summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/vsc-tp.c
AgeCommit message (Collapse)Author
2025-02-19mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIOHans de Goede
The _CRS ACPI resources table has 2 entries for the host wakeup GPIO, the first one being a regular GpioIo () resource while the second one is a GpioInt () resource for the same pin. The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio () resource to "wakeuphost-gpios" where as the second GpioInt () entry is mapped to "wakeuphostint-gpios". Using "wakeuphost" to request the GPIO as was done until now, means that the gpiolib-acpi code does not know that the GPIO is active-low as that info is only available in the GpioInt () entry. Things were still working before due to the following happening: 1. Since the 2 entries point to the same pin they share a struct gpio_desc 2. The SPI core creates the SPI device vsc-tp.c binds to and calls acpi_dev_gpio_irq_get(). This does use the second entry and sets FLAG_ACTIVE_LOW in gpio_desc.flags . 3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the active-low flag set by acpi_dev_gpio_irq_get() But there is a possible scenario where things do not work: 1. - 3. happen as above 4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested next, but its USB GPIO controller is not available yet, so this call returns -EPROBE_DEFER. 5. The gpio_desc for "wakeuphost" is put() and during this the active-low flag is cleared from gpio_desc.flags . 6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it is not marked active-low. The difference can also be seen in /sys/kernel/debug/gpio, which contains the following line for this GPIO: gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW If the second scenario is hit the "ACTIVE LOW" at the end disappears and things do not work. Fix this by requesting the GPIO through the "wakeuphostint" mapping instead which provides active-low info without relying on acpi_dev_gpio_irq_get() pre-populating this info in the gpio_desc. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-10mei: vsc: Do not re-enable interrupt from vsc_tp_reset()Hans de Goede
The only 2 callers of vsc_tp_reset() are: 1. mei_vsc_hw_reset(), which immediataly calls vsc_tp_intr_disable() afterwards. 2. vsc_tp_shutdown() which immediately calls free_irq() afterwards. So neither actually wants the interrupt to be enabled after resetting the chip and having the interrupt enabled for a short time afer the reset is undesirable. Drop the enable_irq() call from vsc_tp_reset(), so that the interrupt is left disabled after vsc_tp_reset(). Link: https://github.com/intel/ivsc-driver/issues/51 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241106220102.40549-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-04mei: vsc: Enhance SPI transfer of IVSC ROMWentong Wu
Before downloading firmware, a command response is required to identify the silicon. However, when downloading IVSC firmware, reading data from the SPI transfers with the IVSC ROM is not necessary. Therefore, the rx buffer of SPI transfer command is determined based on the specific request of the caller. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Acked-by: Tomas Winker <tomas.winker@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20240625081047.4178494-5-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-04mei: vsc: Utilize the appropriate byte order swap functionWentong Wu
Switch from cpu_to_be32_array() to be32_to_cpu_array() for the received ROM data. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable@vger.kernel.org # for 6.8+ Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20240625081047.4178494-4-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-04mei: vsc: Enhance IVSC chipset stability during warm rebootWentong Wu
During system shutdown, incorporate reset logic to ensure the IVSC chipset remains in a valid state. This adjustment guarantees that the IVSC chipset operates in a known state following a warm reboot. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable@vger.kernel.org # for 6.8+ Signed-off-by: Wentong Wu <wentong.wu@intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20240625081047.4178494-2-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11mei: vsc: Unregister interrupt handler for system suspendSakari Ailus
Unregister the MEI VSC interrupt handler before system suspend and re-register it at system resume time. This mirrors implementation of other MEI devices. This patch fixes the bug that causes continuous stream of MEI VSC errors after system resume. Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Cc: stable@vger.kernel.org # for 6.8 Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240403051341.3534650-2-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"Sakari Ailus
This reverts commit 058a38acba15fd8e7b262ec6e17c4204cb15f984. It's not necessary to avoid a spinlock, a sleeping lock on PREEMPT_RT, in an interrupt handler as the interrupt handler itself would be called in a process context if PREEMPT_RT is enabled. So revert the patch. Cc: stable@vger.kernel.org # for 6.8 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240403051341.3534650-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-21Merge tag 'char-misc-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...
2024-03-05mei: vsc: Assign pinfo fields in variable declarationSakari Ailus
Assign all possible fields of pinfo in variable declaration, instead of just zeroing it there. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com> Link: https://lore.kernel.org/r/20240219195807.517742-4-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05mei: vsc: Don't use sleeping condition in wait_event_timeout()Sakari Ailus
vsc_tp_wakeup_request() called wait_event_timeout() with gpiod_get_value_cansleep() which may sleep, and does so as the implementation is that of gpio-ljca. Move the GPIO state check outside the call. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com> Link: https://lore.kernel.org/r/20240219195807.517742-3-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05mei: vsc: Call wake_up() in the threaded IRQ handlerSakari Ailus
The hard IRQ handler vsc_tp_irq() is called with a raw spinlock taken. wake_up() acquires a spinlock, a sleeping lock on PREEMPT_RT. This leads to sleeping in atomic context. Move the wake_up() call to the threaded IRQ handler vsc_tp_thread_isr() where it can be safely called. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com> Link: https://lore.kernel.org/r/20240219195807.517742-2-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19mei: Add Meteor Lake support for IVSC deviceWentong Wu
Add IVSC device support on Meteor Lake platform. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Cc: stable <stable@kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240207004304.31862-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-07mei: Add transport driver for IVSC deviceWentong Wu
The Intel visual sensing controller (IVSC) device is designed to control the camera sharing between host IPU for media usage and IVSC for context sensing (face detection). IVSC is exposed to HOST as an SPI device and the message protocol over the SPI BUS for communicating with the IVSC device is implemented. This is the backend of mei framework for IVSC device, which usually handles the hardware data transfer. The mei_csi and mei_ace are the clients of IVSC mei framework. The firmware downloading for the IVSC device is implemented as well. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hao Yao <hao.yao@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/1701651344-20723-2-git-send-email-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>