summaryrefslogtreecommitdiff
path: root/drivers/mmc/core
AgeCommit message (Collapse)Author
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-13Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Introduce host claiming by context to support blkmq - Preparations for enabling CQE (eMMC CMDQ) requests - Re-factorizations to prepare for blkmq support - Re-factorizations to prepare for CQE support - Fix signal voltage switch for SD cards without power cycle - Convert RPMB to a character device - Export eMMC revision via sysfs - Support eMMC DT binding for fixed driver type - Document mmc_regulator_get_supply() API MMC host: - omap_hsmmc: Updated regulator management for PBIAS - sdhci-omap: Add new OMAP SDHCI driver - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs - sdhci-pci: Add support for Intel CDF - sdhci-acpi: Fix voltage switch for some Intel host controllers - sdhci-msm: Enable delay circuit calibration clocks - sdhci-msm: Manage power IRQ properly - mediatek: Add support of mt2701/mt2712 - mediatek: Updates management of clocks and tunings - mediatek: Upgrade eMMC HS400 support - rtsx_pci: Update tuning for gen3 PCI-Express - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings - Catch all errors when getting regulators - Various additional improvements and cleanups" * tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits) sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute dt-bindings: sdhci-fujitsu: document cmd-dat-delay property mmc: tmio: Replace msleep() of 20ms or less with usleep_range() mmc: dw_mmc: Convert timers to use timer_setup() mmc: dw_mmc: Cleanup the DTO timer like the CTO one mmc: vub300: Use common code in __download_offload_pseudocode() mmc: tmio: Use common error handling code in tmio_mmc_host_probe() mmc: Convert timers to use timer_setup() mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers mmc: sdhci-acpi: Let devices define their own private data mmc: mediatek: perfer to use rise edge latching for cmd line mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: add latch-ck support mmc: mediatek: add support of source_cg clock mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add busy_check support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add pad_tune0 support mmc: mediatek: make hs400_tune_response only for mt8173 arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30mmc: parse new binding for eMMC fixed driver typeWolfram Sang
Parse the new binding and store it in the host struct after doing some sanity checks. The code is designed to support fixed SD driver type if we ever need that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: add kerneldoc to mmc_regulator_get_supply()Wolfram Sang
Especially, make clear what the return value means. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: export emmc revisionJin Qian
Expose emmc revision as part of device attributes. Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: sd: Fix signal voltage when there is no power cycleAdrian Hunter
Some boards have SD card connectors where the power rail cannot be switched off by the driver. However there are various circumstances when a card might be re-initialized, such as after system resume, warm re-boot, or error handling. However, a UHS card will continue to use 1.8V signaling unless it is power cycled. If the card has not been power cycled, it may still be using 1.8V signaling. According to the SD spec., the Bus Speed Mode (function group 1) bits 2 to 4 are zero if the card is initialized at 3.3V signal level. Thus they can be used to determine if the card has already switched to 1.8V signaling. Detect that situation and try to initialize a UHS-I (1.8V) transfer mode. Tested with the following cards: Transcend 4GB High Speed Kingston 64GB SDR104 Lexar by Micron HIGH-PERFORMANCE 300x 16GB DDR50 SanDisk Ultra 8GB DDR50 Transcend Ultimate 600x 16GB SDR104 Transcend Premium 300x 64GB SDR104 Lexar by Micron Professional 1000x 32GB UHS-II SDR104 SanDisk Extreme Pro 16GB SDR104 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Zhoujie Wu <zjwu@marvell.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: Factor out mmc_host_set_uhs_voltage()Adrian Hunter
Factor out mmc_host_set_uhs_voltage() so it can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: Export a few functions needed for blkmq supportAdrian Hunter
The following functions are needed by the mmc block device driver, once it converts to blkmq, therefore let's export them. mmc_start_bkops() mmc_start_request() mmc_retune_hold_now() mmc_retune_release() Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Factor out mmc_setup_queue()Adrian Hunter
Factor out some common code that will also be used with blk-mq. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Prepare CQE dataAdrian Hunter
Enhance mmc_blk_data_prep() to support CQE requests. That means adding some things that for non-CQE requests would be encoded into the command arguments - such as the block address, reliable-write flag, and data tag flag. Also the request tag is needed to provide the command queue task id, and a comment is added to explain the future possibility of defining a priority. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Use local variables in mmc_blk_data_prep()Adrian Hunter
Use local variables in mmc_blk_data_prep() in preparation for adding CQE support which doesn't use the output variables. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mmc: Enable CQE'sAdrian Hunter
Enable or disable CQE when a card is added or removed respectively. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mmc: Enable Command QueuingAdrian Hunter
Enable the Command Queue if the host controller supports a command queue engine. It is not compatible with Packed Commands, so make a note of that in the comment. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: Add support for handling CQE requestsAdrian Hunter
Add core support for handling CQE requests, including starting, completing and recovering. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: Introduce host claiming by contextAdrian Hunter
Currently the host can be claimed by a task. Change this so that the host can be claimed by a context that may or may not be a task. This provides for the host to be claimed by a block driver queue to support blk-mq, while maintaining compatibility with the existing use of mmc_claim_host(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: core: Remove unnecessary host claimAdrian Hunter
Callers already have the host claimed, so remove the unnecessary calls to mmc_claim_host() and mmc_release_host(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Fix bug when removing RPMB chardevLinus Walleij
I forgot to account for the fact that the device core holds a reference to a device added with device_initialize() that need to be released with a corresponding put_device() to reach a 0 refcount at the end of the lifecycle. This led to a NULL pointer reference when freeing the device when e.g. unbidning the host device in sysfs. Fix this and use the device .release() callback to free the IDA and free:ing the memory used by the RPMB device. Before this patch: /sys/bus/amba/drivers/mmci-pl18x$ echo 80114000.sdi4_per2 > unbind [ 29.797332] mmc3: card 0001 removed [ 29.810791] Unable to handle kernel NULL pointer dereference at virtual address 00000050 [ 29.818878] pgd = de70c000 [ 29.821624] [00000050] *pgd=1e70a831, *pte=00000000, *ppte=00000000 [ 29.827911] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 29.833282] Modules linked in: [ 29.836334] CPU: 1 PID: 154 Comm: sh Not tainted 4.14.0-rc3-00039-g83318e309566-dirty #736 [ 29.844604] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [ 29.851562] task: de572700 task.stack: de742000 [ 29.856079] PC is at kernfs_find_ns+0x8/0x100 [ 29.860443] LR is at kernfs_find_and_get_ns+0x30/0x48 After this patch: /sys/bus/amba/drivers/mmci-pl18x$ echo 80005000.sdi4_per2 > unbind [ 20.623382] mmc3: card 0001 removed Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Reported-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Delete mmc_access_rpmb()Linus Walleij
This function is used by the block layer queue to bail out of requests if the current request is towards an RPMB "block device". This was done to avoid boot time scanning of this "block device" which was never really a block device, thus duct-taping over the fact that it was badly engineered. This problem is now gone as we removed the offending RPMB block device in another patch and replaced it with a character device. Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: block: Convert RPMB to a character deviceLinus Walleij
The RPMB partition on the eMMC devices is a special area used for storing cryptographically safe information signed by a special secret key. To write and read records from this special area, authentication is needed. The RPMB area is *only* and *exclusively* accessed using ioctl():s from userspace. It is not really a block device, as blocks cannot be read or written from the device, also the signed chunks that can be stored on the RPMB are actually 256 bytes, not 512 making a block device a real bad fit. Currently the RPMB partition spawns a separate block device named /dev/mmcblkNrpmb for each device with an RPMB partition, including the creation of a block queue with its own kernel thread and all overhead associated with this. On the Ux500 HREFv60 platform, for example, the two eMMCs means that two block queues with separate threads are created for no use whatsoever. I have concluded that this block device design for RPMB is actually pretty wrong. The RPMB area should have been designed to be accessed from /dev/mmcblkN directly, using ioctl()s on the main block device. It is however way too late to change that, since userspace expects to open an RPMB device in /dev/mmcblkNrpmb and we cannot break userspace. This patch tries to amend the situation using the following strategy: - Stop creating a block device for the RPMB partition/area - Instead create a custom, dynamic character device with the same name. - Make this new character device support exactly the same set of ioctl()s as the old block device. - Wrap the requests back to the same ioctl() handlers, but issue them on the block queue of the main partition/area, i.e. /dev/mmcblkN We need to create a special "rpmb" bus type in order to get udev and/or busybox hot/coldplug to instantiate the device node properly. Before the patch, this appears in 'ps aux': 101 root 0:00 [mmcqd/2rpmb] 123 root 0:00 [mmcqd/3rpmb] After applying the patch these surplus block queue threads are gone, but RPMB is as usable as ever using the userspace MMC tools, such as 'mmc rpmb read-counter'. We get instead those dynamice devices in /dev: brw-rw---- 1 root root 179, 0 Jan 1 2000 mmcblk0 brw-rw---- 1 root root 179, 1 Jan 1 2000 mmcblk0p1 brw-rw---- 1 root root 179, 2 Jan 1 2000 mmcblk0p2 brw-rw---- 1 root root 179, 5 Jan 1 2000 mmcblk0p5 brw-rw---- 1 root root 179, 8 Jan 1 2000 mmcblk2 brw-rw---- 1 root root 179, 16 Jan 1 2000 mmcblk2boot0 brw-rw---- 1 root root 179, 24 Jan 1 2000 mmcblk2boot1 crw-rw---- 1 root root 248, 0 Jan 1 2000 mmcblk2rpmb brw-rw---- 1 root root 179, 32 Jan 1 2000 mmcblk3 brw-rw---- 1 root root 179, 40 Jan 1 2000 mmcblk3boot0 brw-rw---- 1 root root 179, 48 Jan 1 2000 mmcblk3boot1 brw-rw---- 1 root root 179, 33 Jan 1 2000 mmcblk3p1 crw-rw---- 1 root root 248, 1 Jan 1 2000 mmcblk3rpmb Notice the (248,0) and (248,1) character devices for RPMB. Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-04mmc: Delete bounce buffer handlingLinus Walleij
In may, Steven sent a patch deleting the bounce buffer handling and the CONFIG_MMC_BLOCK_BOUNCE option. I chose the less invasive path of making it a runtime config option, and we merged that successfully for kernel v4.12. The code is however just standing in the way and taking up space for seemingly no gain on any systems in wide use today. Pierre says the code was there to improve speed on TI SDHCI controllers on certain HP laptops and possibly some Ricoh controllers as well. Early SDHCI controllers lacked the scatter-gather feature, which made software bounce buffers a significant speed boost. We are clearly talking about the list of SDHCI PCI-based MMC/SD card readers found in the pci_ids[] list in drivers/mmc/host/sdhci-pci-core.c. The TI SDHCI derivative is not supported by the upstream kernel. This leaves the Ricoh. What we can however notice is that the x86 defconfigs in the kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which means that any such laptop would have to have a custom configured kernel to actually take advantage of this bounce buffer speed-up. It simply seems like there was a speed optimization for the Ricoh controllers that noone was using. (I have not checked the distro defconfigs but I am pretty sure the situation is the same there.) Bounce buffers increased performance on the OMAP HSMMC at one point, and was part of the original submission in commit a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") This optimization was removed in commit 0ccd76d4c236 ("omap_hsmmc: Implement scatter-gather emulation") which found that scatter-gather emulation provided even better performance. The same was introduced for SDHCI in commit 2134a922c6e7 ("sdhci: scatter-gather (ADMA) support") I am pretty positively convinced that software scatter-gather emulation will do for any host controller what the bounce buffers were doing. Essentially, the bounce buffer was a reimplementation of software scatter-gather-emulation in the MMC subsystem, and it should be done away with. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: Steven J. Hill <Steven.Hill@cavium.com> Suggested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-02mmc: core: add driver strength selection when selecting hs400esChanho Min
The driver strength selection is missed and required when selecting hs400es. So, It is added here. Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: stable@vger.kernel.org Signed-off-by: Hankyung Yu <hankyung.yu@lge.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-09-08mmc: block: Fix incorrectly initialized requestsAdrian Hunter
mmc_init_request() depends on card->bouncesz so it must be calculated before blk_init_allocated_queue() starts allocating requests. Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the..") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2017-08-30Merge branch 'fixes' into nextUlf Hansson
2017-08-30mmc: core: Move mmc_start_areq() declarationAdrian Hunter
mmc_start_areq() is an internal mmc core API. Move the declaration accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: cast a informative log for no devidx availableShawn Lin
The intention for this patch is to help folks debug the failure like this: dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. dwmmc_rockchip fe320000.dwmmc: Version ID is 270a dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo dwmmc_rockchip fe320000.dwmmc: Got CD GPIO mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) mmc0: new high speed SDHC card at address 0007 mmcblk: probe of mmc0:0007 failed with error -28 The reason may be some buggy userspace daemon miss the disk remove uevent sometimes so it would finally make the SD card not work. So from the dmesg it only shows a errno of -28 but still don't understand what happened. For quick reproduce this, we could set max_devices to 8 and run for i in $(seq 1 9); do echo "========================" $i echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/unbind sleep .5 echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/bind sleep .5 mount -t vfat /dev/mmcblk0 /mnt sleep .5 done Another possible reason would be the device has more partitions than what we support, so that they have to increase their max_devices. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Reparametrize mmc_blk_ioctl_[multi]_cmd()Linus Walleij
Instead of passing a block device to mmc_blk_ioctl[_multi]_cmd(), let's pass struct mmc_blk_data() so we operate ioctl()s on the MMC block device representation rather than the vanilla block device. This saves a little duplicated code and makes it possible to issue ioctl()s not targeted for a specific block device but rather for a specific partition/area. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Refactor mmc_blk_part_switch()Linus Walleij
Instead of passing a struct mmc_blk_data * to mmc_blk_part_switch() let's pass the actual partition type we want to switch to. This is necessary in order not to have a block device with a backing mmc_blk_data and request queue and all for every hardware partition, such as RPMB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Move duplicate checkLinus Walleij
mmc_blk_ioctl() calls either mmc_blk_ioctl_cmd() or mmc_blk_ioctl_multi_cmd() and each of these make the same check. Factor it into a new helper function, call it on both branches of the switch() statement and save a chunk of duplicate code. Cc: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: debugfs: Move block debugfs into block moduleLinus Walleij
If we don't have the block layer enabled, we do not present card status and extcsd in the debugfs. Debugfs is not ABI, and maintaining files of no relevance for non-block devices comes at a high maintenance cost if we shall support it with the block layer compiled out. The debugfs entries suffer from all the same starvation issues as the other userspace things, under e.g. a heavy dd operation. The expected number of debugfs users utilizing these two debugfs files is already low as there is an ioctl() to get the same information using the mmc-tools, and of these few users the expected number of people using it on SDIO or combo cards are expected to be zero. It is therefore logical to move this over to the block layer when it is enabled, using the new custom requests and issue it using the block request queue. On the other hand it moves some debugfs code from debugfs.c and into block.c. Tested during heavy dd load by cat:in the status file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: ops: export mmc_get_status()Linus Walleij
This function retrieves the status of the card with the default number of retries. Since the block layer wants to use this, and since the block layer is a loadable kernel module, we need to export this symbol. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Anonymize the drv op data pointerLinus Walleij
We have a data pointer for the ioctl() data, but we need to pass other data along with the DRV_OP:s, so make this a void * so it can be reused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: test: reduce stack usage in mmc_test_nonblock_transferArnd Bergmann
The new lockdep annotations for completions cause a warning in the mmc test module, in a function that now has four 150 byte structures on the stack: drivers/mmc/core/mmc_test.c: In function 'mmc_test_nonblock_transfer.constprop': drivers/mmc/core/mmc_test.c:892:1: error: the frame size of 1360 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The mmc_test_ongoing_transfer function evidently had a similar problem, and worked around it by using dynamic allocation. This generalizes the approach used by mmc_test_ongoing_transfer() and applies it to mmc_test_nonblock_transfer() as well. Fixes: cd8084f91c02 ("locking/lockdep: Apply crossrelease to completions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Turn off CQE before sending commandsAdrian Hunter
CQE needs to be off for the host controller to accept non-CQ commands. Turn off the CQE before sending commands, and ensure it is off in any reset or power management paths, or re-tuning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Add mmc_retune_hold_now()Adrian Hunter
mmc_return_hold() / mmc_retune_release() are used around a group of commands to prevent re-tuning between the commands. Re-tuning can still happen before the first command. In some cases, re-tuning must be prevented entirely. Add mmc_retune_hold_now() for that purpose. It is added in preparation for CQE support where it will be used by CQE recovery. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: Remove unused MMC_CAP2_PACKED_CMDAdrian Hunter
Packed commands support was removed but some bits got left behind. Remove them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: remove the check of mmc_card_blockaddr for SD cardsShawn Lin
Per the SD physical layer simplified specification V4.10, section 4.6.2, CSD version 1.0 SD card should use taac, nsac and r2w_factor for calculating the data access time. But the taac and nsac for SDHC(CSD version 2.0) are always fixed and the software should use the recommended value for timeout. When parsing the CSD, we sanely set them to zero for SDHC(CSD version 2.0), all the calculation for timeout_ns and timeout_clk is zero as well. So what we actually want to limit here is either SDHC case or unreasonable timeout reported by the cards. In principle we should at least be able to remove the bogus check for the mmc_card_blockaddr. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: correct taac parameter according to the specificationShawn Lin
Per the spec of JESD84-B51, section 7.3, replace tacc with taac to fix the obvious typo. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Jan Glauber <jglauber@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: linux-mmc@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Tested-by: Steven J. Hill <Steven.Hill@cavium.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: turn the pr_info under CONFIG_MMC_DEBUG into pr_debugShawn Lin
There are lots of debug message in core.c which use pr_debug for better dynamic log level control. So it doesn't make sense for those print to still keep working only under CONFIG_MMC_DEBUG. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: always check the length of sglist with total data sizeShawn Lin
All the check within mmc_mrq_prep seems to be all-or-none proposition, so it doesn't make sense to only check the length of sglist only under the CONFIG_MMC_DEBUG context. I'd prefer to always keep the check there unconditionally. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: remove check of host->removed for rescan routineShawn Lin
The intention of this check was to prevent the conflict between hotplug and removing driver for whatever reason. Currently it doesn't improve anything and the following rescan process could still saftly perform the scan flow. So these code seems pointless now and let's remove them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: remove unused struct mmc_card *cardShawn Lin
It was never used and introduced a long standing compile warning: drivers/mmc/core/block.c: In function 'power_ro_lock_store': drivers/mmc/core/block.c:191:19: warning: variable 'card' set but not used [-Wunused-but-set-variable] Remove it to fix the warning. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mmc_ops: fix a typo for comment of mmc_start_bkopsShawn Lin
Just a trivial fix for that found by reading the code. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: Fix block status codesAdrian Hunter
Commit 2a842acab109 ("block: introduce new block status code type") changed the error type but not in patches merged through the mmc tree, like commit 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver op"). Fix one error code that is incorrect and also use BLK_STS_OK in preference to 0. Fixes: 17ece345a042 ("Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-21mmc: block: prevent propagating R1_OUT_OF_RANGE for open-ending modeShawn Lin
We to some extent should tolerate R1_OUT_OF_RANGE for open-ending mode as it is expected behaviour and most of the backup partition tables should be located near some of the last blocks which will always make open-ending read exceed the capacity of cards. Fixes: 9820a5b11101 ("mmc: core: for data errors, take response of stop cmd into account") Fixes: a04e6bae9e6f ("mmc: core: check also R1 response for stop commands") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-09mmc: block: fix lockdep splat when removing mmc_block moduleMichał Mirosław
Fix lockdep splat introduced in v4.13-rc4. [ 266.297226] ------------[ cut here ]------------ [ 266.300078] WARNING: CPU: 2 PID: 176 at /mnt/src/jaja/git/tf300t/include/linux/blkdev.h:657 mmc_blk_remove_req+0xd0/0xe8 [mmc_block] [ 266.302937] Modules linked in: mmc_block(-) sdhci_tegra sdhci_pltfm sdhci pwrseq_simple pwrseq_emmc mmc_core [ 266.305941] CPU: 2 PID: 176 Comm: rmmod Tainted: G W 4.13.0-rc4mq-00208-gb691e67724b8-dirty #694 [ 266.308852] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 266.311719] [<b011144c>] (unwind_backtrace) from [<b010ca54>] (show_stack+0x18/0x1c) [ 266.314664] [<b010ca54>] (show_stack) from [<b062e3f4>] (dump_stack+0x84/0x98) [ 266.317644] [<b062e3f4>] (dump_stack) from [<b01214f4>] (__warn+0xf4/0x10c) [ 266.320542] [<b01214f4>] (__warn) from [<b01215d4>] (warn_slowpath_null+0x28/0x30) [ 266.323534] [<b01215d4>] (warn_slowpath_null) from [<af067858>] (mmc_blk_remove_req+0xd0/0xe8 [mmc_block]) [ 266.326568] [<af067858>] (mmc_blk_remove_req [mmc_block]) from [<af068f40>] (mmc_blk_remove_parts.constprop.6+0x50/0x64 [mmc_block]) [ 266.329678] [<af068f40>] (mmc_blk_remove_parts.constprop.6 [mmc_block]) from [<af0693b8>] (mmc_blk_remove+0x24/0x140 [mmc_block]) [ 266.332894] [<af0693b8>] (mmc_blk_remove [mmc_block]) from [<af0052ec>] (mmc_bus_remove+0x20/0x28 [mmc_core]) [ 266.336198] [<af0052ec>] (mmc_bus_remove [mmc_core]) from [<b046aa64>] (device_release_driver_internal+0x164/0x200) [ 266.339367] [<b046aa64>] (device_release_driver_internal) from [<b046ab54>] (driver_detach+0x40/0x74) [ 266.342537] [<b046ab54>] (driver_detach) from [<b046982c>] (bus_remove_driver+0x68/0xdc) [ 266.345660] [<b046982c>] (bus_remove_driver) from [<af06ad40>] (mmc_blk_exit+0xc/0x2cc [mmc_block]) [ 266.348875] [<af06ad40>] (mmc_blk_exit [mmc_block]) from [<b01aee30>] (SyS_delete_module+0x1c4/0x254) [ 266.352068] [<b01aee30>] (SyS_delete_module) from [<b0108480>] (ret_fast_syscall+0x0/0x34) [ 266.355308] ---[ end trace f68728a0d3053b72 ]--- Fixes: 7c84b8b43d3d ("mmc: block: bypass the queue even if usage is present for hotplug") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-08mmc: mmc: correct the logic for setting HS400ES signal voltageHaibo Chen
Change the default err value to -EINVAL, make sure the card only has type EXT_CSD_CARD_TYPE_HS400_1_8V also do the signal voltage setting when select hs400es mode. Fixes: commit 1720d3545b77 ("mmc: core: switch to 1V8 or 1V2 for hs400es mode") Cc: <stable@vger.kernel.org> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-03mmc: block: bypass the queue even if usage is present for hotplugShawn Lin
The commit 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core") refactored mechanism of queue handling caused mmc_init_request() can be called just after mmc_cleanup_queue() caused null pointer dereference. Another commit bbdc74dc19e0 ("mmc: block: Prevent new req entering queue after its cleanup") tried to fix the problem. However it actually miss one corner case. We could still reproduce the issue mentioned with these steps: (1) insert a SD card and mount it (2) hotplug it, so it will leave md->usage still be counted (3) reboot the system which will sync data and umount the card [Unable to handle kernel NULL pointer dereference at virtual address 00000000 [user pgtable: 4k pages, 48-bit VAs, pgd = ffff80007bab3000 [[0000000000000000] *pgd=000000007a828003, *pud=0000000078dce003, *pmd=000000007aab6003, *pte=0000000000000000 [Internal error: Oops: 96000007 [#1] PREEMPT SMP [Modules linked in: [CPU: 3 PID: 3507 Comm: umount Tainted: G W 4.13.0-rc1-next-20170720-00012-g9d9bf45 #33 [Hardware name: Firefly-RK3399 Board (DT) [task: ffff80007a1de200 task.stack: ffff80007a01c000 [PC is at mmc_init_request+0x14/0xc4 [LR is at alloc_request_size+0x4c/0x74 [pc : [<ffff0000087d7150>] lr : [<ffff000008378fe0>] pstate: 600001c5 [sp : ffff80007a01f8f0 .... [[<ffff0000087d7150>] mmc_init_request+0x14/0xc4 [[<ffff000008378fe0>] alloc_request_size+0x4c/0x74 [[<ffff00000817ac28>] mempool_create_node+0xb8/0x17c [[<ffff00000837aadc>] blk_init_rl+0x9c/0x120 [[<ffff000008396580>] blkg_alloc+0x110/0x234 [[<ffff000008396ac8>] blkg_create+0x424/0x468 [[<ffff00000839877c>] blkg_lookup_create+0xd8/0x14c [[<ffff0000083796bc>] generic_make_request_checks+0x368/0x3b0 [[<ffff00000837b050>] generic_make_request+0x1c/0x240 So mmc_blk_put wouldn't calling blk_cleanup_queue which actually the QUEUE_FLAG_DYING and QUEUE_FLAG_BYPASS should stay. Block core expect blk_queue_bypass_{start, end} internally to bypass/drain the queue before actually dying the queue, so it didn't expose API to set the queue bypass. I think we should set QUEUE_FLAG_BYPASS whenever queue is removed, although the md->usage is still counted, as no dispatch queue could be found then. Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-13mmc: block: Prevent new req entering queue after its cleanupGrzegorz Sluja
The commit 304419d8a7e9 ("mmc: core: Allocate per-request data using the block layer core"), refactored the mechanism of queue handling, but also made mmc_init_request() to be called after mmc_cleanup_queue(). This triggers a null pointer dereference: [ 683.123791] BUG: unable to handle kernel NULL pointer dereference at (null) [ 683.123801] IP: mmc_init_request+0x2c/0xf0 [mmc_block] ... [ 683.123905] Call Trace: [ 683.123913] alloc_request_size+0x4f/0x70 [ 683.123919] mempool_alloc+0x5f/0x150 [ 683.123925] ? __enqueue_entity+0x6c/0x70 [ 683.123928] get_request+0x3ad/0x720 [ 683.123933] ? prepare_to_wait_event+0x110/0x110 [ 683.123937] blk_queue_bio+0xc1/0x3a0 [ 683.123940] generic_make_request+0xf8/0x2a0 [ 683.123942] submit_bio+0x75/0x150 [ 683.123947] submit_bio_wait+0x51/0x70 [ 683.123951] blkdev_issue_flush+0x5c/0x90 [ 683.123956] ext4_sync_fs+0x171/0x1b0 [ 683.123961] sync_filesystem+0x73/0x90 [ 683.123965] fsync_bdev+0x24/0x50 [ 683.123971] invalidate_partition+0x24/0x50 [ 683.123973] del_gendisk+0xb2/0x2a0 [ 683.123977] mmc_blk_remove_req.part.38+0x71/0xa0 [mmc_block] [ 683.123980] mmc_blk_remove+0xba/0x190 [mmc_block] [ 683.123990] mmc_bus_remove+0x1a/0x20 [mmc_core] [ 683.123995] device_release_driver_internal+0x141/0x200 [ 683.123999] device_release_driver+0x12/0x20 [ 683.124001] bus_remove_device+0xfd/0x170 [ 683.124004] device_del+0x1e8/0x330 [ 683.124012] mmc_remove_card+0x60/0xc0 [mmc_core] [ 683.124019] mmc_remove+0x19/0x30 [mmc_core] [ 683.124025] mmc_stop_host+0xfb/0x1a0 [mmc_core] [ 683.124032] mmc_remove_host+0x1a/0x40 [mmc_core] [ 683.124037] sdhci_remove_host+0x2e/0x1c0 [mmc_sdhci] [ 683.124042] sdhci_pci_remove_slot+0x3f/0x80 [sdhci_pci] [ 683.124045] sdhci_pci_remove+0x39/0x70 [sdhci_pci] [ 683.124049] pci_device_remove+0x39/0xc0 [ 683.124052] device_release_driver_internal+0x141/0x200 [ 683.124056] driver_detach+0x3f/0x80 [ 683.124059] bus_remove_driver+0x55/0xd0 [ 683.124062] driver_unregister+0x2c/0x50 [ 683.124065] pci_unregister_driver+0x29/0x90 [ 683.124069] sdhci_driver_exit+0x10/0x4f3 [sdhci_pci] [ 683.124073] SyS_delete_module+0x171/0x250 [ 683.124078] entry_SYSCALL_64_fastpath+0x1e/0xa9 Fix this by setting the queue DYING flag before cleanup the queue, as it prevents new reqs from entering the queue. Signed-off-by: Grzegorz Sluja <grzegorzx.sluja@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 304419d8a7e9 ("mmc: core: Allocate per-request data using the...") [Ulf: Updated the changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-14 15:09:25 +0000