summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2022-07-19mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to ↵Andy Shevchenko
pm_sleep_ptr() etc Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based kernel configuration guards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-6-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct deviceAndy Shevchenko
Extend use of temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-5-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()Andy Shevchenko
Simplify the mux error path a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-4-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()Andy Shevchenko
We have the specific helpers for platform device to set and get its driver data. Convert driver to use them instead of open coded variants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-3-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facilityAndy Shevchenko
Driver core takes care of sysfs attributes. Use this facility instead of doing it explicitly in ->probe() and ->remove(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-2-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()Andy Shevchenko
kstrtox() along with regmap API can return different error codes based on circumstances. Don't shadow them when returning to the caller. While at it, remove rather confusing message from addr_store(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDsAndy Shevchenko
Add Intel Meteor Lake-P LPSS PCI IDs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628223047.34301-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: mt6397: Add basic support for MT6331+MT6332 PMICAngeloGioacchino Del Regno
Add support for the MT6331 PMIC with MT6332 Companion PMIC, found in MT6795 Helio X10 smartphone platforms. This combo has support for multiple devices but, for a start, only the following have been implemented: - Regulators (two instances, one in MT6331, one in MT6332) - RTC (MT6331) - Keys (MT6331) - Interrupts (MT6331 also dispatches MT6332's interrupts) There's more to be implemented, especially for MT6332, which will come at a later stage. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220627123954.64299-1-angelogioacchino.delregno@collabora.com
2022-07-19mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cellsSamuel Holland
These PMICs all contain a compatible GPIO controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616060915.48325-3-samuel@sholland.org
2022-07-19mfd: db8500-prcmu: Drop duplicated word "the" in the commentsJiang Jian
There is an unexpected word "the" in the comments that needs to be dropped. Line 801: * This function sets the the operating point of the ARM. ------- Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220621103839.96847-1-jiangjian@cdjrlc.com
2022-07-19mfd: intel_soc_pmic_chtwc: Switch from __maybe_unused to pm_sleep_ptr() etcAndy Shevchenko
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less heavier for builds than the use of __maybe_unused attributes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616171009.43524-2-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_chtwc: Use dev_err_probe()Andy Shevchenko
Simplify the mux error path a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616171009.43524-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: tc6393xb: Make disable callback return voidUwe Kleine-König
All implementations return 0, so simplify accordingly. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220619082655.53728-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: dln2: Automatically detect and fill endpoint pointersAndy Shevchenko
The usb_find_common_endpoints() finds and fills the endpoints in accordance with their types. Use it to automatically detect and fill endpoint pointers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220617182338.32402-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: pm8008: Remove driver data structure pm8008_dataLee Jones
Maintaining a local driver data structure that is never shared outside of the core device is an unnecessary complexity. Half of the attributes were not used outside of a single function, one of which was not used at all. The remaining 2 are generic and can be passed around as required. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-07-19mfd: twl: Remove platform data supportUwe Kleine-König
There is no in-tree machine that provides a struct twl4030_platform_data since commit e92fc4f04a34 ("ARM: OMAP2+: Drop legacy board file for LDP"). So assume dev_get_platdata() returns NULL in twl_probe() and simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220614152148.252820-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: cros_ec: Add SCP Core-1 as a new CrOS EC MCUTinghan Shen
MT8195 System Companion Processors(SCP) is a dual-core RISC-V MCU. Add a new CrOS feature ID to represent the SCP's 2nd core. The 1st core is referred to as 'core 0', and the 2nd core is referred to as 'core 1'. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220601112201.15510-16-tinghan.shen@mediatek.com
2022-07-19mfd: mt6358-irq: Add MT6357 PMIC supportFabien Parent
Add MT6357 PMIC IRQ support. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-6-fparent@baylibre.com
2022-07-19mfd: mt6397-core: Add MT6357 PMIC supportFabien Parent
Adds support for PMIC keys, Regulator, and RTC for the MT6357 PMIC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-5-fparent@baylibre.com
2022-07-19mfd: max77620: Fix refcount leak in max77620_initialise_fpsMiaoqian Lin
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 327156c59360 ("mfd: max77620: Add core driver for MAX77620/MAX20024") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com
2022-07-19syscon: Use %pa to format the variable of resource_size_t typeAndy Shevchenko
Instead of explicit casting, use %pa specifier to format the variable of resource_size_t type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531202404.70282-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: t7l66xb: Drop platform disable callbackUwe Kleine-König
None of the in-tree instantiations of struct t7l66xb_platform_data provides a disable callback. So better don't dereference this function pointer unconditionally. As there is no user, drop it completely instead of calling it conditional. This is a preparation for making platform remove callbacks return void. Fixes: 1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de
2022-07-19mfd: asic3: Make asic3_gpio_remove() return voidUwe Kleine-König
Up to now asic3_gpio_remove() returns zero unconditionally. This makes it easier to see in the caller that there is no error to handle. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-2-u.kleine-koenig@pengutronix.de
2022-07-19mfd: max77714: Update Luca Ceresoli's e-mail addressLuca Ceresoli
My Bootlin address is preferred from now on. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220603155727.1232061-4-luca@lucaceresoli.net
2022-07-19Merge branches 'ib-mfd-acpi-for-rafael-5.20', ↵Lee Jones
'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-5.20' and 'ib-mfd-soc-bcm-5.20' into ibs-for-mfd-merged
2022-07-14mfd: lpc_ich: Add support for pinctrl in non-ACPI systemTan Jui Nee
Add support for non-ACPI systems, such as system that uses Advanced Boot Loader (ABL) whereby a platform device has to be created in order to bind with pin control and GPIO. At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass the PCI BAR address to GPIO. Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14mfd: lpc_ich: Switch to generic p2sb_bar()Andy Shevchenko
Instead of open coding p2sb_bar() functionality we are going to use generic library. There is one more user en route. This is more than just a clean-up. It also fixes a potential issue seen when SPI BAR is 64-bit. The current code works if and only if the PCI BAR of the hidden device is inside 4G address space. In case when firmware decides to go above 4G, we will get a wrong address. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()Andy Shevchenko
Factor out duplicate code to lpc_ich_enable_spi_write() helper function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-04mfd: bcm2835-pm: Add support for BCM2711Stefan Wahren
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one. As per the devicetree bindings, BCM2711 will provide both the old and new ASB resources, so get both of them and pass them into 'bcm2835-power,' which will take care of selecting which one to use accordingly. Since the RPiVid ASB's resources were being provided prior to formalizing the bindings[1], also support the old DT files that didn't use 'reg-names.' [1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-8-stefan.wahren@i2se.com
2022-07-04mfd: bcm2835-pm: Use 'reg-names' to get resourcesNicolas Saenz Julienne
If available in firmware, find resources by their 'reg-names' position instead of relying on hardcoded offsets. Care is taken to support old firmware nonetheless. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-7-stefan.wahren@i2se.com
2022-06-27mfd: core: Use acpi_dev_for_each_child()Rafael J. Wysocki
Instead of walking the list of children of an ACPI device directly, use acpi_dev_for_each_child() to carry out an action for all of the given ACPI device's children. This will help to eliminate the children list head from struct acpi_device as it is redundant and it is used in questionable ways in some places (in particular, locking is needed for walking the list pointed to it safely, but it is often missing). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/2726954.BEx9A2HvPv@kreacher
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-23mfd: rt4831: Improve error reporting for problems during .remove()Uwe Kleine-König
Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220502191012.53259-1-u.kleine-koenig@pengutronix.de
2022-05-23mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()Yang Yingliang
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: b5e29aa880be ("mfd: davinci_voicecodec: Remove pointless #include") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com
2022-05-23mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7Gaggery Tsai
Added 8086:51d8 and 8086:51d9 to the intel_lpss_pci driver. They are Intel Alder Lake-P i2c controllers. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220520193537.26090-1-gaggery.tsai@intel.com
2022-05-07ARM/pxa/mfd/power/sound: Switch Tosa to GPIO descriptorsLinus Walleij
The Tosa device (Sharp SL-6000) has a mishmash driver set-up for the Toshiba TC6393xb MFD that includes a battery charger and touchscreen and has some kind of relationship to the SoC sound driver for the AC97 codec. Other devices define a chip like this but seem only half-implemented, not really handling battery charging etc. This patch switches the Toshiba MFD device to provide GPIO descriptors to the battery charger and SoC codec. As a result some descriptors need to be moved out of the Tosa boardfile and new one added: all SoC GPIO resources to these drivers now comes from the main boardfile, while the MFD provide GPIOs for its portions. As a result we can request one GPIO from our own GPIO chip and drop two hairy callbacks into the board file. This platform badly needs to have its drivers split up and converted to device tree probing to handle this quite complex relationship in an orderly manner. I just do my best in solving the GPIO descriptor part of the puzzle. Please don't ask me to fix everything that is wrong with these driver to todays standards, I am just trying to fix one aspect. I do try to use modern devres resource management and handle deferred probe using new functions where appropriate. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-28mfd: twl4030: Make twl4030_exit_irq() return voidUwe Kleine-König
If twl4030_exit_irq() returns an error, the effect is that the caller (twl_remove()) forwards the error to the i2c core without unregistering its dummy slave devices. This only makes the i2c core emit another error message and then it still removes the device. In this situation it doesn't make sense to abort the remove cleanup and not unregister the slave devices. So do that. Then return value is actually unused and twl4030_exit_irq() can better be changed to return no value at all. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220113101430.12869-3-u.kleine-koenig@pengutronix.de
2022-04-28mfd: twl6030: Make twl6030_exit_irq() return voidUwe Kleine-König
This function returns 0 unconditionally, so there is no benefit in returning a value at all and make the caller do error checking. Also the caller (twl_remove()) cannot do anything sensible with an error code. Passing it up the call stack isn't a good option because the i2c core ignores error codes (apart from emitting an error message). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220113101430.12869-2-u.kleine-koenig@pengutronix.de
2022-04-27mfd: sprd: Jugle {of,spi}_device_id tables into numerical orderCixi Geng
Ordered with the smallest number at the top. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220427075212.3409407-1-gengcixi@gmail.com
2022-04-27mfd: sprd: Add SC2730 PMIC to SPI device ID tableCixi Geng
Add the SC2730 PMIC support for module autoloading through SPI modalises. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220425132410.2708304-1-gengcixi@gmail.com
2022-04-26mfd: cros_ec_dev: Only register PCHG device if presentStephen Boyd
Don't create a device for the peripheral charger (PCHG) if there aren't any peripheral charger ports. This removes a device on most ChromeOS systems, because the peripheral charger functionality isn't always present. Cc: Prashant Malani <pmalani@chromium.org> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Daisuke Nojiri <dnojiri@chromium.org> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: <chrome-platform@lists.linux.dev> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220419000408.3202635-1-swboyd@chromium.org
2022-04-26mfd: mt6397-core: Add resources for PMIC keys for MT6359Fabien Parent
Add the MFD resources in order to be able to probe and use the keyboard driver for the MT6359 PMIC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220415153629.1817202-4-fparent@baylibre.com
2022-04-26mfd: ipaq-micro: Fix error check return value of platform_get_irq()Lv Ruyi
platform_get_irq() return negative value on failure, so null check of irq is incorrect. Fix it by comparing whether it is less than zero. Fixes: dcc21cc09e3c ("mfd: Add driver for Atmel Microcontroller on iPaq h3xxx") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220412085305.2533030-1-lv.ruyi@zte.com.cn
2022-04-26mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interfaceMaíra Canal
Considering the current transition of the GPIO subsystem, remove all dependencies of the legacy GPIO interface (linux/gpio.h and linux /of_gpio.h) and replace it with the descriptor-based GPIO approach. Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/Yk2maZuf+5FGL+eg@fedora
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-25Merge tag 'for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Introduce "Bypass" charging type used by USB PPS standard - Refactor power_supply_set_input_current_limit_from_supplier() - Add fwnode support to power_supply_get_battery_info() Drivers: - ab8500: continue migrating towards using standard core APIs - axp288 fuel-gauge: refactor driver to be fully resource managed - battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info - bq24190: disable boost regulator on shutdown - bq24190: add support for battery-info on ACPI based systems - bq25890: prepare driver for usage on ACPI based systems - bq25890: add boost regulator support - cpcap-battery: add NVMEM based battery detection support - injoinic ip5xxx: new driver for power bank IC - upi ug3105: new battery driver - misc small improvements and fixes" * tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits) power: ab8500_chargalg: Use CLOCK_MONOTONIC power: supply: Add a driver for Injoinic power bank ICs dt-bindings: trivial-devices: Add Injoinic power bank ICs dt-bindings: vendor-prefixes: Add Injoinic power: supply: ab8500: Remove unused variable power: supply: da9150-fg: Remove unnecessary print function dev_err() power: supply: ab8500: fix a handful of spelling mistakes power: supply: ab8500_fg: Account for line impedance dt-bindings: power: supply: ab8500_fg: Add line impedance power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning power: supply: wm8350-power: Add missing free in free_charger_irq power: supply: wm8350-power: Handle error for wm8350_register_irq power: supply: Static data for Samsung batteries power: supply: ab8500_fg: Use VBAT-to-Ri if possible power: supply: Support VBAT-to-Ri lookup tables power: supply: ab8500: Standardize BTI resistance power: supply: ab8500: Standardize alert mode charging power: supply: ab8500: Standardize maintenance charging power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on ...
2022-03-23mfd: bd9576: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220314115354.144023-29-Julia.Lawall@inria.fr
2022-03-23mfd: Use platform_get_irq() to get the interruptMinghao Chi (CGEL ZTE)
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. The print function dev_err() is redundant because platform_get_irq() already prints an error. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220309035607.2080884-1-chi.minghao@zte.com.cn
2022-03-23mfd: arizona-spi: Add Android board ACPI table handlingHans de Goede
x86/ACPI boards with an arizona WM5102 codec ship with either Windows or Android as factory installed OS. The ACPI fwnode for the codec on Android boards misses 2 things compared to the Windows boards (this is hardcoded in the Android board kernels): 1. There is no CLKE ACPI method to enabe the 32 KHz clock the codec needs for jack-detection. 2. The GPIOs used by the codec are not listed in the fwnode for the codec. The ACPI tables on x86/ACPI boards shipped with Android being incomplete happens a lot. The special drivers/platform/x86/x86-android-tablets.c module contains DMI based per model handling to compensate for this. This module will enable the 32KHz clock through the pinctrl framework to fix 1. and it will also register a gpio-lookup table for all GPIOs needed by the codec + machine driver, including the GPIOs coming from the codec itself. Add an arizona_spi_acpi_android_probe() function which waits for the x86-android-tablets to have set things up before continue with probing the arizona WM5102 codec. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220307173844.199135-2-hdegoede@redhat.com
2022-03-23mfd: arizona-spi: Split Windows ACPI init code into its own functionHans de Goede
x86/ACPI boards with an arizona WM5102 codec ship with either Windows or Android as factory installed OS. The ACPI fwnode describing the codec differs depending on the factory OS, and the current arizona_spi_acpi_probe() function is tailored for use with the Windows board ACPI tables. Split out the Windows board ACPI tables specific bits into a new arizona_spi_acpi_windows_probe() function in preparation for also adding support for the Android board ACPI tables. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220307173844.199135-1-hdegoede@redhat.com
generated by cgit (git 2.34.1) at 2025-03-19 10:34:50 +0000