Age | Commit message (Expand) | Author |
2013-05-26 | mmc: core: Add bus_ops for runtime pm callbacks | Ulf Hansson |
2013-05-26 | mmc: core: Only execute tuning for SDR50 and SDR104 | Fredrik Soderstedt |
2013-04-12 | mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case | Li Fei |
2013-02-24 | mmc: core: Fixup signal voltage switch | Johan Rudholm |
2013-02-24 | mmc: core: Break out start_signal_voltage_switch | Johan Rudholm |
2013-02-11 | mmc: sdio: print correct UHS mode during card detection | Subhash Jadavani |
2013-02-11 | mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence | Sujit Reddy Thumma |
2013-02-11 | mmc: sdio: fix resume failure due to lack of CMD52 reset | Subhash Jadavani |
2012-09-01 | mmc: fix comment typos | Masanari Iida |
2012-07-22 | mmc: core: reset signal voltage on power up | Aaron Lu |
2012-06-06 | mmc: sdio: fix setting card data bus width as 4-bit | Yong Ding |
2012-04-22 | mmc: sdio: avoid spurious calls to interrupt handlers | Nicolas Pitre |
2012-03-04 | mmc: core: Fixup suspend/resume issues for UHS-I cards | Ulf Hansson |
2012-02-13 | mmc: core: UHS sdio card that fails should not exceed 50MHz | Philip Rakity |
2012-01-12 | mmc: core: HS200 mode support for eMMC 4.5 | Girish K S |
2012-01-11 | mmc: allow upper layers to know immediately if card has been removed | Adrian Hunter |
2012-01-11 | mmc: sdio: support SDIO UHS cards | Philip Rakity |
2011-10-26 | mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00 | Bing Zhao |
2011-10-26 | mmc: replace printk with appropriate display macro | Girish K S |
2011-10-26 | mmc: core: Set correct bus mode before card init | Stefan Nilsson XK |
2011-10-26 | mmc: core: Fix hangs related to insert/remove of cards | Ulf Hansson |
2011-06-25 | mmc: sdio: reset card during power_restore | Daniel Drake |
2011-05-24 | mmc: sd: add support for driver type selection | Arindam Nath |
2011-05-24 | mmc: quirks: Extends card quirks with MMC/SD quirks matching the CID. | Andrei Warkentin |
2011-05-24 | mmc: add MMC_QUIRK_DISABLE_CD | Ohad Ben-Cohen |
2011-05-24 | mmc: add MMC_QUIRK_NONSTD_FUNC_IF | Ohad Ben-Cohen |
2011-05-24 | mmc: do not switch to 1-bit mode if not required | Ohad Ben-Cohen |
2011-05-24 | mmc: mmc_card_keep_power cleanups | Ohad Ben-Cohen |
2011-03-17 | mmc: sdio: remember new card RCA when redetecting card | Stefan Nilsson XK |
2011-03-15 | mmc: add per device quirk placeholder | Pierre Tardy |
2011-03-07 | mmc: sdio: Allow sdio operations in other threads during sdio_add_func() | Dmitry Shmidt |
2011-01-08 | mmc: Fix sd/sdio/mmc initialization frequency retries | Andy Ross |
2011-01-08 | mmc: sdio: don't reinitialize nonremovable powered-resumed cards | Ohad Ben-Cohen |
2011-01-08 | mmc: Add support for JMicron 388 SD/MMC controller | Takashi Iwai |
2010-11-19 | mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD | Ohad Ben-Cohen |
2010-11-19 | mmc: sdio: fix nasty oops in mmc_sdio_detect | Ohad Ben-Cohen |
2010-10-23 | mmc: sdio: ensure mmc_sdio_detect is powered | Ohad Ben-Cohen |
2010-10-23 | mmc: sdio: enable runtime PM for SDIO functions | Ohad Ben-Cohen |
2010-10-23 | mmc: sdio: enable runtime PM for SDIO cards | Ohad Ben-Cohen |
2010-10-23 | mmc: sdio: add power_restore support | Ohad Ben-Cohen |
2010-10-23 | mmc: sdio: fully reconfigure oldcard on resume | Ohad Ben-Cohen |
2010-09-09 | mmc: avoid getting CID on SDIO-only cards | David Vrabel |
2010-08-11 | sdio: allow non-standard SDIO cards | Grazvydas Ignotas |
2010-08-11 | mmc: implement SD-combo (IO+mem) support | Michal Miroslaw |
2010-08-11 | mmc: split mmc_sd_init_card() | Michal Miroslaw |
2010-04-14 | ARM: MXC: mxcmmc: work around a bug in the SDHC busy line handling | Daniel Mack |
2010-03-06 | sdio: put active devices into 1-bit mode during suspend | Daniel Drake |
2010-03-06 | sdio: kick the interrupt thread upon a resume | Nicolas Pitre |
2010-03-06 | sdio: don't use CMD[357] as part of a powered SDIO resume | Chris Ball |
2009-12-17 | sdio: initialise SDIO functions and update card->sdio_funcs in lockstep | Matt Fleming |