summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-sprd.c
AgeCommit message (Collapse)Author
2021-10-12mmc: sdhci-sprd: Wait until DLL locked after being configuredZhenxiong Lai
According to the specification, DLL status has to be locked before using it. Signed-off-by: Zhenxiong Lai <zhenxiong.lai@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210926092835.146449-1-zhang.lyra@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-sprd: use sdhci_sprd_writewKrzysztof Kozlowski
The sdhci_sprd_writew() was defined by never used in sdhci_ops: drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: sdhci-sprd: Fix some resource leaks in the remove functionChristophe JAILLET
'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of 'mmc_remove_host()' and 'mmc_free_host()'. This avoids some resource leaks, is more in line with the error handling path of the probe function, and is more consistent with other drivers. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Orson Zhai <orson.zhai@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci-sprd: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). This fixes compile warning (!CONFIG_OF on x86_64): drivers/mmc/host/sdhci-sprd.c:723:34: warning: ‘sdhci_sprd_of_match’ defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Link: https://lore.kernel.org/r/20201120162344.485921-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: sdhci: fix indentation mistakesKrzysztof Kozlowski
Fix inconsistent indenting, reported by Smatch: drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting drivers/mmc/host/sdhci-sprd.c:390 sdhci_sprd_request_done() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200923153739.30327-2-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v5.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200903162412.5.I2b630c4d40ff4ea61d5b30b8ccfe95890e257100@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-28mmc: host: sdhci-sprd: Implement the request_atomic() APIBaolin Wang
Implement the request_atomic() API for nonremovable cards, that means we can submit next request in the irq hard handler context to reduce latency. Moreover factor out the AUTO CMD23 checking into a separate function to reduce duplicate code. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/60142fe6c6c1dbba2696e775564ae2166786f0bc.1586744073.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: host: Prepare host drivers for mmc_regulator_set_vqmmc() returning > 0Marek Vasut
Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for the fact that mmc_regulator_set_vqmmc() can return a value > 0, which would happen if the signal voltage switch did NOT happen, because the voltage was already set correctly. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20200416163649.336967-1-marex@denx.de [Ulf: Re-worked/simplified the code a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdhci-sprd: Drop redundant cap flagsUlf Hansson
The MMC_CAP_ERASE and MMC_CAP_CMD23 flags are already being set in the common sdhci_setup_host(). This makes it redundant to set them for sdhci-sprd, so let's drop them. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200406113724.8504-1-ulf.hansson@linaro.org
2020-03-24mmc: sdhci-sprd: Set the missing MMC_CAP_WAIT_WHILE_BUSY flagBaolin Wang
The Spreadtrum host controller supports HW busy detection for commands with R1B responses, but also for I/O operations. This means when the host gets a transfer complete event, that always indicates the busy signal is released. Let's inform the mmc core about this, via setting the corresponding MMC_CAP_WAIT_WHILE_BUSY flag, as to remove some redundant software busy polling. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/96f16647f6a6e8cb058c44e46c61b122df027059.1582535202.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: host: sdhci-sprd: Add software queue supportBaolin Wang
Add software queue support to improve the performance. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/f629b32943aae9e30ffa17acf4af06c270417001.1581478569.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: clear the UHS-I modes read from registersChunyan Zhang
sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I mode used by the specific card can be selected via devicetree only. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTIONChunyan Zhang
sprd's sd host controller doesn't support detection to card insert or remove. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKENChunyan Zhang
The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on sprd's sd host controller, set quirk2 to disable configuring this. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: add get_ro hook functionChunyan Zhang
sprd's sd host controller doesn't support write protect to sd card. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-30mmc: sdhci-sprd: fixed incorrect clock dividerChunyan Zhang
The register SDHCI_CLOCK_CONTROL should be cleared before config clock divider, otherwise the frequency configured maybe lower than we expected. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-06mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resumingBaolin Wang
The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-22mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()Baolin Wang
When the SD host controller tries to probe again due to the derferred probe mechanism, it will always keep the SD host device as runtime resume state due to missing the runtime put operation in error path last time. Thus add the pm_runtime_put_noidle() in error path to make the PM runtime counter balance, which can make the SD host device's PM runtime work well. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-sprd: Add pin control support for voltage switchBaolin Wang
For Spreadtrum SD card voltage switching, besides regulator setting, it also need switch related pin's state to output corresponding voltage. This patch adds pin control operation to support voltage switch. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-sprd: Add start_signal_voltage_switch opsBaolin Wang
For Spreadtrum SD host controller, we can not use standard SD registers to change and detect the I/O voltage signals, since our voltage regulator for I/O is fixed in hardware, and no signals were connected to the SD controller. Thus add Spreadtrum specific voltage switch ops to change voltage instead of using standard SD host registers. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Add PHY DLL delay configurationBaolin Wang
Set the PHY DLL delay for each timing mode, which is used to sample the clock accurately and make the clock more stable. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Enable PHY DLL to make clock stableBaolin Wang
For the Spreadtrum SD host controller, when we changed the clock to be more than 52M, we should enable the PHY DLL which is used to track the clock frequency to make the clock work more stable. Otherwise deviation may occur of the higher clock. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Add HS400 enhanced strobe modeBaolin Wang
Add HS400 enhanced strobe mode support for Spreadtrum SD host controller. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Implement the get_max_timeout_count() interfaceBaolin Wang
Implement the get_max_timeout_count() interface to set the Spredtrum SD host controller actual maximum timeout count. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Add optional gate clock supportBaolin Wang
For the Spreadtrum SC9860 platform, we should enable another gate clock '2x_enable' to make the SD host controller work well. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Check the enable clock's return value correctlyBaolin Wang
Missed to check the enable clock's return value, fix it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: sdhci-sprd: Add Spreadtrum's initial host controllerChunyan Zhang
This patch adds the initial support of Secure Digital Host Controller Interface compliant controller found in some latest Spreadtrum chipsets. This patch has been tested on the version of SPRD-R11 controller. R11 is a variant based on SD v4.0 specification. With this driver, R11 mmc can be initialized, can be mounted, read and written. Original-by: Billows Wu <billows.wu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-06-01 13:34:35 +0000