summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm5102-tables.c
AgeCommit message (Collapse)Author
2016-11-29mfd: wm5102: Remove spurious trailing spacesRichard Fitzgerald
Remove the trailing spaces on the register default lines to stop checkpatch complaining. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: wm5102: Fix defaults array based on testingCharles Keepax
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-04Merge tag 'sound-4.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are little changes in core part, but lots of development are found in drivers, especially ASoC. The diffstat shows regmap-related changes for a slight API additions / changes, and that's all. Looking at the code size statistics, the most significant addition is for Intel Skylake. (Note that SKL support is still underway, the codec driver is missing.) Also STI controller driver is a major addition as well as a few new codec drivers. In HD-audio side, there are fewer changes than the past. The noticeable change is the support of ELD notification from i915 graphics driver. Thus this pull request carries a few changes in drm/i915. Other than that, USB-audio got a rewrite of runtime PM code. It was initiated by lockdep warning, but resulted in a good cleanup in the end. Below are the highlights: Common: - Factoring out of AC'97 reset code from ASoC into the core helper - A few regmap API extensions (in case it's not pulled yet) ASoC: - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek RT298 and ST STI controllers - Machine drivers for Rockchip systems with MAX98090 and RT5645 and RT5650 - Initial driver support for Intel Skylake devices - Lots of rsnd cleanup and enhancements - A few DAPM fixes and cleanups - A large number of cleanups in various drivers (conversion and standardized to regmap, component) mostly by Lars-Peter and Axel HD-audio: - Extended HD-audio core for Intel Skylake controller support - Quirks for Dell headsets, Alienware 15 - Clean up of pin-based quirk tables for Realtek codecs - ELD notifier implenetation for Intel HDMI/DP USB-audio: - Refactor runtime PM code to make lockdep happier" * tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits) drm/i915: Add locks around audio component bind/unbind drm/i915: Drop port_mst_index parameter from pin/eld callback ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup() ALSA: hda - Wake the codec up on pin/ELD notify events ALSA: hda - allow codecs to access the i915 pin/ELD callback drm/i915: Call audio pin/ELD notify function drm/i915: Add audio pin sense / ELD callback ASoC: zx296702-i2s: Fix resource leak when unload module ASoC: sti_uniperif: Ensure component is unregistered when unload module ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure ASoC: Clean up docbook warnings ASoC: txx9: Convert to devm_snd_soc_register_platform ASoC: pxa: Convert to devm_snd_soc_register_platform ASoC: nuc900: Convert to devm_snd_soc_register_platform ASoC: blackfin: Convert to devm_snd_soc_register_platform ASoC: au1x: Convert to devm_snd_soc_register_platform ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops ...
2015-08-11mfd: arizona: Specify regmap endiannessRichard Fitzgerald
Explicitly set the regmap endianness instead of relying on the default being correct. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: arizona: Fixup register table definitionsCharles Keepax
The regmap register definitions have been a source of many small fixes as issues are discovered. As such I made a small automated tool to check these definitions. This patch fixes the issues (mostly harmless) located by that tool, the issues fall into three catagories: 1) Volatile registers that have a default in the defaults table (default has been removed from the table since it is redundant) 2) Registers that are marked as volatile but unreadable (register has been removed from the volatile list since it is obviously not being used) 3) Registers that arn't readable but have an entry in the defaults table (again removed since it is redundant) 4) Readable non-volatile registers that are missing a default, these are dangerous as they won't get synced during a cache sync. Fortunately, most of them seem to be registers that shouldn't be there (for example wm5102 had readable registers for DRC2 and ISRC3 which is doesn't have) Hopefully another tool will be produced to check the actual default values themselves but that is outside the scope of this patch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-16regmap: Use reg_sequence for multi_reg_write / register_patchNariman Poushin
Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-09mfd: wm5102: Remove registers for output 3R from readable listCharles Keepax
The earpiece on 5102 is mono, thus there is no output 3R. Remove the registers associated with the unused right channel from the readable registers list. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registersCharles Keepax
These registers are documented in the datasheet and used as part of the extcon driver. Expose them properly through regmap as the datasheet notes they should be treated as volatile do so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-09-26mfd: arizona: Add ASYNC_SAMPLE_RATE_2 registersCharles Keepax
Some arizona devices have a second asynchronous sample rate, add the registers necessary to support this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: arizona: Mark additional registers as volatileCharles Keepax
Mark some additional registers as volatile. The write sequencer control registers should not be cached, as we don't ever want their value synchronised as this might cause a write sequence to be accidentally initiated. Additionally, the DAC_COMP registers require special preconditions to write so there values wouldn't be updated accurately during a register sync. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: wm5102: Mark register write sequencer control 3 readableMark Brown
During init the core checks if the wm5102 has finished starting by reading register 0x19 and looking at the value. This read always fails since this is not a readable register, mark it as being one. While we're at it provide a constant for the register name (as supplied by Charles Keepax). Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: wm5102: Insert missing break in case statementLee Jones
Chip identifier wm5102_reva_patch is always overwritten with wm5102_revb_patch, even when the code is run on a Rev-A chip. Place in the missing break to force the code into doing something sensible instead. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: arizona: Rename thermal shutdown interruptCharles Keepax
Newer versions of the IP introduce short circuit protection which will also shutdown the speaker. Rename the interrupt and associated register bits associated with thermal events to better fit the function and avoid conflict with future interrupt additions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: wm5102: Correct default for LDO Control 2 registerRichard Fitzgerald
Update the default value to match the patch. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: arizona: Correct addresses of always-on trigger registersRichard Fitzgerald
Update the addresses and names to match current silicon. The WM8997 regmap tables have been adjusted to match the new names. Missing registers have been added to WM5110 default value table. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-03-31mfd: arizona: Mark DSP clocking register as volatileCharles Keepax
The DSPs will often control there own clock speeds whilst running as such we should mark the registers controlling this as volatile. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: wm5102: Make additional DSP registers available to the userCharles Keepax
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: wm5102: Update register patchCharles Keepax
Update the register patch based on latest evaluation of the device. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-26mfd: arizona: Use new regmap features for manual register patchCharles Keepax
On the wm5102 the register patches are applied manually, rather than by the regmap core. This application is wrapped in calls to regcache_cache_bypass. However, this is dangerous as other threads may be accessing the hardware at the same time as the pm_runtime operations and if they do so during the period whilst cache_bypass is enabled those writes will miss the cache when they shouldn't. Apply the register patch using the new regmap_multi_reg_write_bypassed function to avoid this problem. Also remove the call to regcache_cache_bypass from the hardware patch application as it is unneeded there and creates a similar window for writes to miss the cache. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-23mfd: arizona: Mark missing AOD registers as volatileCharles Keepax
This registers ARIZONA_AOD_WKUP_AND_TRIG and ARIZONA_AOD_IRQ_RAW_STATUS contain interrupt status bits and thus should be volatile. They are correctly marked on wm5102 but not on wm5110, this patch changes this. Furthermore volatile registers don't need defaults so remove those. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-12mfd: wm5102: Expose DRE control registersCharles Keepax
Certain use cases may require specific DRE settings so expose the necessary registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-05Merge tag 'mfd-3.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD update from Samuel Ortiz: "For 3.10 we have a few new MFD drivers for: - The ChromeOS embedded controller which provides keyboard, battery and power management services. This controller is accessible through i2c or SPI. - Silicon Laboratories 476x controller, providing access to their FM chipset and their audio codec. - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader. - Nokia's Tahvo power button and watchdog device. This device is very similar to Retu and is thus supported by the same code base. - STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by the stmpe driver. - ST-Ericsson AB8540 and AB8505 power management and voltage converter controllers through the existing ab8500 code. Some other drivers got cleaned up or improved. In particular: - The Linaro/STE guys got the ab8500 driver in sync with their internal code through a series of optimizations, fixes and improvements. - The AS3711 and OMAP USB drivers now have DT support. - The arizona clock and interrupt handling code got improved. - The wm5102 register patch and boot mechanism also got improved." * tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits) mfd: si476x: Don't use 0bNNN mfd: vexpress: Handle pending config transactions mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly mfd: si476x: Fix i2c warning mfd: si476x: Add header files and Kbuild plumbing mfd: si476x: Add chip properties handling code mfd: si476x: Add the bulk of the core driver mfd: si476x: Add commands abstraction layer mfd: rtsx: Support RTS5249 mfd: retu: Add Tahvo support mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus mfd: wm8994: Add some OF properties mfd: wm8994: Add device ID data to WM8994 OF device IDs input: Export matrix_keypad_parse_of_params() mfd: tps65090: Add compatible string for charger subnode mfd: db8500-prcmu: Support platform dependant device selection mfd: syscon: Fix warnings when printing resource_size_t of: Add stub of_get_parent for non-OF builds mfd: omap-usb-tll: Convert to devm_ioremap_resource() mfd: omap-usb-host: Convert to devm_ioremap_resource() ...
2013-05-03Merge tag 'sound-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
2013-04-08mfd: wm5102: Map in additional FLL control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: wm5102: Update defaults to match patchCharles Keepax
Registers which have defaults and are updated by the patch file should have their defaults updated to match the value set by the patch file, otherwise incorrect values will be read from the cache. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: wm5102: Manually apply register patchCharles Keepax
Future updates will require us to manually apply the register patch for wm5102. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08mfd: wm5102: Update patch for latest evaluationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-01mfd: wm5102: Add registers for microphone detection level configurationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-21mfd: wm5102: Add additional speaker control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-06mfd: wm5102: Map in additional FLL control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-14Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2013-02-14mfd: wm5102: Make DSP scratch registers readableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: wm5102: Refresh register defaultsMark Brown
The WM5102 register defaults are not up to date with the current register map, synchronise them with those for current devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: wm5102: Mark DSP memory regions as volatile and readableMark Brown
We can cache some of them but this is simpler for now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: wm5102: Update rev B patch for latest evaluationMark Brown
The latest evaluation of the revision B silicon suggests some changes to the tuning applied for optimal performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: wm5102: Mark only extant DSP registers volatileMark Brown
Since regmap sometimes uses volatile as a proxy for readable simply having a blanket condition can mark too many registers as readable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27mfd: wm5102: Fix definition of WM5102_MAX_REGISTERMark Brown
Updated in latest datasheet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-15mfd: wm5102: Add microphone clamp control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-01-15extcon: arizona: Enable basic headphone identificationMark Brown
Use the headphone detection to identify if the accessory is a headphone or line load. There are two different revisions of the IP with different register layouts, support both. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-01-04mfd: wm5102: Mark wakes as invertedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-16Merge tag 'mfd-3.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-13Merge tag 'regulator-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A fairly quiet release again, a couple of relatively small new features and a bunch of driver specific work including yet more code elimination and fixes from Axel Lin. - Addidion of linear_min_sel for offsetting linear selectors in the helpers. - Support for continuous voltage ranges for regulators with extremely high resolution. - Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM vexpress." Fix up trivial conflict (due to typo fix) in palmas-regulator.c * tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits) regulator: core: Fix logic to determinate if regulator can change voltage regulator: s5m8767: Fix to work even if no DVS gpio present regulator: s5m8767: Fix to read the first DVS register. regulator: s5m8767: Fix to work when platform registers less regulators regulator: gpio-regulator: gpio_set_value should use cansleep regulator: gpio-regulator: Fix logical error in for() loop regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap regulator: anatop: Use linear_min_sel with linear mapping regulator: max1586: Implement get_voltage_sel callback regulator: lp8788-buck: Kill _gpio_request function regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel regulators: add regulator_can_change_voltage() function regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp regulator: wm831x-dcdc: Ensure selected voltage falls within requested range regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear ...
2012-12-09mfd: wm5102: Add readback of DSP status 3 registerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-12-03mfd: wm5102: Add tuning for revision BMark Brown
Evaluation of revision B of WM5102 suggests updates to the register patch for optimal performance, and make this the default behaviour for new devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-30mfd: wm5102: Mark DSP memory regions as volatileMark Brown
We can cache some of them but this is simpler for now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-30mfd: wm5102: Correct default for LDO1_CONTROL_2Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-28regulator: arizona-ldo1: Support 1.8V modeMark Brown
Some Arizona device support a 1.8V output mode. Enable this in the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>