summaryrefslogtreecommitdiff
path: root/drivers/mtd/maps
AgeCommit message (Collapse)Author
2021-10-15mtd: fixup CFI on ixp4xxArnd Bergmann
drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set in order to compile. drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required This patch avoids the #error output by enforcing the policy in Kconfig. Not sure if this is the right approach, but it helps doing randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
2021-08-17mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boardsLukas Bulwahn
Commit 1b00767fd8e1 ("MIPS: Remove PMC MSP71xx platform") removes the config PMC_MSP in ./arch/mips/Kconfig. Hence, since then, the corresponding MTD map driver for PMC-Sierra MSP boards is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210817104531.12675-1-lukas.bulwahn@gmail.com
2021-06-11mtd: amd76xrom: remove unnecessary oom messageZhen Lei
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022631.15344-1-thunder.leizhen@huawei.com
2021-06-11mtd: ck804xrom: remove unnecessary oom messageZhen Lei
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022416.15291-1-thunder.leizhen@huawei.com
2021-06-11mtd: esb2rom: remove unnecessary oom messageZhen Lei
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022239.15238-1-thunder.leizhen@huawei.com
2021-06-11mtd: ichxrom: remove unnecessary oom messageZhen Lei
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022100.15185-1-thunder.leizhen@huawei.com
2021-06-11mtd: sun_uflash: remove unnecessary oom messageZhen Lei
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610021400.15132-1-thunder.leizhen@huawei.com
2021-05-10mtd: plat-ram: remove redundant dev_err call in platram_probe()Yu Kuai
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210408111514.1011020-3-yukuai3@huawei.com
2021-04-26Merge tag 'mtd/for-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core: - Handle possible -EPROBE_DEFER from parse_mtd_partitions() - Constify buf in mtd_write_user_prot_reg() - Constify name param in mtd_bdi_init - Fix fall-through warnings for Clang - Get rid of Big MTD Lock ouf of mtdchar - Drop mtd_mutex usage from mtdchar_open() - Don't lock when recursively deleting partitions - Use module_mtd_blktrans() to register driver when relevant - Parse MTD as NVMEM cells - New OTP (one-time-programmable) erase ioctl - Require write permissions for locking and badblock ioctls - physmap: - Fix error return code of physmap_flash_remove() - physmap-bt1-rom: Fix unintentional stack access - ofpart parser: - Support Linksys Northstar partitions - Make symbol 'bcm4908_partitions_quirks' static - Limit parsing of deprecated DT syntax - Support BCM4908 fixed partitions - Qcom parser: - Incompatible with spi-nor 4k sectors - Fix error condition - Extend Qcom SMEM parser to SPI flash CFI: - Disable broken buffered writes for CFI chips within ID 0x2201 - Address a Coverity report for unused value SPI NOR core: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches - Add Michael and Pratyush as designated reviewers in MAINTAINERS SPI NOR controller drivers: - intel-spi: - Move platform data header to x86 subfolder NAND core: - Fix error handling in nand_prog_page_op() (x2) - Add a helper to retrieve the number of ECC bytes per step - Add a helper to retrieve the number of ECC steps - Let ECC engines advertize the exact number of steps - ECC Hamming: - Populate the public nsteps field - Use the public nsteps field - ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: - Add support for secure regions in NAND memory - Try not to use the ECC private structures - Remove duplicate include in rawnand.h - BBT: - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED) Raw NAND controller drivers: - Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset - GPMI: - Fix a double free in gpmi_nand_init - Rockchip: - Use flexible-array member instead of zero-length array - Atmel: - Update ecc_stats.corrected counter - MXC: - Remove unneeded of_match_ptr() - R852: - replace spin_lock_irqsave by spin_lock in hard IRQ - Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC - FSMC: - Fix error code in fsmc_nand_probe() - OMAP: - Use ECC information from the generic structures SPI-NAND core: - Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: - gigadevice: Support GD5F1GQ5UExxG" * tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits) Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND" mtd: core: Constify buf in mtd_write_user_prot_reg() Revert "mtd: spi-nor: macronix: Add support for mx25l51245g" mtd: spi-nor: core: Fix an issue of releasing resources during read/write mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201 mtd: rawnand: qcom: Use dma_mapping_error() for error check mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init mtd: rawnand: qcom: Add missing nand_cleanup() in error path mtd: rawnand: Add support for secure regions in NAND memory dt-bindings: mtd: Add a property to declare secure regions in NAND chips dt-bindings: mtd: Convert Qcom NANDc binding to YAML mtd: spi-nor: winbond: add OTP support to w25q32fw/jw mtd: spi-nor: implement OTP support for Winbond and similar flashes mtd: spi-nor: add OTP support mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr() mtd: spi-nor: Move Software Write Protection logic out of the core mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND include: linux: mtd: Remove duplicate include of nand.h mtd: parsers: ofpart: support Linksys Northstar partitions ...
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-11mtd: maps: fix error return code of physmap_flash_remove()Jia-Ju Bai
When platform_get_drvdata() returns NULL to info, no error return code of physmap_flash_remove() is assigned. To fix this bug, err is assigned with -EINVAL in this case Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com
2021-03-11mtd: physmap: physmap-bt1-rom: Fix unintentional stack accessGustavo A. R. Silva
Cast &data to (char *) in order to avoid unintentionally accessing the stack. Notice that data is of type u32, so any increment to &data will be in the order of 4-byte chunks, and this piece of code is actually intended to be a byte offset. Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support") Addresses-Coverity-ID: 1497765 ("Out-of-bounds access") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210212104022.GA242669@embeddedor
2021-02-01mtd: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210108092300.18909-1-zhengyongjun3@huawei.com
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-10mtd: plat-ram: correctly free memory on error path in platram_probe()Baskov Evgeiny
If an error happens in mtd_device_parse_register or mtd_device_register, memory allocated for struct platram_info is leaked. Make platram_probe() call platram_remove() on all error paths after struct platram_info allocation to correctly free resources. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Baskov Evgeiny <baskov@ispras.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201113160537.899-1-baskov@ispras.ru
2020-12-07mtd: physmap: physmap-bt1-rom: Fix __iomem addrspace removal warningSerge Semin
sparse is unhappy with us casting the __iomem address space pointer to a type with no address space attribute specified: "sparse warnings: (new ones prefixed by >>)" >> drivers/mtd/maps/physmap-bt1-rom.c:78:18: sparse: sparse: cast removes address space '__iomem' of expression Indeed we perform the __iomem-less type casting but to an integer variable. The integer variable isn't dereferenced then, so the casting is safe and won't cause any problem. But in order to make sparse happy and keep the code coherent let's fix the warning by converting the local "shift" and "chunk" variables to the "unsigned int" type (since their value won't ever exceed three) and cast the __iomem-pointers to uintptr_t. Add the same fix to the bt1_rom_map_read() method for unification. Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support") Link: https://lore.kernel.org/lkml/202011021254.XC70BaQT-lkp@intel.com/ Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reported-by: kernel test robot <lkp@intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201125072640.23516-1-Sergey.Semin@baikalelectronics.ru
2020-10-02mtd: maps: vmu-flash: fix typos for struct memcardBernard Zhao
Change struct memcard`s element "removeable" -> "removable". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200922112814.26761-1-bernard@vivo.com
2020-10-02mtd: physmap: Add Baikal-T1 physically mapped ROM supportSerge Semin
Baikal-T1 Boot Controller provides an access to a RO storages, which are physically mapped into the SoC MMIO space. In particularly there are Internal ROM embedded into the SoC with a pre-installed firmware, externally attached SPI flash (also accessed in the read-only mode) and a memory region, which mirrors one of them in accordance with the currently enabled system boot mode (also called Boot ROM). This commit adds the Internal ROM support to the physmap driver of the MTD kernel subsystem. The driver will create the Internal ROM MTD as long as it is defined in the system dts file. The physically mapped SPI flash region will be used to implement the SPI-mem interface. The mirroring memory region won't be accessible directly since it's redundant due to both bootable regions being exposed anyway. Note we had to create a dedicated code for the ROMs since read from the corresponding memory regions must be done via the dword-aligned addresses. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru
2020-10-02mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmuLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200919100854.1639267-1-liushixin2@huawei.com
2020-08-27mtd: maps: physmap: Retain mtd-name property from dtsChris Packham
In physmap_flash_of_init() the maps[].name can be populated based on the optional 'linux,mtd-name' property in the dts. Make sure this is retained when filling in the rest of the map[] data. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200824025744.25992-1-chris.packham@alliedtelesis.co.nz
2020-08-02mtd: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-05mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'Jason Yan
It's not used by anyone now, remove it. Fix the following gcc warning: drivers/mtd/maps/physmap-gemini.c:49:34: warning: ‘syscon_match’ defined but not used [-Wunused-const-variable=] static const struct of_device_id syscon_match[] = { ^~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-03-30mtd: Convert fallthrough comments into statementsMiquel Raynal
Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
2020-03-24mtd: maps: sa1100-flash: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200319224200.GA25162@embeddedor.com
2020-01-30Merge tag 'mtd/for-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ...
2020-01-27mtd: maps: physmap: Add minimal Runtime PM supportGeert Uytterhoeven
Add minimal runtime PM support (enable on probe, disable on remove), to ensure proper operation with a parent device that uses runtime PM. This is needed on systems where the FLASH is connected to a bus controller that is contained in a PM domain and/or has a gateable functional clock. In such cases, before accessing any device connected to the external bus, the PM domain must be powered up, and/or the functional clock must be enabled, which is typically handled through runtime PM by the bus controller driver. An example of this is the Renesas APE6-EVM development board, which has an Ethernet controller and a CFI FLASH connected to the Bus State Controller (BSC) of an R-Mobile APE6 SoC. As long as the Ethernet driver, which had Runtime PM support since commit 3a611e26e958b037 ("net/smsc911x: Add minimal runtime PM support"), keeps the BSC powered, accessing the FLASH works. When the ethernet node in r8a73a4-ape6evm.dts is disabled, the BSC is never powered up, and the kernel crashes when trying to access the FLASH: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=7fef2835 Internal error: : 1406 [#1] SMP ARM CPU: 0 PID: 122 Comm: hd Tainted: G W 5.5.0-rc1-ape6evm-00814-g38ca966db25b9dbd-dirty #136 Hardware name: Generic R8A73A4 (Flattened Device Tree) PC is at chip_ready+0x12c/0x380 LR is at chip_ready+0x10c/0x380 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-27mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in ↵Jia-Ju Bai
pcmciamtd_set_vpp() The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/pcmcia/pcmcia_resource.c, 312: mutex_lock in pcmcia_fixup_vpp drivers/mtd/maps/pcmciamtd.c, 309: pcmcia_fixup_vpp in pcmciamtd_set_vpp drivers/mtd/maps/pcmciamtd.c, 306: _raw_spin_lock_irqsave in pcmciamtd_set_vpp drivers/pcmcia/pcmcia_resource.c, 312: mutex_lock in pcmcia_fixup_vpp drivers/mtd/maps/pcmciamtd.c, 312: pcmcia_fixup_vpp in pcmciamtd_set_vpp drivers/mtd/maps/pcmciamtd.c, 306: _raw_spin_lock_irqsave in pcmciamtd_set_vp mutex_lock() may sleep at runtime. To fix these bugs, the spinlock is replaced with a mutex. These bugs are found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-29mtd: physmap_of: add a hook for Intel IXP4xx flash probingLinus Walleij
In order to support device tree probing of IXP4xx NOR flash chips, a certain big-endian or mixed-endian memory access pattern need to be used. I have opted to use the pattern set by previous plug-ins to physmap for Gemini and Versatile, just override some functions and reuse most of the physmap core code as it is to minimize maintenance. Parts of drivers/mtd/ixp4xx.c are copied into this file. After we have IXP4xx converted fully to device tree, the drivers/mtd/ixp4xx.c file will be deleted and this will be the only access pattern to the IXP4xx flash. I did not keep the quirk in the flash write function after probe, where the old code for a while checks for access to odd addresses, fails and assigns a "faster" write function once it has convinced probe to only use 2-byte accesses. As we mandate that this device should be using bank-width = <2> this should not be a problem unless misconfigured. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: maps: l440gx: Avoid printing address to dmesgFuqian Huang
Avoid printing the address of l440gx_map.virt every time l440gx init. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-09-15mtd: pismo: Simplify getting the adapter of a clientWolfram Sang
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: pxa2xx: Use ioremap_cache insted of ioremap_cachedChristoph Hellwig
pxa2xx-flash is the only user of ioremap_cached, which is an alias for ioremap_cache anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-20mtd: sa1100: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: assabet_defconfig arm): drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’: drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_WARNING "SA1100 flash: unknown base address " ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "0x%08lx, assuming CS0\n", phys); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/maps/sa1100-flash.c:85:2: note: here case SA1100_CS0_PHYS: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 467Thomas Gleixner
Based on 1 normalized pattern(s): licensed under version 2 of the gnu general public licence extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.750147367@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-06mtd: maps: Make uclinux_ram_map staticThomas Huth
The blackfin architecture has been removed a while ago, so there is no more need to declare uclinux_ram_map as a global structure. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06mtd: maps: Allow MTD_PHYSMAP with MTD_RAMChris Packham
When the physmap_of_core.c code was merged into physmap-core.c the ability to use MTD_PHYSMAP_OF with only MTD_RAM selected was lost. Restore this by adding MTD_RAM to the dependencies of MTD_PHYSMAP. Fixes: commit 642b1e8dbed7 ("mtd: maps: Merge physmap_of.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06mtd: maps: physmap: Store gpio_values correctlyChris Packham
When the gpio-addr-flash.c driver was merged with physmap-core.c the code to store the current gpio_values was lost. This meant that once a gpio was asserted it was never de-asserted. Fix this by storing the current offset in gpio_values like the old driver used to. Fixes: commit ba32ce95cbd9 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06mtd: physmap_of_gemini: remove extranous __xipram annotationArnd Bergmann
Marking a local variable as __xipram causes a warning because of the noinline attribute: drivers/mtd/maps/physmap-gemini.c:89:11: error: '__noinline__' attribute only applies to functions [-Werror,-Wignored-attributes] map_word __xipram ret; ^ include/linux/mtd/xip.h:34:18: note: expanded from macro '__xipram' #define __xipram noinline __attribute__ ((__section__ (".xiptext"))) I can't see any reason for the anotation anyway, so just remove it here. Fixes: 9d3b5086f6d4 ("mtd: physmap_of_gemini: Handle pin control") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-12-29Merge tag 'kbuild-v4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-18Merge tag 'nand/for-4.21' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
NAND core changes: - kernel-doc miscellaneous fixes. - Third batch of fixes/cleanup to the raw NAND core impacting various controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610): * Stopping to pass mtd_info objects to internal functions * Reorganizing code to avoid forward declarations * Dropping useless test in nand_legacy_set_defaults() * Moving nand_exec_op() to internal.h * Adding nand_[de]select_target() helpers * Passing the CS line to be selected in struct nand_operation * Making ->select_chip() optional when ->exec_op() is implemented * Deprecating the ->select_chip() hook * Moving the ->exec_op() method to nand_controller_ops * Moving ->setup_data_interface() to nand_controller_ops * Deprecating the dummy_controller field * Fixing JEDEC detection * Providing a helper for polling GPIO R/B pin Raw NAND chip drivers changes: - Macronix: * Flagging 1.8V AC chips with a broken GET_FEATURES(TIMINGS) Raw NAND controllers drivers changes: - Ams-delta: * Fixing the error path * SPDX tag added * May be compiled with COMPILE_TEST=y * Conversion to ->exec_op() interface * Dropping .IOADDR_R/W use * Use GPIO API for data I/O - Denali: * Removing denali_reset_banks() * Removing ->dev_ready() hook * Including <linux/bits.h> instead of <linux/bitops.h> * Changes to comply with the above fixes/cleanup done in the core. - FSMC: * Adding an SPDX tag to replace the license text * Making conversion from chip to fsmc consistent * Fixing unchecked return value in fsmc_read_page_hwecc * Changes to comply with the above fixes/cleanup done in the core. - Marvell: * Preventing timeouts on a loaded machine (fix) * Changes to comply with the above fixes/cleanup done in the core. - OMAP2: * Pass the parent of pdev to dma_request_chan() (fix) - R852: * Use generic DMA API - sh_flctl: * Converting to SPDX identifiers - Sunxi: * Write pageprog related opcodes to the right register: WCMD_SET (fix) - Tegra: * Stop implementing ->select_chip() - VF610: * Adding an SPDX tag to replace the license text * Changes to comply with the above fixes/cleanup done in the core. - Various trivial/spelling/coding style fixes. SPI-NAND drivers changes: - Removing the depreacated mt29f_spinand driver from staging. - Adding support for: * Toshiba TC58CVG2S0H * GigaDevice GD5FxGQ4xA * Winbond W25N01GV
2018-12-06mtd: physmap_of_gemini: Handle pin controlLinus Walleij
This enables the complex mapping for the Gemini and kicks in custom read/write functions that will wrap the existing simple functions in calls to enable/disable the parallel flash pins using pin controls. This is necessary on some hardware such as the D-Link DIR-685 where all flash pins are patched in/out at the same time, but some of the flash pins are in practice unused by the flash and have anyway been reused as GPIO. This concerns specifically CE1 on the Gemini. There is only one flash chip, so only CE0 is used, and the line for CE1 has been reused as chip select for the emulated SPI port connected to the display. If we try to use the same lines for flash and GPIO at the same time, one of them will loose: the GPIO line will disappear because it gets disconnected from the pin when the flash group is muxed out. Fix this by introducing two pin control states named simply "enabled" and "disabled" and only enable the flash lines when absolutely necessary (during read/write/copy). This way, they are available for GPIO at all other times and the display works. Collect all the state variables in a struct named struct gemini_flash and allocate this struct at probe time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-12-06mtd: maps: physmap: Leave assigned complex mappingsLinus Walleij
SoC-specific drivers might provide their own map->xxx() implementations, and calling simple_map_init() unconditionally will override those implementations. Make sure map->read is NULL before calling simple_map_init(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-12-01kbuild: announce removal of SUBDIRS if usedMasahiro Yamada
SUBDIRS has been kept as a backward compatibility since commit ("[PATCH] kbuild: external module support") in 2002. We do not need multiple ways to do the same thing, so I will remove SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and updated the document so that nobody would try to use it. Meanwhile, display the following warning if SUBDIRS is used. Makefile:189: ================= WARNING ================ Makefile:190: 'SUBDIRS' will be removed after Linux 5.3 Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead Makefile:192: ========================================== Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
2018-11-06mtd: maps: Get rid of the latch-addr-flash driverBoris Brezillon
Looks like this driver was initially added to support the NOR on the DA830-EVM (Davinci) board, but the board file update was never merged. Keeping unused drivers just adds to the maintenance burden, so let's remove it if nobody uses it. Cc: David Griego <dgriego@mvista.com> Cc: Aleksey Makarov <amakarov@ru.mvista.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Savinay Dharmappa <savinay.dharmappa@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Sekhar Nori <nsekhar@ti.com>
generated by cgit (git 2.34.1) at 2024-05-27 07:36:02 +0000