summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20Merge tag 'mfd-for-linus-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add new driver for MAXIM MAX77620/MAX20024 PMIC - Add new driver for Hisilicon HI665X PMIC New Device Support: - Add support for AXP809 in axp20x-rsb - Add support for Power Supply in axp20x New core features: - devm_mfd_* managed resources Fix-ups: - Remove unused code (da9063-irq, wm8400-core, tps6105x, smsc-ece1099, twl4030-power) - Improve clean-up in error path (intel_quark_i2c_gpio) - Explicitly include headers (syscon.h) - Allow building as modules (max77693) - Use IS_ENABLED() instead of rolling your own (dm355evm_msp, wm8400-core) - DT adaptions (axp20x, hi655x, arizona, max77620) - Remove CLK_IS_ROOT flag (intel-lpss, intel_quark) - Move to gpiochip API (asic3, dm355evm_msp, htc-egpio, htc-i2cpld, sm501, tc6393xb, tps65010, ucb1x00, vexpress) - Make use of devm_mfd_* calls (act8945a, as3711, atmel-hlcdc, bcm590xx, hi6421-pmic-core, lp3943, menf21bmc, mt6397, rdc321x, rk808, rn5t618, rt5033, sky81452, stw481x, tps6507x, tps65217, wm8400) Bug Fixes" - Fix ACPI child matching (mfd-core) - Fix start-up ordering issues (mt6397-core, arizona-core) - Fix forgotten register state on resume (intel-lpss) - Fix Clock related issues (twl6040) - Fix scheduling whilst atomic (omap-usb-tll) - Kconfig changes (vexpress)" * tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: hi655x: Add MFD driver for hi655x mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between" mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024 mfd: max77620: Add core driver for MAX77620/MAX20024 mfd: arizona: Add defines for GPSW values that can be used from DT mfd: omap-usb-tll: Fix scheduling while atomic BUG mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatile mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICs mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip mfd: twl4030-power: Remove driver path in file comment MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers mfd: smsc-ece1099: Remove unnecessarily remove callback mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULE ...
2016-05-18mfd: hi655x: Add MFD driver for hi655xChen Feng
Add PMIC MFD driver to support hisilicon hi665x. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-17Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-05-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-09mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between"Colin Ian King
fix spelling mistake, beetween -> between Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependencyArnd Bergmann
The MFD_VEXPRESS_SYSREG driver selects CLKSRC_MMIO, which in turn conflicts with ARCH_USES_GETTIMEOFFSET, causing a harmless Kconfig warning when it is set: warning: (ARCH_MVEBU && ARCH_DIGICOLOR && ARCH_GEMINI && ARCH_KEYSTONE && ARCH_MOXART && ARCH_MXS && PLAT_SPEAR && ARCH_SUNXI && ARCH_TEGRA && ARCH_U300 && PLAT_ORION && ARCH_CLPS711X && ARCH_EP93XX && ARCH_NETX && ARCH_IXP4XX && ARCH_KS8695 && ARCH_W90X900 && ARCH_PXA && ARCH_SA1100 && ARCH_OMAP1 && ARCH_BCM_IPROC && ARCH_INTEGRATOR_AP && ARCH_OMAP2PLUS && MFD_VEXPRESS_SYSREG) selects CLKSRC_MMIO which has unmet direct dependencies (!ARCH_USES_GETTIMEOFFSET) This was apparently hidden by the fact that no ARM platform that still sets ARCH_USES_GETTIMEOFFSET has gpiolib support, and we already have a dependency on GPIOLIB that I added a while ago. However, after 296ad4acb8ef ("gpio: remove deps on ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB"), any platform can enable CONFIG_GPIOLIB, and that lets us enable MFD_VEXPRESS_SYSREG as well. This adds an explicit dependency on !ARCH_USES_GETTIMEOFFSET to guarantee that we can enable the CLKSRC_MMIO driver without getting warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: max77620: Add core driver for MAX77620/MAX20024Laxman Dewangan
MAX77620/MAX20024 are Power Management IC from the MAXIM. It supports RTC, multiple GPIOs, multiple DCDC and LDOs, watchdog, clock etc. Add MFD drier to provides common support for accessing the device; additional drivers is developed on respected subsystem in order to use the functionality of the device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: omap-usb-tll: Fix scheduling while atomic BUGRoger Quadros
We shouldn't be calling clk_prepare_enable()/clk_prepare_disable() in an atomic context. Fixes the following issue: [ 5.830970] ehci-omap: OMAP-EHCI Host Controller driver [ 5.830974] driver_register 'ehci-omap' [ 5.895849] driver_register 'wl1271_sdio' [ 5.896870] BUG: scheduling while atomic: udevd/994/0x00000002 [ 5.896876] 4 locks held by udevd/994: [ 5.896904] #0: (&dev->mutex){......}, at: [<c049597c>] __driver_attach+0x60/0xac [ 5.896923] #1: (&dev->mutex){......}, at: [<c049598c>] __driver_attach+0x70/0xac [ 5.896946] #2: (tll_lock){+.+...}, at: [<c04c2630>] omap_tll_enable+0x2c/0xd0 [ 5.896966] #3: (prepare_lock){+.+...}, at: [<c05ce9c8>] clk_prepare_lock+0x48/0xe0 [ 5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine [ 5.897048] Preemption disabled at:[< (null)>] (null) [ 5.897051] [ 5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233 [ 5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 5.897076] [<c010e714>] (unwind_backtrace) from [<c010af34>] (show_stack+0x10/0x14) [ 5.897087] [<c010af34>] (show_stack) from [<c040aa7c>] (dump_stack+0x88/0xc0) [ 5.897099] [<c040aa7c>] (dump_stack) from [<c020c558>] (__schedule_bug+0xac/0xd0) [ 5.897111] [<c020c558>] (__schedule_bug) from [<c06f3d44>] (__schedule+0x88/0x7e4) [ 5.897120] [<c06f3d44>] (__schedule) from [<c06f46d8>] (schedule+0x9c/0xc0) [ 5.897129] [<c06f46d8>] (schedule) from [<c06f4904>] (schedule_preempt_disabled+0x14/0x20) [ 5.897140] [<c06f4904>] (schedule_preempt_disabled) from [<c06f64e4>] (mutex_lock_nested+0x258/0x43c) [ 5.897150] [<c06f64e4>] (mutex_lock_nested) from [<c05ce9c8>] (clk_prepare_lock+0x48/0xe0) [ 5.897160] [<c05ce9c8>] (clk_prepare_lock) from [<c05d0e7c>] (clk_prepare+0x10/0x28) [ 5.897169] [<c05d0e7c>] (clk_prepare) from [<c04c2668>] (omap_tll_enable+0x64/0xd0) [ 5.897180] [<c04c2668>] (omap_tll_enable) from [<c04c1728>] (usbhs_runtime_resume+0x18/0x17c) [ 5.897192] [<c04c1728>] (usbhs_runtime_resume) from [<c049d404>] (pm_generic_runtime_resume+0x2c/0x40) [ 5.897202] [<c049d404>] (pm_generic_runtime_resume) from [<c049f180>] (__rpm_callback+0x38/0x68) [ 5.897210] [<c049f180>] (__rpm_callback) from [<c049f220>] (rpm_callback+0x70/0x88) [ 5.897218] [<c049f220>] (rpm_callback) from [<c04a0a00>] (rpm_resume+0x4ec/0x7ec) [ 5.897227] [<c04a0a00>] (rpm_resume) from [<c04a0f48>] (__pm_runtime_resume+0x4c/0x64) [ 5.897236] [<c04a0f48>] (__pm_runtime_resume) from [<c04958dc>] (driver_probe_device+0x30/0x70) [ 5.897246] [<c04958dc>] (driver_probe_device) from [<c04959a4>] (__driver_attach+0x88/0xac) [ 5.897256] [<c04959a4>] (__driver_attach) from [<c04940f8>] (bus_for_each_dev+0x50/0x84) [ 5.897267] [<c04940f8>] (bus_for_each_dev) from [<c0494e40>] (bus_add_driver+0xcc/0x1e4) [ 5.897276] [<c0494e40>] (bus_add_driver) from [<c0496914>] (driver_register+0xac/0xf4) [ 5.897286] [<c0496914>] (driver_register) from [<c01018e0>] (do_one_initcall+0x100/0x1b8) [ 5.897296] [<c01018e0>] (do_one_initcall) from [<c01c7a54>] (do_init_module+0x58/0x1c0) [ 5.897304] [<c01c7a54>] (do_init_module) from [<c01c8a3c>] (SyS_finit_module+0x88/0x90) [ 5.897313] [<c01c8a3c>] (SyS_finit_module) from [<c0107120>] (ret_fast_syscall+0x0/0x1c) [ 5.912697] ------------[ cut here ]------------ [ 5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58 [ 5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count()) Cc: <stable@vger.kernel.org> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatileRichard Fitzgerald
Some of the bits in this register can be changed by the codec so we must mark it volatile. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICsMichael Haas
As a counterpart to the usb power_supply cell, this commit adds an AC power_supply cell to the axp20x driver. Still missing are the RTC backup battery and the main battery charger cells. Signed-off-by: Michael Haas <haas@computerlinguist.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctlyVille Syrjälä
GPIO lookup tables are supposed to be zero terminated. Let's do that and avoid accidentally walking off the end. Cc: stable@vger.kernel.org Fixes: 61dd2ca2d44e ("mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irqLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_request_threaded_irq() for IRQ registration. This reduces the need of remove callback for removing MFD child devices and unregistering IRQ. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl4030-power: Remove driver path in file commentJavier Martinez Canillas
The driver's file path in the comment is wrong, so just remove it since these tends to get out of date and they serve very little purpose. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: smsc-ece1099: Remove unnecessarily remove callbackLaxman Dewangan
SMSC MFD driver does not add any MFD child devices via mfd_add_devices() and hence it is not required to call mfd_remove_devices() to remove MFD child devices. Remove the call of the API mfd_remove_devices() which will result as remove of .remove callback for driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULEJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl6040: Disable and unprepare clk32k in twl6040_power() error pathJavier Martinez Canillas
The clk32k clock is prepared and enabled in twl6040_power() but the clock is left enabled in case of an error while it should be disable/unprepared. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl6040: Check clk_prepare_enable() return value in twl6040_power()Javier Martinez Canillas
The clk_prepare_enable() function can fail so check the return value and propagate the error in case of a failure. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: tps6105x: Remove linux/regulator/driver.h includeMark Brown
This driver makes no use of linux/regulator/driver.h which should only be used by drivers implementing a regulator. Since it's unlikely to ever need anything from there remove the include. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel_quark_i2c_gpio: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel-lpss: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel-lpss: Save register context on suspendHeikki Krogerus
All configurations are lost and the registers will have default values when the hardware is suspended and resumed, so saving the private register space context on suspend, and restoring it on resume. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: wm8400-core: Delete wm8400_reg_read()Dan Carpenter
There was a static checker warning in wm8400_reg_read() because we were returning u16 and that can't hold the negative error codes. The function isn't used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: arizona: Update device ordering to allow clean driver removalCharles Keepax
Since this commit: commit b9a8a271c38f ("mfd: make mfd_remove_devices() iterate in reverse order") The order in which the MFD children remove has been reversed, as our driver contains some dependencies between the devices we need to make some changes to ensure the driver unloads cleanly. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: mt6397: IRQ domain should initialize before mfd_add_devices()Henry Chen
Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-29gpio: dwapb: convert device node to fwnodeJiang Qiu
This patch converts device node to fwnode for dwapb driver, so as to provide a unified fwnode for DT and ACPI bindings. Tested-by: Alan Tull <delicious.quinoa@gmail.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jiang Qiu <qiujiang@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-29gpio: dwapb: remove name from dwapb_port_propertyJiang Qiu
This patch removed the name property from dwapb_port_property. The name property is redundant, since we can get this info from dwapb_gpio dev node. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jiang Qiu <qiujiang@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-28mfd: ab8500-debugfs: fix "between" in printkColin Ian King
fix spelling mistake, beetween -> between Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-19mfd: cros_ec: Allow building for ARM64Brian Norris
There are platforms using the ChromeOS embeded controller on ARM64 now, so let's allow using this driver (without having to use COMPILE_TEST). Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: max77686: Use module_i2c_driver() instead of subsys initcallJavier Martinez Canillas
The driver's init and exit function don't do anything besides adding and deleting the I2C driver so the module_i2c_driver() macro could be used. Currently is not being used because the driver is initialized at subsys initcall level, claiming that this is done to allow consumers devices to use the resources provided by this driver. But dependencies are in DT so manual ordering of init calls is not necessary any more. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: max77686/max77693: Fix misspelled Samsung addressKrzysztof Kozlowski
Correct smasung.com into samsung.com. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: vexpress-sysreg: Switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: ucb1x00: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: tps65010: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: tc6393xb: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: sm501: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ben Dooks <ben@fluff.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: htc-i2cpld: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: htc-egpio: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: dm355evm_msp: Switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: asic3: Use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: wm8400: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Mark Brown <broonie@kernel.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: tps65910: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and remove the call of mfd_remove_devices() from .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Tony Lindgren <tony@atomide.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: tps65217: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Tony Lindgren <tony@atomide.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: tps6507x: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. CC: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: stw481x: Use devm_mfd_add_devices() for mfd_device registrationLaxman Dewangan
Use devm_mfd_add_devices() for MFD devices registration and get rid of .remove callback to remove MFD child-devices. This is done by managed device framework. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>