summaryrefslogtreecommitdiff
path: root/drivers/mmc/core
AgeCommit message (Collapse)Author
2017-09-08mmc: block: Fix incorrectly initialized requestsAdrian Hunter
mmc_init_request() depends on card->bouncesz so it must be calculated before blk_init_allocated_queue() starts allocating requests. Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the..") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2017-08-30Merge branch 'fixes' into nextUlf Hansson
2017-08-30mmc: core: Move mmc_start_areq() declarationAdrian Hunter
mmc_start_areq() is an internal mmc core API. Move the declaration accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: cast a informative log for no devidx availableShawn Lin
The intention for this patch is to help folks debug the failure like this: dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. dwmmc_rockchip fe320000.dwmmc: Version ID is 270a dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo dwmmc_rockchip fe320000.dwmmc: Got CD GPIO mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) mmc0: new high speed SDHC card at address 0007 mmcblk: probe of mmc0:0007 failed with error -28 The reason may be some buggy userspace daemon miss the disk remove uevent sometimes so it would finally make the SD card not work. So from the dmesg it only shows a errno of -28 but still don't understand what happened. For quick reproduce this, we could set max_devices to 8 and run for i in $(seq 1 9); do echo "========================" $i echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/unbind sleep .5 echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/bind sleep .5 mount -t vfat /dev/mmcblk0 /mnt sleep .5 done Another possible reason would be the device has more partitions than what we support, so that they have to increase their max_devices. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Reparametrize mmc_blk_ioctl_[multi]_cmd()Linus Walleij
Instead of passing a block device to mmc_blk_ioctl[_multi]_cmd(), let's pass struct mmc_blk_data() so we operate ioctl()s on the MMC block device representation rather than the vanilla block device. This saves a little duplicated code and makes it possible to issue ioctl()s not targeted for a specific block device but rather for a specific partition/area. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Refactor mmc_blk_part_switch()Linus Walleij
Instead of passing a struct mmc_blk_data * to mmc_blk_part_switch() let's pass the actual partition type we want to switch to. This is necessary in order not to have a block device with a backing mmc_blk_data and request queue and all for every hardware partition, such as RPMB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Move duplicate checkLinus Walleij
mmc_blk_ioctl() calls either mmc_blk_ioctl_cmd() or mmc_blk_ioctl_multi_cmd() and each of these make the same check. Factor it into a new helper function, call it on both branches of the switch() statement and save a chunk of duplicate code. Cc: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: debugfs: Move block debugfs into block moduleLinus Walleij
If we don't have the block layer enabled, we do not present card status and extcsd in the debugfs. Debugfs is not ABI, and maintaining files of no relevance for non-block devices comes at a high maintenance cost if we shall support it with the block layer compiled out. The debugfs entries suffer from all the same starvation issues as the other userspace things, under e.g. a heavy dd operation. The expected number of debugfs users utilizing these two debugfs files is already low as there is an ioctl() to get the same information using the mmc-tools, and of these few users the expected number of people using it on SDIO or combo cards are expected to be zero. It is therefore logical to move this over to the block layer when it is enabled, using the new custom requests and issue it using the block request queue. On the other hand it moves some debugfs code from debugfs.c and into block.c. Tested during heavy dd load by cat:in the status file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: ops: export mmc_get_status()Linus Walleij
This function retrieves the status of the card with the default number of retries. Since the block layer wants to use this, and since the block layer is a loadable kernel module, we need to export this symbol. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Anonymize the drv op data pointerLinus Walleij
We have a data pointer for the ioctl() data, but we need to pass other data along with the DRV_OP:s, so make this a void * so it can be reused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: test: reduce stack usage in mmc_test_nonblock_transferArnd Bergmann
The new lockdep annotations for completions cause a warning in the mmc test module, in a function that now has four 150 byte structures on the stack: drivers/mmc/core/mmc_test.c: In function 'mmc_test_nonblock_transfer.constprop': drivers/mmc/core/mmc_test.c:892:1: error: the frame size of 1360 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The mmc_test_ongoing_transfer function evidently had a similar problem, and worked around it by using dynamic allocation. This generalizes the approach used by mmc_test_ongoing_transfer() and applies it to mmc_test_nonblock_transfer() as well. Fixes: cd8084f91c02 ("locking/lockdep: Apply crossrelease to completions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Turn off CQE before sending commandsAdrian Hunter
CQE needs to be off for the host controller to accept non-CQ commands. Turn off the CQE before sending commands, and ensure it is off in any reset or power management paths, or re-tuning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Add mmc_retune_hold_now()Adrian Hunter
mmc_return_hold() / mmc_retune_release() are used around a group of commands to prevent re-tuning between the commands. Re-tuning can still happen before the first command. In some cases, re-tuning must be prevented entirely. Add mmc_retune_hold_now() for that purpose. It is added in preparation for CQE support where it will be used by CQE recovery. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Remove unused MMC_CAP2_PACKED_CMDAdrian Hunter
Packed commands support was removed but some bits got left behind. Remove them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: remove the check of mmc_card_blockaddr for SD cardsShawn Lin
Per the SD physical layer simplified specification V4.10, section 4.6.2, CSD version 1.0 SD card should use taac, nsac and r2w_factor for calculating the data access time. But the taac and nsac for SDHC(CSD version 2.0) are always fixed and the software should use the recommended value for timeout. When parsing the CSD, we sanely set them to zero for SDHC(CSD version 2.0), all the calculation for timeout_ns and timeout_clk is zero as well. So what we actually want to limit here is either SDHC case or unreasonable timeout reported by the cards. In principle we should at least be able to remove the bogus check for the mmc_card_blockaddr. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: correct taac parameter according to the specificationShawn Lin
Per the spec of JESD84-B51, section 7.3, replace tacc with taac to fix the obvious typo. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Jan Glauber <jglauber@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: linux-mmc@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Tested-by: Steven J. Hill <Steven.Hill@cavium.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: turn the pr_info under CONFIG_MMC_DEBUG into pr_debugShawn Lin
There are lots of debug message in core.c which use pr_debug for better dynamic log level control. So it doesn't make sense for those print to still keep working only under CONFIG_MMC_DEBUG. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: always check the length of sglist with total data sizeShawn Lin
All the check within mmc_mrq_prep seems to be all-or-none proposition, so it doesn't make sense to only check the length of sglist only under the CONFIG_MMC_DEBUG context. I'd prefer to always keep the check there unconditionally. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: remove check of host->removed for rescan routineShawn Lin
The intention of this check was to prevent the conflict between hotplug and removing driver for whatever reason. Currently it doesn't improve anything and the following rescan process could still saftly perform the scan flow. So these code seems pointless now and let's remove them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: remove unused struct mmc_card *cardShawn Lin
It was never used and introduced a long standing compile warning: drivers/mmc/core/block.c: In function 'power_ro_lock_store': drivers/mmc/core/block.c:191:19: warning: variable 'card' set but not used [-Wunused-but-set-variable] Remove it to fix the warning. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mmc_ops: fix a typo for comment of mmc_start_bkopsShawn Lin
Just a trivial fix for that found by reading the code. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Fix block status codesAdrian Hunter
Commit 2a842acab109 ("block: introduce new block status code type") changed the error type but not in patches merged through the mmc tree, like commit 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver op"). Fix one error code that is incorrect and also use BLK_STS_OK in preference to 0. Fixes: 17ece345a042 ("Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-21mmc: block: prevent propagating R1_OUT_OF_RANGE for open-ending modeShawn Lin
We to some extent should tolerate R1_OUT_OF_RANGE for open-ending mode as it is expected behaviour and most of the backup partition tables should be located near some of the last blocks which will always make open-ending read exceed the capacity of cards. Fixes: 9820a5b11101 ("mmc: core: for data errors, take response of stop cmd into account") Fixes: a04e6bae9e6f ("mmc: core: check also R1 response for stop commands") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-09mmc: block: fix lockdep splat when removing mmc_block moduleMichał Mirosław
Fix lockdep splat introduced in v4.13-rc4. [ 266.297226] ------------[ cut here ]------------ [ 266.300078] WARNING: CPU: 2 PID: 176 at /mnt/src/jaja/git/tf300t/include/linux/blkdev.h:657 mmc_blk_remove_req+0xd0/0xe8 [mmc_block] [ 266.302937] Modules linked in: mmc_block(-) sdhci_tegra sdhci_pltfm sdhci pwrseq_simple pwrseq_emmc mmc_core [ 266.305941] CPU: 2 PID: 176 Comm: rmmod Tainted: G W 4.13.0-rc4mq-00208-gb691e67724b8-dirty #694 [ 266.308852] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 266.311719] [<b011144c>] (unwind_backtrace) from [<b010ca54>] (show_stack+0x18/0x1c) [ 266.314664] [<b010ca54>] (show_stack) from [<b062e3f4>] (dump_stack+0x84/0x98) [ 266.317644] [<b062e3f4>] (dump_stack) from [<b01214f4>] (__warn+0xf4/0x10c) [ 266.320542] [<b01214f4>] (__warn) from [<b01215d4>] (warn_slowpath_null+0x28/0x30) [ 266.323534] [<b01215d4>] (warn_slowpath_null) from [<af067858>] (mmc_blk_remove_req+0xd0/0xe8 [mmc_block]) [ 266.326568] [<af067858>] (mmc_blk_remove_req [mmc_block]) from [<af068f40>] (mmc_blk_remove_parts.constprop.6+0x50/0x64 [mmc_block]) [ 266.329678] [<af068f40>] (mmc_blk_remove_parts.constprop.6 [mmc_block]) from [<af0693b8>] (mmc_blk_remove+0x24/0x140 [mmc_block]) [ 266.332894] [<af0693b8>] (mmc_blk_remove [mmc_block]) from [<af0052ec>] (mmc_bus_remove+0x20/0x28 [mmc_core]) [ 266.336198] [<af0052ec>] (mmc_bus_remove [mmc_core]) from [<b046aa64>] (device_release_driver_internal+0x164/0x200) [ 266.339367] [<b046aa64>] (device_release_driver_internal) from [<b046ab54>] (driver_detach+0x40/0x74) [ 266.342537] [<b046ab54>] (driver_detach) from [<b046982c>] (bus_remove_driver+0x68/0xdc) [ 266.345660] [<b046982c>] (bus_remove_driver) from [<af06ad40>] (mmc_blk_exit+0xc/0x2cc [mmc_block]) [ 266.348875] [<af06ad40>] (mmc_blk_exit [mmc_block]) from [<b01aee30>] (SyS_delete_module+0x1c4/0x254) [ 266.352068] [<b01aee30>] (SyS_delete_module) from [<b0108480>] (ret_fast_syscall+0x0/0x34) [ 266.355308] ---[ end trace f68728a0d3053b72 ]--- Fixes: 7c84b8b43d3d ("mmc: block: bypass the queue even if usage is present for hotplug") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-08mmc: mmc: correct the logic for setting HS400ES signal voltageHaibo Chen
Change the default err value to -EINVAL, make sure the card only has type EXT_CSD_CARD_TYPE_HS400_1_8V also do the signal voltage setting when select hs400es mode. Fixes: commit 1720d3545b77 ("mmc: core: switch to 1V8 or 1V2 for hs400es mode") Cc: <stable@vger.kernel.org> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-03mmc: block: bypass the queue even if usage is present for hotplugShawn Lin
The commit 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core") refactored mechanism of queue handling caused mmc_init_request() can be called just after mmc_cleanup_queue() caused null pointer dereference. Another commit bbdc74dc19e0 ("mmc: block: Prevent new req entering queue after its cleanup") tried to fix the problem. However it actually miss one corner case. We could still reproduce the issue mentioned with these steps: (1) insert a SD card and mount it (2) hotplug it, so it will leave md->usage still be counted (3) reboot the system which will sync data and umount the card [Unable to handle kernel NULL pointer dereference at virtual address 00000000 [user pgtable: 4k pages, 48-bit VAs, pgd = ffff80007bab3000 [[0000000000000000] *pgd=000000007a828003, *pud=0000000078dce003, *pmd=000000007aab6003, *pte=0000000000000000 [Internal error: Oops: 96000007 [#1] PREEMPT SMP [Modules linked in: [CPU: 3 PID: 3507 Comm: umount Tainted: G W 4.13.0-rc1-next-20170720-00012-g9d9bf45 #33 [Hardware name: Firefly-RK3399 Board (DT) [task: ffff80007a1de200 task.stack: ffff80007a01c000 [PC is at mmc_init_request+0x14/0xc4 [LR is at alloc_request_size+0x4c/0x74 [pc : [<ffff0000087d7150>] lr : [<ffff000008378fe0>] pstate: 600001c5 [sp : ffff80007a01f8f0 .... [[<ffff0000087d7150>] mmc_init_request+0x14/0xc4 [[<ffff000008378fe0>] alloc_request_size+0x4c/0x74 [[<ffff00000817ac28>] mempool_create_node+0xb8/0x17c [[<ffff00000837aadc>] blk_init_rl+0x9c/0x120 [[<ffff000008396580>] blkg_alloc+0x110/0x234 [[<ffff000008396ac8>] blkg_create+0x424/0x468 [[<ffff00000839877c>] blkg_lookup_create+0xd8/0x14c [[<ffff0000083796bc>] generic_make_request_checks+0x368/0x3b0 [[<ffff00000837b050>] generic_make_request+0x1c/0x240 So mmc_blk_put wouldn't calling blk_cleanup_queue which actually the QUEUE_FLAG_DYING and QUEUE_FLAG_BYPASS should stay. Block core expect blk_queue_bypass_{start, end} internally to bypass/drain the queue before actually dying the queue, so it didn't expose API to set the queue bypass. I think we should set QUEUE_FLAG_BYPASS whenever queue is removed, although the md->usage is still counted, as no dispatch queue could be found then. Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-13mmc: block: Prevent new req entering queue after its cleanupGrzegorz Sluja
The commit 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core"), refactored the mechanism of queue handling, but also made mmc_init_request() to be called after mmc_cleanup_queue(). This triggers a null pointer dereference: [ 683.123791] BUG: unable to handle kernel NULL pointer dereference at (null) [ 683.123801] IP: mmc_init_request+0x2c/0xf0 [mmc_block] ... [ 683.123905] Call Trace: [ 683.123913] alloc_request_size+0x4f/0x70 [ 683.123919] mempool_alloc+0x5f/0x150 [ 683.123925] ? __enqueue_entity+0x6c/0x70 [ 683.123928] get_request+0x3ad/0x720 [ 683.123933] ? prepare_to_wait_event+0x110/0x110 [ 683.123937] blk_queue_bio+0xc1/0x3a0 [ 683.123940] generic_make_request+0xf8/0x2a0 [ 683.123942] submit_bio+0x75/0x150 [ 683.123947] submit_bio_wait+0x51/0x70 [ 683.123951] blkdev_issue_flush+0x5c/0x90 [ 683.123956] ext4_sync_fs+0x171/0x1b0 [ 683.123961] sync_filesystem+0x73/0x90 [ 683.123965] fsync_bdev+0x24/0x50 [ 683.123971] invalidate_partition+0x24/0x50 [ 683.123973] del_gendisk+0xb2/0x2a0 [ 683.123977] mmc_blk_remove_req.part.38+0x71/0xa0 [mmc_block] [ 683.123980] mmc_blk_remove+0xba/0x190 [mmc_block] [ 683.123990] mmc_bus_remove+0x1a/0x20 [mmc_core] [ 683.123995] device_release_driver_internal+0x141/0x200 [ 683.123999] device_release_driver+0x12/0x20 [ 683.124001] bus_remove_device+0xfd/0x170 [ 683.124004] device_del+0x1e8/0x330 [ 683.124012] mmc_remove_card+0x60/0xc0 [mmc_core] [ 683.124019] mmc_remove+0x19/0x30 [mmc_core] [ 683.124025] mmc_stop_host+0xfb/0x1a0 [mmc_core] [ 683.124032] mmc_remove_host+0x1a/0x40 [mmc_core] [ 683.124037] sdhci_remove_host+0x2e/0x1c0 [mmc_sdhci] [ 683.124042] sdhci_pci_remove_slot+0x3f/0x80 [sdhci_pci] [ 683.124045] sdhci_pci_remove+0x39/0x70 [sdhci_pci] [ 683.124049] pci_device_remove+0x39/0xc0 [ 683.124052] device_release_driver_internal+0x141/0x200 [ 683.124056] driver_detach+0x3f/0x80 [ 683.124059] bus_remove_driver+0x55/0xd0 [ 683.124062] driver_unregister+0x2c/0x50 [ 683.124065] pci_unregister_driver+0x29/0x90 [ 683.124069] sdhci_driver_exit+0x10/0x4f3 [sdhci_pci] [ 683.124073] SyS_delete_module+0x171/0x250 [ 683.124078] entry_SYSCALL_64_fastpath+0x1e/0xa9 Fix this by setting the queue DYING flag before cleanup the queue, as it prevents new reqs from entering the queue. Signed-off-by: Grzegorz Sluja <grzegorzx.sluja@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the...") [Ulf: Updated the changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-11mmc: block: Let MMC_IOC_MULTI_CMD return zero again for zero entriesGeert Uytterhoeven
With gcc 4.1.2: drivers/mmc/core/block.c: In function ‘mmc_blk_ioctl_cmd_issue’: drivers/mmc/core/block.c:630: warning: ‘ioc_err’ may be used uninitialized in this function Indeed, if mq_rq->ioc_count is zero, an uninitialized value will be stored in mq_rq->drv_op_result and passed to blk_end_request_all(). Can mq_rq->ioc_count be zero? - mmc_blk_ioctl_cmd() sets ioc_count to 1, so this is safe, - mmc_blk_ioctl_multi_cmd() obtains ioc_count from user space in response to the MMC_IOC_MULTI_CMD ioctl, and does allow zero. To avoid returning an uninitialized value, and as it is pointless to do all this work when the MMC_IOC_MULTI_CMD ioctl is used with zero entries, check for this early in mmc_blk_ioctl_multi_cmd(), and return zero, like was returned before. Fixes: 3ecd8cf23f88d5df ("mmc: block: move multi-ioctl() to use block layer") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-11mmc: block: Initialize ret in mmc_blk_issue_drv_op() for MMC_DRV_OP_IOCTLGeert Uytterhoeven
With gcc 4.1.2: drivers/mmc/core/block.c: In function ‘mmc_blk_issue_drv_op’: drivers/mmc/core/block.c:1178: warning: ‘ret’ may be used uninitialized in this function Indeed, for MMC_DRV_OP_IOCTL, if mq_rq->ioc_count is zero, an uninitialized value will be stored in mq_rq->drv_op_result and passed to blk_end_request_all(). Can mq_rq->ioc_count be zero? - mmc_blk_ioctl_cmd() sets ioc_count to 1, so this is safe, - mmc_blk_ioctl_multi_cmd() obtains ioc_count from user space in response to the MMC_IOC_MULTI_CMD ioctl, and does allow zero. Initialize ret to zero to fix this for current and future callers. Fixes: 0493f6fe5bdee8ac ("mmc: block: Move boot partition locking into a driver op") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-04Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support to enable irq wake for slot gpio - Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour - Improve R1 response error checks for stop commands - Cleanup and clarify some MMC specific code - Keep card runtime resumed while adding SDIO function devices - Use device_property_read instead of of_property_read in mmc_of_parse() - Move boot partition locking into a driver op to enable proper I/O scheduling - Move multi/single-ioctl() to use block layer to enable proper I/O scheduling - Delete bounce buffer Kconfig option - Improve the eMMC HW reset support provided via the eMMC pwrseq - Add host API to manage SDIO IRQs from a workqueue MMC host: - dw_mmc: Drop support for multiple slots - dw_mmc: Use device_property_read instead of of_property_read - dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time - dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards - dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs - omap_hsmmc: Convert to mmc regulator APIs to consolidate code - omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead - tmio: make sure SDIO gets reinitialized after resume - sdhi: add CMD23 support to R-Car Gen2 & Gen3 - tmio: add CMD23 support - sdhi/tmio: Refactor code and rename files to simplify Kconfig options - sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers - sdhci-pci: Add support for Intel CNP - sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers - sdhci-esdhc-imx: Allow all supported prescaler values - sdhci-esdhc-imx: Fix DAT line software reset - sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR - atmel-mci: Drop AVR32 support" * tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: dw_mmc: remove the unnecessary slot variable mmc: dw_mmc: use the 'slot' instead of 'cur_slot' mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot mmc: dw_mmc: change the array of slots mmc: dw_mmc: remove the loop about finding slots mmc: dw_mmc: deprecated the "num-slots" property mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases mmc: renesas-sdhi: improve checkpatch cleanness mmc: tmio: improve checkpatch cleanness mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers mmc: slot-gpio: Add support to enable irq wake on cd_irq mmc: core: Remove MMC_CAP2_HC_ERASE_SZ mmc: core: for data errors, take response of stop cmd into account mmc: core: check also R1 response for stop commands mmc: core: Clarify code for sending CSD mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead mmc: core: Re-factor code for sending CID mmc: core: Remove redundant code in mmc_send_cid() mmc: core: Make mmc_can_reset() static ...
2017-06-27mmc/block: remove a call to blk_queue_bounce_limitChristoph Hellwig
BLK_BOUNCE_ANY is the defauly now, so the call is superflous. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20mmc: slot-gpio: Add support to enable irq wake on cd_irqAdrian Hunter
Add host capability MMC_CAP_CD_WAKE to enable irq wake on the card detect irq. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Remove MMC_CAP2_HC_ERASE_SZUlf Hansson
The MMC_CAP2_HC_ERASE_SZ is used only by a few mmc host drivers. Its intent is to enable eMMC's high-capacity erase size, as to improve the behaviour of the erase operations. We should strive to avoid software configuration options that aren't necessary, but instead deploy common behaviours. For these reasons, let's remove the capability bit for MMC_CAP2_HC_ERASE_SZ and make it the default behaviour. Note that this change doesn't affect eMMCs supporting trim/discard, because these commands operates on sectors and takes precedence over erase commands. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: for data errors, take response of stop cmd into accountWolfram Sang
Some errors are flagged only with the next command after a multiblock transfer, e.g. ECC error. So, when checking for data transfer errors, we check the result from the stop command as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: check also R1 response for stop commandsWolfram Sang
To detect errors like ECC errors, we must parse the R1 response bits. Introduce a helper function to also set the error value of a command when R1 error bits are set. Add ECC error to list of flags checked. Use the new helper for the stop command to call mmc_blk_recovery when detecting ECC errors which are only flagged on the next command after multiblock. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Clarify code for sending CSDUlf Hansson
To make the code more consistent and to increase readability, add an mmc_spi_send_csd() function, which gets called from mmc_send_csd() in case of SPI mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() insteadUlf Hansson
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Re-factor code for sending CIDUlf Hansson
Instead of having the caller to check for SPI mode, let's leave that to internals of mmc_send_cid(). In this way the code gets cleaner and it becomes clear what is specific to SPI and non-SPI mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Remove redundant code in mmc_send_cid()Ulf Hansson
The mmc_send_cid() is never called using non SPI mode. Thus, let's remove the redundant code dealing with this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Make mmc_can_reset() staticUlf Hansson
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc_flush_cache() from core.c to mmc_ops.cUlf Hansson
The mmc_flush_cache() is a eMMC specific function, let's move it to mmc_ops.c to make that clear. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc_interrupt_hpi() from core.c to mmc_ops.cUlf Hansson
The mmc_interrupt_hpi() is a eMMC specific function, let's move it to mmc_ops.c to make that clear. The move also enables us to make mmc_send_hpi_cmd() static, so let's do that change as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Move mmc bkops functions from core.c to mmc_ops.cUlf Hansson
The mmc_start_bkops(), mmc_stop_bkops() and mmc_read_bkops_status() functions are all specific to eMMCs. To make this clear, let's move them from from core.c to mmc_ops.c and take the opportunity to make mmc_read_bkops_status() static. While moving them, get rid of MMC_BKOPS_MAX_TIMEOUT (4 min) and use the common default timeout MMC_OPS_TIMEOUT_MS (10 min) instead, as there is no need to have specific default timeout for bkops. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: core: Don't export some eMMC specific functions from core.cUlf Hansson
The mmc_start|stop_bkops(), mmc_read_bkops_status() and mmc_interrupt_hpi() functions are all used from within the mmc core module, thus there are no need to use EXPORT_SYMBOL() for them, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-06-20mmc: sdio: Keep card runtime resumed while adding function devicesAdrian Hunter
Drivers core will runtime suspend a device with no driver. That means the SDIO card will be runtime suspended as soon as it is added. It is then runtime resumed to add each function. That is entirely pointless, so add pm runtime get/put to keep the SDIO card runtime resumed until the function devices have been added. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: sdio: Tidy error path in mmc_attach_sdio()Adrian Hunter
The error path deletes the device by calling mmc_sdio_remove() which must be called without the host claimed. Simplify the error path so it does just that and add a comment about why we don't disable runtime PM. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: core: Use device_property_read instead of of_property_readDavid Woods
Using the device_property interfaces allows mmc drivers to work on platforms which run on either device tree or ACPI. Signed-off-by: David Woods <dwoods@mellanox.com> Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: stable@vger.linux.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: fix semicolon.cocci warningsWu Fengguang
drivers/mmc/core/block.c:1929:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: block: Use __mmc_send_status() and drop get_card_status()Ulf Hansson
The only reason to why the mmc block device driver needs to implements its own version of how to get the status of the card, is that it needs to specify a different amount of retries. Therefore add a new exported function which allows the caller to specify the number of retries and convert everybody to use it, as this simplifies the code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-12 09:16:46 +0000