summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12mmc: simplify SDHCI Kconfig dependenciesArnd Bergmann
We have a number of front-end drivers for SDHCI_PLTFM, some of them use 'select MMC_SDHCI_PLTFM', others use 'depends on'. This is inconsistent and confusing, and in one case has also led to a build error because of incomplete dependencies: warning: (MMC_SDHCI_PXAV3 && MMC_SDHCI_PXAV2 && MMC_SDHCI_BCM_KONA) selects MMC_SDHCI_PLTFM which has unmet direct dependencies (MMC && MMC_SDHCI) drivers/built-in.o: In function `sdhci_sirf_resume': :(.text+0xaaacb4): undefined reference to `sdhci_resume_host' drivers/built-in.o: In function `sdhci_sirf_suspend': :(.text+0xaaacf8): undefined reference to `sdhci_suspend_host' drivers/built-in.o: In function `sdhci_sirf_probe': :(.text+0xaaaf44): undefined reference to `sdhci_add_host' :(.text+0xaaaf50): undefined reference to `sdhci_remove_host' This changes Kconfig to use 'depends on MMC_SDHCI_PLTFM' for all these cases, to fix the build error and make the logic more logical. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12mmc: omap: don't select TPS65010Arnd Bergmann
The MMC host driver should not select the pmic driver, since that may have other dependencies, notably i2c in this case. It's not clear what the exact requirement of the driver is, but to preserve the behavior, this patch changes the 'select' into 'depends on', meaning you now have to turn on TPS65010 explicitly and then MMC_OMAP. Found during randconfig build testing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-omap@vger.kernel.org Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12mmc: mvsdio: avoid compiler warningArnd Bergmann
gcc correctly points out that hw_state can be used uninitially in the mvsd_setup_data() function. This rearranges the function to ensure it always contains a proper value. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Chris Ball <chris@printf.net> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-mmc@vger.kernel.org Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12mmc: atmel-mci: incude asm/cacheclush.hArnd Bergmann
This avoids a build error due to the use of flush_dcache_page. drivers/mmc/host/atmel-mci.c: In function 'atmci_read_data_pio': drivers/mmc/host/atmel-mci.c:1870:5: error: implicit declaration of function 'flush_dcache_page' [-Werror=implicit-function-declaration] flush_dcache_page(sg_page(sg)); ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12mmc: sdhci-msm: Fix fallout from sdhci refactoringStephen Boyd
The sdhci core was refactored recently and some of those refactorings required changes in every sdhci platform driver. Those updates happened around the same time as when the msm driver was merged so the refactorings missed the msm driver. Hook in the basic library functions so that we can boot apq8074 dragonboards again instead of crashing when we try to jump to NULL function pointers. Reported-by: Kevin Hilman <khilman@linaro.org> Cc: Georgi Djakov <gdjakov@mm-sol.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Reviewed-by: Georgi Djakov <gdjakov@mm-sol.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-12mmc: usdhi6rol0: fix compiler warningsGuennadi Liakhovetski
Fix a number of wrong print formats. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-06-10Merge tag 'mmc-updates-for-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.16: Core: - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v - if card init at 3.3v doesn't work, try 1.8v and 1.2v too Drivers: - moxart: New driver for MOXA ART SoCs - rtsx_usb_sdmmc: New driver for Realtek USB card readers - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support - sunxi: New driver for Allwinner sunxi SoCs - usdhi6rol0: New driver for Renesas SD/SDIO controller" * tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits) mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller mmc: sdhci-of-esdhc: Fixup compile error mmc: tegra: fix reporting of base clock frequency mmc: tegra: disable UHS modes mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler MAINTAINERS: mmc: Add path to git tree mmc: dove: fix missing MACH_DOVE dependency mmc: sdhci: SD tuning is broken for some controllers mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support mmc: omap_hsmmc: split omap-dma header file mmc: omap_hsmmc: fix cmd23 multiblock read/write mmc: omap_hsmmc: use devm_ioremap_resource mmc: omap_hsmmc: use devm_request_threaded_irq mmc: omap_hsmmc: use devm_request_irq mmc: omap_hsmmc: use devm_clk_get mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value mmc: omap: Use DIV_ROUND_UP instead of open coded ...
2014-06-07Merge tag 'clk-for-linus-3.16' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux into next Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.16 are pretty typical: mostly clock driver additions and fixes. There are additions to the clock core code for some of the basic types (e.g. the common divider type has some fixes and featured added to it). One minor annoyance is a last-minute dependency that wasn't handled quite right. Commit ba0fae3b06a6 ("clk: berlin: add core clock driver for BG2/BG2CD") in this pull request depends on include/dt-bindings/clock/berlin2.h, which is already in your tree via the arm-soc pull request. Building for the berlin platform will break when the clk tree is built on it's own, but merged into your master branch everything should be fine" * tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits) mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs clk: export __clk_round_rate for providers clk: versatile: free icst on error return clk: qcom: Return error pointers for unimplemented clocks clk: qcom: Support msm8974pro global clock control hardware clk: qcom: Properly support display clocks on msm8974 clk: qcom: Support display RCG clocks clk: qcom: Return highest rate when round_rate() exceeds plan clk: qcom: Fix mmcc-8974's PLL configurations clk: qcom: Fix clk_rcg2_is_enabled() check clk: berlin: add core clock driver for BG2Q clk: berlin: add core clock driver for BG2/BG2CD clk: berlin: add driver for BG2x complex divider cells clk: berlin: add driver for BG2x simple PLLs clk: berlin: add driver for BG2x audio/video PLL clk: st: Terminate of match table clk/exynos4: Fix compilation warning ARM: shmobile: r8a7779: Add clock index macros for DT sources clk: divider: Fix overflow in clk_divider_bestdiv clk: u300: Terminate of match table ...
2014-06-06Merge tag 'mfd-for-linus-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
2014-06-04mmc: sdhci-s3c: use mmc_of_parse and remove the card_taskletJaehoon Chung
Fix the compile error. (Removed the card_tasklet at "mmc: sdhci: push card_tasklet into treaded irq handler") drivers/mmc/host/sdhci-s3c.c: In function ‘sdhci_s3c_notify_change’: drivers/mmc/host/sdhci-s3c.c:402:25: error: ‘struct sdhci_host’ has no member named ‘card_tasklet’ Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-06-03mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCsDavid Lanzendörfer
The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in designware idmac controller, which is identical to the one found in the mmc-dw hosts. However the rest of the host is not identical to mmc-dw, it deals with sending stop commands in hardware which makes it significantly different from the mmc-dw devices. Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> [hdegoede@redhat.com: various cleanups and fixes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Chris Ball <chris@printf.net> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-06-03Merge branches 'ib-from-asoc-3.16', 'ib-from-pm-3.16', ↵Lee Jones
'ib-from-regulator-3.16', 'ib-mfd-gpio-3.16' and 'ib-mfd-mmc-memstick-3.16', tags 'ib-mfd-extcon-3.16', 'ib-mfd-omap-3.16' and 'ib-mfd-regulator-3.16' into ibs-for-mfd-merged
2014-06-02mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controllerGuennadi Liakhovetski
This patch adds a driver for the Renesas usdhi6rol0 SD/SDIO host controller in both PIO and DMA modes. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-06-02Merge tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc into nextLinus Torvalds
Pull MMC update from Ulf Hansson: "These patches are mainly updates for the mmci driver and have been tested in linux-next. Some ARM SoC related patches are also included and those have been acked from the corresponding maintainers to go through my mmc tree. Updates for mmci driver: - Put the device into low power state at system suspend. - Convert to the common mmc DT parser. - Add missing DT bindings needed for ux500. Updates for ARM ux500|u300: - Convert to the common mmc DT bindings. - Remove redundant board file for mmci platform data" * tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits) mmc: mmci: Enforce DMA configuration through DT mmc: mmci: Enforce max frequency configuration through DT mmc: mmci: Enforce mmc capabilities through DT mmc: mmci: Enforce DT for signal direction and feedback clock ARM: ux500: Remove redundant board file for mmci platform data ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href ARM: ux500: Add the mmc capabilities flags to DT mmc: mmci: Enable MMC_CAP_CMD23 mmc: mmci: Mark the DT bindings for highspeed mode as deprecated ARM: u300: Convert to the common mmc DT bindings for highspeed mode ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode ARM: ux500: Convert to the common mmc DT bindings for highspeed mode ARM: ux500: Add mmci signal directions and feeback clock in DT for href mmc: mmci: Use the common mmc DT parser mmc: mmci: Add DT bindings for feedback clock pin mmc: mmci: Add DT bindings for signal direction mmc: mmci: Update DT documentation mmc: mmci: Convert to devm functions mmc: mmci: Convert to the mmc gpio API mmc: mmci: Put the device into low power state at system suspend ...
2014-06-02mmc: mmci: Enforce DMA configuration through DTUlf Hansson
Remove the option to provide DMA configuration as platform data, enforce it through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-05-23mmc: sdhci-of-esdhc: Fixup compile errorUlf Hansson
The commit below introduced compile errors, let's fix them. mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacks Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23mmc: tegra: fix reporting of base clock frequencyAndrew Bresticker
Tegra SDHCI controllers, by default, report a base clock frequency of 208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the actual base clock frequency. This is because the clock rate is configured by the clock controller, which is external to the SD/MMC controller. Since the SD/MMC controller has no knowledge of how this clock is configured, it will simply report the maximum frequency. While the reported value can be overridden by setting BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on Tegra30 and later SoCs, just set CAP_CLOCK_BASE_BROKEN and supply sdhci_pltfm_clk_get_max_clock(), which simply does a clk_get_rate(), as the get_max_clock() callback. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23mmc: tegra: disable UHS modesAndrew Bresticker
Program TEGRA_SDHCI_VENDOR_MISC_CTRL so that UHS modes aren't advertised in SDHCI_CAPABILITIES_1. While the Tegra SDHCI controller does support these modes, they require Tegra-specific tuning and calibration routines which the driver does not support yet. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-23mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handlerSebastian Hesselbarth
f8ec589b86f6 ("mmc: sdhci-dove: allow GPIOs to be used for card detection on Dove" added a gpio based card detect interrupt handler that was hooked up into card_tasket. 3560db8e247a ("mmc: sdhci: push card_tasklet into threaded irq handler") now removed that very card_tasklet causing sdhci-dove to fail on build with: drivers/mmc/host/sdhci-dove.c: In function 'sdhci_dove_carddetect_irq': drivers/mmc/host/sdhci-dove.c:42:24: error: 'struct sdhci_host' has no member named 'card_tasklet' To fix both the build error and get a working gpio card detection without card_tasklet, replace sdhci_get_of_property() with more recent mmc_of_parse(). It takes care of gpio-based card detect passed through DT already and allows to remove the offending code sections dealing with removed card_tasklet. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: dove: fix missing MACH_DOVE dependencySebastian Hesselbarth
DT-enabled Dove moved over from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE Kconfig. This slipped through the cracks and now is a fix to allow to build Dove's SDHCI driver for mach-mvebu on v3.15-rc. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: SD tuning is broken for some controllersAl Cooper
The SD Host Controller spec states that the SD Host Controller can request that the driver send up to 40 CMD19's while doing tuning and that the total time the card spends responding must be < 150ms. The sdhci_execute_tuning() function in sdhci.c that loops through sending the CMD19's has multiple bugs. First it sets a "timeout" variable to 150 and a loop counter variable to 40. It then decrements both variables by 1 at the end of each loop. It tries to handle violations of the count and time by doing a break when BOTH variables are equal to zero, which can never happen because they we set to different values and decremented by 1 at the same time. The timeout variable is not based on time at all and is totally useless. The routine also considers a loop counter of zero to be an error which means that any controller that requests the max of 40 CMD19s will cause tuning to fail and be disabled. I've fixed these issues by allowing up to 40 CMD19's and I've removed any attempt to handle the 150ms time limit. Removing timeout checking seems safe here because each CMD19 is timeout protected and the max loop counters insures we don't loop forever. Adding timeout checking would not be as simple as snapping the time at the loop start and checking for 150ms to pass because the loop queues the CMD19's and uses events to wait for completion so the time would include all the normal scheduler latencies. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issueAisheng Dong
It's caused by the platform driver was still using MMC_TIMING_UHS_DDR50 for MMC DDR mode which needs update too. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Reported-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 supportPeter Guo
Add O2Micro/BayHubTech chip 8520 subversion B1 SD3.0 support. Add O2Micro/BayHubTech chip 8620 and 8621 SD3.0 support Enable Led function of 8520 chip. Signed-off-by: Peter Guo <peter.guo@bayhubtech.com> Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: split omap-dma header fileBalaji T K
moving dmaengine consumer specific function to omap-dmaengine.h to Resolve build failure seen with sh-allmodconfig: include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1 Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: fix cmd23 multiblock read/writeBalaji T K
Check for set block count command fails always since host->cmd is set to NULL in the same function incorrectly. Correct host->cmd usage properly. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: use devm_ioremap_resourceBalaji T K
With devm_ioremap_resource conversion release_mem_region, iounmap can be removed in clean up path Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: use devm_request_threaded_irqBalaji T K
With devm_request_threaded_irq conversion free_irq can be removed in clean up path Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: use devm_request_irqBalaji T K
With devm_request_irq conversion free_irq can be removed in clean up path Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap_hsmmc: use devm_clk_getBalaji T K
With devm_clk_get conversion clk_put can be removed in clean up path Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCsDavid Lanzendörfer
The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in designware idmac controller, which is identical to the one found in the mmc-dw hosts. However the rest of the host is not identical to mmc-dw, it deals with sending stop commands in hardware which makes it significantly different from the mmc-dw devices. Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> [hdegoede@redhat.com: various cleanups and fixes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded valueAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: omap: Use DIV_ROUND_UP instead of open codedAxel Lin
Also uses NSEC_PER_SEC and USEC_PER_SEC instead of hard-coded value. This makes the intention more clear. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: dw_mmc: Don't print data errorsDoug Anderson
Data errors are completely expected during tuning. Printing them out is confusing people looking at the kernel logs. They see things like: [ 3.613296] dwmmc_exynos 12200000.dwmmc0: data error, status 0x00000088 ...and they think something is wrong with their hardware. Remove the printouts. We'll leave it up to a higher level to report about errors. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: track whether preset mode is currently enabled in hardwareRussell King
Track whether preset mode is currently enabled in hardware, and use that when making decisions elsewhere in the code rather than reading the register and checking the bit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: move remaining power handling into sdhci_set_power()Russell King
Move the remaining parts of the power handling in sdhci_do_set_ios() into sdhci_set_power(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: move regulator handling into sdhci_set_power()Russell King
Move the regulator handling into sdhci_set_power() rather than being in sdhci_do_set_ios(). This wraps all power control up into this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-tegra: get rid of special PRESENT_STATE register handlingRussell King
sdhci-tegra provides a get_ro method, which overrides the checking of the write protect bit in the PRESENT_STATE register in sdhci.c: if (host->flags & SDHCI_DEVICE_DEAD) is_readonly = 0; else if (host->ops->get_ro) is_readonly = host->ops->get_ro(host); else is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_WRITE_PROTECT); This means it's pointless detecting accesses to this register and manually setting the SDHCI_WRITE_PROTECT as it has no effect. This means that the whole of tegra_sdhci_readl() can be removed and we can use the builtin sdhci readl functionality here. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: remove platform_suspend/platform_resume callbacksRussell King
The only user (sdhci-of-esdhc) no longer uses these callbacks, so lets remove them to discourage any further use. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-of-esdhc: remove platform_suspend/platform_resume callbacksRussell King
We don't need these hooks in order to insert code in these paths, we can just provide our own handlers and call the main sdhci handlers as appropriate. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-esdhc-imx: remove emulation of uhs_modeRussell King
We no longer need to emulate the uhs_mode field of the host control2 register - the main sdhci driver never reads this back to evaluate the current mode as it caches the current mode instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: clean up sdhci_execute_tuning() decisionRussell King
Clean up the code in sdhci_execute_tuning() so the decision whether to execute tuning is clearer - and despite this reflecting what the original code was doing, it shows that it may not be what the author actually intended. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: cache timing information locallyRussell King
Rather than reading back the timing information from the registers, cache it locally. This allows implementations to translate the UHS timing by overriding the set_uhs_signaling() method as required without also having to emulate the SDHCI_HOST_CONTROL2 register. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_uhs_signaling() into a library functionRussell King
Add sdhci_set_uhs_signaling() and always call the set_uhs_signaling method. This avoids quirks being added into sdhci_set_uhs_signaling(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: set_uhs_signaling() need not return a valueRussell King
The set_uhs_signaling() method gives the impression that it can fail, but anything returned from the method is entirely ignored by the sdhci driver. So returning failure has no effect. So, kill the idea that it's possible for this to return an error by removing the returned value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-esdhc-imx: fix lockdep splat upon tuningRussell King
================================= [ INFO: inconsistent lock state ] 3.14.0-rc1+ #490 Not tainted --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/u8:0/6 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&host->lock)->rlock#2){?.-...}, at: [<c04b57a4>] esdhc_send_tuning_cmd+0x104/0x14c {IN-HARDIRQ-W} state was registered at: [<c00652fc>] mark_lock+0x15c/0x6f8 [<c0066354>] __lock_acquire+0xabc/0x1ca0 [<c0067ad8>] lock_acquire+0xa0/0x130 [<c0697a44>] _raw_spin_lock+0x34/0x44 [<c04b0dbc>] sdhci_irq+0x20/0xa40 [<c0071b1c>] handle_irq_event_percpu+0x74/0x284 [<c0071d70>] handle_irq_event+0x44/0x64 [<c0074db8>] handle_fasteoi_irq+0xac/0x140 [<c007147c>] generic_handle_irq+0x28/0x38 [<c000efd4>] handle_IRQ+0x40/0x98 [<c0008584>] gic_handle_irq+0x30/0x64 [<c0013144>] __irq_svc+0x44/0x58 [<c0028fc8>] irq_exit+0xc0/0x120 [<c000efd8>] handle_IRQ+0x44/0x98 [<c0008584>] gic_handle_irq+0x30/0x64 [<c0013144>] __irq_svc+0x44/0x58 [<c068f398>] printk+0x3c/0x44 [<c03191d0>] _regulator_get+0x1b4/0x1e0 [<c031924c>] regulator_get+0x18/0x1c [<c049fbc4>] mmc_add_host+0x30/0x1c0 [<c04b2e10>] sdhci_add_host+0x804/0xbbc [<c04b5318>] sdhci_esdhc_imx_probe+0x380/0x674 [<c036d530>] platform_drv_probe+0x20/0x50 [<c036b948>] driver_probe_device+0x120/0x234 [<c036baf8>] __driver_attach+0x9c/0xa0 [<c036a04c>] bus_for_each_dev+0x5c/0x90 [<c036b418>] driver_attach+0x24/0x28 [<c036b018>] bus_add_driver+0xe4/0x1d8 [<c036c1b0>] driver_register+0x80/0xfc [<c036ce28>] __platform_driver_register+0x50/0x64 [<c093706c>] sdhci_esdhc_imx_driver_init+0x18/0x20 [<c0008834>] do_one_initcall+0x3c/0x164 [<c0901c94>] kernel_init_freeable+0x104/0x1d0 [<c068c45c>] kernel_init+0x10/0x118 [<c000e768>] ret_from_fork+0x14/0x2c irq event stamp: 5933 hardirqs last enabled at (5933): [<c069813c>] _raw_spin_unlock_irqrestore+0x38/0x4c hardirqs last disabled at (5932): [<c0697b04>] _raw_spin_lock_irqsave+0x24/0x60 softirqs last enabled at (5914): [<c0028ba0>] __do_softirq+0x260/0x360 softirqs last disabled at (5909): [<c0028fc8>] irq_exit+0xc0/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&host->lock)->rlock#2); <Interrupt> lock(&(&host->lock)->rlock#2); *** DEADLOCK *** 2 locks held by kworker/u8:0/6: #0: (kmmcd){.+.+.+}, at: [<c003d890>] process_one_work+0x134/0x4e8 #1: ((&(&host->detect)->work)){+.+.+.}, at: [<c003d890>] process_one_work+0x134/0x4e8 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 3.14.0-rc1+ #490 Workqueue: kmmcd mmc_rescan Backtrace: [<c00124a0>] (dump_backtrace) from [<c0012640>] (show_stack+0x18/0x1c) [<c0012628>] (show_stack) from [<c069164c>] (dump_stack+0x70/0x8c) [<c06915dc>] (dump_stack) from [<c068f080>] (print_usage_bug+0x274/0x2e4) [<c068ee0c>] (print_usage_bug) from [<c0065774>] (mark_lock+0x5d4/0x6f8) [<c00651a0>] (mark_lock) from [<c0065e6c>] (__lock_acquire+0x5d4/0x1ca0) [<c0065898>] (__lock_acquire) from [<c0067ad8>] (lock_acquire+0xa0/0x130) [<c0067a38>] (lock_acquire) from [<c0697a44>] (_raw_spin_lock+0x34/0x44) [<c0697a10>] (_raw_spin_lock) from [<c04b57a4>] (esdhc_send_tuning_cmd+0x104/0x14c) [<c04b56a0>] (esdhc_send_tuning_cmd) from [<c04b582c>] (esdhc_executing_tuning+0x40/0x100) [<c04b57ec>] (esdhc_executing_tuning) from [<c04afa54>] (sdhci_execute_tuning+0xcc/0x754) [<c04af988>] (sdhci_execute_tuning) from [<c04a4684>] (mmc_sd_init_card+0x65c/0x694) [<c04a4028>] (mmc_sd_init_card) from [<c04a48f0>] (mmc_attach_sd+0xb0/0x184) [<c04a4840>] (mmc_attach_sd) from [<c049eb28>] (mmc_rescan+0x26c/0x2e8) [<c049e8bc>] (mmc_rescan) from [<c003d914>] (process_one_work+0x1b8/0x4e8) [<c003d75c>] (process_one_work) from [<c003e090>] (worker_thread+0x13c/0x3f8) [<c003df54>] (worker_thread) from [<c00449bc>] (kthread+0xcc/0xe8) [<c00448f0>] (kthread) from [<c000e768>] (ret_from_fork+0x14/0x2c) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-esdhc-imx: comment runtime_pm_get_sync() in esdhc_prepare_tuning()Russell King
It is far from obvious what this is doing, and it looks like it's an unbalanced runtime_pm_get() call. However, the put is inside sdhci_tasklet_finish(), so it's not unbalanced at all. This should be documented so people know what's going on here. Do so. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci-esdhc-imx: avoid DMA to kernel stackRussell King
sdhci-esdhc-imx tries to DMA to the kernel stack when tuning the interface, which causes dma-debug to complain. Fix this by kmallocing a buffer to hold the received tuning pattern. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_clock() into a library functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>