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31mfd: rk808: Add RK818 supportWadim Egorov
The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking - Battery support Both RK808 and RK818 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: rk808: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and remove the call of mfd_remove_devices() from .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26mfd: Constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: rk808: Disable the under voltage detectChris Zhong
Rk808 has a under voltage detect function, when the voltage of buck is under 85% the target voltage, the buck output will reset. But if the power load is too heavy, this function maybe err, when current over 4.2A, although the voltage is normal, but RK808 mistakenly think it is under 85%, and reset the buck. So let's disable this function. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: rk808: Add register cachingDoug Anderson
Let's define the voltatile registers (those that can't be cached) and enable caching. The rk808 is accessed almost constantly with cpufreq so this is really nice. As measured by ftrace: before this change: cpu0_set_target() => ~2200us after this change: cpu0_set_target() => ~500us Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: RK808: Add new mfd driver for RK808Chris Zhong
The RK808 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clkout The RK808 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2024-05-28 12:35:14 +0000