summaryrefslogtreecommitdiff
path: root/drivers/misc/lattice-ecp3-config.c
AgeCommit message (Collapse)Author
2022-02-09spi: make remove callback a void functionUwe Kleine-König
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-30misc: lattice-ecp3-config: Fix task hung when firmware load failedWei Yongjun
When firmware load failed, kernel report task hung as follows: INFO: task xrun:5191 blocked for more than 147 seconds. Tainted: G W 5.16.0-rc5-next-20211220+ #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004 Call Trace: __schedule+0xc12/0x4b50 kernel/sched/core.c:4986 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1) schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221 spi_remove+0x72/0xb0 drivers/spi/spi.c:409 lattice_ecp3_remove() wait for signals from firmware loading, but when load failed, firmware_load() does not send this signal. This cause device remove hung. Fix it by sending signal even if load failed. Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13firmware: replace HOTPLUG with UEVENT in FW_ACTION definesShawn Guo
With commit 312c004d36ce ("[PATCH] driver core: replace "hotplug" by "uevent"") already in the tree over a decade, update the name of FW_ACTION defines to follow semantics, and reflect what the defines are really meant for, i.e. whether or not generate user space event. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210425020024.28057-1-shawn.guo@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01misc: lattice-ecp3-config: Remove set but clearly unused variable 'ret'Lee Jones
It's odd for the return value to be assigned to a variable so many times, but never actually checked, but this has been the case since the driver's inception in 2012. If it hasn't caused any issues by now, it's probably unlikely to. Let's take it out, at least until someone finds a reason to start using it. Fixes the following W=1 kernel build warning: drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’: drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 70 | int ret; | ^~~ Cc: Stefan Roese <sr@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-23misc: lattice-ecp3-config: Add missing MODULE_FIRMWARE()Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08Lattice ECP3 FPGA: Check firmware pointerJean-Michel Hautbois
This patch corrects a lack of testing. If fw is NULL when calling firmware_load(), it results in a kernel oops. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27Lattice ECP3 FPGA: Correct endiannessJean-Michel Hautbois
This code corrects endianness and avoids a sparse error. Tested with Lattice ECP3-35 with Freescale i.MX6. It also sends uevent in order to load it. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07drivers/misc: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-28treewide: Fix typo in printkMasanari Iida
Correct spelling typo in various part of drivers Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-05misc: lattice-ecp3-config: use spi_get_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: lattice-ecp3-config.c: remove __dev* markingsGreg Kroah-Hartman
These are now removed from the kernel, so remove them to allow the driver to build properly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: Add Lattice ECP3 FPGA configuration via SPIStefan Roese
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus. Here an example on my custom MPC5200 based board: $ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading leads to these messages: lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured! Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>