summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-05Merge tag 'pm-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...
2017-09-05mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variantsHans de Goede
Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. This commits makes the intel_soc_pmic_core code check the _HRV of the ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp. intel_soc_pmic_config_cht_crc based on this. This fixes the Bay Trail specific ACPI OpRegion code causing problems on Cherry Trail devices. Specifically this was causing the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver") Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHTHans de Goede
Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. Looking at the android x86 kernel sources where most of the Crystal Cove code comes from, it talks about "Valley View", "Bay Trail" and / or BYT without ever mentioning Cherry Trail, with the exception of the regulator driver. The Asus Zenfone-2 kernel code has 2 regulator drivers, one for Crystal Cove and one for what it calls Crystal Cove Plus. The Crystal Cove Plus regulator driver is the only one to mention Cherry Trail and that driver uses different register addresses then the normal (Bay Trail) Crystal Cove regulator driver, showing that at least the regulator register addresses are different. The GPIO code should work on both, and the PWM code is known to work on both and is necessary for backlight control on some Cherry Trail devices. Testing has shown that the ACPI OpRegion code otoh is causing problems on Cherry Trail devices, which is not surprising as it deals with the regulators and those have different register addresses on CHT. Specifically the ACPI OpRegion code causes the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. This commit replaces the single mfd_cell array currently used for Crystal Cove with 2 separate arrays, one for the Bay Trail variant and one for the Cherry Trail variant, note that the Cherry Trail version of the array only contains gpio and pwm cells. The PMIC OpRegion cell is deliberately not included and drivers for the other cells in the Bay Trail cell array were never upstreamed. Fixes: 7cf0a66f32 ("mfd: intel_soc_pmic: Crystal Cove support") Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: omap-usb-tll: Fix register offsetsArnd Bergmann
gcc-8 notices that the register number calculation is wrong when the offset is an 'u8' but the number is larger than 256: drivers/mfd/omap-usb-tll.c: In function 'omap_tll_init': drivers/mfd/omap-usb-tll.c:90:46: error: overflow in conversion from 'int' to 'u8 {aka unsigned char}' chages value from 'i * 256 + 2070' to '22' [-Werror=overflow] This addresses it by always using a 32-bit offset number for the register. This is apparently an old problem that previous compilers did not find. Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: da9052: Constify spi_device_idArvind Yadav
spi_device_id are not supposed to change at runtime. All functions working with spi_device_id provided by <linux/i2c.h> work with const spi_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspendFurquan Shaikh
Commit 274e43edcda6f ("mfd: intel-lpss: Do not put device in reset state on suspend") changed the behavior on suspend by not putting LPSS controllers into reset. This was done because S3/S0ix fail if UART device is put into reset and no_console_suspend flag is enabled. Because of the above change, I2C controller gets into a bad state if it observes that the I2C lines are pulled low when power to I2C device is cut off during suspend (generally, I2C lines are pulled to power rail of the I2C device in order to ensure that there is no leakage because of the pulls when device is turned off). This results in the controller timing out for all future I2C operations after resume. It is primarily because of the following sequence of operations: During suspend: 1. I2C controller is disabled, but it is not put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. ==> At this point the I2C controller gets into a bad state On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled. However, even after enabling the I2C controller, all future I2C xfers fail since the controller is in a bad state and does not attempt to make any transactions and hence times out. In order to ensure that the controller does not get into a bad state, this change puts it into reset if the controller type is not UART. With this change, the order of operations is: During suspend: 1. I2C controller is disabled and put into reset. 2. Power to I2C device is cut off. 3. #2 results in the I2C lines being pulled low. On resume: 1. Power to I2C device is enabled. 2. #2 results in the I2C lines being pulled high. 3. I2C controller is enabled and taken out of reset. Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: da9055: Constify i2c_device_idArvind Yadav
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devicesFlorian R. Hölzlwimmer
This patch adds a missing PCI ID of the Intel Sunrise Point chipset to the Intel LPSS driver. It fixes a bug causing the touchpad of the Lenovo Yoga 720-15 not to be recognized. See also bug 1700657 on bugs.launchpad.net. Many thanks to CoolStar, who found this solution! Reported-by: CoolStar <coolstarorganization@gmail.com> Tested-by: Mike Schwartz <mykesx@gmail.com> Tested-by: Björn Dahlgren <bjodah@gmail.com> Signed-off-by: Florian R. Hölzlwimmer <git.ich@frhoelzlwimmer.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: t7l66xb: Handle return value of clk_prepare_enableArvind Yadav
clk_prepare_enable() can fail here and we must check its return value. we must disable clock, if t7l66xb_probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a boolHans de Goede
The PMIC provides ACPI OpRegions which must be available for other drivers' PS0 / PS3 methods early-on as such it must be builtin as the Kconfig help text already states. Somehow its Kconfig option ended up being a tristate though, this fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: lp87565: Convert to use devm_mfd_add_devices()Axel Lin
This fixes missing mfd_remove_devices() call when unload the module. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: Add support for TPS68470 deviceRajmohan Mani
The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators. This patch adds support for TPS68470 mfd device. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/BroadwellMika Westerberg
At least on Lenovo Thinkpad Yoga, the BIOS seems to monitor the SPI-NOR write protection bit and if it is flipped to read/write it assumes the BIOS configuration was changed on next reboot. It then, for unknown reasons, resets the BIOS settings back to default. We can prevent this by just leaving the write protection bit intact and let the SPI-NOR driver know whether the device is writable or not. In case of this particular Lenovo the SPI-NOR flash will be exposed as read-only. Fixes: ff00d7a32a1b ("mfd: lpc_ich: Add support for SPI serial flash host controller") Link: https://bugzilla.kernel.org/show_bug.cgi?id=195951 Reported-by: Abdó Roig-Marange <abdo.roig@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: syscon: atmel-smc: Add helper to retrieve register layoutLudovic Desroches
For HSMC controller, the register layout depends on the device i.e. the offset of setup, pulse, cycle, mode and timings registers is not the same. An helper is added to provide the correct register layout. Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation") Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: axp20x: Use correct platform device ID for many PEKQuentin Schulz
According to their datasheets, the AXP221, AXP223, AXP288, AXP803, AXP809 and AXP813 PEK have different values for startup time bits from the AXP20X, let's use the platform device id with the correct values. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: axp20x: Add support for AXP813 PMICChen-Yu Tsai
The X-Powers AXP813 PMIC is normally used with Allwinner's A83T SoC. It has the same range of functions as other X-Powers PMICs, such as DC-DC buck converter and linear regulator outputs, AC-IN and VBUS power supplies, power button trigger, GPIOs, ADCs, and a battery charger. Note that the IRQ table given in the datasheet is incorrect: in IRQ enable/status registers 1, there are separate IRQs for ACIN and VBUS, instead of bits [7:5] being the same as bits [4:2]. So it shares the same IRQs as the AXP803, rather than the AXP288. This patch adds basic mfd support for it, with only the power button enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: Add ROHM BD9571MWV-M MFD PMIC driverMarek Vasut
Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS entry. The MFD part only specifies the regmap bits for the PMIC and binds the subdevs together. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: hi6421-pmic: Add support for HiSilicon Hi6421v530Guodong Xu
Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with main SoC via memory-mapped I/O. Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon, but at different revisions. They share the same memory-mapped I/O design. They differ in integrated devices, such as regulator details, LDO voltage points. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: hi6421-pmic: Update dev_err messagesGuodong Xu
Update dev_err messages to make them more readable. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: hi6421-pmic: Change license text to shorter formGuodong Xu
Change license text to a shorter form of GPLv2. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: Kconfig: Add missing Kconfig dependency for TPS65086Michal Simek
MTF_CORE should be enabled when driver is enabled. Without this patch you can configure: CONFIG_MFD_CORE is not set CONFIG_MFD_TPS65086=y ... which ends up with compilation error: drivers/mfd/tps65086.o: In function `tps65086_probe': drivers/mfd/tps65086.c:110: undefined reference to `mfd_add_devices' drivers/mfd/tps65086.c:110:(.text+0x128): relocation truncated to fit: \ R_AARCH64_CALL26 against undefined symbol `mfd_add_devices' Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: ab8500-core: Constify attribute_group structuresArvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 16298 1009 184 17491 4453 drivers/mfd/ab8500-core.o File size After adding 'const': text data bss dec hex filename 16490 817 184 17491 4453 drivers/mfd/ab8500-core.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: max8998: Fix potential NULL pointer dereferenceChristophe JAILLET
if 'max8998_i2c_parse_dt_pdata() fails (when out of memory), a NULL pointer dereference will occur in the error handling code. Return directly instead. Fixes: ee999fb3f17f("mfd: max8998: Add support for Device Tree") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: max8925-i2c: Drop unnecessary staticJulia Lawall
Drop static on a local variable, when the variable is initialized before any use, on every possible execution path through the function. The static has no benefit, and dropping it reduces the code size. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> The change in code size is indicates by the following output from the size command. before: text data bss dec hex filename 2579 240 16 2835 b13 drivers/mfd/max8925-i2c.o after: text data bss dec hex filename 2531 240 8 2779 adb drivers/mfd/max8925-i2c.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: da9052: Fix manual ADC read after timed out readSebastian Reichel
It is possible that under heavy system load, the counter in the completion struct, used for waiting for end of AD conversion, gets incremented twice. To make sure the driver recovers from this situation, the completion struct should be reinitialized. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: rtsx: Make arrays depth and cd_mask static constColin Ian King
Don't populate the arrays depath and cd_mask on the stack but make them static const. Makes the object code smaller: text data bss dec hex filename 25413 7216 448 33077 8135 drivers/mfd/rtsx_pcr.o text data bss dec hex filename 25151 7360 448 32959 80bf drivers/mfd/rtsx_pcr.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05mfd: twl-core: Improve the documentationDan Carpenter
Saying it "returns the result" seems tautological. The read function does not return num_bytes on success, it returns zero on success. I noticed this discrepancy because some of the callers were checking for >= 0. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', ↵Lee Jones
'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged
2017-09-04mfd: Add STM32 LPTimer driverFabrice Gasnier
STM32 Low-Power Timer hardware block can be used for: - PWM generation - IIO trigger (in sync with PWM) - IIO quadrature encoder counter PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-04mfd: twl: Move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-03Merge tag 'hwmon-for-linus-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new drivers: - Lantiq CPU temperature sensor - IBM CFF power supply - TPS53679 PMBus driver - new support: - LM5066I (lm25066 PMBus driver) - Intel VID protocol VR13 (PMBus drivers) - CAT34TS02C, GT30TS00, GT34TS02, and CAT34TS04 (jc42 driver) - cleanup and minor improvements in several drivers * tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits) hwmon: (ltq-cputemp) add cpu temp sensor driver hwmon: (ltq-cputemp) add devicetree bindings documentation hwmon: (pmbus) Add support for Texas Instruments tps53679 device hwmon: (asc7621) make several arrays static const hwmon: (pmbus/lm25066) Add support for TI LM5066I hwmon: (pmbus/lm25066) Offset coefficient depends on CL hwmon: (pmbus) Add support for Intel VID protocol VR13 Documentation: hwmon: Document the IBM CFF power supply hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driver dt-bindings: hwmon: Document the IBM CCF power supply version 1 hwmon: (ftsteutates) constify i2c_device_id hwmon: da9052: Add support for TSI channel mfd: da9052: Make touchscreen registration optional hwmon: da9052: Replace S_IRUGO with 0444 mfd: da9052: Add register details for TSI hwmon: (aspeed-pwm) add THERMAL dependency hwmon: (pmbus) Add debugfs for status registers hwmon: (aspeed-pwm-tacho) cooling device support. Documentation: dt-bindings: aspeed-pwm-tacho cooling device. hwmon: (pmbus): Add generic alarm bit for iin and pin ...
2017-09-04Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (33 commits) cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpufreq: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms cpufreq: dbx500: Delete obsolete driver mfd: db8500-prcmu: Get rid of cpufreq dependency cpufreq: enable the DT cpufreq driver on the Ux500 cpufreq: Loongson2: constify platform_device_id cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver cpufreq: remove setting of policy->cpu in policy->cpus during init cpufreq: mediatek: add support of cpufreq to MT7622 SoC cpufreq: mediatek: add cleanups with the more generic naming cpufreq: rcar: Add support for R8A7795 SoC cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver cpufreq: s5pv210: add missing of_node_put() cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency ...
2017-08-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A small number of bugfixes, again nothing serious. - Alexander Dahl found multiple bugs in the Atmel memory interface driver - A randconfig build fix for at91 was incomplete, the second attempt fixes the remaining corner case - One fix for the TI Keystone queue handler - The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos: add needs-hpd for Odroid-XU3/4 ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create memory: atmel-ebi: Fix smc cycle xlate converter memory: atmel-ebi: Allow t_DF timings of zero ns memory: atmel-ebi: Fix smc timing return value evaluation
2017-08-22mfd: db8500-prcmu: Get rid of cpufreq dependencyLinus Walleij
The ARMSS clock, also known as the operating point of the CPU, should not cross-depend on cpufreq like this. Move the code to use just frequencies and remove the false frequency (1GHz) and put in the actual frequency provided by the ARMSS clock (998400000 Hz) as part of the process. After this and the related cpufreq patch, the DB8500 will simply use the standard DT cpufreq driver to change the operating points through the common clock framework using the ARMSS clock. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-22Revert "mfd: da9061: Fix to remove BBAT_CONT register from chip model"Lee Jones
This patch was applied to the MFD twice, causing unwanted behavour. This reverts commit b77eb79acca3203883e8d8dbc7f2b842def1bff8. Fixes: b77eb79acca3 ("mfd: da9061: Fix to remove BBAT_CONT register from chip model") Reported-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-22mfd: da9052: Make touchscreen registration optionalSebastian Reichel
If the touchscreen pins are used as general purpose analogue input, the touchscreen driver should not be used. The pins will be handled by the existing hwmon driver instead. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 power key supportJoseph Chen
Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 pinctrl supportJoseph Chen
Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Add RK805 supportElaine Zhang
The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking Both RK808 and RK805 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-21mfd: rk808: Fix up the chip id get failedElaine Zhang
the rk8xx chip id is: ((MSB << 8) | LSB) & 0xfff0 Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-15mfd: tps65010: Move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-15mfd: dm355evm_msp: Move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-26memory: atmel-ebi: Fix smc cycle xlate converterAlexander Dahl
The converter function for translating ns timings in register values was initialized with a wrong function pointer. This resulted in wrong register values also for the setup and pulse registers when configuring the EBI interface trough dts. Includes a small fix in a comment of the smc driver, which was probably just a copy'n'paste mistake. Signed-off-by: Alexander Dahl <ada@thorsis.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-18mfd: tps6105x: Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have a OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-18mfd: retu: Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have a OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-18mfd: retu: Drop -mfd suffix from I2C device ID nameJavier Martinez Canillas
It's not correct to encode the subsystem in the I2C device name, so drop the -mfd suffix. To maintain bisect-ability, change driver and platform code / DTS users in the same patch. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-11Merge tag 'chrome-platform-for-linus-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: "Changes in this pull request are around catching up cros_ec with the internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and cros_ec_lightbar. Also, switching maintainership from olof to bleung" * tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome : Add myself as Maintainer platform/chrome: cros_ec_lightbar - hide unused PM functions cros_ec: Don't signal wake event for non-wake host events cros_ec: Fix deadlock when EC is not responsive at probe cros_ec: Don't return error when checking command version platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI platform/chrome: cros_ec_lpc: Add power management ops platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device platform/chrome: cros_ec_lpc: Add support for mec1322 EC platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants mfd: cros_ec: Add support for dumping panic information cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer() mfd: cros_ec: add debugfs, console log file mfd: cros_ec: Add EC console read structures definitions mfd: cros_ec: Add helper for event notifier.