summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2019-01-15Merge tag 'gpio-v5.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "The patch hitting the MMC/SD subsystem is fixing up my own mess when moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I managed to reach him on chat and obtain his ACK. The other two are early-rc fixes that are not super serious but pretty annoying so I'd like to get rid of them. Summary: - Get rid of some WARN_ON() from the ACPI code - Staticize a symbol - Fix MMC polarity detection" * tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: mmc: core: don't override the CD GPIO level when "cd-inverted" is set gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts
2019-01-11mmc: core: don't override the CD GPIO level when "cd-inverted" is setMartin Blumenstingl
Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") gpiolib-of parses the "cd-gpios" property and flips the polarity if "cd-inverted" is also set. This results in the "cd-inverted" property being evaluated twice, which effectively makes it a no-op: - first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when setting up the CD GPIO - then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when reading the CD GPIO value at runtime On boards which are using device-tree with the "cd-inverted" property being set any inserted card are not detected anymore. This is due to the MMC core treating the CD GPIO with the wrong polarity. Disable "override_cd_active_level" for the card detection GPIO which is parsed using mmc_of_parse. This fixes SD card detection on the boards which are currently using the "cd-inverted" device-tree property (tested on Meson8b Odroid-C1 and Meson8b EC-100). This does not remove the CD GPIO inversion logic from the MMC core because there's at least one driver (sdhci-pci-core for Intel BayTrail based boards) which still passes "override_cd_active_level = true" to mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left untouched. In the future the GPIO inversion logic for both, card and read-only detection can be removed once no driver is using it anymore. Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Loys Ollivier <loys.ollivier@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-28Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "This time, this pull request contains changes crossing subsystems and archs/platforms, which is mainly because of a bigger modernization of moving from legacy GPIO to GPIO descriptors for MMC (by Linus Walleij). Additionally, once again, I am funneling changes to drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree, mostly due to that we lack a maintainer for these. Summary: MMC core: - Cleanup BKOPS support - Introduce MMC_CAP_SYNC_RUNTIME_PM - slot-gpio: Delete legacy slot GPIO handling MMC host: - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader - bcm2835: Several improvements to better recover from errors - jz4740: Rework and fixup pre|post_req support - mediatek: Add support for SDIO IRQs - meson-gx: Improve clock phase management - meson-gx: Stop descriptor on errors - mmci: Complete the sbc error path by sending a stop command - renesas_sdhi/tmio: Fixup reset/resume operations - renesas_sdhi: Add support for r8a774c0 and R7S9210 - renesas_sdhi: Whitelist R8A77990 SDHI - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W - rtsx_usb_sdmmc: Re-work card detection/removal support - rtsx_usb_sdmmc: Re-work runtime PM support - sdhci: Fix timeout loops for some variant drivers - sdhci: Improve support for error handling due to failing commands - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs - sdhci-of-esdhc: Add support for eMMC HS400 mode - sdhci-omap: Fixup reset support - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200 - sdhci-msm: Fixup dynamical clock gating issues - various: Complete converting all hosts into using slot GPIO descriptors Other: - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors - Add new Alcor Micro cardreader PCI driver - Support runtime power management for memstick rtsx_usb_ms driver - Use USB remote wakeups for card detection for rtsx_usb misc driver" * tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits) mmc: mediatek: Add MMC_CAP_SDIO_IRQ support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support mmc: core: Cleanup BKOPS support mmc: core: Drop redundant check in mmc_send_hpi_cmd() mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) dt-bindings: sdhci-omap: Add note for cpu_thermal mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers mmc: sdhci: Add quirk to disable LED control mmc: mmci: add variant property to set command stop bit misc: alcor_pci: fix spelling mistake "invailid" -> "invalid" mmc: meson-gx: add signal resampling mmc: meson-gx: align default phase on soc vendor tree mmc: meson-gx: remove useless lock mmc: meson-gx: make sure the descriptor is stopped on errors mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65 dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs mmc: sdhci-msm: avoid unused function warning ...
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-19mmc: mediatek: Add MMC_CAP_SDIO_IRQ supportjjian zhou
This patch enables support SDIO IRQs. It enables MMC_CAP_SDIO_IRQ & MMC_CAP2_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq callback. Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0Biju Das
We need r8a774c0 to be whitelisted for SDHI to work on the RZ/G2E, but we don't care about the revision of the SoC, so just whitelist the generic part number. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: core: Cleanup BKOPS supportUlf Hansson
It's been ~6 years ago since we introduced the BKOPS support for eMMC cards. The current code is a bit messy and primarily that's because it prepares to support running BKOPS in an asynchronous mode. However, that mode has never been fully implemented/enabled. Instead BKOPS is always executed in synchronously, when the card has reported an urgent BKOPS level. For these reasons, let's make the code more readable by dropping the unused parts. Let's also rename mmc_start_bkops() to mmc_run_bkops(), as to make it more descriptive. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: core: Drop redundant check in mmc_send_hpi_cmd()Ulf Hansson
There is no point checking if HPI is supported in mmc_send_hpi_cmd() as mmc_interrupt_hpi(), which is the only caller, already checks if HPI has been enabled. Therefore, let's drop the check and the corresponding error path. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17Merge branch 'fixes' into nextUlf Hansson
2018-12-17mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrlUlf Hansson
Some eMMCs from Micron have been reported to need ~800 ms timeout, while enabling the CACHE ctrl after running sudden power failure tests. The needed timeout is greater than what the card specifies as its generic CMD6 timeout, through the EXT_CSD register, hence the problem. Normally we would introduce a card quirk to extend the timeout for these specific Micron cards. However, due to the rather complicated debug process needed to find out the error, let's simply use a minimum timeout of 1600ms, the double of what has been reported, for all cards when enabling CACHE ctrl. Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reported-by: Andreas Dannenberg <dannenberg@ti.com> Reported-by: Faiz Abbas <faiz_abbas@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: core: Allow BKOPS and CACHE ctrl even if no HPI supportUlf Hansson
In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards"), then intent was to prevent HPI from being used for some eMMC cards, which didn't properly support it. However, that went too far, as even BKOPS and CACHE ctrl became prevented. Let's restore those parts and allow BKOPS and CACHE ctrl even if HPI isn't supported. Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards") Cc: Pratibhasagar V <pratibha@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: core: Reset HPI enabled state during re-init and in case of errorsUlf Hansson
During a re-initialization of the eMMC card, we may fail to re-enable HPI. In these cases, that isn't properly reflected in the card->ext_csd.hpi_en bit, as it keeps being set. This may cause following attempts to use HPI, even if's not enabled. Let's fix this! Fixes: eb0d8f135b67 ("mmc: core: support HPI send command") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: omap_hsmmc: fix DMA API warningRussell King
While booting with rootfs on MMC, the following warning is encountered on OMAP4430: omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536] This is because the DMA engine has a default maximum segment size of 64K but HSMMC sets: mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; which ends up telling the block layer that we support a maximum segment size of 65535*512, which exceeds the advertised DMA engine capabilities. Fix this by clamping the maximum segment size to the lower of the maximum request size and of the DMA engine device used for either DMA channel. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: tegra: Fix for SDMMC pads autocal parsing from dtSowjanya Komatineni
Some of the SDMMC pads auto calibration values parsed from devicetree are assigned incorrectly. This patch fixes it. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Fixes: 51b77c8ea784 ("mmc: tegra: Program pad autocal offsets from dt") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci: Fix sdhci_do_enable_v4_modeSowjanya Komatineni
V4_MODE is Bit-15 of SDHCI_HOST_CONTROL2 register. Need to perform word access to this register. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Fixes: b3f80b434f72 ("mmc: sdhci: Add sd host v4 mode") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)Faiz Abbas
Errata i929 in certain OMAP5/DRA7XX/AM57XX silicon revisions (SPRZ426D - November 2014 - Revised February 2018 [1]) mentions unexpected tuning pattern errors. A small failure band may be present in the tuning range which may be missed by the current algorithm. Furthermore, the failure bands vary with temperature leading to different optimum tuning values for different temperatures. As suggested in the related Application Report (SPRACA9B - October 2017 - Revised July 2018 [2]), tuning should be done in two stages. In stage 1, assign the optimum ratio in the maximum pass window for the current temperature. In stage 2, if the chosen value is close to the small failure band, move away from it in the appropriate direction. References: [1] http://www.ti.com/lit/pdf/sprz426 [2] http://www.ti.com/lit/pdf/SPRACA9 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllersAdrian Hunter
Intel BYT-based controllers do not have a LED signal line. Nevertheless sdhci_led_control() takes more than twice as long as sdhci_send_command(), even though it does nothing. Use the new SDHCI_QUIRK_NO_LED quirk to disable LED control for Intel BYT-based controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-pci: Disable LED control for Intel BYT-based controllersAdrian Hunter
Intel BYT-based controllers do not have a LED signal line. Nevertheless sdhci_led_control() takes more than twice as long as sdhci_send_command(), even though it does nothing. Use the new SDHCI_QUIRK_NO_LED quirk to disable LED control for Intel BYT-based controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci: Add quirk to disable LED controlAdrian Hunter
Host controllers may not have a LED signal line, whereas the register updates to control the non-existent LED can be relatively time consuming. Add a quirk to disable LED control. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: mmci: add variant property to set command stop bitLudovic Barre
On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set cmdstop bit in command register. The CPSM ("Command Path State Machine") treats the command as a Stop Transmission command and signals abort to the DPSM ("Data Path State Machine"). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: meson-gx: add signal resamplingJerome Brunet
With some eMMC devices, there is still issues with the new phase settings. Enabling signal resampling seems to solve the problem for these. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: meson-gx: align default phase on soc vendor treeJerome Brunet
Align the default Core and Tx phase with the SoC vendor tree. Even if the Tx phase is different from what the documentation recommends, it seems to provide better results. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: meson-gx: remove useless lockJerome Brunet
The spinlock is only used within the irq handler so it does not seem very useful. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: meson-gx: make sure the descriptor is stopped on errorsJerome Brunet
On errors, if we don't stop the descriptor chain, it may continue to run and raise IRQ after we have called mmc_request_done(). This is bad because we won't be able to get cmd anymore and properly deal with the IRQ. This patch makes sure the descriptor chain is stopped before calling mmc_request_done() Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driverFaiz Abbas
The host controllers on TI's AM654 SOCs are not compatible with the phy and consumer model of the sdhci-of-arasan driver. It turns out that for optimal operation at higher speeds, a special tuning procedure needs to be implemented which involves configuration of platform specific phy registers. Therefore, branch out to a new sdhci_am654 driver and add the phy register space with all phy configurations to it. Populate AM654 specific callbacks to sdhci_ops and add SDHCI_QUIRKS wherever applicable. Only add support for upto High Speed for SD card and upto DDR52 speed mode for eMMC. Higher speeds will be added in subsequent patches. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-msm: avoid unused function warningArnd Bergmann
The newly added sdhci_msm_restore_sdr_dll_config() function is only called if CONFIG_PM is enabled: drivers/mmc/host/sdhci-msm.c:1050:12: error: 'sdhci_msm_restore_sdr_dll_config' defined but not used [-Werror=unused-function] Better remove the incorrect #ifdef altogether and just use __maybe_unused, which is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-xenon: Fix timeout checksAdrian Hunter
Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-omap: Fix timeout checksAdrian Hunter
Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-of-esdhc: Fix timeout checksAdrian Hunter
Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: alcor: remove set but not used variables 'len, clock_out'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mmc/host/alcor.c: In function 'alcor_data_set_dma': drivers/mmc/host/alcor.c:124:12: warning: variable 'len' set but not used [-Wunused-but-set-variable] drivers/mmc/host/alcor.c:648:15: warning: variable 'clock_out' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-of-esdhc: fix spelling mistake "upsupported" -> "unsupported"Colin Ian King
There is a spelling mistake in a pr_warn message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: rtsx_usb_sdmmc: Re-work card detection/removal supportUlf Hansson
The rtsx USB parent device, has logic to detect when a card is inserted into the card slot. Although, the logic can't detect when a card is removed. This makes things a bit tricky, which is why the current method is simply to turn on MMC_CAP_NEEDS_POLL during probe. Using MMC_CAP_NEEDS_POLL means lots of energy being wasted, as the mmc host becomes runtime resumed frequently by the mmc core, while it polls for new cards being inserted. To address this problem, let's start relying on that the rtsx USB driver runtime resumes its child device, which is the rtsx_usb_sdmmc device, when it detects that a new card being inserted. This means dropping MMC_CAP_NEEDS_POLL from being set during probe. Instead let's implement a ->runtime_resume() callback to schedule a detect work and to set MMC_CAP_NEEDS_POLL. In this way, polling is enabled as long as there is card inserted, thus we can rely on the mmc core to detect also when the card becomes removed. Furthermore, to avoid polling forever after a card has been removed, let's implement a ->runtime_suspend() callback and make it clear MMC_CAP_NEEDS_POLL. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
2018-12-17mmc: rtsx_usb_sdmmc: Re-work runtime PM supportUlf Hansson
The current implementation uses the runtime PM autosuspend feature with a default timeout set to 50ms. This really doesn't makes sense, as it's a USB driven host device, which needs it rtsx USB device (parent device) to be runtime resumed to provide power to the card. In practise, using the autosuspend or any async runtime PM suspend method, means unnecessary delaying the host device and thus the parent, to be runtime suspended when a card is removed/powered off. For this reasons, let's simply drop the support for runtime PM autosuspend and tell the mmc core to use synced runtime PM suspend methods, via setting MMC_CAP_SYNC_RUNTIME_PM during probe. Moreover, as the mmc core nowadays deploys runtime PM reference counting of the mmc host device, convert ->set_ios() to use the more lightweight pm_runtime_get_noresume() and pm_runtime_put_noidle() APIs. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
2018-12-17mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing ledUlf Hansson
In case the card has been powered off, it seems silly to continue to allow the led to be updated. Instead let's forbid that, as it enables us to prevent runtime resuming the device and thus avoids wasting energy. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
2018-12-17mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PMUlf Hansson
To allow mmc host drivers to inform the mmc core about rather using pm_runtime_put_sync_suspend() instead of pm_runtime_put_autosuspend(), let's introduce MMC_CAP_SYNC_RUNTIME_PM. This is especially useful for those mmc host drivers that don't benefit from using the runtime PM autosuspend feature. Typically this is those that relies on parent devices to power the card via runtime PM, like some USB host drivers for example. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
2018-12-17mmc: sdhci-msm: Disable CDR function on TXLoic Poulain
The Clock Data Recovery (CDR) circuit allows to automatically adjust the RX sampling-point/phase for high frequency cards (SDR104, HS200...). CDR is automatically enabled during DLL configuration. However, according to the APQ8016 reference manual, this function must be disabled during TX and tuning phase in order to prevent any interferences during tuning challenges and unexpected phase alteration during TX transfers. This patch enables/disables CDR according to the current transfer mode. This fixes sporadic write transfer issues observed with some SDR104 and HS200 cards. Inspired by sdhci-msm downstream patch: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/ Reported-by: Leonid Segal <leonid.s@variscite.com> Reported-by: Manabu Igusa <migusa@arrowjapan.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: add new Alcor Micro Cardreader SD/MMC driverOleksij Rempel
This driver provides support for Alcor Micro AU6601 and AU6621 SD/MMC controller. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: jz4740: Use PTR_ERR_OR_ZERO in jz4740_mmc_request_gpios()YueHaibing
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Joey Pabalinas <joeypabalinas@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-pci: Add max-frequency device property for Intel controllersAdrian Hunter
Add support for the mmc max-frequency device property for Intel BYT-based host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: slot-gpio: Delete legacy GPIO handlingLinus Walleij
All host drivers are converted to look up GPIO descriptors from device tree, ACPI or machine descriptor tables, so now we can delete the legacy GPIO handling using hardcoded GPIO numbers from the kernel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: pxa: Use GPIO descriptor for powerLinus Walleij
After converting the PXA driver to use GPIO descriptors for card detect and write protect it is relatively simple to convert it to also use a descriptor for getting the optional power control GPIO. The polarity inversion flag can also go away from the platform data since this is indicated in the GPIO machine descriptor table. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: pxamci: Delete platform data handling of CD and WPLinus Walleij
This deletes the code dealing with handling card detect and write protect passed in as platform data and makes the host rely on just GPIO descriptors. The card read only inversion flag has to be kept around for now, as the core cannot handle the inversion flags on the descriptors yet. Since we can now rely on the descriptors to have the right polarity, we set the "override_active_level" to false in mmc_gpiod_request_cd() and mmc_gpiod_request_ro(). Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: pxamci: Support getting GPIO descs for RO and WPLinus Walleij
This implements the code path for the PXAMCI hostso that it can retrieve GPIO descriptors rather than use the global GPIO numberspace for GPIO lines. If the GPIO descriptor is present, it will take precedence and get used in place of the platform data GPIO number. We move the code around a bit so we request the card detect first and the write protect second. We keep the code setting the host flag for the write protect polarity inversion semantics since the slot GPIO core needs to be refactored to deal with this before we can get rid of this. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: s3cmci: Use the slot GPIO descriptorLinus Walleij
Simplify things by making the S3CMCI driver just use slot GPIO with descriptors instead of passing around the global GPIO numbers that we want to get rid of. Getting the names of the GPIO chips into the machine descriptor tables was a bit of a challenge but I think I have them right. The platform data supports passing in inversion flags, but no platform is using them, and it is highly unlikely that we will add more, so drop them. The long term plan is to let the inversion flags on the GPIO machine descriptor do the job. The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is what they are, and since we can now rely on the descriptors to have the right polarity, we set the "override_active_level" to false in mmc_gpiod_request_cd() and mmc_gpiod_request_ro(). Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: host: tmio: Use GPIO descriptorsLinus Walleij
The TMIO MMC driver was passing global GPIO numbers around for card detect. It turns out only one single board in the kernel was actually making use of this feature so it is pretty easy to convert the driver to use only GPIO descriptors. The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is what they are, and since we can now rely on the descriptors to have the right polarity, we set the "override_active_level" to false in mmc_gpiod_request_cd() and mmc_gpiod_request_ro(). Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: spi: Convert to use GPIO descriptorsLinus Walleij
Switch the SPI MMC driver to use GPIO descriptors internally and just look those up using the standard slot GPIO functions mmc_gpiod_request_cd() and mmc_gpiod_request_ro(). Make sure to request index 0 and 1 in accordance with the SPI MMC DT binding, and add the same GPIOs in machine descriptor tables on all boards that use SPI MMC in board files. The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is what they are, and since we can now rely on the descriptors to have the right polarity, we set the "override_active_level" to false in mmc_gpiod_request_cd() and mmc_gpiod_request_ro(). Cc: Hartley Sweeten <hsweeten@visionengravers.com> # Vision EP9307 Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: meson-mx-sdio: check devm_kasprintf for failureNicholas Mc Guire
devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_mx_mmc_register_clks() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-of-esdhc: workaround for unreliable pulse width detectionYangbo Lu
This was a SoC issue on LX2160A Rev1.0. eSDHC_DLLCFG1[DLL_PD_PULSE_STRETCH_SEL] must be set to 0 to get 4 delay cells in the pulse width detection logic for eMMC HS400 mode. Otherwise it would cause unexpected HS400 issue. This patch is to clear this bit always for affected SoC when reset for all, since this bit doesn't affect other speed modes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>