summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-02-21Merge branch 'ib-qcom-ssbi' into develLinus Walleij
2019-02-20dma-mapping: improve selection of dma_declare_coherent availabilityChristoph Hellwig
This API is primarily used through DT entries, but two architectures and two drivers call it directly. So instead of selecting the config symbol for random architectures pull it in implicitly for the actual users. Also rename the Kconfig option to describe the feature better. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18mfd: mxs-lradc: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/mfd/mxs-lradc.c: In function ‘mxs_lradc_probe’: drivers/mfd/mxs-lradc.c:179:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (lradc->soc == IMX28_LRADC) { ^ drivers/mfd/mxs-lradc.c:185:3: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-18mfd: sec-core: Cleanup formatting to a consistent styleKrzysztof Kozlowski
Cleanup the formatting to have consistent style across the file (only white-space issues). No expected difference in code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-18mfd: tqmx86: IO controller with I2C, Wachdog and GPIOAndrew Lunn
The QMX86 is a PLD present on some TQ-Systems ComExpress modules. It provides 1 or 2 I2C bus masters, 8 GPIOs and a watchdog timer. Add an MFD which will instantiate the individual drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-18mfd: intel-lpss: Move linux/pm.h to the local headerAndy Shevchenko
We now using a common macro for PM operations in Intel LPSS driver, and, since that macro relies on the definition and macro from linux/pm.h header file, it's logical to include it directly in intel-lpss.h. Otherwise it's a bit fragile and requires a proper ordering of header inclusion in C files. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-15Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes for 5.1, please pull the following: - Stefan updates the BCM2835 SoC driver with downstream properties and uses that to implement a reboot notifier to tell the VC4 firmware when Linux on the ARM CPU is rebooting - Eric adds a proper power domain driver for the BCM283x SoCs and updates a bunch of drivers to have a better and clearer Device Tree definition to support power domains/breaking up of functionality. This requires converting the existing watchdog driver into a MFD and then breaking up the functionality into separate drivers and finally updating the DTS files to leverage the power domains information. - Wei provides a fix for making a symbol static * tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux: ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware. ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4) soc: bcm: bcm2835-pm: Make local symbol static soc: bcm: Make PM driver default for BCM2835 soc: bcm: bcm2835-pm: Add support for power domains under a new binding. bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD. dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) firmware: raspberrypi: notify VC4 firmware of a reboot soc: bcm2835: sync firmware properties with downstream Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-14mfd: pm8xxx: select IRQ_DOMAIN_HIERARCHY in KconfigBrian Masney
Select IRQ_DOMAIN_HIERARCHY for pm8xxx in Kconfig since this driver uses the version 2 IRQ interfaces. IRQ_DOMAIN_HIERARCHY selects IRQ_DOMAIN, so it can be removed from here. Signed-off-by: Brian Masney <masneyb@onstation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13mfd/sm501: depend on HAS_DMAChristoph Hellwig
Currently the sm501 mfd driver can be compiled without any dependencies, but through the use of dma_declare_coherent it really depends on having DMA and iomem support. Normally we don't explicitly require DMA support as we have stubs for it if on UML, but in this case the driver selects support for dma_declare_coherent and thus also requires memmap support. Guard this by an explicit dependency. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Lee Jones <lee.jones@linaro.org>
2019-02-13mfd: pm8xxx: revert "disassociate old virq if hwirq mapping already exists"Brian Masney
Now that ssbi-gpio is a proper hierarchical IRQ chip, and all in-tree users of device tree have been updated, we can now drop the hack that was introduced to disassociate the old Linux virq if a hwirq mapping already exists. That patch was introduced to not break git bisect for any existing boards. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13mfd: pm8xxx: disassociate old virq if hwirq mapping already existsBrian Masney
Check to see if the hwirq is already associated with another virq on this IRQ domain. If so, then disassociate it before associating the hwirq with the new virq. This is a temporary hack that is needed in order to not break git bisect for existing boards. The next patch in this series converts ssbi-gpio to be a hierarchical IRQ chip, then there are several patches to update all of the device tree files, and finally this patch will be reverted within the same patch series. IRQs for ssbi-gpio are all initially setup without an IRQ hierarchy this driver is probed due to the interrupts property in device tree. Once ssbi-gpio is converted to be a hierarchical IRQ chip in the next patch, existing users of gpio[d]_to_irq() will call pmic_gpio_to_irq(), and that will use the new IRQ chip code in ssbi-gpio that sets up the IRQ in an IRQ hierarchy. The hwirq is now associated with two Linux virqs and interrupts will not work as expected. This patch corrects that issue. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13mfd: pm8xxx: convert to v2 irq interfaces to support hierarchical IRQ chipsBrian Masney
Convert the PM8XXX IRQ code to use the version 2 IRQ interface in order to support hierarchical IRQ chips. This is necessary so that ssbi-gpio can be setup as a hierarchical IRQ chip with PM8xxx as the parent. IRQ chips in device tree should be usable from the start without having to make an additional call to gpio[d]_to_irq() to get the proper IRQ on the parent. pm8821_irq_domain_ops and pm8821_irq_domain_map are removed by this patch since the irq_chip is now contained in the pm_irq_data struct, and that allows us to use a common IRQ mapping function. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-07mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEMGuenter Roeck
While ioctls normally return a negative error or 0 on success, this is not the case for CROS_EC_DEV_IOCXCMD in the cros_ec driver, which returns the number of bytes read instead. However, CROS_EC_DEV_IOCRDMEM in the same driver does not return the number of byte read on success. This is both inconsistent and problematic, since the amount of returned data can be dynamic. Have it return the number of data bytes for consistency. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: tps68470: Drop unused MODULE_DEVICE_TABLEPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_TPS68470 drivers/mfd/Kconfig: bool "TI TPS68470 Power Management / LED chips" ...meaning that it currently is not being built as a module by anyone. Hence we remove the MODULE_DEVICE_TABLE since it is a no-op for non-modular code. There is no removal of <linux/module.h> here because there isn't one. Instead, it is relying on including that implicitly from an ACPI header. In cleaning up the ACPI instance of module.h (which also isn't strictly needed), then this mfd driver breaks when MODULE_DEVICE_TABLE becomes undefined here. The easiest dependency solution is to simply defer the ACPI cleanup until this change is present in mainline. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: at91-usart: No need to copy mfd_cell in probeAxel Lin
Use pointer instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdevAxel Lin
They are never get changed, make them constant. While at it, fix indent as well. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: lochnagar: Add support for the Cirrus Logic LochnagarCharles Keepax
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Audio system topology, clocking and power can all be controlled through the Lochnagar controller chip, allowing the device under test to be used in a variety of possible use cases. As the Lochnagar is a fairly complex device this MFD driver allows the drivers for the various features to be bound in. Initially clocking, regulator and pinctrl will be added as these are necessary to configure the system. But in time at least audio and voltage/current monitoring will also be added. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: sec-core: Return gracefully instead of BUG() if device cannot matchKrzysztof Kozlowski
Replace impossible BUG() in probe with a proper return. This can be triggered only in case of a clear bug (e.g. adding broken half-support for new S2MPSXX flavor) but BUG() is discouraged and the boot process can actually try to continue. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: sm501: Use struct_size() in devm_kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07mfd: sm501: Fix potential NULL pointer dereferenceGustavo A. R. Silva
There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on *lookup* This bug was detected with the help of Coccinelle. Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependenciesJarkko Nikula
INTEL_SOC_PMIC, INTEL_SOC_PMIC_CHTWC and MFD_TPS68470 select the I2C_DESIGNWARE_PLATFORM without its dependencies making it possible to see warning and build error like below: WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y]) Selected by [y]: - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_resume': i2c-designware-platdrv.c:(.text+0x62): undefined reference to `i2c_dw_prepare_clk' /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_suspend': i2c-designware-platdrv.c:(.text+0x9a): undefined reference to `i2c_dw_prepare_clk' /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_probe': i2c-designware-platdrv.c:(.text+0x41c): undefined reference to `i2c_dw_prepare_clk' /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x438): undefined reference to `i2c_dw_read_comp_param' /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x545): undefined reference to `i2c_dw_probe' /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x727): undefined reference to `i2c_dw_probe_slave' Fix this by making above options to depend on I2C_DESIGNWARE_PLATFORM being built-in. I2C_DESIGNWARE_PLATFORM is a visible symbol with dependencies so in general the select should be avoided. Fixes: acebcff9eda8 ("mfd: intel_soc_pmic: Select designware i2c-bus driver") Fixes: de85d79f4aab ("mfd: Add Cherry Trail Whiskey Cove PMIC driver") Fixes: 9bbf6a15ce19 ("mfd: Add support for TPS68470 device") Cc: Stable <stable@vger.kernel.org> # v4.14+ Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: tps65218.c: Add input voltage optionsChristian Hohnstaedt
These options apply to all regulators in this chip. ti,strict-supply-voltage-supervision: Set STRICT flag in CONFIG1 ti,under-voltage-limit-microvolt: Select 2.75, 2.95, 3.25 or 3.35 V UVLO in CONFIG1 ti,under-voltage-hyst-microvolt: Select 200mV or 400mV UVLOHYS in CONFIG2 Signed-off-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm8400-core: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM8400 drivers/mfd/Kconfig: bool "Wolfson Microelectronics WM8400" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. A trivial function rename from wm8400_module_init to the name wm8400_driver_init is also done to reduce possible confusion. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm8350-core: Drop unused module infrastructure from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM8350 drivers/mfd/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We replace module.h with init.h and export.h ; the latter since the file does export some symbols. Previous demodularizaion work has made wm8350_device_exit() no longer used, so it is also removed from the 8350 core code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm8350-i2c: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM8350_I2C drivers/mfd/Kconfig: bool "Wolfson Microelectronics WM8350 with I2C" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. But we do delete an unused moduleparam.h Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm831x-core: Drop unused module infrastructure from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM831X drivers/mfd/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Previous demodularizaion work has made wm831x_device_exit() no longer used, so it is also removed from the 831x core code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm831x-i2c: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM831X_I2C drivers/mfd/Kconfig: bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: wm831x-spi: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_WM831X_SPI drivers/mfd/Kconfig: bool "Wolfson Microelectronics WM831x/2x PMICs with SPI" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: tps80031: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_TPS80031 drivers/mfd/Kconfig: bool "TI TPS80031/TPS80032 Power Management chips" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: tps65910: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_TPS65910 drivers/mfd/Kconfig- bool "TI TPS65910 Power Management chip" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We do delete an unused moduleparam.h include though. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: tps65090: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_TPS65090 drivers/mfd/Kconfig: bool "TI TPS65090 Power Management chips" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: syscon: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_SYSCON drivers/mfd/Kconfig: bool "System Controller Register R/W Based on Regmap" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: sta2x11: Drop unused MODULE_ tags from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_STA2X11 drivers/mfd/Kconfig: bool "STMicroelectronics STA2X11" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We replace module.h with init.h and export.h ; the latter since the file does export some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: rc5t583: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_RC5T583 drivers/mfd/Kconfig: bool "Ricoh RC5T583 Power Management system device" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: max8925-core: Drop unused MODULE_ tags from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX8925 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8925 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: htc-i2cpld: Make it explicitly non-modularPaul Gortmaker
The Kconfig for this option is currently: config HTC_I2CPLD bool "HTC I2C PLD chip support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: db8500-prcmu: Drop unused MODULE_ tags from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_DB8500_PRCMU drivers/mfd/Kconfig: bool "ST-Ericsson DB8500 Power Reset Control Management Unit" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We replace module.h with init.h and export.h ; the latter since the file does export some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: as3711: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_AS3711 drivers/mfd/Kconfig: bool "AMS AS3711" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: adp5520: Make it explicitly non-modularPaul Gortmaker
The Makefile/Kconfig currently controlling compilation of this code is: drivers/mfd/Makefile:obj-$(CONFIG_PMIC_ADP5520) += adp5520.o drivers/mfd/Kconfig:config PMIC_ADP5520 drivers/mfd/Kconfig: bool "Analog Devices ADP5520/01 MFD PMIC Core Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd: aat2870-core: Make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_AAT2870_CORE drivers/mfd/Kconfig: bool "AnalogicTech AAT2870" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and ↵Lee Jones
'ib-mfd-platform-5.1' into ibs-for-mfd-merged
2019-02-01mfd / platform: cros_ec_vbc: Instantiate only if the EC has a VBC NVRAMEnric Balletbo i Serra
The cros-ec-vbc driver is DT-only and there is a DT property that indicates if the EC has the VCB NVRAM, in such case instantiate the driver but don't instantiate on the other cases. To do this move the check code to its parent instead of play with the attribute group visibility. This changes a bit the actual behaviour. Before the patch if an EC doesn't have a VBC NVRAM an empty vbc folder is created in /sys/class/chromeos/<ec-device-name>, after the patch the empty folder is not created, so, the folder is only created if the vbc is set. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd / platform: cros_ec: Move device sysfs attributes to its own driverEnric Balletbo i Serra
The entire way how cros debugfs attibutes are created is broken. cros_ec_sysfs should be its own driver and its attributes should be associated with the sysfs driver not the mfd driver. The patch also adds the sysfs documentation. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd / platform: cros_ec: Move debugfs attributes to its own driverEnric Balletbo i Serra
The entire way how cros debugfs attibutes are created is broken. cros_ec_debugfs should be its own driver and its attributes should be associated with a debugfs driver not the mfd driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd / platform: cros_ec: Move vbc attributes to its own driverEnric Balletbo i Serra
The entire way how cros sysfs attibutes are created is broken. cros_ec_vbc should be its own driver and its attributes should be associated with a vbc driver not the mfd driver. In order to retain the path, the vbc attributes are attached to the cros_class. The patch also adds the sysfs documentation. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01mfd / platform: cros_ec: Move lightbar attributes to its own driverEnric Balletbo i Serra
The entire way how cros sysfs attibutes are created is broken. cros_ec_lightbar should be its own driver and its attributes should be associated with a lightbar driver not the mfd driver. In order to retain the path, the lightbar attributes are attached to the cros_class. The patch also adds the sysfs documentation. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>