summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/tmio_mmc.h
AgeCommit message (Collapse)Author
2022-12-07mmc: tmio: remove tmio_mmc_k(un)map_atomic helpersWolfram Sang
After a8402aed8ca5 ("mmc: tmio_mmc_core: Remove local_irq_{save,restore}() around k[un]map_atomic()") and ac91578a6812 ("mmc: tmio_mmc_core: Replace kmap_atomic() with kmap_local_page()"), the helpers contain just a single call. Putting it directly in the code makes it actually more readable. More so, because we now avoid the 'offset' calculation when mapping/unmapping and just use it when we need it in the copy routines. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221102125430.28466-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio: add callback for dma irqWolfram Sang
We don't want to rely only on the access_end irq in the future, so implement a callback for dma irqs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio_mmc_core: Replace kmap_atomic() with kmap_local_page()Adrian Hunter
kmap_local_page() is equivalent to kmap_atomic() except that it does not disable page faults or preemption. Where possible kmap_local_page() is preferred to kmap_atomic() - refer kernel highmem documentation. In this case, there is no need to disable page faults or preemption, so replace kmap_atomic() with kmap_local_page(), and, correspondingly, kunmap_atomic() with kunmap_local(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221005101951.3165-13-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio_mmc_core: Remove local_irq_{save,restore}() around k[un]map_atomic()Adrian Hunter
A long time ago the kmap_atomic API required a slot to be provided which risked the possibility that other code might use the same slot at the same time. Disabling interrupts prevented the possibility of an interrupt handler doing that. However, that went away with commit 3e4d3af501cc ("mm: stack based kmap_atomic()"). When the second argument to kmap_atomic was removed by commit 482fce997e14 ("mmc: remove the second argument of k[un]map_atomic()"), local_irq_{save,restore}() should have been removed also. Remove it now. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221005101951.3165-12-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: tmio: avoid glitches when resettingWolfram Sang
If we reset because of an error, we need to preserve values for the clock frequency. Otherwise, glitches may be seen on the bus. To achieve that, we introduce a 'preserve' parameter to the reset function and the IP core specific reset callbacks to handle everything accordingly. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: tmio: remove outdated members from host structWolfram Sang
The wrappers are gone for two years now but they have still pointers reserved in the tmio_mmc_host struct. Remove them. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: f22084b662e5 ("mmc: tmio: remove superfluous callback wrappers") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220311140542.5407-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: renesas_sdhi: use custom mask for TMIO_MASK_ALLWolfram Sang
Populate the new member for custom mask values to make sure this value is applied whenever needed. Also, rename the define holding the value because this is not only about initialization anymore. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210304092903.8534-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: tmio: support custom irq masksWolfram Sang
SDHI Gen2+ has a different value for TMIO_MASK_ALL, so add a member to support that. If the member is not used, the previous default value is applied. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210223100830.25125-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: renesas_sdhi: Add a condition of cmd/data timeout for retuneYoshihiro Shimoda
According to the datasheet, this controller needs retune when cmd or data timeout happens. So, add a condition into .check_retune(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1608708622-29668-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: renesas_sdhi: populate hook for longer busy_waitWolfram Sang
Make use of the EXTOP bit in R-Car Gen3 SoCs to have a twice as large busy wait duration. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: tmio: add hook for custom busy_wait calculationWolfram Sang
Newer SDHI variants can 'wait while busy' longer than the generic TMIO. Provide a hook to get the maximum cycle count to wait for. If the hook is not populated, fall back to a generic version which works well with all older TMIO/SDHI variants. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: tmio: set max_busy_timeoutWolfram Sang
Set max_busy_timeouts for variants known to support the TOPxx bits in the SD_OPTION register. The timeout mechanism was running in the background but not yet properly handled in the driver. So, let the MMC core know when to not use R1B to avoid unhandled timeouts. My datasheets for older variants (tmio_mmc.c) suggest that they support it, too. However, actual bit descriptions are lacking, so I chose an opt-in approach. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: don't hardcode SDIF valuesWolfram Sang
Use a macro to name the hardcoded values. Also, move the SDIF register definition into the SDHI driver because this is an SDHI extension. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201111100244.15823-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-09mmc: tmio: add generic hook to fixup after a completed requestWolfram Sang
Sadly, due to HW bugs, we need a callback to work around issues just before completing the request. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200902081812.1591-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: tmio: remove indirection of 'execute_tuning' callbackWolfram Sang
After all the previous refactorization, we can now populate mmc_ops directly and don't need a layer inbetween. The NULL-pointer check and the error printout are already done by the MMC core. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200820132538.24758-7-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: tmio: remove indirection of 'hw_reset' callbackWolfram Sang
After Yamada-san's refactorization introducing 'tmio_mmc_host_alloc', we can populate mmc_ops directly and don't need a layer inbetween. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200820132538.24758-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: tmio: core: Add end operation into tmio_mmc_dma_opsYoshihiro Shimoda
Related drivers like renesas_sdhi_internal_dmac are possible to lack dma unmaping in error cases (for example response timeout). Since tmio_mmc_finish_request() will be always called in any case, to fix the issue, add end operation into struct tmio_mmc_dma_ops and call the operation in tmio_mmc_finish_request() to call dma_ummap API by the related drivers correctly. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: tmio: factor out TAP usageWolfram Sang
TAPs are Renesas SDHI specific. Now that we moved all handling to the SDHI core, we can also move the definitions from the TMIO struct to the SDHI one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200129203709.30493-6-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: tmio: enforce retune after runtime suspendWolfram Sang
Currently, select_tuning() is called after RPM resume. But select_tuning() needs some additional function calls to work correctly. Instead of reimplementing the whole postprocessing, just enforce retuning. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200129203709.30493-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: tmio: give callback a generic nameWolfram Sang
check_scc_error() is too Renesas specific. Let's just call it check_retune() to make it also easier understandable what it does. Only a rename, no functional change. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200129203709.30493-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: tmio: refactor tuning execution into SDHI driverWolfram Sang
Move Renesas specific code for executing the tuning with a SCC into the SDHI driver and leave only a generic call in the TMIO driver. Simplify the code a little by removing init_tuning() and prepare_tuning() callbacks. The latter is directly folded into the new execute_tuning() callbacks. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200129203709.30493-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: tmio: Avoid boilerplate code in ->runtime_suspend()Ulf Hansson
Rather than checking the 'runtime_synced' flag each time the ->runtime_suspend() callback is invoked, let's convert into using dev_pm_domain_start() during ->probe() and drop the corresponding boilerplate code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-13mmc: tmio: Fixup runtime PM management during probeUlf Hansson
The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-04-15mmc: tmio: introduce macro for max block sizeWolfram Sang
We will need it later for other calculations. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: renesas_sdhi: update copyright informationWolfram Sang
Mostly year updates, but one addition as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-26mmc: tmio: fix access width of Block Count RegisterTakeshi Saito
In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: tmio: introduce mask for 'always 1' bitsWolfram Sang
Some variants (namely Renesas SDHI) have bits in the STATS and IRQ_MASK registers which are 'always 1' and should be written as such. Introduce a seperate mask for this and apply it whenever such a register is written. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi: add initial setting of interrupt mask registerNiklas Söderlund
The initial value of the interrupt mask register may be different from the H/W manual at the startup of the kernel by setting from the bootloader. Since the error interrupts may be unmasked, the driver sets initial value. The initial value is only known for R-Car Gen2 and Gen3 platforms so limit the initialization to those platforms. Based on work from Masaharu Hayakawa. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: simplify the DMA mode testMasahiro Yamada
host->chan_{rx,tx} represents the DMA capability of the platform. Even if DMA is supported, there are cases where we want to use PIO, for example, data length is short enough as commit 5f52c3552946 ("mmc: tmio: use PIO for short transfers") mentioned. Regarding the hardware control flow, we are interested in whether DMA is currently enabled or not, instead of whether the platform has the DMA capability. Hence, the several conditionals in tmio_mmc_core.c end up with checking host->chan_{rx,tx} and !host->force_pio. This is not nice. Let's flip the flag host->force_pio into host->dma_on. host->dma_on represents whether the DMA is currently enabled or not. This flag is set false in the beginning of each command, then should be set true by tmio_mmc_start_dma() when the DMA is turned on. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flagMasahiro Yamada
TMIO_MMC_HAVE_HIGH_REG is confusing due to its counter-intuitive name. All the TMIO MMC variants (TMIO MMC, Renesas SDHI, UniPhier SD) actually have high registers. It is just that each of them implements its own registers there. The original IP from Panasonic only defines registers 0x00-0xff in the bus_shift=1 review. The register area above them is platform-dependent. In fact, TMIO_MMC_HAVE_HIGH_REG is set only by tmio-mmc.c and used to test the accessibility of CTL_SDIO_REGS. Because it is specific to the TMIO MFD variant, the right thing to do is to move such registers to tmio_mmc.c and delete the TMIO_MMC_HAVE_HIGH_REG flag. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: move MFD variant reset to a platform hookMasahiro Yamada
CTL_RESET_SDIO register is specific to the TMIO MFD (tmio_mmc.c). Add a new hook host->reset() for performing a platform-specific reset sequence, and move CTL_RESET_SDIO over there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: tmio: move tmio_mmc_set_clock() to platform hookMasahiro Yamada
tmio_mmc_set_clock() is full of quirks because different SoC vendors extended this in different ways. The original IP defines the divisor range 1/2 ... 1/512. bit 7 is set: 1/512 bit 6 is set: 1/256 ... bit 0 is set: 1/4 all bits clear: 1/2 It is platform-dependent how to achieve the 1/1 clock. I guess the TMIO-MFD variant uses the clock selector outside of this IP, as far as I see tmio_core_mmc_clk_div() in drivers/mfd/tmio_core.c I guess bit[7:0]=0xff is Renesas-specific extension. Socionext (and Panasonic) uses bit 10 (CLKSEL) for 1/1. Also, newer versions of UniPhier SoC variants use bit 16 for 1/1024. host->clk_update() is only used by the Renesas variants, whereas host->set_clk_div() is only used by the TMIO-MFD variants. To cope with this mess, promote tmio_mmc_set_clock() to a new platform hook ->set_clock(), and melt the old two hooks into it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: use SPDX identifier for Renesas driversWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16mmc: tmio: add eMMC HS400 mode supportMasaharu Hayakawa
This patch adds processing for selecting HS400 mode. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-18mmc: tmio: remove dma_ops from tmio_mmc_host_probe() argumentMasahiro Yamada
Drivers need to set up various struct members for tmio_mmc_host before calling tmio_mmc_host_probe(). Do likewise for host->dma_ops instead of passing it as a function argument. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-18mmc: tmio: move clk_enable/disable out of tmio_mmc_host_probe()Masahiro Yamada
The clock is enabled in the tmio_mmc_host_probe(). It also prevents drivers from performing platform-specific settings before mmc_add_host() because the register access generally requires a clock. Enable/disable the clock in drivers' probe/remove. Also, I passed tmio_mmc_data to tmio_mmc_host_alloc() because renesas_sdhi_clk_enable() needs it to get the private data from tmio_mmc_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-21mmc: tmio: use io* accessors consistentlyWolfram Sang
Because we started using io*_rep accessors previously because they are more widely defined across architectures, let's be consistent and use this family for all accessor wrappers. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio: change bus_shift to unsigned intMasahiro Yamada
Sane values for bus_shift are: 0 - for 16 bit bus 1 - for 32 bit bus 2 - for 64 bit bus "unsigned long" is too much. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio,renesas_sdhi: move ssc_tappos to renesas_sdhi.hMasahiro Yamada
struct tmio_mmc_host has "scc_tappos", but in fact, it is Renesas private data. Move it to renesas_sdhi.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio, renesas_sdhi: move Renesas-specific DMA data to renesas_sdhi.hMasahiro Yamada
struct tmio_mmc_host has "dma_dataend" and "dma_complete", but in fact, they are Renesas private data. Move them to renesas_sdhi.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio, renesas_sdhi: move struct tmio_mmc_dma to renesas_sdhi.hMasahiro Yamada
struct tmio_mmc_dma looks like TMIO core data, but in fact, Renesas private data. Move it to renesas_sdhi.h (probably, it is better to rename it to renesas_sdhi_dma, or squash it into struct renesas_sdhi). I also moved struct renesas_sdhi and host_to_priv() to that header because they are necessary to convert the tmio_mmc_host pointer into the renesas_sdhi pointer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio, renesas_sdhi: set mmc_host_ops hooks directlyMasahiro Yamada
Drivers can set any mmc_host_ops hooks between tmio_mmc_host_alloc() and tmio_mmc_host_probe(). Remove duplicated hooks in tmio_mmc_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: move mmc_host_ops to struct tmio_mmc_host from static dataMasahiro Yamada
Currently, tmio_mmc_ops is static data and tmio_mmc_host_probe() updates some hooks in the static data. This is a problem when two or more instances call tmio_mmc_host_probe() and each of them requests to use its own card_busy/start_signal_voltage_switch. We can borrow a solution from sdhci_alloc_host(). Copy the whole ops structure to host->mmc_host_ops, then override the hooks in malloc'ed data. Constify tmio_mmc_ops since it is now a template ops used by default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: use ioread* for repeated access to a registerWolfram Sang
Not all archs define reads* and writes*. Switch to ioread*_rep and friends which is defined everywhere, so we can enable COMPILE_TEST after that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: no magic values when enabling DMAWolfram Sang
Use a proper define. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: add references to bit defines in the headerWolfram Sang
When defining bits, make sure we always have a reference to the register they belong to. For now, renaming all bits properly seems too intrusive, so at least make sure we have proper documentation. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: remove obsolete TMIO_BBSWolfram Sang
Since commit 10c7fcbd0f00a0 ("ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support"), this define is not needed anymore. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMACSimon Horman
Add a new variant of the SDHI driver to support R-Car Gen3 with DMA via on-chip bus mastering. Since the DMAC is in a part of the SDHI module it is not suitable to be used via DMA Engine. Clearing of DM_CM_INFO1 after DMA thanks to Dirk Behme Cc: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio, renesas-sdhi: add dataend to DMA opsSimon Horman
Add dataend to DMA ops to allow DMAC implementation dependent handling of DMA data end. Also implement the operation for SDHI. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: improve checkpatch cleannessSimon Horman
Trivial updates to improve checkpatch cleanness. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-03 07:04:00 +0000