summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2018-04-04Merge tag 'spi-nor/for-4.17' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
* Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver
2018-03-30mtd: fsl-quadspi: Distinguish the mtd device namesFabio Estevam
Currently on a imx6sx-sdb board, which has two SPI NOR chips connected to QSPI2 the following output from /proc/mtd is seen: dev: size erasesize name mtd0: 01000000 00010000 "21e4000.qspi" mtd1: 01000000 00010000 "21e4000.qspi" Attempts to partition them on the kernel command line result in both chips with identical (and identically named) partitions, which is an inconvenient behavior. Assign a different mtd->name for each mtd device to avoid this problem. After this change the output from /proc/mtd becomes: dev: size erasesize name mtd0: 01000000 00010000 "21e4000.qspi-0" mtd1: 01000000 00010000 "21e4000.qspi-1" In order to keep mtdparts compatibility keep the mtd->name unchanged when a single SPI NOR is present. Reported-by: David Wolfe <david.wolfe@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: fsl-quadspi: Remove unneeded driver.bus assignmentBoris Brezillon
platform_driver_register() takes care of assigning driver->bus to &platform_bus_type, no need to explicitly assign it in the driver. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-03-29mtd: ftl: Use DIV_ROUND_UP()Arushi Singhal
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: Fix some function description mismatches in mtdcore.cXiaolei Li
In mtdcore.c, some function descriptions do not match function definitions. Just fix these mismatches. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: physmap_of: update struct map_info's swap as per map requirementPrabhakar Kushwaha
It is not necessary for all device's maps to be CFI_HOST_ENDIAN. Maps device can be Big endian or little endian. Currently it is being taken care using CONFIG_MTD_CFI_LE_BYTE_SWAP or CONFIG_MTD_CFI_BE_BYTE_SWAP i.e. compile time. Now update struct map_info's swap field based on device characteristics defined in device tree. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: update documentation of mtd_device_parse_register()Rafał Miłecki
In the commit 2c77c57d22adb ("mtd: move code adding master MTD out of mtd_add_device_partitions()") behavior of mtd_device_parse_register() has very slightly changed. It's a pretty non-significant order change to match updated function behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: jedec_probe: add Eon EN29LV400A IDsLinus Walleij
This adds the JEDEC IDs for Eon EN29LV400A variants EN29LV400AB and EN29LV400AT. This chip is found in the D-Link DNS-313. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: ofpart: add of_match_table with "fixed-partitions"Rafał Miłecki
This allows using this parser with any flash driver that takes care of setting of_node (using mtd_set_of_node helper) correctly. Up to now support for "fixed-partitions" DT compatibility string was working only with flash drivers that were specifying "ofpart" (manually or by letting mtd use the default set of parsers). This matches existing bindings documentation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: rename "ofpart" parser to "fixed-partitions" as it fits it betterRafał Miłecki
Type "ofpart" means that OF should be used to get partitioning info and this driver supports "fixed-partitions" binding only. Renaming it should lead to less confusion especially when parsers for new compatibility strings start to appear. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: partitions: add of_match_table parser matching for the "ofpart" typeRafał Miłecki
In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: maps: remove bfin-async-flash driverArnd Bergmann
The blackfin architecture is getting removed, so this driver has become obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: tests: check erase block count in page testStefan Agner
When there is only a single erase block, the cross erase test does not report sensible errors. Warn in case there is only a single erase block instead of executing the test. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nftl: use %*ph to print small bufferAntonio Cardace
Use %*ph format to print small buffer as hex string. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-15mtd: Unconditionally update ->fail_addr and ->addr in part_erase()Boris Brezillon
->fail_addr and ->addr can be updated no matter the result of parent->_erase(), we just need to remove the code doing the same thing in mtd_erase_callback() to avoid adjusting those fields twice. Note that this can be done because all MTD users have been converted to not pass an erase_info->callback() and are thus only taking the ->addr_fail and ->addr fields into account after part_erase() has returned. While we're at it, get rid of the erase_info->mtd field which was only needed to let mtd_erase_callback() get the partition device back. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Initialize ->fail_addr early in mtd_erase()Boris Brezillon
mtd_erase() can return an error before ->fail_addr is initialized to MTD_FAIL_ADDR_UNKNOWN. Move this initialization at the very beginning of the function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: st_spi_fsm: use %*ph to print small bufferAntonio Cardace
Use %*ph format to print small buffer as hex string. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-15mtd: block2mtd: remove redundant initialization of 'bdev'Colin Ian King
Pointer bdev is being initialized however this value is never read as bdev is assigned an updated value from the returned call to blkdev_get_by_path. Remove the redundant assignment. Cleans up clang warning: drivers/mtd/devices/block2mtd.c:228:23: warning: Value stored to 'bdev' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-12mtd: get rid of the mtd_add_device_partitions()Rafał Miłecki
This simplifies code a bit by: 1) Avoiding an extra (tiny) function 2) Checking for amount of parsed (found) partitions just once 3) Avoiding clearing/filling struct mtd_partitions manually With this commit proper functions are called directly from the mtd_device_parse_register(). It doesn't need to use minor tricks like memsetting struct to 0 to trigger an expected mtd_add_device_partitions() behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-12mtd: move code adding master MTD out of mtd_add_device_partitions()Rafał Miłecki
This change is a small cleanup of mtd_device_parse_register(). When using MTD_PARTITIONED_MASTER it makes sure a master MTD is registered before dealing with partitions. The advantage of this is not mixing code handling master MTD with code handling partitions. This commit doesn't change any behavior except from a slightly different failure code path. The new code may need to call del_mtd_device when something goes wrong. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-12mtd: Make sure the device supports erase operations in mtd_erase()Boris Brezillon
Some devices do not implement ->_erase() or have an invalid ->erasesize value. In this case, mtd_erase() should return -ENOTSUPP. Note that the test is not done on the MTD_NO_ERASE flag because this flag means 'erasing a block before writing to it is unnecessary', not 'the erase operation is not supported'. Actually, some drivers are setting the MTD_NO_ERASE flag but still implementing the ->_erase() hook and setting a valid ->erasesize value. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-29Merge tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS updates from Richard Weinberger: - use the new fscrypt APIs - a fix for a Fastmap issue - other minor bug fixes * tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifs: ubi: block: Fix locking for idr_alloc/idr_remove mtd: ubi: wl: Fix error return code in ubi_wl_init() ubi: Fix copy/paste error in function documentation ubi: Fastmap: Fix typo ubifs: remove error message in ubifs_xattr_get ubi: fastmap: Erase outdated anchor PEBs during attach ubifs: switch to fscrypt_prepare_setattr() ubifs: switch to fscrypt_prepare_lookup() ubifs: switch to fscrypt_prepare_rename() ubifs: switch to fscrypt_prepare_link() ubifs: switch to fscrypt_file_open() ubi: fastmap: Clean up the initialization of pointer p ubi: fastmap: Use kmem_cache_free to deallocate memory ubi: Fix race condition between ubi volume creation and udev mtd: ubi: Use 'max_bad_blocks' to compute bad_peb_limit if available ubifs: Fix uninitialized variable in search_dh_cookie()
2018-01-29Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Boris Brezillon: "MTD core changes: - Rework core functions to avoid duplicating generic checks in NAND/OneNAND sub-layers - Update the MAINTAINERS entry to reflect the fact that MTD maintainers now use a single git tree MTD driver changes: - CFI: use macros instead of inline functions to limit stack usage and make KASAN happy NAND core changes: - Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks - Introduce the ->exec_op() infrastructure - Rework NAND buffers handling - Fix ECC requirements for K9F4G08U0D - Fix nand_do_read_oob() to return the number of bitflips - Mark K9F1G08U0E as not supporting subpage writes NAND driver changes: - MTK: Rework the driver to support new IP versions - OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support - Marvell: Add a new driver to replace the pxa3xx one SPI NOR core changes: - Add support to new ISSI and Cypress/Spansion memory parts. - Fix support of Micron memories by checking error bits in the FSR. - Fix update of block-protection bits by reading back the SR. - Restore the internal state of the SPI flash memory when removing the device. SPI NOR driver changes: - Maintenance for Freescale, Intel and Metiatek drivers. - Add support of the direct access mode for the Cadence QSPI controller" * tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits) mtd: nand: sunxi: Fix ECC strength choice mtd: nand: gpmi: Fix subpage reads mtd: nand: Fix build issues due to an anonymous union mtd: nand: marvell: Fix missing memory allocation modifier mtd: nand: marvell: remove redundant variable 'oob_len' mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed" mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe() mtd: Remove duplicate checks on mtd_oob_ops parameter mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: mtdpart: Make ECC stat handling consistent mtd: onenand: omap2: print resource using %pR format string mtd: mtk-nor: modify functions' name more generally mtd: onenand: samsung: remove incorrect __iomem annotation MAINTAINERS: Add entry for Marvell NAND controller driver ARM: OMAP2+: Remove gpmc-onenand mtd: onenand: omap2: Configure driver from DT mtd: onenand: omap2: Decouple DMA enabling from INT pin availability mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific mtd: onenand: omap2: Convert to use dmaengine for memcpy mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation ...
2018-01-29Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
Pull NAND changes from Boris Brezillon: " Core changes: * Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks * Introduce the ->exec_op() infrastructure * Rework NAND buffers handling * Fix ECC requirements for K9F4G08U0D * Fix nand_do_read_oob() to return the number of bitflips * Mark K9F1G08U0E as not supporting subpage writes Driver changes: * MTK: Rework the driver to support new IP versions * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support * Marvell: Add a new driver to replace the pxa3xx one "
2018-01-29Merge tag 'spi-nor/for-4.16' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
Pull spi-nor changes from Cyrille Pitchen: " This pull-request contains the following notable changes: Core changes: * Add support to new ISSI and Cypress/Spansion memory parts. * Fix support of Micron memories by checking error bits in the FSR. * Fix update of block-protection bits by reading back the SR. * Restore the internal state of the SPI flash memory when removing the device. Driver changes: * Maintenance for Freescale, Intel and Metiatek drivers. * Add support of the direct access mode for the Cadence QSPI controller. "
2018-01-25mtd: nand: sunxi: Fix ECC strength choiceMiquel Raynal
When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Cc: <stable@vger.kernel.org> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-25mtd: nand: gpmi: Fix subpage readsBoris Brezillon
Commit 25f815f66a14 ("mtd: nand: force drivers to explicitly send READ/PROG commands") added a call to nand_read_page_op() in gpmi_ecc_read_page(), which means this function now sends a READ0 command and place the data pointer at the beginning of the page. This logic is breaking gpmi_ecc_read_subpage() which was calling gpmi_ecc_read_page() and expected it to only retrieve the data without sending the READ0 command. Create a gpmi_ecc_read_page_data() helper which only does the data retrieval and ECC correction steps and implement gpmi_ecc_read_page() as a wrapper that calls nand_read_page_op()+gpmi_ecc_read_page_data(). This way, gpmi_ecc_read_subpage() can call gpmi_ecc_read_page_data() which restores the logic we had before commit 25f815f66a14 ("mtd: nand: force drivers to explicitly send READ/PROG commands"). Fixes: 25f815f66a14 ("mtd: nand: force drivers to explicitly send READ/PROG commands") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Han Xu <han.xu@nxp.com>
2018-01-20mtd: nand: Fix build issues due to an anonymous unionMiquel Raynal
GCC-4.4.4 raises errors when assigning a parameter in an anonymous union, leading to this kind of failure: drivers/mtd/nand/marvell_nand.c:1936: warning: missing braces around initializer warning: (near initialization for '(anonymous)[1].<anonymous>') error: unknown field 'data' specified in initializer error: unknown field 'addr' specified in initializer Work around the situation by naming these unions. Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Tested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-20mtd: nand: marvell: Fix missing memory allocation modifierMiquel Raynal
The function marvell_nfc_init_dma() allocates a DMA buffer without the GFP_KERNEL modifier, that triggers this warning: "marvell_nfc_init_dma() error: no modifiers for allocation." Fix this by using (GFP_KERNEL | GFP_DMA) instead of only GFP_DMA as the probe happens in non-interrupt context. Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-19mtd: nand: marvell: remove redundant variable 'oob_len'Colin Ian King
Variable oob_len is assigned and never read, hence it is redundant and can be removed. Cleans up clang warnings: drivers/mtd/nand/marvell_nand.c:1356:6: warning: Value stored to 'oob_len' during its initialization is never read drivers/mtd/nand/marvell_nand.c:1369:4: warning: Value stored to 'oob_len' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-19mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"Colin Ian King
Trivial fix to spelling mistakes in dev_err error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-19mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-18ubi: block: Fix locking for idr_alloc/idr_removeBradley Bolen
This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42f3a4 ("UBI: block: Dynamically allocate minor numbers") Cc: stable@vger.kernel.org Signed-off-by: Bradley Bolen <bradleybolen@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18mtd: ubi: wl: Fix error return code in ubi_wl_init()Wei Yongjun
Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623f45b ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18ubi: Fix copy/paste error in function documentationSascha Hauer
The function documentation of leb_write_trylock is copied from leb_write_lock. Replace the function name with the correct one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18ubi: Fastmap: Fix typoSascha Hauer
Fix misspelling of 'available' in function name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Erase outdated anchor PEBs during attachSascha Hauer
The fastmap update code might erase the current fastmap anchor PEB in case it doesn't find any new free PEB. When a power cut happens in this situation we must not have any outdated fastmap anchor PEB on the device, because that would be used to attach during next boot. The easiest way to make that sure is to erase all outdated fastmap anchor PEBs synchronously during attach. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Richard Weinberger <richard@nod.at> Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Clean up the initialization of pointer pColin Ian King
The pointer p is being initialized with one value and a few lines later being set to a newer replacement value. Clean up the code by using the latter assignment to p as the initial value. Cleans up clang warning: drivers/mtd/ubi/fastmap.c:217:19: warning: Value stored to 'p' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Use kmem_cache_free to deallocate memoryPan Bian
Memory allocated by kmem_cache_alloc() should not be deallocated with kfree(). Use kmem_cache_free() instead. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: Fix race condition between ubi volume creation and udevClay McClure
Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by: Clay McClure <clay@daemons.net> Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17mtd: ubi: Use 'max_bad_blocks' to compute bad_peb_limit if availableJeff Westfahl
If the user has not set max_beb_per1024 using either the cmdline or Kconfig options for doing so, use the MTD function 'max_bad_blocks' to compute the UBI bad_peb_limit. Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Boris Brezillon <boris.brezillon@free-electron.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-16mtd: Remove duplicate checks on mtd_oob_ops parameterBoris Brezillon
Some of the check done in custom ->_read/write_oob() implementation are already done by the core (in mtd_check_oob_ops()). Suggested-by: Peter Pan <peterpansjtu@gmail.com> [Remove redundant checks done in mtdpart.c] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Ladislav Michl <ladis@linux-mips.org>
2018-01-16mtd: Fallback to ->_read/write_oob() when ->_read/write() is missingBoris Brezillon
Some MTD sublayers/drivers are implementing ->_read/write_oob() and provide dummy wrappers for their ->_read/write() implementations. Let the core handle this case instead of duplicating the logic. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@free-electrons.com> Tested-by: Ladislav Michl <ladis@linux-mips.org>
2018-01-16mtd: mtdpart: Make ECC stat handling consistentBoris Brezillon
part_read() and part_read_oob() were counting ECC failures and bitflips differently. Adjust part_read_oob() to mimic what is done in part_read(). This is needed to use ->_read_oob() as a fallback when when ->_read() is not implemented. Note that bitflips and ECC failure accounting on MTD partitions is broken by design, because nothing prevents concurrent accesses to the underlying master MTD device between the moment we save the stats in a local variable and the moment master->_read[_oob]() returns. It's not something that can easily be fixed, so leave it like that for now. Suggested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Ladislav Michl <ladis@linux-mips.org>
2018-01-16mtd: onenand: omap2: print resource using %pR format stringArnd Bergmann
The omap2 onenand driver is now available for compile-testing, which uncovers a warning in configurations that have a 64-bit resource_size_t: drivers/mtd/onenand/omap2.c: In function 'omap2_onenand_probe': drivers/mtd/onenand/omap2.c:536:54: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] dev_err(dev, "Cannot reserve memory region at 0x%08x, size: 0x%x\n", drivers/mtd/onenand/omap2.c:536:66: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] Changing the format string to the special %pR simplifies the code and lets it do the right thing in that configuration, while avoiding the warning. Fixes: a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-14mtd: mtk-nor: modify functions' name more generallyGuochun Mao
Since more and more Mediatek's SoC can use this driver to control spi-nor flash, functions' name with "mt8173_" is no longer properly. Replacing "mt8173_" with "mtk_" will be more accurate to describe these functions' usable scope. Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-01-14mtd: onenand: samsung: remove incorrect __iomem annotationChristophe JAILLET
'page_buf' and 'oob_buf' are allocated with 'devm_kzalloc()' and should not have __iomem decoration. Remove these decorations and some useless casting. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-04-15 10:27:12 +0000